coiOptThreshChromaticDispersionMax

CISCO-OPTICAL-MIB · .1.3.6.1.4.1.9.9.828.1.2.1.1.15
MIB view Table view

Object

column r/w ps/nm SNMPv2-SMIInteger32 
This object is used to configure the threshold of maximum
measure of spread of light pulse for the interface in ps/nm.

Context

MIB
CISCO-OPTICAL-MIB
OID
.1.3.6.1.4.1.9.9.828.1.2.1.1.15
Type
column
Access
readwrite
Status
current
Units
ps/nm
Parent
coiOpticalThresholdEntry
Table
coiOpticalThresholdTable
Siblings
40

Syntax

ps/nm SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
coiOptThreshIntervalType
This object gives the interval type during which the performance statistics are accumulated for the interface.
columnCoiIntervalType.1.3.6.1.4.1.9.9.828.1.2.1.1.1
coiOptThreshPhaseNoiseMin
This object is used to configure the threshold of minimum Fluctuations in the Phase of a Waveform for the interface in 1/1000 dB.
column1/1000 dB SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.1.1.10
coiOptThreshLBCMin
This object is used to configure the threshold of minumum Laser Bias Current in 1/10%.
column1/10 % Integer32.1.3.6.1.4.1.9.9.828.1.2.1.1.11
coiOptThreshTXPowerMax
This object is used to configure the threshold of maximum Transmit power for the interface in 1/100 dBm.
column1/100 dBm CoiOpticalPower.1.3.6.1.4.1.9.9.828.1.2.1.1.12
coiOptThreshRXPowerMax
This object is used to configure the threshold of maximum Receive power for the interface in 1/100 dBm.
column1/100 dBm CoiOpticalPower.1.3.6.1.4.1.9.9.828.1.2.1.1.13
coiOptThreshOSNRMax
This object is used to configure the threshold of maximum Optical Signal to Noise Ratio for the interface in 1/100 dB.
column1/100 dB SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.1.1.14
coiOptThreshDifferentialGroupDelayMax
This object is used to configure the threshold of maximum propagation time difference between eigenmodes X and Y for the interface in 1/100 ps.
column1/100 ps SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.1.1.16
coiOptThreshSecondOrderPMDMax
This object is used to configure the threshold of maximum Second Order Polarization Mode Dispersion for the interface in 1/100 ps^2.
column1/100 ps^2 SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.1.1.17
coiOptThreshPolarizationDependentLossMax
This object is used to configure the threshold of maximum Polarization Dependent Loss for the interface in 1/100 dB.
column1/100 dB SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.1.1.18
coiOptThreshPolarizationChangeRateMax
This object is used to configure the threshold of maximum Polarization Change Rate in 1/100 rad/s for the interface.
column1/100 rad/s SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.1.1.19
coiOptThreshTXPowerMin
This object is used to configure the threshold of minimum Transmit power for the interface in 1/100 dBm.
column1/100 dBm CoiOpticalPower.1.3.6.1.4.1.9.9.828.1.2.1.1.2
coiOptThreshPhaseNoiseMax
This object is used to configure the threshold of maximum Fluctuations in the Phase of a Waveform in 1/1000 dB for the interface.
column1/1000 dB SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.1.1.20
coiOptThreshLBCMax
This object is used to configure the threshold of maximum Laser Bias Current in 1/10 % for the interface.
column1/10 % Integer32.1.3.6.1.4.1.9.9.828.1.2.1.1.21
coiOptThreshTXPowerEnableMin
This object is used to configure the enablement of threshold min Transmit power for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.22
coiOptThreshRXPowerEnableMin
This object is used to configure the enablement of the threshold min Receive power for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.23
coiOptThreshOSNREnableMin
This object is used to configure the enablement of the threshold min Optical Signal to Noise Ratio for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.24
coiOptThreshChromaticDispersionEnableMin
This object is used to configure the enablement of the threshold min measure of spread of light pulse for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.25
coiOptThreshDifferentialGroupDelayEnableMin
This object is used to configure the enablement of the threshold min propagation time difference between eigenmodes X and Y for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.26
coiOptThreshSecondOrderPMDEnableMin
This object is used to configure the enablement of the threshold min Second Order Polarization Mode Dispersion for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.27
coiOptThreshPolarizationDependentLossEnableMin
This object is used to configure the enablement of the threshold min Polarization Dependent Loss for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.28
coiOptThreshPolarizationChangeRateEnableMin
This object is used to configure the enablement of the threshold min Polarization Change Rate for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.29
coiOptThreshRXPowerMin
This object is used to configure the threshold of minimum Receive power for the interface in 1/100 dBm.
column1/100 dBm CoiOpticalPower.1.3.6.1.4.1.9.9.828.1.2.1.1.3
coiOptThreshPhaseNoiseEnableMin
This object is used to configure the enablement of the threshold min Fluctuations in the Phase of a Waveform for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.30
coiOptThreshLBCEnableMin
This object is used to configure the enablement of the threshold min Laser Bias Current for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.31
coiOptThreshTXPowerEnableMax
This object is used to configure the enablement of the threshold max Transmit power for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.32
coiOptThreshRXPowerEnableMax
This object is used to configure the enablement of the threshold max Receive power for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.33
coiOptThreshOSNREnableMax
This object is used to configure the enablement of the threshold max Optical Signal to Noise Ratio for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.34
coiOptThreshChromaticDispersionEnableMax
This object is used to configure the enablement of the threshold max measure of spread of light pulse for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.35
coiOptThreshDifferentialGroupDelayEnableMax
This object is used to configure the enablement of the threshold max propagation time difference between eigenmodes X and Y for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.36
coiOptThreshSecondOrderPMDEnableMax
This object is used to configure the enablement of the threshold max Second Order Polarization Mode Dispersion for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.37
coiOptThreshPolarizationDependentLossEnableMax
This object is used to configure the enablement of the threshold max Polarization Dependent Loss for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.38
coiOptThreshPolarizationChangeRateEnableMax
This object is used to configure the enablement of the threshold max Polarization Change Rate for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.39
coiOptThreshOSNRMin
This object is used to configure the threshold of minimum Optical Signal to Noise Ratio for the interface in 1/100 dB.
column1/100 dB SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.1.1.4
coiOptThreshPhaseNoiseEnableMax
This object is used to configure the enablement of the threshold max Fluctuations in the Phase of a Waveform for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.40
coiOptThreshLBCEnableMax
This object is used to configure the enablement of the threshold max Laser Bias Current for the interface.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.9.9.828.1.2.1.1.41
coiOptThreshChromaticDispersionMin
This object is used to configure the threshold of minimum measure of spread of light pulse for the interface in ps/nm.
columnps/nm SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.1.1.5
coiOptThreshDifferentialGroupDelayMin
This object is used to configure the threshold of minimum propagation time difference between eigenmodes X and Y for the interface in 1/100 ps.
column1/100 ps SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.1.1.6
coiOptThreshSecondOrderPMDMin
This object is used to configure the threshold of minimum Second Order Polarization Mode Dispersion for the interface in 1/100 ps^2.
column1/100 ps^2 SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.1.1.7
coiOptThreshPolarizationDependentLossMin
This object is used to configure the threshold of minimum Polarization Dependent Loss for the interface in 1/100 dB.
column1/100 dB SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.1.1.8
coiOptThreshPolarizationChangeRateMin
This object is used to configure the threshold of minimum Polarization Change Rate for the interface in 1/100 rad/s.
column1/100 rad/s SNMPv2-SMIInteger32.1.3.6.1.4.1.9.9.828.1.2.1.1.9