swAclMeterTrtcmConformState
ACLMGMT-MIB ·
.1.3.6.1.4.1.171.12.9.6.1.1.13
Object
column
r/w
Enumeration
Specifies the action state when packet is in 'green color'. permit: permit the packet. replace-dscp: change the DSCP value of packet.
Context
- MIB
- ACLMGMT-MIB
- OID
.1.3.6.1.4.1.171.12.9.6.1.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- swAclMeterEntry
- Table
- swAclMeterTable
- Siblings
- 34
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | other |
2 | permit |
3 | replace-dscp |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swAclMeterProfileID The ID of the ACL mask entry is unique in the mask list. The maximum value of this object depends on the device. | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.1 |
| swAclMeterTrtcmPir Specifies the 'Peak Information Rate' of 'two rate three color mode'.
The unit is Kbps. | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.10 |
| swAclMeterTrtcmPbs Specifies the 'peak burst size' of 'two rate three color mode'.
1. The unit is Kbytes. That is to say, 1 means 1kbytes.
2. This parameter is an optional parameter. The default… | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.11 |
| swAclMeterTrtcmColorMode Specifies the meter mode.
The default is color-blind mode. The final color of the packet is determined
by the initial color of the packet and the metering result. | column | Enumeration | .1.3.6.1.4.1.171.12.9.6.1.1.12 |
| swAclMeterTrtcmConformReplaceDscp Specifies the DSCP value of the packet when the packet is in 'green color'. | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.14 |
| swAclMeterTrtcmConformCounterState Specifies the counter state when the packet is in 'green color'.
1. This is optional. The default is 'disable'.
2. The resource may be limited so that the counter can not … | column | Enumeration | .1.3.6.1.4.1.171.12.9.6.1.1.15 |
| swAclMeterTrtcmExceedState Specifies the action state when packet is in 'yellow color'.
permit: permit the packet.
replace-dscp: change the DSCP value of the packet.
drop: drop the packet. | column | Enumeration | .1.3.6.1.4.1.171.12.9.6.1.1.16 |
| swAclMeterTrtcmExceedReplaceDscp Specifies the DSCP value of packet when packet is in 'yellow color'. | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.17 |
| swAclMeterTrtcmExceedCounterState Specifies the counter state when packet is in 'yellow color'.
1. This is optional. The default is 'disable'.
2. The resource may be limited so that the counter can not be … | column | Enumeration | .1.3.6.1.4.1.171.12.9.6.1.1.18 |
| swAclMeterTrtcmViolateState Specifies the action state when packet is in 'red color'.
permit: permit the packet.
replace-dscp: change the DSCP value of packet.
drop: drop the packet. | column | Enumeration | .1.3.6.1.4.1.171.12.9.6.1.1.19 |
| swAclMeterAccessID The ID of the ACL rule entry as related to the swAclMeterProfileID. | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.2 |
| swAclMeterTrtcmViolateReplaceDscp Specifies the DSCP value of the packet when packet is in 'red color'. | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.20 |
| swAclMeterTrtcmViolateCounterState Specifies the counter state when packet is in 'red color'.
1. This is optional. The default is 'disable'.
2. The resource may be limited so that the counter can not be tur… | column | Enumeration | .1.3.6.1.4.1.171.12.9.6.1.1.21 |
| swAclMeterSrtcmCir Specifies the 'committed information rate' of 'single rate three color mode'.
The unit is Kbps. | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.22 |
| swAclMeterSrtcmCbs Specifies the 'committed burst size' of 'single rate three color mode'.
1. The unit is Kbytes. That is to say, 1 means 1Kbytes.
2. The max set value is 16*1024. | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.23 |
| swAclMeterSrtcmEbs Specifies the 'Excess burst size' of 'single rate three color mode'.
1. The unit is Kbytes. That is to say, 1 means 1kbytes.
2. The max set value is 16*1024. | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.24 |
| swAclMeterSrtcmColorMode Specifies the meter mode.
