coiOpticalControllerTXLowThreshold
CISCO-OPTICAL-MIB ·
.1.3.6.1.4.1.9.9.828.1.1.2.1.8
Object
column
r/w
1/100 dBm CoiOpticalPower
This object is used to configure the Transmit Low Threshold in 1/100 dBm on optical channel interfaces.
Context
- MIB
- CISCO-OPTICAL-MIB
- OID
.1.3.6.1.4.1.9.9.828.1.1.2.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Units
- 1/100 dBm
- Parent
- coiOpticalControllerEntry
- Table
- coiOpticalControllerTable
- Siblings
- 14
Syntax
1/100 dBm CoiOpticalPower
- Source
- CoiOpticalPower
- Base type
Integer32
Values & Constraints
Type Constraints
range: -4000..3000
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| coiOpticalControllerWavelength This object is used to configure the wavelength on
optical channel interfaces in 1/100 nm. | column | 1/100 nm CoiOpticalWavelength | .1.3.6.1.4.1.9.9.828.1.1.2.1.1 |
| coiOpticalControllerTXHighThreshold This object is used to configure the Transmit High Threshold
in 1/100 dBm on optical channel interfaces. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.1.2.1.10 |
| coiOpticalControllerLBCHighThreshold This object is used to configure the Laser Bias Current High
Threshold in 1/10% on optical channel interfaces. | column | 1/10 % Integer32 | .1.3.6.1.4.1.9.9.828.1.1.2.1.11 |
| coiOpticalControllerStatus This object indicates the current defect status of the Optics
layer.
noDefect(0): No Defect. This bit is set high when no
defect is detected on the optics… | column | Bits | .1.3.6.1.4.1.9.9.828.1.1.2.1.12 |
| coiOpticalControllerPortType This object gives the port type of the optical interface. | column | CoiPortType | .1.3.6.1.4.1.9.9.828.1.1.2.1.13 |
| coiOpticalControllerTotalRXPower This object is used to configure the total receive power in
1/100 dBm on optical channel interfaces. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.1.2.1.14 |
| coiOpticalControllerTotalTXPower This object is used to configure the total transmit power
in 1/100 dBm on optical channel interfaces. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.1.2.1.15 |
| coiOpticalControllerLaserStatus This object gives the current operational state of the Laser.
Valid values are -
'up' - The laser is operational.
'down' - The laser is not operational. | column | Enumeration | .1.3.6.1.4.1.9.9.828.1.1.2.1.2 |
| coiOpticalControllerFrequency This object is used to configure the frequency on optical
channel interfaces in 100 MHz. | column | 100 MHz SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.828.1.1.2.1.3 |
| coiOpticalControllerChannelNumber This object is used to configure the channel number on
optical channel interfaces. Channel Number is set to 0 if not
50GHz grid. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.9.9.828.1.1.2.1.4 |
| coiOpticalControllerTransmitPower This object is used to configure the Transmit Power in
1/100 dBm on optical channel interfaces. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.1.2.1.5 |
| coiOpticalControllerOpticsType This object gives the description of optics present on optical
channel interfaces. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.9.9.828.1.1.2.1.6 |
| coiOpticalControllerRXLowThreshold This object is used to configure the Receive Low Threshold in
1/100 dBm on optical channel interfaces. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.1.2.1.7 |
| coiOpticalControllerRXHighThreshold This object is used to configure the Receive High Threshold in
1/100 dBm on optical channel interfaces. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.1.2.1.9 |