MX-ISDN-MIB Table View

Primary Rate Interface
          
Configuration parameters related to the Primary Rate interfaces
on this managed device.

primaryRateInterfaceEntry row .0.1850.1.200.100.1

A row in table Primary Rate Interface.

Indexes

primaryRateInterfaceName

Column	Syntax	OID
primaryRateInterfaceName Name Name that identifies the interface.	OctetString	.0.1850.1.200.100.1.100
primaryRateInterfaceEndpointType Endpoint Type Defines the endpoint type: * Te: Terminal Equipment * Nt: Network Termination When the SignalingChannel.Protocol parameter is set to QSIG, the endpoint type…	Enumerationr/w Enumerated Values: 100 te 200 nt	.0.1850.1.200.100.1.200
primaryRateInterfacePortPinout Port Pinout Defines the port pinout: * Auto: The pinout is set according to the endpoint type. * Te: Force the pinout to TE regardless of the endpoint type. * Nt: Force the pinout to …	Enumerationr/w Enumerated Values: 100 auto 200 te 300 nt	.0.1850.1.200.100.1.250
primaryRateInterfaceLineCoding Line Coding Defines the transmission encoding of bits: * B8ZS: Bipolar with 8-Zeros Substitution (T1 lines) * HDB3: High-Density Bipolar with 3-zeros (E1 lines) * AMI: Alternate Mark …	Enumerationr/w Enumerated Values: 100 b8zs 200 hdb3 300 ami	.0.1850.1.200.100.1.400
primaryRateInterfaceLineFraming Line Framing Defines the frame format: * SF: Super frame. Sometimes known as D4 (T1 lines) * ESF: Extended super frame (T1 lines) * CRC4: Cyclic redundancy check 4 (E1 lines) * NO-C…	Enumerationr/w Enumerated Values: 100 sf 200 esf 300 crc4 400 noCrc4	.0.1850.1.200.100.1.500
primaryRateInterfaceNetworkLocation Network Location Defines the value of the network location in the progress indicator messages sent by the unit.	Enumerationr/w Enumerated Values: 100 user 200 private 300 public 400 transit 500 international	.0.1850.1.200.100.1.600
primaryRateInterfacePreferredEncodingScheme Preferred Encoding Scheme Defines the preferred data encoding scheme in the bearer capabilities (user information layer 1 protocol). This encoding scheme is used when initiating a call on the ISDN side.	Enumerationr/w Enumerated Values: 100 g711alaw 200 g711ulaw	.0.1850.1.200.100.1.700
primaryRateInterfaceFallbackEncodingScheme Fallback Encoding Scheme Defines the fallback data encoding scheme in the bearer capabilities (user information layer 1 protocol).	Enumerationr/w Enumerated Values: 100 g711alaw 200 g711ulaw	.0.1850.1.200.100.1.750
primaryRateInterfaceChannelRange Channel Range Defines the range of active bearer channels.	OctetStringr/w Constraints: range: 1-10	.0.1850.1.200.100.1.800
primaryRateInterfaceIncomingChannelRange Channel Range Reserved for Incoming Calls Bearer channels are by default usable for both incoming and outgoing calls. Use this range to reserve channels for incoming calls. NOTE: Channels o…	OctetStringr/w Constraints: range: 0-255	.0.1850.1.200.100.1.830
primaryRateInterfaceOutgoingChannelRange Channel Range Reserved for Outgoing Calls Bearer channels are by default usable for both incoming and outgoing calls. Use this range to reserve channels for outgoing calls. NOTE: Channels o…	OctetStringr/w Constraints: range: 0-255	.0.1850.1.200.100.1.860
primaryRateInterfaceChannelAllocationStrategy Channel Allocation Strategy Defines the strategy for selecting bearer channels. Available strategies are: * Ascending: select the lowest-numbered non-busy bearer channel * Descendin…	Enumerationr/w Enumerated Values: 100 ascending 200 descending 300 roundRobinAscending 400 roundRobinDescending	.0.1850.1.200.100.1.900
primaryRateInterfaceMaxActiveCalls Maximum Active Calls Defines the maximum number of active calls on the interface. Note: The special value 0 indicates no maximum number of active calls.	Unsigned32r/w Constraints: range: 0-30	.0.1850.1.200.100.1.1000
primaryRateInterfaceSignalInformationElementEnable Signal Information Element Enable Defines whether the signal information element is enabled on the interface. When activated at the Network UNI-side ( PrimaryRateInterfaceEndpointType parameter set to Nt)…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.200.100.1.1050
primaryRateInterfaceInbandToneGenerationEnable Inband Tone Generation Enable Defines whether inband tone generation is enabled on the interface. When activated at the User UNI-side ( PrimaryRateInterfaceEndpointType parameter set to Te)…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.200.100.1.1100
primaryRateInterfaceInbandDtmfDialingEnable Inband DTMF Dialing Enable Defines whether inband DTMF dialing is enabled.	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.200.100.1.1200
primaryRateInterfaceOverlapDialingEnable Overlap Dialing Enable Defines whether overlap dialing is enabled on the interface.	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.200.100.1.1300
primaryRateInterfaceCallingNameMaxLength Calling Name Maximum Length Defines the maximum length of the calling party name for calls from SIP to ISDN on the interface.	Unsigned32r/w Constraints: range: 0-82	.0.1850.1.200.100.1.1400
primaryRateInterfaceExclusiveBChannelSelectionEnable Exclusive Bearer Channel Selection Enable Defines whether exclusive B-Channel selection is enabled for calls from SIP to ISDN on the interface.	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.200.100.1.1500
primaryRateInterfaceSendingCompleteEnable Sending Complete Enable Defines whether the Sending Complete information element in SETUP messages is enabled for calls from SIP to ISDN on the interface.	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.200.100.1.1600
primaryRateInterfaceClipEnable Calling Line Information Presentation Enable Enables the CLIP service, which is offered to the called party to see the calling party's ISDN number. CLIP is complemented by privacy rules controlled by the …	Enumerationr/w Enumerated Values: 0 userOnly 1 enable 2 disable	.0.1850.1.200.100.1.1700
primaryRateInterfaceClirEnable Calling Line Information Restriction Enable Enables the CLIR service, which is offered to the calling party to restrict presentation of the calling party's ISDN number to the called party. …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.200.100.1.1725
primaryRateInterfaceClirOverrideEnable Calling Line Information Restriction Override Enable Enables the CLIR override option. This option allows the calling party number to be presented to the destination party even when the Calling Party Numb…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.200.100.1.1750
primaryRateInterfaceSendRestartOnStartupEnable Send Restart On Startup Enable Defines whether the RESTART message is sent upon a signaling channel 'UP' event	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.200.100.1.1800

