ACLMGMT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
28
Rows
28
Columns
395

swACLEthernetTable

table
.1.3.6.1.4.1.171.12.9.2.1 · 1 row entry · 12 columns
Open in standard view 
This table contains ACL mask Ethernet information.
The access profile will be created on the switch to define which
part of each incoming frame's layer 2 header will be examined
by the switch. Masks entered will be combined with the
values the switch finds in the specified frame header fields.
swACLEthernetEntry entry .1.3.6.1.4.1.171.12.9.2.1.1
A list of information about the ACL for Ethernet.
Indexes
swACLEthernetProfileID
Column Syntax OID
swACLEthernetProfileID
The ID of the ACL mask entry unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.2.1.1.1
swACLEthernetUsevlan
Specifies that the switch will examine the VLAN part of each packet header.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.2.1.1.2
swACLEthernetMacAddrMaskState
This object indicates the status of the MAC address mask.
other (1) - Neither source MAC address nor destination MAC address are masked.
dst-mac-addr (2) - Destination MAC addresses within received frames are
to be …
Enumerationr/w
Enumerated Values:
1other
2dst-mac-addr
3src-mac-addr
4dst-src-mac-addr
 .1.3.6.1.4.1.171.12.9.2.1.1.3
swACLEthernetSrcMacAddrMask
This object specifies the MAC address mask for the source MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.2.1.1.4
swACLEthernetDstMacAddrMask
This object specifies the MAC address mask for the destination MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.2.1.1.5
swACLEthernetUse8021p
Specifies if the switch will examine the 802.1p priority value in the frame's header
or not.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.2.1.1.6
swACLEthernetUseEthernetType
Specifies if the switch will examine the Ethernet type value in each frame's header
or not.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.2.1.1.7
swACLEthernetRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.2.1.1.8
swACLEthernetOwner
The owner of the ACL mask entry. The type of ACL entry created. ACL type
entries can only be modified when being configured through the same
type command. For example IP-MAC Binding entries can only be modified
or delet…
Enumeration
Enumerated Values:
1any
2acl
3ipbind
4other
5dhcp
6netbios
7ext-netbios
8ismvlan
9dhcp-relay
10pppoe
11arp-spoofing
12bpdu-tunnel
 .1.3.6.1.4.1.171.12.9.2.1.1.9
swACLEthernetUnusedRuleEntries
The number of unused rule entries of this Ethernet profile entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.2.1.1.10
swACLEthernetProfileName
The name of the ACL mask entry unique to the mask list.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.12.9.2.1.1.11
swACLEthernetVlanMask
The mask used for the VLAN ID.
Valid values are from 0x0000 to 0x0FFF.
Default value is 0x0FFF
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.2.1.1.12

swACLIpTable

table
.1.3.6.1.4.1.171.12.9.2.2 · 1 row entry · 24 columns
Open in standard view 
This table contains the ACL mask for IP information.
Access profiles will be created on the switch to define which
part of the incoming frame's IP layer packet header will be
examined by the switch. Masks entered will be combined
with the values the switch finds in the specified frame
header fields.
swACLIpEntry entry .1.3.6.1.4.1.171.12.9.2.2.1
A list of information about the ACL of the IP Layer.
Indexes
swACLIpProfileID
Column Syntax OID
swACLIpProfileID
The ID of the ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.2.2.1.1
swACLIpUsevlan
This object indicates if the IP layer VLAN part is examined or not.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.2.2.1.2
swACLIpIpAddrMaskState
This object indicates the status of IP address mask.

other (1) - Neither source IP address nor destination IP address are
masked.
dst-ip-addr (2) - Destination IP addresses within received frames
ar…
Enumerationr/w
Enumerated Values:
1other
2dst-ip-addr
3src-ip-addr
4dst-src-ip-addr
 .1.3.6.1.4.1.171.12.9.2.2.1.3
swACLIpSrcIpAddrMask
This object specifies the IP address mask for the source IP address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.9.2.2.1.4
swACLIpDstIpAddrMask
This object specifies the IP address mask for the destination IP address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.9.2.2.1.5
swACLIpUseDSCP
This object indicates if the DSCP protocol in the packet header
is to be examined or not.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.2.2.1.6
swACLIpUseProtoType
That object indicates which protocol will be examined.
Enumerationr/w
Enumerated Values:
1none
2icmp
3igmp
4tcp
5udp
6protocolId
 .1.3.6.1.4.1.171.12.9.2.2.1.7
swACLIpIcmpOption
This object indicates which fields are defined for ICMP.
none (1)- Both fields are null.
type (2)- Type field identified.
code (3)- Code field identified.
type-code (4)- Both ICMP fields identified.
Enumerationr/w
Enumerated Values:
1none
2type
3code
4type-code
 .1.3.6.1.4.1.171.12.9.2.2.1.8
swACLIpIgmpOption
Indicates if the IGMP options field is identified or not.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.12.9.2.2.1.9
swACLIpTcpOption
This object indicates the status of the filtered address of TCP.

other (1) - Neither source port nor destination port are
masked.
dst-addr (2) - Packets will be filtered if this destination port
is …
Enumerationr/w
Enumerated Values:
1other
2dst-addr
3src-addr
4dst-src-addr
 .1.3.6.1.4.1.171.12.9.2.2.1.10
swACLIpUdpOption
This object indicates the status of the filtered address of UDP .

other (1) - Neither source port nor destination port are
masked.
dst-addr (2) - Packets will be filtered if this destination port
is…
Enumerationr/w
Enumerated Values:
1other
2dst-addr
3src-addr
4dst-src-addr
 .1.3.6.1.4.1.171.12.9.2.2.1.11
swACLIpTCPorUDPSrcPortMask
Specifies a TCP port mask for the source port if swACLIpUseProtoType is TCP
Specifies a UDP port mask for the source port if swACLIpUseProtoType is UDP.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.2.2.1.12
swACLIpTCPorUDPDstPortMask
Specifies a TCP port mask for the destination port if swACLIpUseProtoType is TCP
Specifies a UDP port mask for the destination port if swACLIpUseProtoType is UDP.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.2.2.1.13
swACLIpTCPFlagBit
Specifies a TCP connection flag mask.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.12.9.2.2.1.14
swACLIpTCPFlagBitMask
A value which indicates the set of TCP flags that this
entity may potentially offer. The value is a sum of flag bits.
This sum initially takes the value zero. Then, for each flag, L,
is added in the range 1 through 6, f…
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.12.9.2.2.1.15
swACLIpProtoIDOption
Specifies if the switch will examine each frame's protocol ID field or not.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.12.9.2.2.1.16
swACLIpProtoID
Specifies that the rule applies to the IP protocol ID behind the IP header.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.12.9.2.2.1.17
swACLIpProtoIDMask
Specifies that the rule applies to the IP protocol ID and the mask options
behind the IP header.
OctetStringr/w
Constraints:
range: 20-20
 .1.3.6.1.4.1.171.12.9.2.2.1.18
swACLIpRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.2.2.1.19
swACLIpOwner
The owner of the ACL mask entry. The type of ACL entry created. ACL type
entries can only be modified when being configured through the same
type command. For example, IP-MAC Binding entries can only be modified
or dele…
Enumeration
Enumerated Values:
1any
2acl
3ipbind
4other
5dhcp
6netbios
7ext-netbios
8ismvlan
9dhcp-relay
10pppoe
11arp-spoofing
12bpdu-tunnel
 .1.3.6.1.4.1.171.12.9.2.2.1.20
swACLIpSrcMacAddrMask
This object specifies the MAC address mask for the source MAC address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.2.2.1.21
swACLIpUnusedRuleEntries
The number of unused rule entries this IP profile entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.2.2.1.22
swACLIpProfileName
The name of the ACL mask entry unique to the mask list.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.12.9.2.2.1.23
swACLIpVlanMask
The mask used for the VLAN ID.
Valid values are from 0x0000 to 0x0FFF.
Default value is 0x0FFF.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.2.2.1.24

swACLPktContMaskTable

table
.1.3.6.1.4.1.171.12.9.2.3 · 1 row entry · 10 columns
Open in standard view 
This table contains the ACL mask for user-defined information.
An access profile will be created on the switch to define which part
of each incoming frame's user-defined part of the packet header
will be examined by switch. Masks entered will be combined
 with the values the switch finds in the specified frame header fields.
swACLPktContMaskEntry entry .1.3.6.1.4.1.171.12.9.2.3.1
A list of information about user-defined ACLs.
Indexes
swACLPktContMaskProfileID
Column Syntax OID
swACLPktContMaskProfileID
The ID of the ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.2.3.1.1
swACLPktContMaskOffset0to15
Specifies that the rule applies to the packet content (Offset0to15) and
the mask options.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.2.3.1.2
swACLPktContMaskOffset16to31
Specifies that the rule applies to the packet content (Offset16to31) and
the mask options.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.2.3.1.3
swACLPktContMaskOffset32to47
Specifies that the rule applies to the packet content (Offset32to47) and
the mask options.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.2.3.1.4
swACLPktContMaskOffset48to63
Specifies that the rule applies to the packet content (Offset48to63) and
the mask options.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.2.3.1.5
swACLPktContMaskOffset64to79
Specifies that the rule applies to the packet content (Offset64to79) and
the mask options.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.2.3.1.6
swACLPktContMaskRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.2.3.1.7
swACLPktContMaskOwner
The owner of the ACL mask entry. The type of ACL entry created. ACL type
entries can only be modified when being configured through the same
type command. For example, IP-MAC Binding entries can only be modified
or dele…
Enumeration
Enumerated Values:
1any
2acl
3ipbind
4other
5dhcp
6netbios
7ext-netbios
8ismvlan
9dhcp-relay
10pppoe
11arp-spoofing
12bpdu-tunnel
 .1.3.6.1.4.1.171.12.9.2.3.1.8
swACLPktContMaskUnusedRuleEntries
The number of unused rule entries of this IP profile entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.2.3.1.9
swACLPktContMaskProfileName
The name of the ACL mask entry unique to the mask list.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.12.9.2.3.1.10

swACLIpv6MaskTable

table
.1.3.6.1.4.1.171.12.9.2.4 · 1 row entry · 15 columns
Open in standard view 
This table contains user-defined ACL mask information.
An access profile will be created on the switch to define which
parts of each incoming frame's IPv6 part of the packet header will
be examined by the switch. Masks entered will be combined
with the values the switch finds in the specified frame header fields.
swACLIpv6MaskEntry entry .1.3.6.1.4.1.171.12.9.2.4.1
A list of information about user-defined ACLs.
Indexes
swACLIpv6MaskProfileID
Column Syntax OID
swACLIpv6MaskProfileID
The ID of the ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.2.4.1.1
swACLIpv6MaskClass
Specifies that the rule applies to the IPv6 class field and the mask options.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.12.9.2.4.1.2
swACLIpv6MaskFlowlabel
Specifies that the rule applies to the IPv6 flowlabel field and the mask options.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.12.9.2.4.1.3
swACLIpv6IpAddrMaskState
This object indicates the status of the IPv6 address mask.

