signalingChannelMcidEnable
MX-ISDN-MIB ·
.0.1850.1.500.100.1.11600
Object
Malicious Call Identification Enable
Defines if the Malicious Call Identification (MCID) request
sent from the user or network side is supported. Malicious Call
Identification (MCID) requests are sent in a Facility IE.
The MCID request is triggered by the reception of a SIP INFO
message with a proprietary header indicating the malicious
nature of the call.
This parameter only applies to the DSS1 signaling protocol.
* Enable: MCID requests are sent.
* Disable: MCID requests are never sent.
Context
- MIB
- MX-ISDN-MIB
- OID
.0.1850.1.500.100.1.11600- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- signalingChannelEntry
- Table
- signalingChannelTable
- Siblings
- 28
Values & Constraints
Type Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| signalingChannelInterfaceName Interface Name
Identifies the interface. | column | OctetString | .0.1850.1.500.100.1.100 |
| signalingChannelMaintenanceServiceCallTermination Maintenance Service Call Termination
Describes the call termination strategy after reception of a
service message requesting a maintenance on the associated
bearer … | column | Enumeration | .0.1850.1.500.100.1.10000 |
| signalingChannelLinkEstablishment Link Establishment
Sets the link establishment strategy.
* OnDemand: When the data link is shut down, the unit
establishes a new link only when… | column | Enumeration | .0.1850.1.500.100.1.10100 |
| signalingChannelLinkEstablishmentTimer Link Establishment Timer
Sets the link establishment timer.
This parameter has no effect if the LinkEstablishment parameter
is set to 'OnDemand'. | column | Unsigned32 | .0.1850.1.500.100.1.10110 |
| signalingChannelAcceptedStatusCauses Accepted STATUS Causes
Sets the STATUS causes that can be received without
automatically clearing the call.
The default action is to clear the call u… | column | OctetString | .0.1850.1.500.100.1.10200 |
| signalingChannelSendIsdnProgress Send ISDN Progress message
Sets the strategy for sending ISDN Progress messages.
* SendAll: Send an ISDN Progress message in all situations
whe… | column | Enumeration | .0.1850.1.500.100.1.10300 |
| signalingChannelSendProgressIndicatorIE Send ISDN Progress Indicator Information Element
Sets the strategy for sending the Progress Indicator
Information Element.
* SendAll: Send the Prog… | column | Enumeration | .0.1850.1.500.100.1.10400 |
| signalingChannelAocESupport Advice of Charge AOC-E Support
Send the total charge at the (E)nd of the call in AOC-E
messages.
* no: The AOC-E support is disabled. No informatio… | column | Enumeration | .0.1850.1.500.100.1.10600 |
| signalingChannelAocDSupport Advice of Charge AOC-D Support
Send the current charge (D)uring the call in AOC-D messages.
* no: The AOC-D support is disabled. No information is
… | column | Enumeration | .0.1850.1.500.100.1.10620 |
| signalingChannelCallReroutingBehavior Call Rerouting Behavior
Defines how the call rerouting request received from the
private network side is supported. Rerouting requests are
received in a Facility IE… | column | Enumeration | .0.1850.1.500.100.1.10700 |
| signalingChannelDefaultCallingTon Default Type of Number for Calling Party Number IE
Default value to insert in the 'Type of Number' parameter of
the 'Calling Party Number' IE when 'Type of Number' … | column | Enumeration | .0.1850.1.500.100.1.10800 |
| signalingChannelDefaultCallingNpi Default Numbering Plan Identification for Calling Party Number
IE
Default value to insert in the 'Numbering Plan Identification'
parameter of the 'Calling Party Num… | column | Enumeration | .0.1850.1.500.100.1.10900 |
| signalingChannelDefaultCallingPi Default Presentation Indicator for Calling Party Number IE
Default value to insert in the 'Presentation Indicator'
parameter of the 'Calling Party Number' IE when '… | column | Enumeration | .0.1850.1.500.100.1.11000 |
| signalingChannelDefaultCallingSi Default Screening Indicator for Calling Party Number IE
Default value to insert in the 'Screening Indicator' parameter
of the 'Calling Party Number' IE when 'Screen… | column | Enumeration | .0.1850.1.500.100.1.11100 |
| signalingChannelDefaultCalledTon Default Type of Number for Called Party Number IE
Default value to insert in the 'Type of Number' parameter of
the 'Called Party Number' IE when 'Type of Number' is… | column | Enumeration | .0.1850.1.500.100.1.11200 |
| signalingChannelDefaultCalledNpi Default Numbering Plan Identification for Called Party Number
IE
Default value to insert in the 'Numbering Plan Identification'
parameter of the 'Called Party Numbe… | column | Enumeration | .0.1850.1.500.100.1.11300 |
| signalingChannelUserSuspendedHandling User Suspended Handling
Defines the unit's behaviour when it receives a Notification
Indicator IE with the description set to User suspended.