Primary Rate Interface Interop
          
Interop configuration parameters related to the Primary Rate interfaces on
this managed device.

primaryRateInterfaceInteropEntry row .0.1850.1.200.50000.100.1

A row in table Primary Rate Interface Interop.

Indexes

primaryRateInterfaceInteropName

Column	Syntax	OID
primaryRateInterfaceInteropName Name Name that identifies the interface.	OctetString	.0.1850.1.200.50000.100.1.100
primaryRateInterfaceInteropProgressIndicatorInSetupEnable Progress Indicator In Setup Defines whether or not the Progress Indicator information element is allowed in the SETUP message when acting as the originating side. See the SignalingChannel.S…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.200.50000.100.1.200
primaryRateInterfaceInteropProgressIndicatorInSetupAckEnable Progress Indicator In Setup Ack Defines whether or not the Progress Indicator information element is allowed in the SETUP ACK when acting as the terminating side. See the SignalingChannel.S…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.200.50000.100.1.300
primaryRateInterfaceInteropProgressIndicatorInCallProgressForSetupEnable Progress Indicator In Call Progress For Setup Defines whether or not the Progress Indicator information element is allowed in the CALL PROCEEDING message in response to a SETUP message when acting as the …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.200.50000.100.1.400
primaryRateInterfaceInteropProgressIndicatorInProgressEnable Progress Indicator In Progress Defines whether or not the Progress Indicator information element is allowed in the PROGRESS message in response to a SETUP message when acting as the terminating side. …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.200.50000.100.1.450
primaryRateInterfaceInteropProgressIndicatorInAlertingEnable Progress Indicator In Alerting Defines whether or not the Progress Indicator information element is allowed in the ALERTING message. See the SignalingChannel.SendProgressIndicatorIE paramet…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.200.50000.100.1.500
primaryRateInterfaceInteropProgressIndicatorInConnectEnable Progress Indicator In Connect Defines whether or not the Progress Indicator information element is allowed in the CONNECT message. See the SignalingChannel.SendProgressIndicatorIE parameter…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.200.50000.100.1.600
primaryRateInterfaceInteropMaximumFacilityWaitingDelay Maximum FACILITY Waiting Delay Defines the maximum amount of time to wait for a FACILITY message, after receiving a SETUP message, before going on with normal call processing. After receivi…	Unsigned32r/w Constraints: range: 0-1500	.0.1850.1.200.50000.100.1.700
primaryRateInterfaceInteropUseImplicitInbandInfoEnable Use Implicit Inband Information This parameter defines how to interpret an incoming ISDN response message with a Progress Indicator information element No. 1 (the call is not end-to-end ISDN; further call…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.200.50000.100.1.800

