swACLPktContRuleOption2MaskSrcMac
ACLMGMT-MIB ·
.1.3.6.1.4.1.171.12.9.3.10.1.1.22
Object
Specifies the per rule mask of source MAC address field as defined in swACLPktContRuleOption2SrcMac object The value of this object when not in use is the corresponding mask in the profile mask. Once the value of this object is modified, the per rule mask will take effect.
Context
- MIB
- ACLMGMT-MIB
- OID
.1.3.6.1.4.1.171.12.9.3.10.1.1.22- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- swACLPktContRuleOption2Entry
- Table
- swACLPktContRuleOption2Table
- Siblings
- 21
Values & Constraints
Type Constraints
range: 6
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swACLPktContRuleOption2ProfileID The ID of the ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device. | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.10.1.1.1 |
| swACLPktContRuleOption2EnableReplaceDscp Specifies if the switch will change priorities of packets that match the access profile
DSCP field or not.
Replace DSCP and replace ToS precedence can not both be supported. | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.10.1.1.10 |
| swACLPktContRuleOption2RepDscp Specifies a value to be written to the DSCP field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in… | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.10.1.1.11 |
| swACLPktContRuleOption2Permit This object indicates if the result of the packet examination is 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets that match the access profile are
… | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.10.1.1.12 |
| swACLPktContRuleOption2Port Specifies that the access rule will only apply to port(s).
This object and swACLPktContRuleOption2VID can not be set together. | column | PortList | .1.3.6.1.4.1.171.12.9.3.10.1.1.13 |
| swACLPktContRuleOption2Owner The owner of the ACL rule entry. Only owners can modify this entry. | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.10.1.1.17 |
| swACLPktContRuleOption2EnableReplaceTosPrecedence Specifies if the switch will change priorities of packets that match the access profile
ToS precedence field or not.
Replace DSCP and replace ToS precedence can not both be suppor… | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.10.1.1.18 |
| swACLPktContRuleOption2RepTosPrecedence Specifies a value to be written to the ToS precedence field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write th… | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.10.1.1.19 |
| swACLPktContRuleOption2AccessID The ID of the ACL rule entry in relation to the swACLPktContRuleOption2ProfileID.
When row creation is set to 0, access ID is automatically assigned. | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.10.1.1.2 |
| swACLPktContRuleOption2VID Specifies this rule only applies to the specified VLAN. There are two conditions:
1.only the portlist that belongs to this VLAN will be included;
2.packets must belong to this VLA… | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.10.1.1.20 |
| swACLPktContRuleOption2RowStatus This object indicates the status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.12.9.3.10.1.1.21 |
| swACLPktContRuleOption2MaskDstMac Specifies the per rule mask of source MAC address field as defined in swACLPktContRuleOption2DstMac object
The value of this object when not in use is the corresponding mask in th… | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.12.9.3.10.1.1.23 |
| swACLPktContRuleOption2MaskCTag Specifies the per rule mask of the customer VLAN tag field as defined in swACLPktContRuleOption2CTag object
The value of this object when not in use is the corresponding mask in t… | column | OctetString | .1.3.6.1.4.1.171.12.9.3.10.1.1.24 |
| swACLPktContRuleOption2MaskSTag Specifies the per rule mask of the service VLAN tag field as defined in swACLPktContRuleOption2STag object
The value of this object when not in use is the corresponding mask in th… | column | OctetString | .1.3.6.1.4.1.171.12.9.3.10.1.1.25 |
| swACLPktContRuleOption2SrcMac Specifies that the access rule will apply to only packets with
this source MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.12.9.3.10.1.1.3 |
| swACLPktContRuleOption2DstMac Specifies that the access rule will apply to only packets with
this destination MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.171.12.9.3.10.1.1.4 |
| swACLPktContRuleOption2CTag Specifies the frame content of the customer VLAN tag, valid values are only from 0x0000 to 0xFFFF. | column | OctetString | .1.3.6.1.4.1.171.12.9.3.10.1.1.5 |
| swACLPktContRuleOption2STag Specifies the frame content of the service VLAN tag, valid values are only from 0x0000 to 0xFFFF. | column | OctetString | .1.3.6.1.4.1.171.12.9.3.10.1.1.6 |
| swACLPktContRuleOption2EnablePriority Specifies that the access rule will only apply to packets with this
priority value. | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.10.1.1.7 |
| swACLPktContRuleOption2Priority Specifies that the priority will change for the packets while the swACLPktContRuleOption2ReplacePriority
is enabled . | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.10.1.1.8 |
| swACLPktContRuleOption2ReplacePriority Specifies if the switch will change priorities of packets that match the access profile
802.1p priority tag or not. | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.10.1.1.9 |