Possibl… | column | Enumeration | .0.1850.1.500.100.1.11400 |
| signalingChannelStrictHandlingErrorConditions Strict handling of error conditions
When activated, validation of Information Elements is applied
to every received messages.
Detailed error handling… | column | MX-TCMxEnableState | .0.1850.1.500.100.1.11500 |
| signalingChannelProtocol Protocol
Defines the protocol to use for the signaling channel:
* DSS1: Digital Subscriber Signaling System No.1
* DMS100: Digital Multiplex Syst… | column | Enumeration | .0.1850.1.500.100.1.200 |
| signalingChannelFacilityServicesEnable Facility Services Enable
Defines whether or not supplementary services FACILITY messages
and FACILITY information elements should be enabled on the ISDN
interface.
… | column | MX-TCMxEnableState | .0.1850.1.500.100.1.250 |
| signalingChannelColpEnable Connected Line Identification Presentation Enable
Defines the Connected Number Information Element at the
originating ISDN side:
* Enable: Sends a … | column | MX-TCMxEnableState | .0.1850.1.500.100.1.300 |
| signalingChannelColrEnable Connected Line Identification Restriction Enable
Defines the Connected Number Information Element restriction at
the destination ISDN side:
* enabl… | column | MX-TCMxEnableState | .0.1850.1.500.100.1.400 |
| signalingChannelColrOverrideEnable Connected Line Identification Restriction Override Enable
Defines the Connected Number Information Element restriction
override at the originating ISDN side:
… | column | MX-TCMxEnableState | .0.1850.1.500.100.1.500 |
| signalingChannelConpEnable Connected Name Identification Presentation Enable
Connected Name identification Presentation (CONP) is a
supplementary service which provides the name of the answer… | column | MX-TCMxEnableState | .0.1850.1.500.100.1.510 |
| signalingChannelOutgoingNotifyEnable Outgoing Notify Enable
Defines if NOTIFY messages can be sent.
* Enable: NOTIFY messages can be sent.
* Disable: NOTIFY messages are never sent.
… | column | MX-TCMxEnableState | .0.1850.1.500.100.1.600 |
| signalingChannelAcceptedProgressCauses Accepted PROGRESS Causes
Sets the range of PROGRESS causes accepted by the unit. Causes
excluded from this range trigger call disconnections.
The str… | column | OctetString | .0.1850.1.500.100.1.700 |
| signalingChannelAutoCancelTimeout Auto Cancel Timeout
Time, in seconds, the endpoint rings before the call is
automatically cancelled.
Setting this parameter to 0 disables the timeout… | column | Unsigned32 | .0.1850.1.500.100.1.800 |
| signalingChannelDateTimeIeSupport Date/Time IE
Defines if the optional Date/Time Information Element (IE) can
be sent into the CONNECT and SETUP messages issued over BRI and
PRI.
* … | column | Enumeration | .0.1850.1.500.100.1.900 |