swACLEtherRuleDstMacAddress
ACLMGMT-MIB ·
.1.3.6.1.4.1.171.12.9.3.1.1.5
Object
Specifies that the access rule will apply to only packets with this destination MAC address.
Context
- MIB
- ACLMGMT-MIB
- OID
.1.3.6.1.4.1.171.12.9.3.1.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- swACLEtherRuleEntry
- Table
- swACLEtherRuleTable
- Siblings
- 23
Values & Constraints
Type Constraints
range: 6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swACLEtherRuleProfileID The ID of the ACL rule entry, which is unique to the mask list.
The maximum value of this object depends on the device. | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.1.1.1 |
| swACLEtherRuleReplacePriority Specifies if the switch will change priorities of packets that match the access profile
802.1p priority tag field or not . | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.1.1.10 |
| swACLEtherRuleEnableReplaceDscp Specifies if the switch will change priorities of packets that match the access profile
DSCP field or not.
Replace DSCP and replace ToS precedence can not both be supported. | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.1.1.11 |
| swACLEtherRuleRepDscp Specifies a value to be written to the DSCP field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in… | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.1.1.12 |
| swACLEtherRulePermit This object indicates if the result of the packet examination is 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets matching the access profile are
… | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.1.1.13 |
| swACLEtherRulePort Specifies that the access rule will only apply to port(s).
This object and swACLEtherRuleVID can not be set together. | column | PortList | .1.3.6.1.4.1.171.12.9.3.1.1.14 |
| swACLEtherRuleRowStatus This object indicates the status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.12.9.3.1.1.15 |
| swACLEtherRuleOwner The owner of the ACL rule entry. Only owners can modify this entry. | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.1.1.16 |
| swACLEtherRuleRxRate Specifies the rx rate, 0 denotes no_limit. The maximum value of this object depends on the device. | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.1.1.17 |
| swACLEtherRuleEnableReplaceTosPrecedence Specifies if the switch will change priorities of packets that match the access profile
ToS precedence field or not.
Replace DSCP and replace ToS precedence can not both be suppor… | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.1.1.18 |
| swACLEtherRuleRepTosPrecedence Specifies a value to be written to the ToS precedence field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write th… | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.1.1.19 |
| swACLEtherRuleAccessID The ID of the the ACL rule entry relates to the swACLEtherRuleProfileID.
When row creation is set to 0, assignment of an Access ID for ports is automatic
and the swACLEtherRulePor… | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.1.1.2 |
| swACLEtherRuleVID Specifies the VLAN-based ACL rule. There are two conditions:
1. this rule will apply to all the ports;
2. packets must belong to this VLAN.
This object and swACLEth… | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.1.1.20 |
| swACLEtherRuleMatchVID Specifies that the access rule will apply only to packets with
this VLAN ID. It is applied to the specified ports configured by swACLEtherRulePort. | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.1.1.21 |
| swACLEtherRuleMaskVlan Specifies the per rule mask for the VLAN field as defined in swACLEtherRuleVlan object.
The value of this object when not in use is the corresponding mask in the profile mask.
Onc… | column | OctetString | .1.3.6.1.4.1.171.12.9.3.1.1.22 |
| swACLEtherRuleMaskSrcMacAddress Specifies the per rule mask for the source MAC addres field as defined in swACLEtherRuleSrcMacAddress object.
The value of this object when not in use is the corresponding mask in… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.12.9.3.1.1.23 |
| swACLEtherRuleMaskDstMacAddress Specifies the per rule mask for the destination MAC addres field as defined in swACLEtherRuleDstMacAddress object.
The value of this object when not in use is the corresponding ma… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.12.9.3.1.1.24 |
| swACLEtherRuleVlan Specifies that the access rule will only apply to the packet with the VLAN ID indexed by this VLAN name. | column | OctetString | .1.3.6.1.4.1.171.12.9.3.1.1.3 |
| swACLEtherRuleSrcMacAddress Specifies that the access rule will apply to only packets with
this source MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.12.9.3.1.1.4 |
| swACLEtherRule8021P Specifies that the access rule will apply only to packets with
this 802.1p priority value. A value of -1 indicates that this node
is not actively used. | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.1.1.6 |
| swACLEtherRuleEtherType Specifies that the access rule will apply only to packets with this
hexadecimal 802.1Q Ethernet type value in the packet header. | column | OctetString | .1.3.6.1.4.1.171.12.9.3.1.1.7 |
| swACLEtherRuleEnablePriority Specifies that the access rule will apply only to packets with
priority value. | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.1.1.8 |
| swACLEtherRulePriority Specifies that the priority will be changed in packets while the swACLEtherRuleEnablePriority
is enabled . | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.1.1.9 |