other (1) - Neither source IPv6 address nor destination IPv6 address are
masked.
dst-ipv6-addr (2) - Received frame destination IPv6 address …
Enumerationr/w
Enumerated Values:
1other
2dst-ipv6-addr
3src-ipv6-addr
4dst-src-ipv6-addr
 .1.3.6.1.4.1.171.12.9.2.4.1.4
swACLIpv6MaskSrcIpv6Mask
Specifies that the rule applies to the Source IPv6 address and the mask options.
This should be a 16 byte octet string.
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.12.9.2.4.1.5
swACLIpv6MaskDstIpv6Mask
Specifies that the rule applies to the Destination IPv6 address and the mask options.
This should be a 16 byte octet string.
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.12.9.2.4.1.6
swACLIpv6MaskRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.2.4.1.7
swACLIpv6MaskOwner
The owner of the ACL mask entry. The type of ACL entry created. ACL type
entries can only be modified when being configured through the same
type command. For example, IP-MAC Binding entries can only be modified
or dele…
Enumeration
Enumerated Values:
1any
2acl
3ipbind
4other
5dhcp
6netbios
7ext-netbios
8ismvlan
9dhcp-relay
10pppoe
11arp-spoofing
12bpdu-tunnel
 .1.3.6.1.4.1.171.12.9.2.4.1.8
swACLIpv6MaskUnusedRuleEntries
The number of unused rule entries of this IP profile entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.2.4.1.9
swACLIpv6MaskProfileName
The name of the ACL mask entry unique to the mask list.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.12.9.2.4.1.10
swACLIpv6MaskUseProtoType
That object indicates which protocol will be examined.
Enumerationr/w
Enumerated Values:
1none
2tcp
3udp
 .1.3.6.1.4.1.171.12.9.2.4.1.11
swACLIpv6MaskTcpOption
This object indicates the status of the filtered address of TCP.

other (1) - Neither source port nor destination port are
masked.
dst-addr (2) - Packets will be filtered if this destination port
is …
Enumerationr/w
Enumerated Values:
1other
2dst-addr
3src-addr
4dst-src-addr
 .1.3.6.1.4.1.171.12.9.2.4.1.12
swACLIpv6MaskUdpOption
This object indicates the status of the filtered address of UDP.

other (1) - Neither source port nor destination port is
masked.
dst-addr (2) - Packets will be filtered if this destination port
is i…
Enumerationr/w
Enumerated Values:
1other
2dst-addr
3src-addr
4dst-src-addr
 .1.3.6.1.4.1.171.12.9.2.4.1.13
swACLIpv6MaskTCPorUDPSrcPortMask
Specifies a TCP port mask for the source port if swACLIpv6MaskUseProtoType is TCP
Specifies a UDP port mask for the source port if swACLIpv6MaskUseProtoType is UDP.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.2.4.1.14
swACLIpv6MaskTCPorUDPDstPortMask
Specifies a TCP port mask for the destination port if swACLIpv6MaskUseProtoType is TCP
Specifies a UDP port mask for the destination port if swACLIpv6MaskUseProtoType is UDP.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.2.4.1.15

swIBPACLEthernetTable

table obsolete
.1.3.6.1.4.1.171.12.9.2.6 · 1 row entry · 2 columns
Open in standard view 
This table contains IP-MAC-Binding ACL mask Ethernet information.
Access profiles will be created on the switch by row creation and to
define which parts of each incoming frame's layer 2 header part
the switch will examine. Masks can be entered that will be combined
with the values the switch finds in the specified frame header fields.
swIBPACLEthernetEntry entry .1.3.6.1.4.1.171.12.9.2.6.1
A list of information about the Ethernet ACL.
Indexes
swIBPACLEthernetProfileID
Column Syntax OID
swIBPACLEthernetProfileID obsolete
The ID of the ACL mask entry, unique in the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.2.6.1.1
swIBPACLEthernetUseEthernetType obsolete
Specifies if the switch will examine the Ethernet type value in each frame's header
or not.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.2.6.1.2

swIBPACLIpTable

table obsolete
.1.3.6.1.4.1.171.12.9.2.7 · 1 row entry · 3 columns
Open in standard view 
This table contains IP-MAC-Binding IP ACL mask information.
Access profiles will be created on the switch by row creation and to
define which parts of each incoming frame's IP layer part of the header
the switch will examine. Masks can be entered that will be combined
with the values the switch finds in the specified frame header fields.
swIBPACLIpEntry entry .1.3.6.1.4.1.171.12.9.2.7.1
A list of information about the IP layer of the ACL.
Indexes
swIBPACLIpProfileID
Column Syntax OID
swIBPACLIpProfileID obsolete
The ID of the ACL mask entry, unique in the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.2.7.1.1
swIBPACLIpSrcMacAddrMask obsolete
This object specifies the MAC address mask for the source MAC address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.2.7.1.2
swIBPACLIpSrcIpAddrMask obsolete
This object specifies IP address masks for the source IP address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.9.2.7.1.3

swACLPktContMaskOptionTable

table
.1.3.6.1.4.1.171.12.9.2.8 · 1 row entry · 17 columns
Open in standard view 
This table contains the ACL mask for user-defined option information.
An access profile will be created on the switch to define which part
of each incoming frame's user-defined part of the packet header
will be examined by switch. Masks entered will be combined
with the values the switch finds in the specified frame header fields.
swACLPktContMaskOptionEntry entry .1.3.6.1.4.1.171.12.9.2.8.1
A list of information about the user-defined ACL.
Indexes
swACLPktContMaskOptionProfileID
Column Syntax OID
swACLPktContMaskOptionProfileID
The ID of the ACL mask entry, unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.2.8.1.1
swACLPktContMaskOffsetChunk1State
Specifies the state of chunk1.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.2.8.1.2
swACLPktContMaskOffsetChunk1OffsetValue
Specifies the frame content offset of chunk1.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.171.12.9.2.8.1.3
swACLPktContMaskOffsetChunk1Mask
Specifies the frame content mask of chunk1.
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.171.12.9.2.8.1.4
swACLPktContMaskOffsetChunk2State
Specifies the state of chunk2.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.2.8.1.5
swACLPktContMaskOffsetChunk2OffsetValue
Specifies the frame content offset of chunk2.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.171.12.9.2.8.1.6
swACLPktContMaskOffsetChunk2Mask
Specifies the frame content mask of chunk2.
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.171.12.9.2.8.1.7
swACLPktContMaskOffsetChunk3State
Specifies the state of chunk3.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.2.8.1.8
swACLPktContMaskOffsetChunk3OffsetValue
Specifies the frame content offset of chunk3.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.171.12.9.2.8.1.9
swACLPktContMaskOffsetChunk3Mask
Specifies the frame content mask of chunk3.
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.171.12.9.2.8.1.10
swACLPktContMaskOffsetChunk4State
Specifies the state of chunk4.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.2.8.1.11
swACLPktContMaskOffsetChunk4OffsetValue
Specifies the frame content offset of chunk4.
Integer32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.171.12.9.2.8.1.12
swACLPktContMaskOffsetChunk4Mask
Specifies the frame content mask of chunk4.
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.171.12.9.2.8.1.13
swACLPktContMaskOptionRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.2.8.1.14
swACLPktContMaskOptionOwner
The owner of the ACL mask entry. The type of ACL entry created. ACL type
entries can only be modified when being configured through the same
type command. For example, IP-MAC Binding entries can only be modified
or dele…
Enumeration
Enumerated Values:
1any
2acl
3ipbind
4other
5dhcp
6netbios
7ext-netbios
8ismvlan
9dhcp-relay
10pppoe
11arp-spoofing
12bpdu-tunnel
 .1.3.6.1.4.1.171.12.9.2.8.1.15
swACLPktContMaskOptionUnusedRuleEntries
The number of unused rule entries of this IP profile entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.2.8.1.16
swACLPktContMaskOptionProfileName
The name of the ACL mask entry unique to the mask list.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.12.9.2.8.1.17

swACLPktContMaskOption2Table

table
.1.3.6.1.4.1.171.12.9.2.10.1 · 1 row entry · 9 columns
Open in standard view 
This table contains the ACL mask for user-defined option 2 information.
An access profile will be created on the switch to define which part
of each incoming frame's user-defined part of the packet header
will be examined by switch. Masks entered will be combined
with the values the switch finds in the specified frame header fields.
          
To create a packet content field with respect to an offset, an entry in the
swACLPktContMaskOption2OffsetsTable must be created first. 
          
On row creation, all entries in the corresponding profile defined in the
swACLPktContMaskOption2OffsetsTable will be associated to the profile mask.
          
     If any rule is using the profile mask the entries cannot be modified.
swACLPktContMaskOption2Entry entry .1.3.6.1.4.1.171.12.9.2.10.1.1
A list of information about the user-defined ACL.
Indexes
swACLPktContMaskOption2ProfileID
Column Syntax OID
swACLPktContMaskOption2ProfileID
The ID of the ACL mask entry, unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.2.10.1.1.1
swACLPktContMaskOption2SrcMac
Specifies the mask for source MAC address
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.2.10.1.1.2
swACLPktContMaskOption2DstMac
Specifies the mask for destination MAC address
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.2.10.1.1.3
swACLPktContMaskOption2CTag
Specifies the mask for customer VLAN tag, valid values are only from 0x0000 to 0xFFFF.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.2.10.1.1.4
swACLPktContMaskOption2STag
Specifies the mask for service VLAN tag, valid values are only from 0x0000 to 0xFFFF.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.2.10.1.1.5
swACLPktContMaskOption2Owner
The owner of the ACL mask entry. The type of ACL entry created. ACL type
entries can only be modified when being configured through the same
type command. For example, IP-MAC Binding entries can only be modified
or dele…
Enumeration
Enumerated Values:
1any
2acl
3ipbind
4other
5dhcp
6netbios
7ext-netbios
8ismvlan
9dhcp-relay
10pppoe
11arp-spoofing
12bpdu-tunnel
 .1.3.6.1.4.1.171.12.9.2.10.1.1.6
swACLPktContMaskOption2UnusedRuleEntries
The number of unused rule entries of this IP profile entry.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.2.10.1.1.7
swACLPktContMaskOption2ProfileName
The name of the ACL mask entry unique to the mask list.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.12.9.2.10.1.1.8
swACLPktContMaskOption2RowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.2.10.1.1.9

swACLPktContMaskOption2OffsetsTable

table
.1.3.6.1.4.1.171.12.9.2.10.2 · 1 row entry · 6 columns
Open in standard view 
This table contains the ACL masks for the individual packet content offset user-defined option 2 information.
Entries created in this table will not set into the TCAM until a valid entry in the swACLPktContMaskOption2Table
is created.
          