Basic Rate Interface
          
Configuration and operational parameters for all physical Basic
Rate interfaces on this managed device.

basicRateInterfaceEntry row .0.1850.1.300.100.1

A row in table Basic Rate Interface.

Indexes

basicRateInterfaceName

Column	Syntax	OID
basicRateInterfaceName Name The physical interface name.	OctetString	.0.1850.1.300.100.1.100
basicRateInterfaceEndpointType Endpoint Type Defines the endpoint type: * Te: Terminal Equipment * Nt: Network Termination When the SignalingChannel.Protocol parameter is set to QSIG, the endpoint type…	Enumerationr/w Enumerated Values: 100 te 200 nt	.0.1850.1.300.100.1.200
basicRateInterfaceConnectionType Connection Type Defines the connection type: * PointToPoint: Can only attach one device (for instance a PABX or PSTN) * PointToMultiPoint: Can attach more than one device …	Enumerationr/w Enumerated Values: 100 pointToPoint 200 pointToMultiPoint	.0.1850.1.300.100.1.300
basicRateInterfaceNetworkLocation Network Location Defines the value of the network location in the progress indicator messages sent by the unit.	Enumerationr/w Enumerated Values: 100 user 200 private 300 public 400 transit 500 international	.0.1850.1.300.100.1.600
basicRateInterfacePreferredEncodingScheme Preferred Encoding Scheme Defines the preferred data encoding scheme in the bearer capabilities (user information layer 1 protocol). This encoding scheme is used when initiating a call on the ISDN side.	Enumerationr/w Enumerated Values: 100 g711alaw 200 g711ulaw	.0.1850.1.300.100.1.700
basicRateInterfaceFallbackEncodingScheme Fallback Encoding Scheme Defines the fallback data encoding scheme in the bearer capabilities (user information layer 1 protocol).	Enumerationr/w Enumerated Values: 100 g711alaw 200 g711ulaw	.0.1850.1.300.100.1.750
basicRateInterfaceChannelAllocationStrategy Channel Allocation Strategy Defines the strategy for selecting bearer channels. Available strategies are: * Ascending: select the lowest-numbered non-busy bearer channel * Descendin…	Enumerationr/w Enumerated Values: 100 ascending 200 descending 300 roundRobinAscending 400 roundRobinDescending	.0.1850.1.300.100.1.900
basicRateInterfaceMaxActiveCalls Maximum Active Calls Defines the maximum number of active calls on the interface. Note: The special value 0 indicates no maximum number of active calls.	Unsigned32r/w Constraints: range: 0-2	.0.1850.1.300.100.1.1000
basicRateInterfaceSignalInformationElementEnable Signal Information Element Enable Defines whether the signal information element is enabled on the interface. When activated at the Network UNI-side ( BasicRateInterfaceEndpointType parameter set to Nt), …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.300.100.1.1050
basicRateInterfaceInbandToneGenerationEnable Inband Tone Generation Enable Defines whether inband tone generation is enabled on the interface. When activated at the User UNI-side ( BasicRateInterfaceEndpointType parameter set to Te), only the ringba…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.300.100.1.1100
basicRateInterfaceInbandDtmfDialingEnable Inband DTMF Dialing Enable Defines whether inband DTMF dialing is enabled.	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.300.100.1.1200
basicRateInterfaceOverlapDialingEnable Overlap Dialing Enable Defines whether overlap dialing is enabled on the interface.	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.300.100.1.1300
basicRateInterfaceCallingNameMaxLength Calling Name Maximum Length Defines the maximum length of the calling party name for calls from SIP to ISDN on the interface.	Unsigned32r/w Constraints: range: 0-82	.0.1850.1.300.100.1.1400
