basicRateInterfaceEntry

MX-ISDN-MIB · .0.1850.1.300.100.1

Object

row

A row in table Basic Rate Interface.

Context

MIB: MX-ISDN-MIB
OID: .0.1850.1.300.100.1
Type: row
Status: current
Parent: basicRateInterfaceTable
Table: basicRateInterfaceTable
Children: 25

Syntax

No syntax metadata recorded.

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Child Objects

Object	Type	Syntax	OID
basicRateInterfaceName Name The physical interface name.	column	OctetString	`.0.1850.1.300.100.1.100`
basicRateInterfaceMaxActiveCalls Maximum Active Calls Defines the maximum number of active calls on the interface. Note: The special value 0 indicates no maximum number of active cal…	column	Unsigned32	`.0.1850.1.300.100.1.1000`
basicRateInterfaceSignalInformationElementEnable Signal Information Element Enable Defines whether the signal information element is enabled on the interface. When activated at the Network UNI-side ( BasicRateInte…	column	MX-TCMxEnableState	`.0.1850.1.300.100.1.1050`
basicRateInterfaceInbandToneGenerationEnable Inband Tone Generation Enable Defines whether inband tone generation is enabled on the interface. When activated at the User UNI-side ( BasicRateInterfaceEndpointTy…	column	MX-TCMxEnableState	`.0.1850.1.300.100.1.1100`
basicRateInterfaceInbandDtmfDialingEnable Inband DTMF Dialing Enable Defines whether inband DTMF dialing is enabled.	column	MX-TCMxEnableState	`.0.1850.1.300.100.1.1200`
basicRateInterfaceOverlapDialingEnable Overlap Dialing Enable Defines whether overlap dialing is enabled on the interface.	column	MX-TCMxEnableState	`.0.1850.1.300.100.1.1300`
basicRateInterfaceCallingNameMaxLength Calling Name Maximum Length Defines the maximum length of the calling party name for calls from SIP to ISDN on the interface.	column	Unsigned32	`.0.1850.1.300.100.1.1400`
basicRateInterfaceExclusiveBChannelSelectionEnable Exclusive Bearer Channel Selection Enable Defines whether exclusive B-Channel selection is enabled for calls from SIP to ISDN on the interface.	column	MX-TCMxEnableState	`.0.1850.1.300.100.1.1500`
basicRateInterfaceSendingCompleteEnable Sending Complete Enable Defines whether the Sending Complete information element in SETUP messages is enabled for calls from SIP to ISDN on the interface.	column	MX-TCMxEnableState	`.0.1850.1.300.100.1.1600`
basicRateInterfaceClipEnable Calling Line Information Presentation Enable Enables the CLIP service, which is offered to the called party to see the calling party's ISDN number. CLIP is compleme…	column	Enumeration	`.0.1850.1.300.100.1.1700`
basicRateInterfaceClirEnable Calling Line Information Restriction Enable Enables the CLIR service, which is offered to the calling party to restrict presentation of the calling party's ISDN num…	column	MX-TCMxEnableState	`.0.1850.1.300.100.1.1725`
basicRateInterfaceClirOverrideEnable Calling Line Information Restriction Override Enable Enables the CLIR override option. This option allows the calling party number to be presented to the destinatio…	column	MX-TCMxEnableState	`.0.1850.1.300.100.1.1750`
basicRateInterfaceSendRestartOnStartupEnable Send Restart On Startup Enable Defines whether the RESTART message is sent upon a signaling channel 'UP' event	column	MX-TCMxEnableState	`.0.1850.1.300.100.1.1800`
basicRateInterfaceHookFlashKeypad Hook-Flash Keypad The actual keypad string that is to be considered as a hook-flash. Setting this parameter to an empty string disables the hook-flas…	column	OctetString	`.0.1850.1.300.100.1.1900`
basicRateInterfaceEndpointType Endpoint Type Defines the endpoint type: * Te: Terminal Equipment * Nt: Network Termination When the SignalingChannel.Protocol par…	column	Enumeration	`.0.1850.1.300.100.1.200`
basicRateInterfaceKeypadReceptionTimeout Keypad Reception Timeout The actual time to wait before considering the keypad reception over. The value is expressed in seconds. Sett…	column	Unsigned32	`.0.1850.1.300.100.1.2000`
basicRateInterfaceMsn MSN This enables the MSN supplementary service with a comma separated list of numbers. The MSN supplementary service shall enable each individual ter…	column	OctetString	`.0.1850.1.300.100.1.2200`
basicRateInterfaceMsn2 deprecated MSN 2 Deprecated: Use Isdn.BasicRateInterface.Msn instead. This enables the MSN supplementary service with these numbers. The MSN supplementary servi…	column	OctetString	`.0.1850.1.300.100.1.2300`
basicRateInterfaceMsn3 deprecated MSN 3 Deprecated: Use Isdn.BasicRateInterface.Msn instead. This enables the MSN supplementary service with these numbers. The MSN supplementary servi…	column	OctetString	`.0.1850.1.300.100.1.2400`
basicRateInterfaceTeiNegotiation TEI Negotiation Sets the Terminal Endpoint Identifier (TEI) negotiation strategy. * LinkUp: Each time the physical link comes up, the unit rene…	column	Enumeration	`.0.1850.1.300.100.1.2500`
basicRateInterfaceConnectionType Connection Type Defines the connection type: * PointToPoint: Can only attach one device (for instance a PABX or PSTN) * PointToMultiPoint: Ca…	column	Enumeration	`.0.1850.1.300.100.1.300`
basicRateInterfaceNetworkLocation Network Location Defines the value of the network location in the progress indicator messages sent by the unit.	column	Enumeration	`.0.1850.1.300.100.1.600`
basicRateInterfacePreferredEncodingScheme Preferred Encoding Scheme Defines the preferred data encoding scheme in the bearer capabilities (user information layer 1 protocol). This encoding scheme is used wh…	column	Enumeration	`.0.1850.1.300.100.1.700`
basicRateInterfaceFallbackEncodingScheme Fallback Encoding Scheme Defines the fallback data encoding scheme in the bearer capabilities (user information layer 1 protocol).	column	Enumeration	`.0.1850.1.300.100.1.750`
basicRateInterfaceChannelAllocationStrategy Channel Allocation Strategy Defines the strategy for selecting bearer channels. Available strategies are: * Ascending: select the lowest-numbered n…	column	Enumeration	`.0.1850.1.300.100.1.900`

Indexes