If any rule is using the profile mask the entries cannot be modified.
.
swACLPktContMaskOption2OffsetsEntry entry .1.3.6.1.4.1.171.12.9.2.10.2.1
A list of information about the individual offsets for user-defined ACL.
Indexes
swACLPktContMaskOption2OffsetsProfileID swACLPktContMaskOption2OffsetsNum
Column Syntax OID
swACLPktContMaskOption2OffsetsProfileID
The ID of the ACL mask entry, unique to the mask list.
This is the profile id to which this packet content field entry will be associated to.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.2.10.2.1.1
swACLPktContMaskOption2OffsetsNum
Specifies the offset number with respect to the profile.
Integer32
Constraints:
range: 1-11
 .1.3.6.1.4.1.171.12.9.2.10.2.1.2
swACLPktContMaskOption2OffsetsReference
Specifies the reference of the offset.
L2 - The offset will start counting from the byte
after the end of the VLAN tags (start of ether type)
L3 - The offset will start counting right after the ether type field.
…
Enumerationr/w
Enumerated Values:
1l2
2l3
3l4
 .1.3.6.1.4.1.171.12.9.2.10.2.1.3
swACLPktContMaskOption2OffsetsValue
Specifies the amount of bytes from the reference to the packet content field
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.2.10.2.1.4
swACLPktContMaskOption2OffsetsMask
Specifies the mask for the packet content field
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.2.10.2.1.5
swACLPktContMaskOption2OffsetsRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.2.10.2.1.6

swACLEtherRuleTable

table
.1.3.6.1.4.1.171.12.9.3.1 · 1 row entry · 24 columns
Open in standard view 
This table contains Ethernet ACL information.
swACLEtherRuleEntry entry .1.3.6.1.4.1.171.12.9.3.1.1
A list of information about the ACL rule of the layer 2 part of each packet.
Indexes
swACLEtherRuleProfileID swACLEtherRuleAccessID
Column Syntax OID
swACLEtherRuleProfileID
The ID of the ACL rule entry, which is unique to the mask list.
The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.3.1.1.1
swACLEtherRuleAccessID
The ID of the the ACL rule entry relates to the swACLEtherRuleProfileID.
When row creation is set to 0, assignment of an Access ID for ports is automatic
and the swACLEtherRulePort creates Rule entries for the swACLEthe…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.9.3.1.1.2
swACLEtherRuleVlan
Specifies that the access rule will only apply to the packet with the VLAN ID indexed by this VLAN name.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.12.9.3.1.1.3
swACLEtherRuleSrcMacAddress
Specifies that the access rule will apply to only packets with
this source MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.3.1.1.4
swACLEtherRuleDstMacAddress
Specifies that the access rule will apply to only packets
with this destination MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.3.1.1.5
swACLEtherRule8021P
Specifies that the access rule will apply only to packets with
this 802.1p priority value. A value of -1 indicates that this node
is not actively used.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.171.12.9.3.1.1.6
swACLEtherRuleEtherType
Specifies that the access rule will apply only to packets with this
hexadecimal 802.1Q Ethernet type value in the packet header.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.3.1.1.7
swACLEtherRuleEnablePriority
Specifies that the access rule will apply only to packets with
priority value.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.1.1.8
swACLEtherRulePriority
Specifies that the priority will be changed in packets while the swACLEtherRuleEnablePriority
is enabled .
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.12.9.3.1.1.9
swACLEtherRuleReplacePriority
Specifies if the switch will change priorities of packets that match the access profile
802.1p priority tag field or not .
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.1.1.10
swACLEtherRuleEnableReplaceDscp
Specifies if the switch will change priorities of packets that match the access profile
DSCP field or not.
Replace DSCP and replace ToS precedence can not both be supported.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.1.1.11
swACLEtherRuleRepDscp
Specifies a value to be written to the DSCP field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in the DSCP field of the packet.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.12.9.3.1.1.12
swACLEtherRulePermit
This object indicates if the result of the packet examination is 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets matching the access profile are
permitted to be forwarded by the swi…
Enumerationr/w
Enumerated Values:
1deny
2permit
3mirror
5set-drop-precedence
 .1.3.6.1.4.1.171.12.9.3.1.1.13
swACLEtherRulePort
Specifies that the access rule will only apply to port(s).
This object and swACLEtherRuleVID can not be set together.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.12.9.3.1.1.14
swACLEtherRuleRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.3.1.1.15
swACLEtherRuleOwner
The owner of the ACL rule entry. Only owners can modify this entry.
Enumeration
Enumerated Values:
1any
2acl
3ipbind
4other
5dhcp
6netbios
7ext-netbios
8ismvlan
9dhcp-relay
10pppoe
11arp-spoofing
12bpdu-tunnel
 .1.3.6.1.4.1.171.12.9.3.1.1.16
swACLEtherRuleRxRate
Specifies the rx rate, 0 denotes no_limit. The maximum value of this object depends on the device.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.3.1.1.17
swACLEtherRuleEnableReplaceTosPrecedence
Specifies if the switch will change priorities of packets that match the access profile
ToS precedence field or not.
Replace DSCP and replace ToS precedence can not both be supported.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.1.1.18
swACLEtherRuleRepTosPrecedence
Specifies a value to be written to the ToS precedence field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in the ToS precedence field of t…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.12.9.3.1.1.19
swACLEtherRuleVID
Specifies the VLAN-based ACL rule. There are two conditions:
1. this rule will apply to all the ports;
2. packets must belong to this VLAN.

This object and swACLEtherRulePort can not be set together.
When…
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.171.12.9.3.1.1.20
swACLEtherRuleMatchVID
Specifies that the access rule will apply only to packets with
this VLAN ID. It is applied to the specified ports configured by swACLEtherRulePort.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.171.12.9.3.1.1.21
swACLEtherRuleMaskVlan
Specifies the per rule mask for the VLAN field as defined in swACLEtherRuleVlan object.
The value of this object when not in use is the corresponding mask in the profile mask.
Once the value of this object is modified, …
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.3.1.1.22
swACLEtherRuleMaskSrcMacAddress
Specifies the per rule mask for the source MAC addres field as defined in swACLEtherRuleSrcMacAddress object.
The value of this object when not in use is the corresponding mask in the profile mask.
Once the …
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.3.1.1.23
swACLEtherRuleMaskDstMacAddress
Specifies the per rule mask for the destination MAC addres field as defined in swACLEtherRuleDstMacAddress object.
The value of this object when not in use is the corresponding mask in the profile mask.
Once…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.3.1.1.24

swACLIpRuleTable

table
.1.3.6.1.4.1.171.12.9.3.2 · 1 row entry · 34 columns
Open in standard view
swACLIpRuleEntry entry .1.3.6.1.4.1.171.12.9.3.2.1
Indexes
swACLIpRuleProfileID swACLIpRuleAccessID
Column Syntax OID
swACLIpRuleProfileID
The ID of the ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.3.2.1.1
swACLIpRuleAccessID
The ID of the ACL rule entry relates to swACLIPRuleProfileID.
Row creation set to 0 indicates automatic assignment of the Access ID
for the ports in the swACLIpRulePort to create Rule entries
for swACLIpRulePort accordi…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.9.3.2.1.2
swACLIpRuleVlan
Specifies that the access rule will only apply to packets with the VLAN ID indexed by this VLAN name.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.12.9.3.2.1.3
swACLIpRuleSrcIpaddress
Specifies an IP source address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.9.3.2.1.4
swACLIpRuleDstIpaddress
Specifies an IP destination address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.9.3.2.1.5
swACLIpRuleDscp
Specifies the value of DSCP. The value can be configured from 0 to 63.
A value of -1 indicates that this node is not actively used.
Integer32r/w
Constraints:
range: -1-63
 .1.3.6.1.4.1.171.12.9.3.2.1.6
swACLIpRuleProtocol
Specifies the IP protocol.
For some older chips, this object can not be set. When getting this object,
it always returns the type which has been configured in swACLIpEntry.

For some newer chips, this obje…
Enumerationr/w
Enumerated Values:
1none
2icmp
3igmp
4tcp
5udp
6protocolId
 .1.3.6.1.4.1.171.12.9.3.2.1.7
swACLIpRuleType
Specifies that the rule applies to the value of ICMP type traffic.
A value of -1 denotes that this object is not active.
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.171.12.9.3.2.1.8
swACLIpRuleCode
Specifies that the rule applies to the value of ICMP code traffic.
A value of -1 denotes that this object is not active.
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.171.12.9.3.2.1.9
swACLIpRuleSrcPort
Specifies that the rule applies to the range of the TCP/UDP source ports.
A value of -1 indicates that this node is not actively used.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.171.12.9.3.2.1.10
swACLIpRuleDstPort
Specifies the TCP/UDP destination port range.
A value of -1 indicates that this node is not actively used.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.171.12.9.3.2.1.11
swACLIpRuleFlagBits
A value which indicates the set of TCP flags that this
entity may potentially offer. The value is a sum of flag bits.
This sum initially takes the value zero. Then, for each flag, L
is added in the range 1 through 6, fo…
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.12.9.3.2.1.12
swACLIpRuleProtoID
Specifies that the rule applies to the value of IP protocol ID traffic.
A value of -1 indicates that this node is not actively used.
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.171.12.9.3.2.1.13
swACLIpRuleUserMask
Specifies that the rule applies to the IP protocol ID and the range of
options behind the IP header.
OctetStringr/w
Constraints:
range: 20-20
 .1.3.6.1.4.1.171.12.9.3.2.1.14
swACLIpRuleEnablePriority
Specifies that the access rule will apply only to packets with this
priority value.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.2.1.15
swACLIpRulePriority
Specifies the priority will change in packets while the swACLIpRuleEnablePriority
is enabled.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.12.9.3.2.1.16
swACLIpRuleReplacePriority
Specifies whether the packets that match the access profile will change the
802.1p priority tag field by the switch or not.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.2.1.17
swACLIpRuleEnableReplaceDscp
Specifies if the switch will change priorities of packets that match the access profile
DSCP field or not.
Replace DSCP and replace ToS precedence can not both be supported.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.2.1.18
swACLIpRuleRepDscp
Specifies a value to be written to the DSCP field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in the DSCP field of the packet.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.12.9.3.2.1.19
swACLIpRulePermit
This object indicates if the result of the packet examination is 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets matching the access profile are
permitted to be forwarded by the swi…
Enumerationr/w
Enumerated Values:
1deny
2permit
3mirror
5set-drop-precedence
 .1.3.6.1.4.1.171.12.9.3.2.1.20
swACLIpRulePort
Specifies that the access rule will only apply to port(s).
This object and swACLIpRuleVID can not be set together.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.12.9.3.2.1.21
swACLIpRuleRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.3.2.1.22
swACLIpRuleOwner
The owner of the ACL rule entry. Only owners can modify this entry.
Enumeration
Enumerated Values:
1any
2acl
3ipbind
4other
5dhcp
6netbios
7ext-netbios
8ismvlan
9dhcp-relay
10pppoe
11arp-spoofing
12bpdu-tunnel
 .1.3.6.1.4.1.171.12.9.3.2.1.23
swACLIpRuleRxRate
Specifies the rx-rate, 0 denotes no_limit. The maximum value of this object depends on the device.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.3.2.1.24
swACLIpRuleSrcMacAddress
Specifies that the access will only apply to packets with
this source MAC address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.3.2.1.25
swACLIpRuleEnableReplaceTosPrecedence
Specifies if the switch will change priorities of packets that match the access profile
ToS precedence field or not.
Replace DSCP and replace ToS precedence can not both be supported.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.2.1.26
swACLIpRuleRepTosPrecedence
Specifies a value to be written to the ToS precedence field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in the ToS precedence field of t…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.12.9.3.2.1.27
swACLIpRuleVID
Specifies the VLAN-based rule. There are two conditions:
1. this rule will apply to all the ports;
2. packets must belong to this VLAN.