basicRateInterfaceExclusiveBChannelSelectionEnable Exclusive Bearer Channel Selection Enable Defines whether exclusive B-Channel selection is enabled for calls from SIP to ISDN on the interface.	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.300.100.1.1500
basicRateInterfaceSendingCompleteEnable Sending Complete Enable Defines whether the Sending Complete information element in SETUP messages is enabled for calls from SIP to ISDN on the interface.	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.300.100.1.1600
basicRateInterfaceClipEnable Calling Line Information Presentation Enable Enables the CLIP service, which is offered to the called party to see the calling party's ISDN number. CLIP is complemented by privacy rules controlled by the …	Enumerationr/w Enumerated Values: 0 userOnly 1 enable 2 disable	.0.1850.1.300.100.1.1700
basicRateInterfaceClirEnable Calling Line Information Restriction Enable Enables the CLIR service, which is offered to the calling party to restrict presentation of the calling party's ISDN number to the called party. …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.300.100.1.1725
basicRateInterfaceClirOverrideEnable Calling Line Information Restriction Override Enable Enables the CLIR override option. This option allows the calling party number to be presented to the destination party even when the Calling Party Numb…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.300.100.1.1750
basicRateInterfaceSendRestartOnStartupEnable Send Restart On Startup Enable Defines whether the RESTART message is sent upon a signaling channel 'UP' event	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.300.100.1.1800
basicRateInterfaceHookFlashKeypad Hook-Flash Keypad The actual keypad string that is to be considered as a hook-flash. Setting this parameter to an empty string disables the hook-flash detection. The permitte…	OctetStringr/w Constraints: range: 0-32	.0.1850.1.300.100.1.1900
basicRateInterfaceKeypadReceptionTimeout Keypad Reception Timeout The actual time to wait before considering the keypad reception over. The value is expressed in seconds. Setting this parameter to 0 disables the tim…	Unsigned32r/w Constraints: range: 0-4	.0.1850.1.300.100.1.2000
basicRateInterfaceMsn MSN This enables the MSN supplementary service with a comma separated list of numbers. The MSN supplementary service shall enable each individual terminal on one access to have one or more …	OctetStringr/w Constraints: range: 0-255	.0.1850.1.300.100.1.2200
basicRateInterfaceMsn2deprecated MSN 2 Deprecated: Use Isdn.BasicRateInterface.Msn instead. This enables the MSN supplementary service with these numbers. The MSN supplementary service shall enable each individual terminal…	OctetStringr/w Constraints: range: 0-32	.0.1850.1.300.100.1.2300
basicRateInterfaceMsn3deprecated MSN 3 Deprecated: Use Isdn.BasicRateInterface.Msn instead. This enables the MSN supplementary service with these numbers. The MSN supplementary service shall enable each individual terminal…	OctetStringr/w Constraints: range: 0-32	.0.1850.1.300.100.1.2400
basicRateInterfaceTeiNegotiation TEI Negotiation Sets the Terminal Endpoint Identifier (TEI) negotiation strategy. * LinkUp: Each time the physical link comes up, the unit renegotiates the TEI value. * PowerUp: Whe…	Enumerationr/w Enumerated Values: 100 linkUp 200 powerUp 300 signalingUp	.0.1850.1.300.100.1.2500

Basic Rate Interface Interop
          
Interop configuration parameters related to the Basic Rate interfaces on
this managed device.

basicRateInterfaceInteropEntry row .0.1850.1.300.50000.100.1

A row in table Basic Rate Interface Interop.

