coiOptIntervalLane
CISCO-OPTICAL-MIB ·
.1.3.6.1.4.1.9.9.828.1.2.3.1.1
Object
column
Integer32
This object specifies the lane number for the optical interface. Each optical controller is divided into data lanes with each lane operating at some data rate, giving an aggregated bandwidth of the controller as a whole.Lane is applicable for breakout mode of operation.
Context
- MIB
- CISCO-OPTICAL-MIB
- OID
.1.3.6.1.4.1.9.9.828.1.2.3.1.1- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- coiOpticalIntervalEntry
- Table
- coiOpticalIntervalTable
- Siblings
- 33
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-12
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| coiOptIntervalPolarizationDependentLossMax This object specifies the interval maximum Polarization
Dependent Loss in 1/100 dB for the interface. | column | 1/100 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.10 |
| coiOptIntervalPolarizationChangeRateMax This object specifies the interval maximum Polarization Change
Rate in 1/100 rad/s for the interface. | column | 1/100 rad/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.11 |
| coiOptIntervalPhaseNoiseMax This object specifies the interval maximum Fluctuations in
the Phase of a Waveform in 1/1000 dB for the interface. | column | 1/1000 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.12 |
| coiOptIntervalLBCMax This object specifies the interval maximum Laser Bias Current
in 1/10% for the interface. | column | 1/10 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.13 |
| coiOptIntervalTXPowerMin This object specifies the interval minimum Transmit power in
1/100 dBm for the interface. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.2.3.1.14 |
| coiOptIntervalRXPowerMin This object specifies the interval minimum Receive power in
1/100 dBm for the interface. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.2.3.1.15 |
| coiOptIntervalOSNRMin This object specifies the interval minimum Optical Signal to
Noise Ratio in 1/100 dB for the interface. | column | 1/100 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.16 |
| coiOptIntervalChromaticDispersionMin This object specifies the interval minimum measure of spread
of light pulse in ps/nm for the interface. | column | ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.17 |
| coiOptIntervalDifferentialGroupDelayMin This object specifies the interval minimum propagation time
difference between eigenmodes X and Y in 1/100 ps for the
interface. | column | 1/100 ps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.18 |
| coiOptIntervalSecondOrderPMDMin This object specifies the interval minimum Second Order
Polarization Mode Dispersion in 1/100 ps^2 for the interface. | column | 1/100 ps^2 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.19 |
| coiOptIntervalIntervalType This object gives the interval type during which the
performance statistics are accumulated. | column | CoiIntervalType | .1.3.6.1.4.1.9.9.828.1.2.3.1.2 |
| coiOptIntervalPolarizationDependentLossMin This object specifies the interval minimum Polarization
Dependent Loss in 1/100 dB for the interface. | column | 1/100 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.20 |
| coiOptIntervalPolarizationChangeRateMin This object specifies the interval minimum Polarization Change
Rate in 1/100 rad/s for the interface. | column | 1/100 rad/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.21 |
| coiOptIntervalPhaseNoiseMin This object specifies the interval minimum Fluctuations in the
Phase of a Waveform in 1/1000 dB for the interface. | column | 1/1000 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.22 |
| coiOptIntervalLBCMin This object specifies the interval minimum Laser Bias Current
in 1/10% for the interface. | column | 1/10 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.23 |
| coiOptIntervalTXPowerAvg This object specifies the interval average Transmit power in
1/100 dBm for the interface. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.2.3.1.24 |
| coiOptIntervalRXPowerAvg This object specifies the interval average Receive power in
1/100 dBm for the interface. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.2.3.1.25 |
| coiOptIntervalOSNRAvg This object specifies the interval average Optical Signal to
Noise Ratio in 1/100 dB for the interface. | column | 1/100 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.26 |
| coiOptIntervalChromaticDispersionAvg This object specifies the interval average measure of spread
of light pulse in ps/nm for the interface. | column | ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.27 |
| coiOptIntervalDifferentialGroupDelayAvg This object specifies the interval average propagation time
difference between eigenmodes X and Y in 1/100 ps for the
interface. | column | 1/100 ps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.28 |
| coiOptIntervalSecondOrderPMDAvg This object specifies the interval average Second Order
Polarization Mode Dispersion in 1/100 ps^2 for the interface. | column | 1/100 ps^2 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.29 |
| coiOptIntervalNum This object identifies the interval for which the set of
interval performance values is available.
The interval identified by 1 is the most recent 15 minute
or 24 hour interval, a… | column | Integer32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.3 |
| coiOptIntervalPolarizationDependentLossAvg This object specifies the interval average Polarization
Dependent Loss in 1/100 dB for the interface. | column | 1/100 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.30 |
| coiOptIntervalPolarizationChangeRateAvg This object specifies the interval average Polarization Change
Rate in 1/100 rad/s for the interface. | column | 1/100 rad/s SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.31 |
| coiOptIntervalPhaseNoiseAvg This object specifies the interval average Fluctuations in
the Phase of a Waveform in 1/1000 dB for the interface. | column | 1/1000 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.32 |
| coiOptIntervalLBCAvg This object specifies the interval average Laser Bias Current
in 1/10 % for the interface. | column | 1/10 % SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.33 |
| coiOptIntervalTimestamp This object specifies the timestamp, for the bucket specified
by 'coiOptIntervalNum', for the interface. | column | OctetString | .1.3.6.1.4.1.9.9.828.1.2.3.1.34 |
| coiOptIntervalTXPowerMax This object specifies the interval maximum Transmit power in
1/100 dBm for the interface. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.2.3.1.4 |
| coiOptIntervalRXPowerMax This object specifies the interval maximum Receive power in
1/100 dBm for the interface. | column | 1/100 dBm CoiOpticalPower | .1.3.6.1.4.1.9.9.828.1.2.3.1.5 |
| coiOptIntervalOSNRMax This object specifies the interval maximum Optical Signal to
Noise Ratio in 1/100 dB for the interface. | column | 1/100 dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.6 |
| coiOptIntervalChromaticDispersionMax This object specifies the interval maximum measure of spread
of light pulse for the interface in ps/nm. | column | ps/nm SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.7 |
| coiOptIntervalDifferentialGroupDelayMax This object specifies the interval maximum propagation time
difference between eigenmodes X and Y for the interface in
1/100 ps. | column | 1/100 ps SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.8 |
| coiOptIntervalSecondOrderPMDMax This object specifies the interval maximum Second Order
Polarization Mode Dispersion in 1/100 ps^2 for the interface. | column | 1/100 ps^2 SNMPv2-SMIInteger32 | .1.3.6.1.4.1.9.9.828.1.2.3.1.9 |