swACLEtherRulePermit

ACLMGMT-MIB · .1.3.6.1.4.1.171.12.9.3.1.1.13
MIB view Table view

Object

column r/w Enumeration 
This object indicates if the result of the packet examination is 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets matching the access profile are
         permitted to be forwarded by the switch.
deny - Specifies that packets matching the access profile
       are not permitted to be forwarded by the switch and will be filtered.
mirror - Specifies that packets matching the access profile are copied to the mirror port.
         Note : The ACL mirror function will start functioning after mirror has been enabled
                and the mirror port has been configured.
set-drop-precedence - Specifies that packets that matching the access profile are set
                      to drop precedence.

Context

MIB
ACLMGMT-MIB
OID
.1.3.6.1.4.1.171.12.9.3.1.1.13
Type
column
Access
readwrite
Status
current
Parent
swACLEtherRuleEntry
Table
swACLEtherRuleTable
Siblings
23

Syntax

Enumeration

Values & Constraints

Enumerated Values
1deny
2permit
3mirror
5set-drop-precedence

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
swACLEtherRuleProfileID
The ID of the ACL rule entry, which is unique to the mask list. The maximum value of this object depends on the device.
columnInteger32.1.3.6.1.4.1.171.12.9.3.1.1.1
swACLEtherRuleReplacePriority
Specifies if the switch will change priorities of packets that match the access profile 802.1p priority tag field or not .
columnEnumeration.1.3.6.1.4.1.171.12.9.3.1.1.10
swACLEtherRuleEnableReplaceDscp
Specifies if the switch will change priorities of packets that match the access profile DSCP field or not. Replace DSCP and replace ToS precedence can not both be supported.
columnEnumeration.1.3.6.1.4.1.171.12.9.3.1.1.11
swACLEtherRuleRepDscp
Specifies a value to be written to the DSCP field of an incoming packet that meets the criteria specified in the first part of the command. This value will over-write the value in…
columnInteger32.1.3.6.1.4.1.171.12.9.3.1.1.12
swACLEtherRulePort
Specifies that the access rule will only apply to port(s). This object and swACLEtherRuleVID can not be set together.
columnPortList.1.3.6.1.4.1.171.12.9.3.1.1.14
swACLEtherRuleRowStatus
This object indicates the status of this entry.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.171.12.9.3.1.1.15
swACLEtherRuleOwner
The owner of the ACL rule entry. Only owners can modify this entry.
columnEnumeration.1.3.6.1.4.1.171.12.9.3.1.1.16
swACLEtherRuleRxRate
Specifies the rx rate, 0 denotes no_limit. The maximum value of this object depends on the device.
columnInteger32.1.3.6.1.4.1.171.12.9.3.1.1.17
swACLEtherRuleEnableReplaceTosPrecedence
Specifies if the switch will change priorities of packets that match the access profile ToS precedence field or not. Replace DSCP and replace ToS precedence can not both be suppor…
columnEnumeration.1.3.6.1.4.1.171.12.9.3.1.1.18
swACLEtherRuleRepTosPrecedence
Specifies a value to be written to the ToS precedence field of an incoming packet that meets the criteria specified in the first part of the command. This value will over-write th…
columnInteger32.1.3.6.1.4.1.171.12.9.3.1.1.19
swACLEtherRuleAccessID
The ID of the the ACL rule entry relates to the swACLEtherRuleProfileID. When row creation is set to 0, assignment of an Access ID for ports is automatic and the swACLEtherRulePor…
columnInteger32.1.3.6.1.4.1.171.12.9.3.1.1.2
swACLEtherRuleVID
Specifies the VLAN-based ACL rule. There are two conditions: 1. this rule will apply to all the ports; 2. packets must belong to this VLAN. This object and swACLEth…
columnInteger32.1.3.6.1.4.1.171.12.9.3.1.1.20
swACLEtherRuleMatchVID
Specifies that the access rule will apply only to packets with this VLAN ID. It is applied to the specified ports configured by swACLEtherRulePort.
columnInteger32.1.3.6.1.4.1.171.12.9.3.1.1.21
swACLEtherRuleMaskVlan
Specifies the per rule mask for the VLAN field as defined in swACLEtherRuleVlan object. The value of this object when not in use is the corresponding mask in the profile mask. Onc…
columnOctetString.1.3.6.1.4.1.171.12.9.3.1.1.22
swACLEtherRuleMaskSrcMacAddress
Specifies the per rule mask for the source MAC addres field as defined in swACLEtherRuleSrcMacAddress object. The value of this object when not in use is the corresponding mask in…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.171.12.9.3.1.1.23
swACLEtherRuleMaskDstMacAddress
Specifies the per rule mask for the destination MAC addres field as defined in swACLEtherRuleDstMacAddress object. The value of this object when not in use is the corresponding ma…
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.171.12.9.3.1.1.24
swACLEtherRuleVlan
Specifies that the access rule will only apply to the packet with the VLAN ID indexed by this VLAN name.
columnOctetString.1.3.6.1.4.1.171.12.9.3.1.1.3
swACLEtherRuleSrcMacAddress
Specifies that the access rule will apply to only packets with this source MAC address.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.171.12.9.3.1.1.4
swACLEtherRuleDstMacAddress
Specifies that the access rule will apply to only packets with this destination MAC address.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.171.12.9.3.1.1.5
swACLEtherRule8021P
Specifies that the access rule will apply only to packets with this 802.1p priority value. A value of -1 indicates that this node is not actively used.
columnInteger32.1.3.6.1.4.1.171.12.9.3.1.1.6
swACLEtherRuleEtherType
Specifies that the access rule will apply only to packets with this hexadecimal 802.1Q Ethernet type value in the packet header.
columnOctetString.1.3.6.1.4.1.171.12.9.3.1.1.7
swACLEtherRuleEnablePriority
Specifies that the access rule will apply only to packets with priority value.
columnEnumeration.1.3.6.1.4.1.171.12.9.3.1.1.8
swACLEtherRulePriority
Specifies that the priority will be changed in packets while the swACLEtherRuleEnablePriority is enabled .
columnInteger32.1.3.6.1.4.1.171.12.9.3.1.1.9