Indexes

basicRateInterfaceInteropName

Column	Syntax	OID
basicRateInterfaceInteropName Name Name that identifies the interface.	OctetString	.0.1850.1.300.50000.100.1.100
basicRateInterfaceInteropProgressIndicatorInSetupEnable Progress Indicator In Setup Defines whether or not the Progress Indicator information element is allowed in the SETUP message when acting as the originating side. See the SignalingChannel.S…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.300.50000.100.1.200
basicRateInterfaceInteropProgressIndicatorInSetupAckEnable Progress Indicator In Setup Ack Defines whether or not the Progress Indicator information element is allowed in the SETUP ACK when acting as the terminating side. See the SignalingChannel.S…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.300.50000.100.1.300
basicRateInterfaceInteropProgressIndicatorInCallProgressForSetupEnable Progress Indicator In Call Progress For Setup Defines whether or not the Progress Indicator information element is allowed in the CALL PROCEEDING message in response to a SETUP message when acting as the …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.300.50000.100.1.400
basicRateInterfaceInteropProgressIndicatorInProgressEnable Progress Indicator In Progress Defines whether or not the Progress Indicator information element is allowed in the PROGRESS message in response to a SETUP message when acting as the terminating side. …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.300.50000.100.1.450
basicRateInterfaceInteropProgressIndicatorInAlertingEnable Progress Indicator In Alerting Defines whether or not the Progress Indicator information element is allowed in the ALERTING message. See the SignalingChannel.SendProgressIndicatorIE paramet…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.300.50000.100.1.500
basicRateInterfaceInteropProgressIndicatorInConnectEnable Progress Indicator In Connect Defines whether or not the Progress Indicator information element is allowed in the CONNECT message. See the SignalingChannel.SendProgressIndicatorIE parameter…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.300.50000.100.1.600
basicRateInterfaceInteropMaximumFacilityWaitingDelay Maximum FACILITY Waiting Delay Defines the maximum amount of time to wait for a FACILITY message, after receiving a SETUP message, before going on with normal call processing. After receivi…	Unsigned32r/w Constraints: range: 0-1500	.0.1850.1.300.50000.100.1.700
basicRateInterfaceInteropUseImplicitInbandInfoEnable Use Implicit Inband Information This parameter defines how to interpret an incoming ISDN response message with a Progress Indicator information element No. 1 (the call is not end-to-end ISDN; further call…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.300.50000.100.1.800
basicRateInterfaceInteropAllowTeiBroadcastInPtpEnable Allow TEI Broadcast in Point-to-Point Defines whether or not an ISDN message with a TEI broadcast needs to be interpreted as a TEI 0 when the connection type is 'PointToPoint' (see BasicRateInterfaceGroup…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.300.50000.100.1.900

Bearer Channel Info
          
Port-specific operational, statistics, and active call data
for ISDN B channels.

bearerChannelInfoEntry row .0.1850.1.400.100.1

A row in table Bearer Channel Info.

Indexes

bearerChannelInfoIndex

Column	Syntax	OID
bearerChannelInfoIndex Index Identifies the Bearer Channel..	OctetString	.0.1850.1.400.100.1.100
bearerChannelInfoState State The current call control state for this channel: * Idle: The channel is available * InUse: The channel is currently used * Maintenance: Maintenance state, temporarily unavailabl…	Enumeration Enumerated Values: 100 idle 200 inUse 300 maintenance 400 error 500 disabled	.0.1850.1.400.100.1.200

Signaling
          
ISDN signaling table containing configuration and operational
parameters for all ISDN signaling channels on this managed
device.

signalingChannelEntry row .0.1850.1.500.100.1

A row in table Signaling.