This object and swACLIpRulePort can not be set together.
When you se…
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.171.12.9.3.2.1.28
swACLIpRuleMatchVID
Specifies that the access rule will apply only to packets with
this VLAN ID. It is applied to the specified ports configured by swACLIpRulePort.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.171.12.9.3.2.1.29
swACLIpRuleMaskVlan
Specifies the per rule mask for the VLAN as defined in swACLIpRuleVlan object.
The value of this object when not in use is the corresponding mask in the profile mask.
Once the value of this object is modified, the per …
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.3.2.1.30
swACLIpRuleMaskSrcIpaddress
Specifies the per rule mask for the source IP address as defined in swACLIpRuleSrcIpaddress object.
The value of this object when not in use is the corresponding mask in the profile mask.
Once the value of this object i…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.9.3.2.1.31
swACLIpRuleMaskDstIpaddress
Specifies the per rule mask for the destination IP address as defined in swACLIpRuleMaskDstIpaddress object.
The value of this object when not in use is the corresponding mask in the profile mask.
Once the value of this…
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.9.3.2.1.32
swACLIpRuleMaskSrcPort
Specifies the per rule mask for the L4 source port as defined in swACLIpRuleSrcPort object.
The value of this object when not in use is the corresponding mask in the profile mask.
Once the value of this object is modifi…
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.3.2.1.33
swACLIpRuleMaskDstPort
Specifies the per rule mask for the L4 destination port as defined in swACLIpRuleDstPort object.
The value of this object when not in use is the corresponding mask in the profile mask.
Once the value of this object is m…
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.3.2.1.34

swACLPktContRuleTable

table
.1.3.6.1.4.1.171.12.9.3.3 · 1 row entry · 20 columns
Open in standard view 
This table contains ACL rules regarding user-defined information.
swACLPktContRuleEntry entry .1.3.6.1.4.1.171.12.9.3.3.1
A list of information about the ACL rule of the user-defined part of each packet.
Indexes
swACLPktContRuleProfileID swACLPktContRuleAccessID
Column Syntax OID
swACLPktContRuleProfileID
The ID of the ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.3.3.1.1
swACLPktContRuleAccessID
The ID of the ACL rule entry in relation to the swACLPktContRuleProfileID.
When row creation is set to 0, an access ID is automatically created
for the ports in the swACLPktContRulePort to create rule entries
for swACLP…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.9.3.3.1.2
swACLPktContRuleOffset0to15
Specifies that the rule applies to the user-defined packet.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.3.3.1.3
swACLPktContRuleOffset16to31
Specifies that the rule applies to the user-defined packet.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.3.3.1.4
swACLPktContRuleOffset32to47
Specifies that the rule applies to the user-defined packet.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.3.3.1.5
swACLPktContRuleOffset48to63
Specifies that the rule applies to the user-defined packet.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.3.3.1.6
swACLPktContRuleOffset64to79
Specifies that the rule applies to the user-defined packet.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.3.3.1.7
swACLPktContRuleEnablePriority
Specifies that the access rule will apply only to packets with this
priority value.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.3.1.8
swACLPktContRulePriority
Specifies the priority will change for the packets while the swACLPktContRuleReplacePriority
is enabled .
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.12.9.3.3.1.9
swACLPktContRuleReplacePriority
Specifies if the switch will change priorities of packets that match the access profile
802.1p priority tag or not.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.3.1.10
swACLPktContRuleEnableReplaceDscp
Specifies if the switch will change priorities of packets that match the access profile
DSCP field or not.
Replace DSCP and replace ToS precedence can not both be supported.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.3.1.11
swACLPktContRuleRepDscp
Specifies a value to be written to the DSCP field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in the DSCP field of the packet.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.12.9.3.3.1.12
swACLPktContRulePermit
This object indicates if the result of the packet examination is 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets matching the access profile are
permitted to be forwarded by…
Enumerationr/w
Enumerated Values:
1deny
2permit
3mirror
4lease-renew
5set-drop-precedence
 .1.3.6.1.4.1.171.12.9.3.3.1.13
swACLPktContRulePort
Specifies that the access rule will only apply to port(s).
This object and swACLPktContRuleVID can not be set together.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.12.9.3.3.1.14
swACLPktContRuleRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.3.3.1.15
swACLPktContRuleOwner
The owner of the ACL rule entry. Only owners can modify this entry.
Enumeration
Enumerated Values:
1any
2acl
3ipbind
4other
5dhcp
6netbios
7ext-netbios
8ismvlan
9dhcp-relay
10pppoe
11arp-spoofing
12bpdu-tunnel
 .1.3.6.1.4.1.171.12.9.3.3.1.16
swACLPktContRuleRxRate
Specifies the rx-rate, 0 denotes no_limit. The maximum value of this object depends on the device.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.3.3.1.17
swACLPktContRuleEnableReplaceTosPrecedence
Specifies if the switch will change priorities of packets that match the access profile
ToS precedence field or not.
Replace DSCP and replace ToS precedence can not both be supported.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.3.1.18
swACLPktContRuleRepTosPrecedence
Specifies a value to be written to the ToS precedence field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in the ToS precedence field of t…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.12.9.3.3.1.19
swACLPktContRuleVID
Specifies this rule only applies to the specified VLAN. There are two conditions:
1.only the portlist that belongs to this VLAN will be included;
2.packets must belong to this VLAN.

This object and swACLP…
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.171.12.9.3.3.1.20

swACLIpv6RuleTable

table
.1.3.6.1.4.1.171.12.9.3.4 · 1 row entry · 26 columns
Open in standard view 
This table contains the IPv6 ACL rule information.
swACLIpv6RuleEntry entry .1.3.6.1.4.1.171.12.9.3.4.1
A list of information about ACL rules regarding the IPv6 part of each packet.
Indexes
swACLIpv6RuleProfileID swACLIpv6RuleAccessID
Column Syntax OID
swACLIpv6RuleProfileID
The ID of the ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.3.4.1.1
swACLIpv6RuleAccessID
The ID of the ACL rule entry relates to swACLIpv6RuleProfileID.
When row creation is set to 0, this indicates the access ID
will be assigned automatically for the ports in the swACLIpv6RulePort
to create rule entries fo…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.9.3.4.1.2
swACLIpv6RuleClass
Specifies that the rule applies to the IPv6 class field.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.12.9.3.4.1.3
swACLIpv6RuleFlowlabel
Specifies that the rule applies to the IPv6 flow label field.
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.171.12.9.3.4.1.4
swACLIpv6RuleSrcIpv6Addr
Specifies that the rule applies to the source IPv6 address.
This should be a 16 byte octet string.
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.12.9.3.4.1.5
swACLIpv6RuleDstIpv6Addr
Specifies that the rule applies to the destination IPv6 address.
This should be a 16 byte octet string.
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.12.9.3.4.1.6
swACLIpv6RuleEnablePriority
Specifies that the access rule will apply only to packets with
priority value.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.4.1.7
swACLIpv6RulePriority
Specifies the priority will change in packets while the swACLIpv6RuleReplacePriority
is enabled.
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.12.9.3.4.1.8
swACLIpv6RuleReplacePriority
Specifies if the switch will change priorities of packets that match the access profile
802.1p priority tag or not.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.4.1.9
swACLIpv6RulePermit
This object indicates if the result of the packet examination is 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets matching the access profile are
permitted to be forwarded by…
Enumerationr/w
Enumerated Values:
1deny
2permit
3mirror
5set-drop-precedence
 .1.3.6.1.4.1.171.12.9.3.4.1.10
swACLIpv6RulePort
Specifies that the access rule will apply only to port(s).
This object and swACLIpv6RuleVID can not be set together.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.12.9.3.4.1.11
swACLIpv6RuleRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.3.4.1.12
swACLIpv6RuleOwner
The owner of the ACL rule entry. Only owners can modify this entry.
Enumeration
Enumerated Values:
1any
2acl
3ipbind
4other
5dhcp
6netbios
7ext-netbios
8ismvlan
9dhcp-relay
10pppoe
11arp-spoofing
12bpdu-tunnel
 .1.3.6.1.4.1.171.12.9.3.4.1.13
swACLIpv6RuleRxRate
Specifies the rx-rate, 0 denotes no_limit. The maximum value of this object depends on the device.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.3.4.1.14
swACLIpv6RuleEnableReplaceDscp
Specifies if the switch will change priorities of packets that match the access profile
DSCP field or not.
Replace DSCP and replace ToS precedence can not both be supported.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.4.1.15
swACLIpv6RuleRepDscp
Specifies a value to be written to the DSCP field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in the DSCP field of the packet.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.12.9.3.4.1.16
swACLIpv6RuleEnableReplaceTosPrecedence
Specifies if the switch will change priorities of packets that match the access profile
ToS precedence field or not.
Replace DSCP and replace ToS precedence can not both be supported.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.4.1.17
swACLIpv6RuleRepTosPrecedence
Specifies a value to be written to the ToS precedence field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in the ToS precedence field of t…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.12.9.3.4.1.18
swACLIpv6RuleVID
Specifies this rule only applies to the specified VLAN. There are two conditions:
1.only the portlist that belongs to this VLAN will be included;
2.packets must belong to this VLAN.

This object and swACLI…
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.171.12.9.3.4.1.19
swACLIpv6RuleProtocol
Specifies the IPv6 protocol.
For some older chips, this object can not be set. When getting this object,
it always returns the type which has been configured in swACLIpv6Entry.

For some newer chips, this …
Enumerationr/w
Enumerated Values:
1none
2tcp
3udp
 .1.3.6.1.4.1.171.12.9.3.4.1.20
swACLIpv6RuleSrcPort
Specifies that the rule applies to the range of the TCP/UDP source ports.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.9.3.4.1.21
swACLIpv6RuleDstPort
Specifies the TCP/UDP destination ports range.
Integer32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.9.3.4.1.22
swACLIpv6RuleMaskSrcIpv6Addr
Specifies that the per rule mask of swACLIpv6RuleSrcIpv6Addr.
This should be a 16 byte octet string.
The value of this object when not in use is the corresponding mask in the profile mask.
Once the value of this object …
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.12.9.3.4.1.23
swACLIpv6RuleMaskDstIpv6Addr
Specifies that the rule applies to the destination IPv6 address.
This should be a 16 byte octet string.
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.12.9.3.4.1.24
swACLIpv6RuleMaskSrcPort
Specifies that the per rule mask of swACLIpv6RuleSrcPort.
The value of this object when not in use is the corresponding mask in the profile mask.
Once the value of this object is modified, the per rule mask will take ef…
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.3.4.1.25
swACLIpv6RuleMaskDstPort
Specifies the per rule mask of swACLIpv6RuleDstPort.
The value of this object when not in use is the corresponding mask in the profile mask.
Once the value of this object is modified, the per rule mask will take effect.…
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.3.4.1.26