The default is color-blind mode. The final color of packet is determined
by the initial color of the packet and the metering result. | column | Enumeration | .1.3.6.1.4.1.171.12.9.6.1.1.25 |
| swAclMeterSrtcmConformState Specifies the action state when the packet is in 'green color'.
permit: permit the packet.
replace-dscp: change the DSCP value of packet. | column | Enumeration | .1.3.6.1.4.1.171.12.9.6.1.1.26 |
| swAclMeterSrtcmConformReplaceDscp Specifies the DSCP value of the packet when packet is in 'green color'. | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.27 |
| swAclMeterSrtcmConformCounterState Specifies the counter state when the packet is in 'green color'.
1. This is optional. The default is 'disable'.
2. The resource may be limited such that counter can not be… | column | Enumeration | .1.3.6.1.4.1.171.12.9.6.1.1.28 |
| swAclMeterSrtcmExceedState Specifies the action state when the packet is in 'yellow color'.
permit: permit the packet.
replace-dscp: change the DSCP value of packet.
drop: drop the packet. | column | Enumeration | .1.3.6.1.4.1.171.12.9.6.1.1.29 |
| swAclMeterRate Specifies the committed bandwidth in Kbps for the flow.
NOTE:
1. Specifying 0 will disable this flow meter setting.
2. Users must set the swAclMeterActionForRateExceed obj… | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.3 |
| swAclMeterSrtcmExceedReplaceDscp Specifies the DSCP value of the packet when packet is in 'yellow color'. | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.30 |
| swAclMeterSrtcmExceedCounterState Specifies the counter state when the packet is in 'yellow color'.
1. This is optional. The default is 'disable'.
2. The resource may be limited such that counter can not b… | column | Enumeration | .1.3.6.1.4.1.171.12.9.6.1.1.31 |
| swAclMeterSrtcmViolateState Specifies the action state when the packet is in 'red color'.
permit: permit the packet.
replace-dscp: change the DSCP value of packet.
drop: drop the packet. | column | Enumeration | .1.3.6.1.4.1.171.12.9.6.1.1.32 |
| swAclMeterSrtcmViolateReplaceDscp Specifies the DSCP value of the packet when packet is in 'red color'. | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.33 |
| swAclMeterSrtcmViolateCounterState Specifies the counter state when the packet is in 'red color'.
1. This is optional. The default is 'disable'.
2. The resource may be limited so that the counter can not be… | column | Enumeration | .1.3.6.1.4.1.171.12.9.6.1.1.34 |
| swAclMeterRowStatus This object indicates the status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.12.9.6.1.1.35 |
| swAclMeterActionForRateExceed Specifies the action to take for those packets exceeding the committed rate.
NOTE:
Users must also set the swAclMeterRate to activate this entry. | column | Enumeration | .1.3.6.1.4.1.171.12.9.6.1.1.4 |
| swAclMeterRemarkDscp Mark the packet with a specified DSCP.
It can be set when swAclMeterActionForRateExceed sets remark-dscp (3). | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.5 |
| swAclMeterBurstSize This specifies the burst size for the single rate two color mode.
The unit is Kbytes. That is to say, 1 means 1kbytes.
The set value range is 0..n, the value n is determined by pr… | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.6 |
| swAclMeterMode tr-tcm: two rate three color mode;
sr-tcm: single rate three color mode. | column | Enumeration | .1.3.6.1.4.1.171.12.9.6.1.1.7 |
| swAclMeterTrtcmCir Specifies the 'committed information rate' of 'two rate three color mode'.
The unit is Kbps. | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.8 |
| swAclMeterTrtcmCbs Specifies the 'committed burst size' of 'two rate three color mode'.
1. The unit is Kbytes. That is to say, 1 means 1Kbytes.
2. This parameter is an optional parameter. The de… | column | Integer32 | .1.3.6.1.4.1.171.12.9.6.1.1.9 |