Indexes

signalingChannelInterfaceName

Column	Syntax	OID
signalingChannelInterfaceName Interface Name Identifies the interface.	OctetString	.0.1850.1.500.100.1.100
signalingChannelProtocol Protocol Defines the protocol to use for the signaling channel: * DSS1: Digital Subscriber Signaling System No.1 * DMS100: Digital Multiplex System 100 * NI2: National ISDN No.2 * E…	Enumerationr/w Enumerated Values: 100 dss1 200 dms100 300 ni2 400 ess5 500 qSig	.0.1850.1.500.100.1.200
signalingChannelFacilityServicesEnable Facility Services Enable Defines whether or not supplementary services FACILITY messages and FACILITY information elements should be enabled on the ISDN interface. Disable: Facility informa…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.500.100.1.250
signalingChannelColpEnable Connected Line Identification Presentation Enable Defines the Connected Number Information Element at the originating ISDN side: * Enable: Sends a Connected Number IE within the CONNECT …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.500.100.1.300
signalingChannelColrEnable Connected Line Identification Restriction Enable Defines the Connected Number Information Element restriction at the destination ISDN side: * enable: When activated at the User UNI-side (…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.500.100.1.400
signalingChannelColrOverrideEnable Connected Line Identification Restriction Override Enable Defines the Connected Number Information Element restriction override at the originating ISDN side: * enable: When activated at t…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.500.100.1.500
signalingChannelConpEnable Connected Name Identification Presentation Enable Connected Name identification Presentation (CONP) is a supplementary service which provides the name of the answering or alerting user to the calling user…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.500.100.1.510
signalingChannelOutgoingNotifyEnable Outgoing Notify Enable Defines if NOTIFY messages can be sent. * Enable: NOTIFY messages can be sent. * Disable: NOTIFY messages are never sent. The following NOTIFY mess…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.500.100.1.600
signalingChannelAcceptedProgressCauses Accepted PROGRESS Causes Sets the range of PROGRESS causes accepted by the unit. Causes excluded from this range trigger call disconnections. The string has the following syntax: …	OctetStringr/w Constraints: range: 0-255	.0.1850.1.500.100.1.700
signalingChannelAutoCancelTimeout Auto Cancel Timeout Time, in seconds, the endpoint rings before the call is automatically cancelled. Setting this parameter to 0 disables the timeout. Calls will not be automatically cancel…	Unsigned32r/w Constraints: range: 0-180	.0.1850.1.500.100.1.800
signalingChannelDateTimeIeSupport Date/Time IE Defines if the optional Date/Time Information Element (IE) can be sent into the CONNECT and SETUP messages issued over BRI and PRI. * None: Date/Time IE is not sent. * Loca…	Enumerationr/w Enumerated Values: 100 none 200 localTime 300 utc	.0.1850.1.500.100.1.900
signalingChannelMaintenanceServiceCallTermination Maintenance Service Call Termination Describes the call termination strategy after reception of a service message requesting a maintenance on the associated bearer channel. * Graceful: Th…	Enumerationr/w Enumerated Values: 100 graceful 200 abrupt	.0.1850.1.500.100.1.10000
signalingChannelLinkEstablishment Link Establishment Sets the link establishment strategy. * OnDemand: When the data link is shut down, the unit establishes a new link only when required. * Permanent: When the data …	Enumerationr/w Enumerated Values: 100 onDemand 200 permanent	.0.1850.1.500.100.1.10100
signalingChannelLinkEstablishmentTimer Link Establishment Timer Sets the link establishment timer. This parameter has no effect if the LinkEstablishment parameter is set to 'OnDemand'.	Unsigned32r/w Constraints: range: 0-30000	.0.1850.1.500.100.1.10110
signalingChannelAcceptedStatusCauses Accepted STATUS Causes Sets the STATUS causes that can be received without automatically clearing the call. The default action is to clear the call upon the receipt of a STATUS message. If …	OctetStringr/w Constraints: range: 0-255	.0.1850.1.500.100.1.10200
signalingChannelSendIsdnProgress Send ISDN Progress message Sets the strategy for sending ISDN Progress messages. * SendAll: Send an ISDN Progress message in all situations where call progression is signaled. * Sen…	Enumerationr/w Enumerated Values: 100 sendAll 200 sendInband 300 sendAlerting	.0.1850.1.500.100.1.10300