swIBPACLEtherRuleTable

table obsolete
.1.3.6.1.4.1.171.12.9.3.5 · 1 row entry · 5 columns
Open in standard view 
This table contains IP-MAC-Binding Ethernet ACL Rule information.
swIBPACLEtherRuleEntry entry .1.3.6.1.4.1.171.12.9.3.5.1
A list of information about the ACL rule of the layer 2 part of each packet.
Indexes
swIBPACLEtherRuleProfileID swIBPACLEtherRuleAccessID
Column Syntax OID
swIBPACLEtherRuleProfileID obsolete
The ID of the ACL mask entry, unique in the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.3.5.1.1
swIBPACLEtherRuleAccessID obsolete
The ID of the ACL rule entry in relation to swACLEtherRuleProfileID.
When row creation is set to 0, this indicates automatically assigning an Access
for the ports in the swACLEtherRulePort to create rule entries for sw…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.9.3.5.1.2
swIBPACLEtherRuleEtherType obsolete
Specifies that the access rule will apply only to packets with this
802.1Q Ethernet type value in the packet header.
OctetString
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.3.5.1.3
swIBPACLEtherRulePermit obsolete
This object indicates if the result of the examination is 'permit' or 'deny'.
The default is 'permit' (1).
permit - Specifies that packets that match the access profile are
permitted to be forwarded by the swit…
Enumeration
Enumerated Values:
1deny
2permit
 .1.3.6.1.4.1.171.12.9.3.5.1.4
swIBPACLEtherRulePort obsolete
Specifies that the access rule will only apply to port(s).
PortList
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.12.9.3.5.1.5

swIBPACLIpRuleTable

table obsolete
.1.3.6.1.4.1.171.12.9.3.6 · 1 row entry · 6 columns
Open in standard view
swIBPACLIpRuleEntry entry .1.3.6.1.4.1.171.12.9.3.6.1
Indexes
swIBPACLIpRuleProfileID swIBPACLIpRuleAccessID
Column Syntax OID
swIBPACLIpRuleProfileID obsolete
The ID of the ACL mask entry, unique in the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.3.6.1.1
swIBPACLIpRuleAccessID obsolete
The ID of the ACL rule entry in relation to swACLIPRuleProfileID.
When the row creation is set to 0, this indicates assigning an access ID automatically
for the ports in the swACLIpRulePort to create rule entries for s…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.9.3.6.1.2
swIBPACLIpRuleSrcMacAddress obsolete
Specifies that the access rule will apply to only packets with
this source MAC address.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.3.6.1.3
swIBPACLIpRuleSrcIpaddress obsolete
Specifies an IP source address.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.9.3.6.1.4
swIBPACLIpRulePermit obsolete
This object indicates if the result of the examination is 'permit' or 'deny'; the default is 'permit' (1)
permit - Specifies that packets that match the access profile are
permitted to be forwarded by the switc…
Enumeration
Enumerated Values:
1deny
2permit
 .1.3.6.1.4.1.171.12.9.3.6.1.5
swIBPACLIpRulePort obsolete
Specifies that the access rule will only apply to port(s).
PortList
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.12.9.3.6.1.6

swACLPktContRuleOptionTable

table
.1.3.6.1.4.1.171.12.9.3.7 · 1 row entry · 23 columns
Open in standard view 
This table contains user-defined ACL information.
swACLPktContRuleOptionEntry entry .1.3.6.1.4.1.171.12.9.3.7.1
A list of information about the ACL rule regarding the user-defined part of each packet.
Indexes
swACLPktContRuleOptionProfileID swACLPktContRuleOptionAccessID
Column Syntax OID
swACLPktContRuleOptionProfileID
The ID of the ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.3.7.1.1
swACLPktContRuleOptionAccessID
The ID of the ACL rule entry in relation to the swACLPktContRuleProfileID.
When row creation is set to 0, access ID is automatically created
for the ports in the swACLPktContRulePort to create rule entries
for swACLPktC…
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.9.3.7.1.2
swACLPktContRuleOffsetChunk1OffsetValue
Displays the frame content offset of chunk1.
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.171.12.9.3.7.1.3
swACLPktContRuleOffsetChunk1Content
Specifies the frame content of chunk1.
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.171.12.9.3.7.1.4
swACLPktContRuleOffsetChunk2OffsetValue
Displays the frame content offset of chunk2.
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.171.12.9.3.7.1.5
swACLPktContRuleOffsetChunk2Content
Specifies the frame content of chunk2.
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.171.12.9.3.7.1.6
swACLPktContRuleOffsetChunk3OffsetValue
Displays the frame content offset of chunk3.
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.171.12.9.3.7.1.7
swACLPktContRuleOffsetChunk3Content
Specifies the frame content of chunk3.
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.171.12.9.3.7.1.8
swACLPktContRuleOffsetChunk4OffsetValue
Displays the frame content offset of chunk4.
Integer32
Constraints:
range: 0-31
 .1.3.6.1.4.1.171.12.9.3.7.1.9
swACLPktContRuleOffsetChunk4Content
Specifies the frame content of chunk4.
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.171.12.9.3.7.1.10
swACLPktContRuleOptionEnablePriority
Specifies that the access rule will only apply to packets with this
priority value.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.7.1.11
swACLPktContRuleOptionPriority
Specifies that the priority will change for the packets while the swACLPktContRuleReplacePriority
is enabled .
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.12.9.3.7.1.12
swACLPktContRuleOptionReplacePriority
Specifies if the switch will change priorities of packets that match the access profile
802.1p priority tag or not.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.7.1.13
swACLPktContRuleOptionEnableReplaceDscp
Specifies if the switch will change priorities of packets that match the access profile
DSCP field or not.
Replace DSCP and replace ToS precedence can not both be supported.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.7.1.14
swACLPktContRuleOptionRepDscp
Specifies a value to be written to the DSCP field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in the DSCP field of the packet.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.12.9.3.7.1.15
swACLPktContRuleOptionPermit
This object indicates if the result of the packet examination is 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets that match the access profile are
permitted to be forwarded by the s…
Enumerationr/w
Enumerated Values:
1deny
2permit
3mirror
 .1.3.6.1.4.1.171.12.9.3.7.1.16
swACLPktContRuleOptionPort
Specifies that the access rule will only apply to port(s).
This object and swACLPktContRuleOptionVID can not be set together.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.12.9.3.7.1.17
swACLPktContRuleOptionRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.3.7.1.18
swACLPktContRuleOptionOwner
The owner of the ACL rule entry. Only owners can modify this entry.
Enumeration
Enumerated Values:
1any
2acl
3ipbind
4other
5dhcp
6netbios
7ext-netbios
8ismvlan
9dhcp-relay
10pppoe
11arp-spoofing
12bpdu-tunnel
 .1.3.6.1.4.1.171.12.9.3.7.1.19
swACLPktContRuleOptionRxRate
Specifies the rx-rate, 0 denotes no_limit. The maximum value of this object depends on the device.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.3.7.1.20
swACLPktContRuleOptionEnableReplaceTosPrecedence
Specifies if the switch will change priorities of packets that match the access profile
ToS precedence field or not.
Replace DSCP and replace ToS precedence can not both be supported.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.7.1.21
swACLPktContRuleOptionRepTosPrecedence
Specifies a value to be written to the ToS precedence field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in the ToS precedence field of t…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.12.9.3.7.1.22
swACLPktContRuleOptionVID
Specifies this rule only applies to the specified VLAN. There are two conditions:
1.only the portlist that belongs to this VLAN will be included;
2.packets must belong to this VLAN.

This object and swACLP…
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.171.12.9.3.7.1.23

swACLCounterTable

table
.1.3.6.1.4.1.171.12.9.3.8 · 1 row entry · 7 columns
Open in standard view 
This table maintains counter information associated with a specific
rule in the ACL rule table. Please refer to the swACLEtherRuleTable,
swACLIpRuleTable, swACLIpv6RuleTable and swACLPktContRuleTable
for detailed ACL rule information.
swACLCounterEntry entry .1.3.6.1.4.1.171.12.9.3.8.1
The entry maintains counter information associated with the ACL
rule table.
Indexes
swACLCounterProfileID swACLCounterAccessID
Column Syntax OID
swACLCounterProfileID
The ID of the ACL mask entry, which is unique in the mask
list.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.3.8.1.1
swACLCounterAccessID
The ID of the ACL rule entry as related to the
swACLCounterProfileID.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.12.9.3.8.1.2
swACLCounterState
Specifies whether the counter feature will be enabled/disabled.
1. This is optional. The default is disable.
2. If the rule is not bound with flow_meter, then all packets that match will be counted.
If the rule is bound…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.8.1.3
swACLCounterTotalCounter
The number of matched packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.171.12.9.3.8.1.4
swACLCounterGreenCounter
The number of matched green packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.171.12.9.3.8.1.5
swACLCounterYellowCounter
The number of matched yellow packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.171.12.9.3.8.1.6
swACLCounterRedCounter
The number of matched red packets.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.171.12.9.3.8.1.7

swACLPktContRuleOption2Table

table
.1.3.6.1.4.1.171.12.9.3.10.1 · 1 row entry · 22 columns
Open in standard view 
This table contains user-defined ACL information for option 2 type
of packet contnet syntax.
          
	 	To qualify the data of a packet content field with respect to an offset, an entry in the
	 	swACLPktContRuleOption2OffsetsTable must be created first. 
          	 	
	 	On row creation, all entries in the corresponding profile defined in the
	 	swACLPktContRuleOption2OffsetsTable will be associated to the ACL rule.
swACLPktContRuleOption2Entry entry .1.3.6.1.4.1.171.12.9.3.10.1.1
A list of information about the ACL rule regarding the user-defined part of each packet.
Indexes
swACLPktContRuleOption2ProfileID swACLPktContRuleOption2AccessID
Column Syntax OID
swACLPktContRuleOption2ProfileID
The ID of the ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.3.10.1.1.1
swACLPktContRuleOption2AccessID
The ID of the ACL rule entry in relation to the swACLPktContRuleOption2ProfileID.
When row creation is set to 0, access ID is automatically assigned.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.9.3.10.1.1.2
swACLPktContRuleOption2SrcMac
Specifies that the access rule will apply to only packets with
this source MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.3.10.1.1.3
swACLPktContRuleOption2DstMac
Specifies that the access rule will apply to only packets with
this destination MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.3.10.1.1.4
swACLPktContRuleOption2CTag
Specifies the frame content of the customer VLAN tag, valid values are only from 0x0000 to 0xFFFF.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.3.10.1.1.5
swACLPktContRuleOption2STag
Specifies the frame content of the service VLAN tag, valid values are only from 0x0000 to 0xFFFF.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.3.10.1.1.6
swACLPktContRuleOption2EnablePriority
Specifies that the access rule will only apply to packets with this
priority value.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.10.1.1.7
swACLPktContRuleOption2Priority
Specifies that the priority will change for the packets while the swACLPktContRuleOption2ReplacePriority
is enabled .
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.12.9.3.10.1.1.8
swACLPktContRuleOption2ReplacePriority
Specifies if the switch will change priorities of packets that match the access profile
802.1p priority tag or not.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.10.1.1.9
swACLPktContRuleOption2EnableReplaceDscp
Specifies if the switch will change priorities of packets that match the access profile
DSCP field or not.
Replace DSCP and replace ToS precedence can not both be supported.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.10.1.1.10
swACLPktContRuleOption2RepDscp
Specifies a value to be written to the DSCP field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in the DSCP field of the packet.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.12.9.3.10.1.1.11
swACLPktContRuleOption2Permit
This object indicates if the result of the packet examination is 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets that match the access profile are
permitted to be forwarded by the s…
Enumerationr/w
Enumerated Values:
1deny
2permit
3mirror
 .1.3.6.1.4.1.171.12.9.3.10.1.1.12
swACLPktContRuleOption2Port
Specifies that the access rule will only apply to port(s).
This object and swACLPktContRuleOption2VID can not be set together.
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.12.9.3.10.1.1.13
swACLPktContRuleOption2Owner
The owner of the ACL rule entry. Only owners can modify this entry.
Enumeration
Enumerated Values:
1any
2acl
3ipbind
4other
5dhcp
6netbios
7ext-netbios
8ismvlan
9dhcp-relay
10pppoe
11arp-spoofing
12bpdu-tunnel
 .1.3.6.1.4.1.171.12.9.3.10.1.1.17
swACLPktContRuleOption2EnableReplaceTosPrecedence
Specifies if the switch will change priorities of packets that match the access profile
ToS precedence field or not.
Replace DSCP and replace ToS precedence can not both be supported.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.3.10.1.1.18
swACLPktContRuleOption2RepTosPrecedence
Specifies a value to be written to the ToS precedence field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in the ToS precedence field of t…
Integer32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.171.12.9.3.10.1.1.19
swACLPktContRuleOption2VID
Specifies this rule only applies to the specified VLAN. There are two conditions:
1.only the portlist that belongs to this VLAN will be included;
2.packets must belong to this VLAN.

