swACLPktContRuleOptionAccessID
ACLMGMT-MIB ·
.1.3.6.1.4.1.171.12.9.3.7.1.2
Object
column
Integer32
The ID of the ACL rule entry in relation to the swACLPktContRuleProfileID. When row creation is set to 0, access ID is automatically created for the ports in the swACLPktContRulePort to create rule entries for swACLPktContRulePort accordingly. Set to 1-65535 indicates to creswACLPktContRuleRepDscpate the exact access ID for the swACLPktContRulePort. The swACLPktContRulePort must be set to one port only, otherwise the row creation will fail.
Context
- MIB
- ACLMGMT-MIB
- OID
.1.3.6.1.4.1.171.12.9.3.7.1.2- Type
- column
- Access
- readonly
- Status
- current
- Parent
- swACLPktContRuleOptionEntry
- Table
- swACLPktContRuleOptionTable
- Siblings
- 22
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-65535
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swACLPktContRuleOptionProfileID The ID of the ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device. | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.7.1.1 |
| swACLPktContRuleOffsetChunk4Content Specifies the frame content of chunk4. | column | OctetString | .1.3.6.1.4.1.171.12.9.3.7.1.10 |
| swACLPktContRuleOptionEnablePriority Specifies that the access rule will only apply to packets with this
priority value. | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.7.1.11 |
| swACLPktContRuleOptionPriority Specifies that the priority will change for the packets while the swACLPktContRuleReplacePriority
is enabled . | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.7.1.12 |
| swACLPktContRuleOptionReplacePriority Specifies if the switch will change priorities of packets that match the access profile
802.1p priority tag or not. | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.7.1.13 |
| swACLPktContRuleOptionEnableReplaceDscp Specifies if the switch will change priorities of packets that match the access profile
DSCP field or not.
Replace DSCP and replace ToS precedence can not both be supported. | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.7.1.14 |
| swACLPktContRuleOptionRepDscp Specifies a value to be written to the DSCP field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in… | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.7.1.15 |
| swACLPktContRuleOptionPermit This object indicates if the result of the packet examination is 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets that match the access profile are
… | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.7.1.16 |
| swACLPktContRuleOptionPort Specifies that the access rule will only apply to port(s).
This object and swACLPktContRuleOptionVID can not be set together. | column | PortList | .1.3.6.1.4.1.171.12.9.3.7.1.17 |
| swACLPktContRuleOptionRowStatus This object indicates the status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.12.9.3.7.1.18 |
| swACLPktContRuleOptionOwner The owner of the ACL rule entry. Only owners can modify this entry. | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.7.1.19 |
| swACLPktContRuleOptionRxRate Specifies the rx-rate, 0 denotes no_limit. The maximum value of this object depends on the device. | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.7.1.20 |
| swACLPktContRuleOptionEnableReplaceTosPrecedence Specifies if the switch will change priorities of packets that match the access profile
ToS precedence field or not.
Replace DSCP and replace ToS precedence can not both be suppor… | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.7.1.21 |
| swACLPktContRuleOptionRepTosPrecedence Specifies a value to be written to the ToS precedence field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write th… | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.7.1.22 |
| swACLPktContRuleOptionVID Specifies this rule only applies to the specified VLAN. There are two conditions:
1.only the portlist that belongs to this VLAN will be included;
2.packets must belong to this VLA… | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.7.1.23 |
| swACLPktContRuleOffsetChunk1OffsetValue Displays the frame content offset of chunk1. | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.7.1.3 |
| swACLPktContRuleOffsetChunk1Content Specifies the frame content of chunk1. | column | OctetString | .1.3.6.1.4.1.171.12.9.3.7.1.4 |
| swACLPktContRuleOffsetChunk2OffsetValue Displays the frame content offset of chunk2. | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.7.1.5 |
| swACLPktContRuleOffsetChunk2Content Specifies the frame content of chunk2. | column | OctetString | .1.3.6.1.4.1.171.12.9.3.7.1.6 |
| swACLPktContRuleOffsetChunk3OffsetValue Displays the frame content offset of chunk3. | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.7.1.7 |
| swACLPktContRuleOffsetChunk3Content Specifies the frame content of chunk3. | column | OctetString | .1.3.6.1.4.1.171.12.9.3.7.1.8 |
| swACLPktContRuleOffsetChunk4OffsetValue Displays the frame content offset of chunk4. | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.7.1.9 |