signalingChannelSendProgressIndicatorIE Send ISDN Progress Indicator Information Element Sets the strategy for sending the Progress Indicator Information Element. * SendAll: Send the Progress Indicator IE in all situations. *…	Enumerationr/w Enumerated Values: 100 sendAll 200 sendInbandOnly	.0.1850.1.500.100.1.10400
signalingChannelAocESupport Advice of Charge AOC-E Support Send the total charge at the (E)nd of the call in AOC-E messages. * no: The AOC-E support is disabled. No information is forwarded to the peer interface…	Enumerationr/w Enumerated Values: 100 no 200 transparent 300 automatic 400 explicit	.0.1850.1.500.100.1.10600
signalingChannelAocDSupport Advice of Charge AOC-D Support Send the current charge (D)uring the call in AOC-D messages. * no: The AOC-D support is disabled. No information is forwarded to the peer interface. *…	Enumerationr/w Enumerated Values: 100 no 200 transparent 300 automatic 400 explicit	.0.1850.1.500.100.1.10620
signalingChannelCallReroutingBehavior Call Rerouting Behavior Defines how the call rerouting request received from the private network side is supported. Rerouting requests are received in a Facility IE. * Unsupported: Rerout…	Enumerationr/w Enumerated Values: 100 unsupported 200 relayReroute 300 processLocally	.0.1850.1.500.100.1.10700
signalingChannelDefaultCallingTon Default Type of Number for Calling Party Number IE Default value to insert in the 'Type of Number' parameter of the 'Calling Party Number' IE when 'Type of Number' is not already defined in the call prope…	Enumerationr/w Enumerated Values: 100 unknown 200 international 300 national 400 networkSpecific 500 subscriber 600 abbreviated	.0.1850.1.500.100.1.10800
signalingChannelDefaultCallingNpi Default Numbering Plan Identification for Calling Party Number IE Default value to insert in the 'Numbering Plan Identification' parameter of the 'Calling Party Number' IE when 'Numbering Plan Identificat…	Enumerationr/w Enumerated Values: 100 unknown 200 isdnTelephony 300 data 400 telex 500 nationalStandard 600 private	.0.1850.1.500.100.1.10900
signalingChannelDefaultCallingPi Default Presentation Indicator for Calling Party Number IE Default value to insert in the 'Presentation Indicator' parameter of the 'Calling Party Number' IE when 'Presentation Indicator' is not already d…	Enumerationr/w Enumerated Values: 100 presentationAllowed 200 presentationRestricted 300 notAvailable	.0.1850.1.500.100.1.11000
signalingChannelDefaultCallingSi Default Screening Indicator for Calling Party Number IE Default value to insert in the 'Screening Indicator' parameter of the 'Calling Party Number' IE when 'Screening Indicator' is not already defined in…	Enumerationr/w Enumerated Values: 100 userProvidedNotScreened 200 userProvidedVerifiedAndPassed 300 userProvidedVerifiedAndFailed 400 networkProvided 500 contextDependent	.0.1850.1.500.100.1.11100
signalingChannelDefaultCalledTon Default Type of Number for Called Party Number IE Default value to insert in the 'Type of Number' parameter of the 'Called Party Number' IE when 'Type of Number' is not already defined in the call propert…	Enumerationr/w Enumerated Values: 100 unknown 200 international 300 national 400 networkSpecific 500 subscriber 600 abbreviated	.0.1850.1.500.100.1.11200
signalingChannelDefaultCalledNpi Default Numbering Plan Identification for Called Party Number IE Default value to insert in the 'Numbering Plan Identification' parameter of the 'Called Party Number' IE when 'Numbering Plan Identificatio…	Enumerationr/w Enumerated Values: 100 unknown 200 isdnTelephony 300 data 400 telex 500 nationalStandard 600 private	.0.1850.1.500.100.1.11300
signalingChannelUserSuspendedHandling User Suspended Handling Defines the unit's behaviour when it receives a Notification Indicator IE with the description set to User suspended. Possible values are: * Ignore:…	Enumerationr/w Enumerated Values: 100 ignore 200 disconnect	.0.1850.1.500.100.1.11400
signalingChannelStrictHandlingErrorConditions Strict handling of error conditions When activated, validation of Information Elements is applied to every received messages. Detailed error handling procedures are protocol dependent and m…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.500.100.1.11500
signalingChannelMcidEnable Malicious Call Identification Enable Defines if the Malicious Call Identification (MCID) request sent from the user or network side is supported. Malicious Call Identification (MCID) requests are sent in …	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.500.100.1.11600

