swACLPktContRuleEnableReplaceDscp
ACLMGMT-MIB ·
.1.3.6.1.4.1.171.12.9.3.3.1.11
Object
column
r/w
Enumeration
Specifies if the switch will change priorities of packets that match the access profile DSCP field or not. Replace DSCP and replace ToS precedence can not both be supported.
Context
- MIB
- ACLMGMT-MIB
- OID
.1.3.6.1.4.1.171.12.9.3.3.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- swACLPktContRuleEntry
- Table
- swACLPktContRuleTable
- Siblings
- 19
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| swACLPktContRuleProfileID The ID of the ACL mask entry, which is unique to the mask list. The maximum value of this object depends on the device. | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.3.1.1 |
| swACLPktContRuleReplacePriority Specifies if the switch will change priorities of packets that match the access profile
802.1p priority tag or not. | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.3.1.10 |
| swACLPktContRuleRepDscp Specifies a value to be written to the DSCP field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write the value in… | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.3.1.12 |
| swACLPktContRulePermit This object indicates if the result of the packet examination is 'permit' or 'deny'.
The default is 'permit'.
permit - Specifies that packets matching the access profile are
… | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.3.1.13 |
| swACLPktContRulePort Specifies that the access rule will only apply to port(s).
This object and swACLPktContRuleVID can not be set together. | column | PortList | .1.3.6.1.4.1.171.12.9.3.3.1.14 |
| swACLPktContRuleRowStatus This object indicates the status of this entry. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.171.12.9.3.3.1.15 |
| swACLPktContRuleOwner The owner of the ACL rule entry. Only owners can modify this entry. | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.3.1.16 |
| swACLPktContRuleRxRate Specifies the rx-rate, 0 denotes no_limit. The maximum value of this object depends on the device. | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.3.1.17 |
| swACLPktContRuleEnableReplaceTosPrecedence Specifies if the switch will change priorities of packets that match the access profile
ToS precedence field or not.
Replace DSCP and replace ToS precedence can not both be suppor… | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.3.1.18 |
| swACLPktContRuleRepTosPrecedence Specifies a value to be written to the ToS precedence field of an incoming packet
that meets the criteria specified in the first part of the command.
This value will over-write th… | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.3.1.19 |
| swACLPktContRuleAccessID The ID of the ACL rule entry in relation to the swACLPktContRuleProfileID.
When row creation is set to 0, an access ID is automatically created
for the ports in the swACLPktContRu… | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.3.1.2 |
| swACLPktContRuleVID Specifies this rule only applies to the specified VLAN. There are two conditions:
1.only the portlist that belongs to this VLAN will be included;
2.packets must belong to this VLA… | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.3.1.20 |
| swACLPktContRuleOffset0to15 Specifies that the rule applies to the user-defined packet. | column | OctetString | .1.3.6.1.4.1.171.12.9.3.3.1.3 |
| swACLPktContRuleOffset16to31 Specifies that the rule applies to the user-defined packet. | column | OctetString | .1.3.6.1.4.1.171.12.9.3.3.1.4 |
| swACLPktContRuleOffset32to47 Specifies that the rule applies to the user-defined packet. | column | OctetString | .1.3.6.1.4.1.171.12.9.3.3.1.5 |
| swACLPktContRuleOffset48to63 Specifies that the rule applies to the user-defined packet. | column | OctetString | .1.3.6.1.4.1.171.12.9.3.3.1.6 |
| swACLPktContRuleOffset64to79 Specifies that the rule applies to the user-defined packet. | column | OctetString | .1.3.6.1.4.1.171.12.9.3.3.1.7 |
| swACLPktContRuleEnablePriority Specifies that the access rule will apply only to packets with this
priority value. | column | Enumeration | .1.3.6.1.4.1.171.12.9.3.3.1.8 |
| swACLPktContRulePriority Specifies the priority will change for the packets while the swACLPktContRuleReplacePriority
is enabled . | column | Integer32 | .1.3.6.1.4.1.171.12.9.3.3.1.9 |