This object and swACLP…
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.171.12.9.3.10.1.1.20
swACLPktContRuleOption2RowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.3.10.1.1.21
swACLPktContRuleOption2MaskSrcMac
Specifies the per rule mask of source MAC address field as defined in swACLPktContRuleOption2SrcMac object
The value of this object when not in use is the corresponding mask in the profile mask.
Once the value of this o…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.3.10.1.1.22
swACLPktContRuleOption2MaskDstMac
Specifies the per rule mask of source MAC address field as defined in swACLPktContRuleOption2DstMac object
The value of this object when not in use is the corresponding mask in the profile mask.
Once the value of this o…
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.3.10.1.1.23
swACLPktContRuleOption2MaskCTag
Specifies the per rule mask of the customer VLAN tag field as defined in swACLPktContRuleOption2CTag object
The value of this object when not in use is the corresponding mask in the profile mask.
Once the value of this …
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.3.10.1.1.24
swACLPktContRuleOption2MaskSTag
Specifies the per rule mask of the service VLAN tag field as defined in swACLPktContRuleOption2STag object
The value of this object when not in use is the corresponding mask in the profile mask.
Once the value of this o…
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.3.10.1.1.25

swACLPktContRuleOption2OffsetsTable

table
.1.3.6.1.4.1.171.12.9.3.10.2 · 1 row entry · 6 columns
Open in standard view 
This table contains the ACL rules for the individual packet 
content offset user-defined option 2 information. 
          
		Entries created in this table will not set into the TCAM until a 
		valid entry in the swACLPktContMaskOption2Table is created.
swACLPktContRuleOption2OffsetsEntry entry .1.3.6.1.4.1.171.12.9.3.10.2.1
A list of information about the ACL rule regarding the user-defined part of each packet.
Indexes
swACLPktContRuleOption2OffsetsProfileID swACLPktContRuleOption2OffsetsAccessID swACLPktContRuleOption2OffsetsNum
Column Syntax OID
swACLPktContRuleOption2OffsetsProfileID
The ACL profile id to which this packet content field entry will be associated.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.3.10.2.1.1
swACLPktContRuleOption2OffsetsAccessID
The ACL access id to which this packet content field entry will be associated.
Integer32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.171.12.9.3.10.2.1.2
swACLPktContRuleOption2OffsetsNum
The sequence number of the packet content field to qualify the packet content.
Integer32
Constraints:
range: 1-11
 .1.3.6.1.4.1.171.12.9.3.10.2.1.3
swACLPktContRuleOption2OffsetsData
The data of the packet content field.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.3.10.2.1.4
swACLPktContRuleOption2OffsetsRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.3.10.2.1.5
swACLPktContRuleOption2OffsetsMask
Specifies the per rule mask of the frame content of each packet content offset field.
The value of this object when not in use is the corresponding mask in the profile mask.
Once the value of this object is modified, th…
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.3.10.2.1.6

swCpuAclEthernetTable

table
.1.3.6.1.4.1.171.12.9.4.1 · 1 row entry · 8 columns
Open in standard view 
This table contains software ACL mask Ethernet information.
Access profiles will be created on the switch to define which
part of each incoming frame's layer 2 header will be examined by
the switch. Masks entered will be combined with the values
the switch finds in the specified frame header fields.
swCpuAclEthernetEntry entry .1.3.6.1.4.1.171.12.9.4.1.1
A list of information about Ethernet ACL masks.
Indexes
swCpuAclEthernetProfileID
Column Syntax OID
swCpuAclEthernetProfileID
The ID of the software ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.4.1.1.1
swCpuAclEthernetUsevlan
Specifies that the switch will examine the VLAN part of each packet header.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.4.1.1.2
swCpuAclEthernetMacAddrMaskState
This object indicates the status of the MAC address mask.

other (1) - Neither source MAC addresses nor destination MAC addresses are
masked.
dst-mac-addr (2) - Destination MAC addresses within receive…
Enumerationr/w
Enumerated Values:
1other
2dst-mac-addr
3src-mac-addr
4dst-src-mac-addr
 .1.3.6.1.4.1.171.12.9.4.1.1.3
swCpuAclEthernetSrcMacAddrMask
This object specifies the MAC address mask for the source MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.4.1.1.4
swCpuAclEthernetDstMacAddrMask
This object specifies the MAC address mask for the destination MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.4.1.1.5
swCpuAclEthernetUse8021p
Specifies if the switch will examine the 802.1p priority value in the frame's header
or not.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.4.1.1.6
swCpuAclEthernetUseEthernetType
Specifies if the switch will examine the Ethernet type value in each frame's header
or not.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.4.1.1.7
swCpuAclEthernetRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.4.1.1.8

swCpuAclIpTable

table
.1.3.6.1.4.1.171.12.9.4.2 · 1 row entry · 19 columns
Open in standard view 
This table contains software ACL mask IP information.
Access profiles will be created on the switch to define which
parts of each incoming frame's IP layer 2 header will be examined
by the switch. Masks entered will be combined with the
values the switch finds in the specified frame header fields.
swCpuAclIpEntry entry .1.3.6.1.4.1.171.12.9.4.2.1
A list of information about the software ACL of the IP Layer.
Indexes
swCpuAclIpProfileID
Column Syntax OID
swCpuAclIpProfileID
The ID of the software ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.4.2.1.1
swCpuAclIpUsevlan
This object indicates if the IP layer VLAN part is examined or not.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.4.2.1.2
swCpuAclIpIpAddrMaskState
This object indicates the status of IP address mask.

other (1) - Neither source IP addresses nor destination IP address are
masked.
dst-ip-addr (2) - Destination IP addresses within received frames ar…
Enumerationr/w
Enumerated Values:
1other
2dst-ip-addr
3src-ip-addr
4dst-src-ip-addr
 .1.3.6.1.4.1.171.12.9.4.2.1.3
swCpuAclIpSrcIpAddrMask
This object specifies the IP address mask for the source IP address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.9.4.2.1.4
swCpuAclIpDstIpAddrMask
This object specifies the IP address mask for the destination IP address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.9.4.2.1.5
swCpuAclIpUseDSCP
This object indicates if the DSCP protocol in the packet header is to be examined or not.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.4.2.1.6
swCpuAclIpUseProtoType
This object indicates which protocol will be examined.
Enumerationr/w
Enumerated Values:
1none
2icmp
3igmp
4tcp
5udp
6protocolId
 .1.3.6.1.4.1.171.12.9.4.2.1.7
swCpuAclIpIcmpOption
This object indicates which fields are identified for ICMP.
none (1)- Both fields are null.
type (2)- Type field identified.
code (3)- Code field identified.
type-code (4)- Both ICMP fields identified.
Enumerationr/w
Enumerated Values:
1none
2type
3code
4type-code
 .1.3.6.1.4.1.171.12.9.4.2.1.8
swCpuAclIpIgmpOption
This object indicates if the IGMP options field is identified or not.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.12.9.4.2.1.9
swCpuAclIpTcpOption
This object indicates the status of filtered addresses of TCP.

other (1) - Neither source port nor destination port are
masked.
dst-addr (2) - Packets will be filtered if this destination port is
identifi…
Enumerationr/w
Enumerated Values:
1other
2dst-addr
3src-addr
4dst-src-addr
 .1.3.6.1.4.1.171.12.9.4.2.1.10
swCpuAclIpUdpOption
This object indicates the status of filtered addresses of UDP.

other (1) - Neither source port nor destination port are
masked.
dst-addr (2) - Packets will be filtered if this destination port
is …
Enumerationr/w
Enumerated Values:
1other
2dst-addr
3src-addr
4dst-src-addr
 .1.3.6.1.4.1.171.12.9.4.2.1.11
swCpuAclIpTCPorUDPSrcPortMask
Specifies a TCP port mask for the source port if swCpuAclIpUseProtoType is TCP.
Specifies a UDP port mask for the source port if swCpuAclIpUseProtoType is UDP.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.4.2.1.12
swCpuAclIpTCPorUDPDstPortMask
Specifies a TCP port mask for the destination port if swCpuAclIpUseProtoType is TCP.
Specifies a UDP port mask for the destination port if swCpuAclIpUseProtoType is UDP.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.4.2.1.13
swCpuAclIpTCPFlagBit
Specifies a TCP connection flag mask.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.12.9.4.2.1.14
swCpuAclIpTCPFlagBitMask
A value which indicates the set of TCP flags that this
entity may potentially offer. The value is a sum of flag bits.
This sum initially takes the value zero. Then, for each flag, L
is added in the range 1 through 6, fo…
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.12.9.4.2.1.15
swCpuAclIpProtoIDOption
Specifies if the switch will examine each frame's Protocol ID field or not.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.12.9.4.2.1.16
swCpuAclIpProtoID Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.12.9.4.2.1.17
swCpuAclIpProtoIDMask
Specifies that the rule applies to the IP protocol ID and the mask options
behind the IP header.
OctetStringr/w
Constraints:
range: 20-20
 .1.3.6.1.4.1.171.12.9.4.2.1.18
swCpuAclIpRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.4.2.1.19

