basicRateInterfaceInteropUseImplicitInbandInfoEnable
MX-ISDN-MIB ·
.0.1850.1.300.50000.100.1.800
Object
Use Implicit Inband Information
This parameter defines how to interpret an incoming ISDN
response message with a Progress Indicator information element
No. 1 (the call is not end-to-end ISDN; further call progress
information may be available in-band).
This parameter is only applied for outgoing ISDN calls. For
incoming ISDN call, it is inapplicable.
* Disable: The Inband information towards the SIP gateway is
always locally generated, regardless if Inband information
is received on the ISDN call.
* Enable: The Inband information towards the SIP gateway is
always provided by the called ISDN peer and the NT side
shall activate the B-channel connection with Inband
information.
Context
- MIB
- MX-ISDN-MIB
- OID
.0.1850.1.300.50000.100.1.800- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- basicRateInterfaceInteropEntry
- Table
- basicRateInterfaceInteropTable
- Siblings
- 9
Values & Constraints
Type Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| basicRateInterfaceInteropName Name
Name that identifies the interface. | column | OctetString | .0.1850.1.300.50000.100.1.100 |
| basicRateInterfaceInteropProgressIndicatorInSetupEnable Progress Indicator In Setup
Defines whether or not the Progress Indicator information
element is allowed in the SETUP message when acting as the
originating side.
… | column | MX-TCMxEnableState | .0.1850.1.300.50000.100.1.200 |
| basicRateInterfaceInteropProgressIndicatorInSetupAckEnable Progress Indicator In Setup Ack
Defines whether or not the Progress Indicator information
element is allowed in the SETUP ACK when acting as the
terminating side.
… | column | MX-TCMxEnableState | .0.1850.1.300.50000.100.1.300 |
| basicRateInterfaceInteropProgressIndicatorInCallProgressForSetupEnable Progress Indicator In Call Progress For Setup
Defines whether or not the Progress Indicator information
element is allowed in the CALL PROCEEDING message in respons… | column | MX-TCMxEnableState | .0.1850.1.300.50000.100.1.400 |
| basicRateInterfaceInteropProgressIndicatorInProgressEnable Progress Indicator In Progress
Defines whether or not the Progress Indicator information
element is allowed in the PROGRESS message in response to a
SETUP message w… | column | MX-TCMxEnableState | .0.1850.1.300.50000.100.1.450 |
| basicRateInterfaceInteropProgressIndicatorInAlertingEnable Progress Indicator In Alerting
Defines whether or not the Progress Indicator information
element is allowed in the ALERTING message.
See the Signalin… | column | MX-TCMxEnableState | .0.1850.1.300.50000.100.1.500 |
| basicRateInterfaceInteropProgressIndicatorInConnectEnable Progress Indicator In Connect
Defines whether or not the Progress Indicator information
element is allowed in the CONNECT message.
See the SignalingC… | column | MX-TCMxEnableState | .0.1850.1.300.50000.100.1.600 |
| basicRateInterfaceInteropMaximumFacilityWaitingDelay Maximum FACILITY Waiting Delay
Defines the maximum amount of time to wait for a FACILITY
message, after receiving a SETUP message, before going on with
normal call … | column | Unsigned32 | .0.1850.1.300.50000.100.1.700 |
| basicRateInterfaceInteropAllowTeiBroadcastInPtpEnable Allow TEI Broadcast in Point-to-Point
Defines whether or not an ISDN message with a TEI broadcast
needs to be interpreted as a TEI 0 when the connection type is
'Po… | column | MX-TCMxEnableState | .0.1850.1.300.50000.100.1.900 |