Signaling Channel Info
          
ISDN signaling table containing configuration and operational
parameters for all ISDN signaling channels on this managed
device.

signalingChannelInfoEntry row .0.1850.1.500.200.1

A row in table Signaling Channel Info.

Indexes

signalingChannelInfoInterfaceName

Column	Syntax	OID
signalingChannelInfoInterfaceName Interface Name Identifies the interface.	OctetString	.0.1850.1.500.200.1.100
signalingChannelInfoState State The current call control state for this channel: * Up: * Down:	Enumeration Enumerated Values: 100 up 200 down	.0.1850.1.500.200.1.200

Signaling Channel Interop
          
Interop configuration parameters related to the Signaling Channel
on this managed device.

signalingChannelInteropEntry row .0.1850.1.500.50000.100.1

A row in table Signaling Channel Interop.

Indexes

signalingChannelInteropInterfaceName

Column	Syntax	OID
signalingChannelInteropInterfaceName Name Name that identifies the interface.	OctetString	.0.1850.1.500.50000.100.1.100
signalingChannelInteropCallProceedingDelay CallProceeding Delay Defines the maximum time to wait after receiving a SETUP message before sending a CALL PROCEEDING message and going on with normal call processing. After receiving a SE…	Unsigned32r/w Constraints: range: 0-4000	.0.1850.1.500.50000.100.1.200
signalingChannelInteropCallingNameDelivery Calling Name delivery method. Defines how the Calling Name is delivered. * FacilityIe: Use a Facility Information Element for delivering the Calling Name. * DisplayIe: Use a Display…	Enumerationr/w Enumerated Values: 100 facilityIe 200 displayIe 300 userUserIe 400 signalingProtocol	.0.1850.1.500.50000.100.1.300
signalingChannelInteropInteropPlayLocalRingbackWhenNoMediaStream Play Local Ringback when no media stream. Forces local ringback generation when early-media is enabled but no media stream has been received yet. * Enable: The local ringback is played af…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.500.50000.100.1.500
signalingChannelInteropInteropConsecutiveChannelIndicator Consecutive Channel mode for channel indicator To choose which numbering is used in the channel indicator. * Enable: Channel indicator use logical numbering (1-30). * Disable: Channel i…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.500.50000.100.1.600
signalingChannelInteropInteropAddReleaseSecondCauseOnExpiry Add Release Second Cause On Expiry Specifies if an optional second cause information element with cause No. 102 (recovery on timer expiry) should be sent in the Release message with the original Disconnec…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.500.50000.100.1.700

Physical Link Information
          
The ISDN physical link information table contains status
information for all ISDN interfaces on this managed device.

physicalLinkInfoEntry row .0.1850.1.600.100.1

A row in table Physical Link Information.

Indexes

physicalLinkInfoInterfaceName

Column	Syntax	OID
physicalLinkInfoInterfaceName Interface Name Identifies the interface.	OctetString	.0.1850.1.600.100.1.100
physicalLinkInfoState State The layer 1 state for this interface: * Up: Layer 1 connectivity. * Down: No layer 1 connectivity. The interface might be in this state because no cable is plugged in or a pin…	Enumeration Enumerated Values: 100 up 200 down	.0.1850.1.600.100.1.200

Physical Link
          
The ISDN physical link table containing configuration and
operational parameters for all ISDN interfaces on this managed
device.

physicalLinkEntry row .0.1850.1.600.200.1

A row in table Physical Link.

Indexes

physicalLinkInterfaceName

Column	Syntax	OID
physicalLinkInterfaceName Interface Name Identifies the interface.	OctetString	.0.1850.1.600.200.1.100
physicalLinkL1TimerT3 Layer 1 Timer T3 Value Timer 3 (T3) is a supervisory timer that has to take into account the overall time to activate. This time includes the time it takes to activate both the TE-NT and the NT-TE portion…	Unsigned32r/w Constraints: range: 0-30000	.0.1850.1.600.200.1.200
physicalLinkClockMode Clock Mode An ISDN port can either generate the clocking for the line or accept the clock from the line. The options master or slave determine the clocking method: * Auto: Derived from th…	Enumerationr/w Enumerated Values: 100 auto 200 master 300 slave	.0.1850.1.600.200.1.300
physicalLinkMonitorLinkStateEnable Monitor Link State Enable Monitors the physical link state of an ISDN interface. Enable: An ISDN endpoint's operational state is affected by its interface physical link state. When the link…	MX-TCMxEnableStater/w Type Values: 0 disable 1 enable	.0.1850.1.600.200.1.400