swCpuAclPktContMaskTable

table
.1.3.6.1.4.1.171.12.9.4.3 · 1 row entry · 7 columns
Open in standard view 
This table contains user-defined software ACL information.
Access profiles will be created on the switch to define which
part of each incoming frame's user-defined part of the packet header
will be examined by the switch. Masks entered will be combined
 with the values the switch finds in the specified frame header fields.
swCpuAclPktContMaskEntry entry .1.3.6.1.4.1.171.12.9.4.3.1
A list of information about user-defined software ACLs.
Indexes
swCpuAclPktContMaskProfileID
Column Syntax OID
swCpuAclPktContMaskProfileID
The ID of the software ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.4.3.1.1
swCpuAclPktContMaskOffset0to15
Specifies that the rule applies to the packet content (Offset0to15) and
the mask options.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.4.3.1.2
swCpuAclPktContMaskOffset16to31
Specifies that the rule applies to the packet content (Offset16to31) and
the mask options.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.4.3.1.3
swCpuAclPktContMaskOffset32to47
Specifies that the rule applies to the packet content (Offset32to47) and
the mask options.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.4.3.1.4
swCpuAclPktContMaskOffset48to63
Specifies that the rule applies to the packet content (Offset48to63) and
the mask options.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.4.3.1.5
swCpuAclPktContMaskOffset64to79
Specifies that the rule applies to the packet content (Offset64to79) and
the mask options.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.4.3.1.6
swCpuAclPktContMaskRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.4.3.1.7

swCpuAclIpv6MaskTable

table
.1.3.6.1.4.1.171.12.9.4.4 · 1 row entry · 7 columns
Open in standard view 
This table contains IPv6 software ACL mask information.
An access profile will be created on the switch to define which
part of each incoming frame's IPv6 part of the packet header
will be examined by switch. Masks entered will be combined
 with the values the switch finds in the specified frame header fields.
swCpuAclIpv6MaskEntry entry .1.3.6.1.4.1.171.12.9.4.4.1
A list of information about user-defined software ACLs.
Indexes
swCpuAclIpv6MaskProfileID
Column Syntax OID
swCpuAclIpv6MaskProfileID
The ID of the software ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.4.4.1.1
swCpuAclIpv6MaskClass
Specifies that the rule applies to the IPv6 class field and the mask options.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.12.9.4.4.1.2
swCpuAclIpv6MaskFlowlabel
Specifies that the rule applies to the IPv6 flowlabel field and the mask options.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.171.12.9.4.4.1.3
swCpuAclIpv6IpAddrMaskState
This object indicates the status of IPv6 address mask.

other (1) - Neither source IPv6 address nor destination IPv6 address are
masked.
dst-ipv6-addr (2) - Packets will be filtered if this destinatio…
Enumerationr/w
Enumerated Values:
1other
2dst-ipv6-addr
3src-ipv6-addr
4dst-src-ipv6-addr
 .1.3.6.1.4.1.171.12.9.4.4.1.4
swCpuAclIpv6MaskSrcIpv6Mask
Specifies that the rule applies to the source IPv6 address and the mask options.
This should be a 16 byte octet string.
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.12.9.4.4.1.5
swCpuAclIpv6MaskDstIpv6Mask
Specifies that the rule applies to the destination IPv6 address and the mask options.
This should be a 16 byte octet string.
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.12.9.4.4.1.6
swCpuAclIpv6MaskRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.4.4.1.7

swCpuAclEtherRuleTable

table
.1.3.6.1.4.1.171.12.9.5.1 · 1 row entry · 11 columns
Open in standard view 
This table contains Ethernet software ACL rule information.
swCpuAclEtherRuleEntry entry .1.3.6.1.4.1.171.12.9.5.1.1
A list of information about the software ACL rule of the layer 2 part of each packet.
Indexes
swCpuAclEtherRuleProfileID swCpuAclEtherRuleAccessID
Column Syntax OID
swCpuAclEtherRuleProfileID
The ID of the software ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.5.1.1.1
swCpuAclEtherRuleAccessID
The ID of the software ACL rule entry as it relates to swCpuAclEtherRuleProfileID.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.12.9.5.1.1.2
swCpuAclEtherRuleVlan
Specifies that the access rule will only apply to packets with the VLAN ID indexed by this VLAN name.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.12.9.5.1.1.3
swCpuAclEtherRuleSrcMacAddress
Specifies that the access rule will only apply to the packets with
this source MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.5.1.1.4
swCpuAclEtherRuleDstMacAddress
Specifies that the access rule will only apply to the packets with this destination MAC address.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.171.12.9.5.1.1.5
swCpuAclEtherRule8021P
Specifies that the access rule will only apply to packets with
this 802.1p priority value. A value of -1 indicates that this node is not actively used.
Integer32r/w
Constraints:
range: -1-7
 .1.3.6.1.4.1.171.12.9.5.1.1.6
swCpuAclEtherRuleEtherType
Specifies that the access rule will only apply to packets with this
802.1Q Ethernet type value in the packet header.
OctetStringr/w
Constraints:
range: 2-2
 .1.3.6.1.4.1.171.12.9.5.1.1.7
swCpuAclEtherRulePermit
This object indicates if the result of the packet examination is to 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets that match the access profile are
permitted to be forwarded by th…
Enumerationr/w
Enumerated Values:
1deny
2permit
 .1.3.6.1.4.1.171.12.9.5.1.1.8
swCpuAclEtherRuleRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.5.1.1.9
swCpuAclEtherRulePort
Specifies that the access rule will only apply to port(s).
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.12.9.5.1.1.10
swCpuAclEtherRuleMatchVID
Specifies that the access rule will apply only to packets with
this VLAN ID.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.171.12.9.5.1.1.11

swCpuAclIpRuleTable

table
.1.3.6.1.4.1.171.12.9.5.2 · 1 row entry · 18 columns
Open in standard view 
This table contains IPv4 software ACL rule information.
swCpuAclIpRuleEntry entry .1.3.6.1.4.1.171.12.9.5.2.1
A list of information about this software ACL rule.
Indexes
swCpuAclIpRuleProfileID swCpuAclIpRuleAccessID
Column Syntax OID
swCpuAclIpRuleProfileID
The ID of the software ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.5.2.1.1
swCpuAclIpRuleAccessID
The ID of the software ACL for the IPv4 rule entry.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.12.9.5.2.1.2
swCpuAclIpRuleVlan
Specifies that the access rule will apply only to packets with the VLAN ID indexed by this VLAN name.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.171.12.9.5.2.1.3
swCpuAclIpRuleSrcIpaddress
Specifies an IP source address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.9.5.2.1.4
swCpuAclIpRuleDstIpaddress
Specifies an IP destination address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.171.12.9.5.2.1.5
swCpuAclIpRuleDscp
Specifies the value of DSCP. The value can be configured from 0 to 63.
A value of -1 indicates that this node is not actively used.
Integer32r/w
Constraints:
range: -1-63
 .1.3.6.1.4.1.171.12.9.5.2.1.6
swCpuAclIpRuleProtocol
Specifies the IP protocol which has been configured in swCpuAclIpEntry.
Enumeration
Enumerated Values:
1none
2icmp
3igmp
4tcp
5udp
6protocolId
 .1.3.6.1.4.1.171.12.9.5.2.1.7
swCpuAclIpRuleType
Specifies the rule applies to the value of ICMP type traffic.
A value of -1 indicates that this node is not actively used.
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.171.12.9.5.2.1.8
swCpuAclIpRuleCode
Specifies the rule applies to the value of ICMP code traffic.
A value of -1 indicates that this node is not actively used.
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.171.12.9.5.2.1.9
swCpuAclIpRuleSrcPort
Specifies the rule applies to the range of TCP/UDP source ports.
A value of -1 indicates that this node is not actively used.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.171.12.9.5.2.1.10
swCpuAclIpRuleDstPort
Specifies the range of TCP/UDP destination ports.
A value of -1 indicates that this node is not actively used.
Integer32r/w
Constraints:
range: -1-65535
 .1.3.6.1.4.1.171.12.9.5.2.1.11
swCpuAclIpRuleFlagBits
A value which indicates the set of TCP flags that this
entity may potentially offer. The value is a sum of flag bits.
This sum initially takes the value zero. Then, for each flag, L
is added in the range 1 through 6, fo…
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.12.9.5.2.1.12
swCpuAclIpRuleProtoID
Specifies the rule applies to the value of IP protocol ID traffic.
A value of -1 indicates that this node is not actively used.
Integer32r/w
Constraints:
range: -1-255
 .1.3.6.1.4.1.171.12.9.5.2.1.13
swCpuAclIpRuleUserMask
Specifies that the rule applies to the IP protocol ID and the range of
options behind the IP header.
OctetStringr/w
Constraints:
range: 20-20
 .1.3.6.1.4.1.171.12.9.5.2.1.14
swCpuAclIpRulePermit
This object indicates if the result of the packet examination is to 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets that match the access profile are
permitted to be forwarded by th…
Enumerationr/w
Enumerated Values:
1deny
2permit
 .1.3.6.1.4.1.171.12.9.5.2.1.15
swCpuAclIpRuleRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.5.2.1.16
swCpuAclIpRulePort
Specifies that the access rule will only apply to port(s).
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.12.9.5.2.1.17
swCpuAclIpRuleMatchVID
Specifies that the access rule will apply only to packets with
this VLAN ID.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.171.12.9.5.2.1.18

swCpuAclPktContRuleTable

table
.1.3.6.1.4.1.171.12.9.5.3 · 1 row entry · 10 columns
Open in standard view 
This table contains user-defined software ACL rule information.
swCpuAclPktContRuleEntry entry .1.3.6.1.4.1.171.12.9.5.3.1
A list of information about the software ACL rule of the user-defined part of each packet.
Indexes
swCpuAclPktContRuleProfileID swCpuAclPktContRuleAccessID
Column Syntax OID
swCpuAclPktContRuleProfileID
The ID of the software ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.5.3.1.1
swCpuAclPktContRuleAccessID
The ID of the software ACL rule entry related to swCpuAclPktContRuleProfileID.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.12.9.5.3.1.2
swCpuAclPktContRuleOffset0to15
Specifies that the rule applies to the user-defined packet.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.5.3.1.3
swCpuAclPktContRuleOffset16to31
Specifies that the rule applies to the user-defined packet.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.5.3.1.4
swCpuAclPktContRuleOffset32to47
Specifies that the rule applies to the user-defined packet.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.5.3.1.5
swCpuAclPktContRuleOffset48to63
Specifies that the rule applies to the user-defined packet.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.5.3.1.6
swCpuAclPktContRuleOffset64to79
Specifies that the rule applies to the user-defined packet.
OctetStringr/w
Constraints:
range: 16-16
 .1.3.6.1.4.1.171.12.9.5.3.1.7
swCpuAclPktContRulePermit
This object indicates if the result of the packet examination is to 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets that match the access profile are
permitted to be forwarded by th…
Enumerationr/w
Enumerated Values:
1deny
2permit
 .1.3.6.1.4.1.171.12.9.5.3.1.8
swCpuAclPktContRuleRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.5.3.1.9
swCpuAclPktContRulePort
Specifies that the access rule will only apply to port(s).
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.12.9.5.3.1.10

