basicRateInterfaceCallingNameMaxLength
MX-ISDN-MIB ·
.0.1850.1.300.100.1.1400
Object
column
r/w
Unsigned32
Calling Name Maximum Length
Defines the maximum length of the calling party name for calls
from SIP to ISDN on the interface.
Context
- MIB
- MX-ISDN-MIB
- OID
.0.1850.1.300.100.1.1400- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- basicRateInterfaceEntry
- Table
- basicRateInterfaceTable
- Siblings
- 24
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-82
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| basicRateInterfaceName Name
The physical interface name. | column | OctetString | .0.1850.1.300.100.1.100 |
| basicRateInterfaceMaxActiveCalls Maximum Active Calls
Defines the maximum number of active calls on the interface.
Note: The special value 0 indicates no maximum number of active
cal… | column | Unsigned32 | .0.1850.1.300.100.1.1000 |
| basicRateInterfaceSignalInformationElementEnable Signal Information Element Enable
Defines whether the signal information element is enabled on
the interface. When activated at the Network UNI-side (
BasicRateInte… | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1050 |
| basicRateInterfaceInbandToneGenerationEnable Inband Tone Generation Enable
Defines whether inband tone generation is enabled on the
interface. When activated at the User UNI-side (
BasicRateInterfaceEndpointTy… | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1100 |
| basicRateInterfaceInbandDtmfDialingEnable Inband DTMF Dialing Enable
Defines whether inband DTMF dialing is enabled. | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1200 |
| basicRateInterfaceOverlapDialingEnable Overlap Dialing Enable
Defines whether overlap dialing is enabled on the interface. | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1300 |
| basicRateInterfaceExclusiveBChannelSelectionEnable Exclusive Bearer Channel Selection Enable
Defines whether exclusive B-Channel selection is enabled for
calls from SIP to ISDN on the interface. | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1500 |
| basicRateInterfaceSendingCompleteEnable Sending Complete Enable
Defines whether the Sending Complete information element in
SETUP messages is enabled for calls from SIP to ISDN on the
interface. | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1600 |
| basicRateInterfaceClipEnable Calling Line Information Presentation Enable
Enables the CLIP service, which is offered to the called party
to see the calling party's ISDN number. CLIP is compleme… | column | Enumeration | .0.1850.1.300.100.1.1700 |
| basicRateInterfaceClirEnable Calling Line Information Restriction Enable
Enables the CLIR service, which is offered to the calling party
to restrict presentation of the calling party's ISDN num… | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1725 |
| basicRateInterfaceClirOverrideEnable Calling Line Information Restriction Override Enable
Enables the CLIR override option. This option allows the
calling party number to be presented to the destinatio… | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1750 |
| basicRateInterfaceSendRestartOnStartupEnable Send Restart On Startup Enable
Defines whether the RESTART message is sent upon a signaling
channel 'UP' event | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1800 |
| basicRateInterfaceHookFlashKeypad Hook-Flash Keypad
The actual keypad string that is to be considered as a
hook-flash.
Setting this parameter to an empty string disables the
hook-flas… | column | OctetString | .0.1850.1.300.100.1.1900 |
| basicRateInterfaceEndpointType Endpoint Type
Defines the endpoint type:
* Te: Terminal Equipment
* Nt: Network Termination
When the SignalingChannel.Protocol par… | column | Enumeration | .0.1850.1.300.100.1.200 |
| basicRateInterfaceKeypadReceptionTimeout Keypad Reception Timeout
The actual time to wait before considering the keypad reception
over.
The value is expressed in seconds.
Sett… | column | Unsigned32 | .0.1850.1.300.100.1.2000 |
| basicRateInterfaceMsn MSN
This enables the MSN supplementary service with a comma
separated list of numbers.
The MSN supplementary service shall enable each individual
ter… | column | OctetString | .0.1850.1.300.100.1.2200 |
| basicRateInterfaceMsn2 deprecated MSN 2
Deprecated: Use Isdn.BasicRateInterface.Msn instead. This
enables the MSN supplementary service with these numbers.
The MSN supplementary servi… | column | OctetString | .0.1850.1.300.100.1.2300 |
| basicRateInterfaceMsn3 deprecated MSN 3
Deprecated: Use Isdn.BasicRateInterface.Msn instead. This
enables the MSN supplementary service with these numbers.
The MSN supplementary servi… | column | OctetString | .0.1850.1.300.100.1.2400 |
| basicRateInterfaceTeiNegotiation TEI Negotiation
Sets the Terminal Endpoint Identifier (TEI) negotiation
strategy.
* LinkUp: Each time the physical link comes up, the unit
rene… | column | Enumeration | .0.1850.1.300.100.1.2500 |
| basicRateInterfaceConnectionType Connection Type
Defines the connection type:
* PointToPoint: Can only attach one device (for instance a
PABX or PSTN)
* PointToMultiPoint: Ca… | column | Enumeration | .0.1850.1.300.100.1.300 |
| basicRateInterfaceNetworkLocation Network Location
Defines the value of the network location in the progress
indicator messages sent by the unit. | column | Enumeration | .0.1850.1.300.100.1.600 |
| basicRateInterfacePreferredEncodingScheme Preferred Encoding Scheme
Defines the preferred data encoding scheme in the bearer
capabilities (user information layer 1 protocol). This encoding
scheme is used wh… | column | Enumeration | .0.1850.1.300.100.1.700 |
| basicRateInterfaceFallbackEncodingScheme Fallback Encoding Scheme
Defines the fallback data encoding scheme in the bearer
capabilities (user information layer 1 protocol). | column | Enumeration | .0.1850.1.300.100.1.750 |
| basicRateInterfaceChannelAllocationStrategy Channel Allocation Strategy
Defines the strategy for selecting bearer channels. Available
strategies are:
* Ascending: select the lowest-numbered n… | column | Enumeration | .0.1850.1.300.100.1.900 |