swCpuAclIpv6RuleTable

table
.1.3.6.1.4.1.171.12.9.5.4 · 1 row entry · 9 columns
Open in standard view 
This table contains user-defined ACL rule information.
swCpuAclIpv6RuleEntry entry .1.3.6.1.4.1.171.12.9.5.4.1
A list of information about the ACL rule of the user-defined part of each packet.
Indexes
swCpuAclIpv6RuleProfileID swCpuAclIpv6RuleAccessID
Column Syntax OID
swCpuAclIpv6RuleProfileID
The ID of the ACL mask entry. This is unique in the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.5.4.1.1
swCpuAclIpv6RuleAccessID
The ID of the ACL rule entry in relation to swCpuAclIpv6RuleProfileID.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.12.9.5.4.1.2
swCpuAclIpv6RuleClass
Specifies that the rule applies to the IPv6 class field.
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.171.12.9.5.4.1.3
swCpuAclIpv6RuleFlowlabel
Specifies that the rule applies to the IPv6 flowlabel field.
OctetStringr/w
Constraints:
range: 4-4
 .1.3.6.1.4.1.171.12.9.5.4.1.4
swCpuAclIpv6RuleSrcIpv6Addr
Specifies that the rule applies to the source IPv6 address.
This should be a 16 byte octet string.
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.12.9.5.4.1.5
swCpuAclIpv6RuleDstIpv6Addr
Specifies that the rule applies to the destination IPv6 address.
This should be a 16 byte octet string.
Ipv6Addressr/w
Textual Convention: Ipv6Address OctetString
Type Constraints:
range: 16
 .1.3.6.1.4.1.171.12.9.5.4.1.6
swCpuAclIpv6RulePermit
This object indicates if the result of the examination is to 'permit' or 'deny'.
The default is 'permit' (1).
permit - Specifies that packets that match the access profile are
permitted to be forwarded by the s…
Enumerationr/w
Enumerated Values:
1deny
2permit
 .1.3.6.1.4.1.171.12.9.5.4.1.7
swCpuAclIpv6RuleRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.5.4.1.8
swCpuAclIpv6RulePort
Specifies that the access rule will apply only to port(s).
PortListr/w
Textual Convention: PortList OctetString
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.171.12.9.5.4.1.9

swAclMeterTable

table
.1.3.6.1.4.1.171.12.9.6.1 · 1 row entry · 35 columns
Open in standard view 
This table is used to configure the flow-based metering function.
The access rule must first be created before the parameters of this
function can be applied. Users may set the preferred bandwidth for
this rule, in Kbps; once the bandwidth has been exceeded, overflow
packets will be either dropped or set for a drop precedence,
depending on user configuration.
swAclMeterEntry entry .1.3.6.1.4.1.171.12.9.6.1.1
This entry displays parameters and configurations set for the flow
metering function.
Indexes
swAclMeterProfileID swAclMeterAccessID
Column Syntax OID
swAclMeterProfileID
The ID of the ACL mask entry is unique in the mask list. The maximum value of this object depends on the device.
Integer32
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.6.1.1.1
swAclMeterAccessID
The ID of the ACL rule entry as related to the swAclMeterProfileID.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.171.12.9.6.1.1.2
swAclMeterRate
Specifies the committed bandwidth in Kbps for the flow.
NOTE:
1. Specifying 0 will disable this flow meter setting.
2. Users must set the swAclMeterActionForRateExceed object to activate this entry.
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.6.1.1.3
swAclMeterActionForRateExceed
Specifies the action to take for those packets exceeding the committed rate.
NOTE:
Users must also set the swAclMeterRate to activate this entry.
Enumerationr/w
Enumerated Values:
1other
2drop-packet
3set-drop-precedence
4remark-dscp
 .1.3.6.1.4.1.171.12.9.6.1.1.4
swAclMeterRemarkDscp
Mark the packet with a specified DSCP.
It can be set when swAclMeterActionForRateExceed sets remark-dscp (3).
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.12.9.6.1.1.5
swAclMeterBurstSize
This specifies the burst size for the single rate two color mode.
The unit is Kbytes. That is to say, 1 means 1kbytes.
The set value range is 0..n, the value n is determined by project,
the value of 0 means to delete th…
Integer32r/w
Textual Convention: COPS-PR-SPPIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.171.12.9.6.1.1.6
swAclMeterMode
tr-tcm: two rate three color mode;
sr-tcm: single rate three color mode.
Enumerationr/w
Enumerated Values:
1other
2tr-tcm
3sr-tcm
 .1.3.6.1.4.1.171.12.9.6.1.1.7
swAclMeterTrtcmCir
Specifies the 'committed information rate' of 'two rate three color mode'.
The unit is Kbps.
Integer32r/w
Constraints:
range: 1-156249
 .1.3.6.1.4.1.171.12.9.6.1.1.8
swAclMeterTrtcmCbs
Specifies the 'committed burst size' of 'two rate three color mode'.
1. The unit is Kbytes. That is to say, 1 means 1Kbytes.
2. This parameter is an optional parameter. The default value is 4*1024.
3. The max set va…
Integer32r/w
Constraints:
range: 1-16384
 .1.3.6.1.4.1.171.12.9.6.1.1.9
swAclMeterTrtcmPir
Specifies the 'Peak Information Rate' of 'two rate three color mode'.
The unit is Kbps.
Integer32r/w
Constraints:
range: 1-156249
 .1.3.6.1.4.1.171.12.9.6.1.1.10
swAclMeterTrtcmPbs
Specifies the 'peak burst size' of 'two rate three color mode'.
1. The unit is Kbytes. That is to say, 1 means 1kbytes.
2. This parameter is an optional parameter. The default value is 4*1024.
3. The max set value i…
Integer32r/w
Constraints:
range: 1-16384
 .1.3.6.1.4.1.171.12.9.6.1.1.11
swAclMeterTrtcmColorMode
Specifies the meter mode.
The default is color-blind mode. The final color of the packet is determined
by the initial color of the packet and the metering result.
Enumerationr/w
Enumerated Values:
1color-blind
2color-aware
 .1.3.6.1.4.1.171.12.9.6.1.1.12
swAclMeterTrtcmConformState
Specifies the action state when packet is in 'green color'.
permit: permit the packet.
replace-dscp: change the DSCP value of packet.
Enumerationr/w
Enumerated Values:
1other
2permit
3replace-dscp
 .1.3.6.1.4.1.171.12.9.6.1.1.13
swAclMeterTrtcmConformReplaceDscp
Specifies the DSCP value of the packet when the packet is in 'green color'.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.12.9.6.1.1.14
swAclMeterTrtcmConformCounterState
Specifies the counter state when the packet is in 'green color'.
1. This is optional. The default is 'disable'.
2. The resource may be limited so that the counter can not be turned on. The limitation is project …
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.6.1.1.15
swAclMeterTrtcmExceedState
Specifies the action state when packet is in 'yellow color'.
permit: permit the packet.
replace-dscp: change the DSCP value of the packet.
drop: drop the packet.
Enumerationr/w
Enumerated Values:
1other
2permit
3replace-dscp
4drop
 .1.3.6.1.4.1.171.12.9.6.1.1.16
swAclMeterTrtcmExceedReplaceDscp
Specifies the DSCP value of packet when packet is in 'yellow color'.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.12.9.6.1.1.17
swAclMeterTrtcmExceedCounterState
Specifies the counter state when packet is in 'yellow color'.
1. This is optional. The default is 'disable'.
2. The resource may be limited so that the counter can not be turned on. The limitation is project dep…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.6.1.1.18
swAclMeterTrtcmViolateState
Specifies the action state when packet is in 'red color'.
permit: permit the packet.
replace-dscp: change the DSCP value of packet.
drop: drop the packet.
Enumerationr/w
Enumerated Values:
1other
2permit
3replace-dscp
4drop
 .1.3.6.1.4.1.171.12.9.6.1.1.19
swAclMeterTrtcmViolateReplaceDscp
Specifies the DSCP value of the packet when packet is in 'red color'.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.12.9.6.1.1.20
swAclMeterTrtcmViolateCounterState
Specifies the counter state when packet is in 'red color'.
1. This is optional. The default is 'disable'.
2. The resource may be limited so that the counter can not be turned on. The limitation is project depend…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.6.1.1.21
swAclMeterSrtcmCir
Specifies the 'committed information rate' of 'single rate three color mode'.
The unit is Kbps.
Integer32r/w
Constraints:
range: 1-156249
 .1.3.6.1.4.1.171.12.9.6.1.1.22
swAclMeterSrtcmCbs
Specifies the 'committed burst size' of 'single rate three color mode'.
1. The unit is Kbytes. That is to say, 1 means 1Kbytes.
2. The max set value is 16*1024.
Integer32r/w
Constraints:
range: 1-16384
 .1.3.6.1.4.1.171.12.9.6.1.1.23
swAclMeterSrtcmEbs
Specifies the 'Excess burst size' of 'single rate three color mode'.
1. The unit is Kbytes. That is to say, 1 means 1kbytes.
2. The max set value is 16*1024.
Integer32r/w
Constraints:
range: 1-16384
 .1.3.6.1.4.1.171.12.9.6.1.1.24
swAclMeterSrtcmColorMode
Specifies the meter mode.
The default is color-blind mode. The final color of packet is determined
by the initial color of the packet and the metering result.
Enumerationr/w
Enumerated Values:
1color-blind
2color-aware
 .1.3.6.1.4.1.171.12.9.6.1.1.25
swAclMeterSrtcmConformState
Specifies the action state when the packet is in 'green color'.
permit: permit the packet.
replace-dscp: change the DSCP value of packet.
Enumerationr/w
Enumerated Values:
1other
2permit
3replace-dscp
 .1.3.6.1.4.1.171.12.9.6.1.1.26
swAclMeterSrtcmConformReplaceDscp
Specifies the DSCP value of the packet when packet is in 'green color'.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.12.9.6.1.1.27
swAclMeterSrtcmConformCounterState
Specifies the counter state when the packet is in 'green color'.
1. This is optional. The default is 'disable'.
2. The resource may be limited such that counter can not be turned on. The limitation is project de…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.6.1.1.28
swAclMeterSrtcmExceedState
Specifies the action state when the packet is in 'yellow color'.
permit: permit the packet.
replace-dscp: change the DSCP value of packet.
drop: drop the packet.
Enumerationr/w
Enumerated Values:
1other
2permit
3replace-dscp
4drop
 .1.3.6.1.4.1.171.12.9.6.1.1.29
swAclMeterSrtcmExceedReplaceDscp
Specifies the DSCP value of the packet when packet is in 'yellow color'.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.12.9.6.1.1.30
swAclMeterSrtcmExceedCounterState
Specifies the counter state when the packet is in 'yellow color'.
1. This is optional. The default is 'disable'.
2. The resource may be limited such that counter can not be turned on. The limitation is project d…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.6.1.1.31
swAclMeterSrtcmViolateState
Specifies the action state when the packet is in 'red color'.
permit: permit the packet.
replace-dscp: change the DSCP value of packet.
drop: drop the packet.
Enumerationr/w
Enumerated Values:
1other
2permit
3replace-dscp
4drop
 .1.3.6.1.4.1.171.12.9.6.1.1.32
swAclMeterSrtcmViolateReplaceDscp
Specifies the DSCP value of the packet when packet is in 'red color'.
Integer32r/w
Constraints:
range: 0-63
 .1.3.6.1.4.1.171.12.9.6.1.1.33
swAclMeterSrtcmViolateCounterState
Specifies the counter state when the packet is in 'red color'.
1. This is optional. The default is 'disable'.
2. The resource may be limited so that the counter can not be turned on. The limitation is project de…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.171.12.9.6.1.1.34
swAclMeterRowStatus
This object indicates the status of this entry.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.171.12.9.6.1.1.35