basicRateInterfaceClipEnable
MX-ISDN-MIB ·
.0.1850.1.300.100.1.1700
Object
column
r/w
Enumeration
Calling Line Information Presentation Enable
Enables the CLIP service, which is offered to the called party
to see the calling party's ISDN number. CLIP is complemented by
privacy rules controlled by the ClirEnable and
ClirOverrideEnable parameters. The ClipEnable parameter has the
following effect:
* UserOnly: Sends a Calling Number IE which contains the
calling number digits when acting as the User UNI-side (
PrimaryRateInterfaceEndpointType parameter set to Te)
otherwise the Calling Number IE is not sent.
* Enable: Sends a Calling Number IE which contains the
calling number digits.
* Disable: The Calling Number IE is never sent.
Context
- MIB
- MX-ISDN-MIB
- OID
.0.1850.1.300.100.1.1700- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- basicRateInterfaceEntry
- Table
- basicRateInterfaceTable
- Siblings
- 24
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | userOnly |
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| basicRateInterfaceName Name
The physical interface name. | column | OctetString | .0.1850.1.300.100.1.100 |
| basicRateInterfaceMaxActiveCalls Maximum Active Calls
Defines the maximum number of active calls on the interface.
Note: The special value 0 indicates no maximum number of active
cal… | column | Unsigned32 | .0.1850.1.300.100.1.1000 |
| basicRateInterfaceSignalInformationElementEnable Signal Information Element Enable
Defines whether the signal information element is enabled on
the interface. When activated at the Network UNI-side (
BasicRateInte… | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1050 |
| basicRateInterfaceInbandToneGenerationEnable Inband Tone Generation Enable
Defines whether inband tone generation is enabled on the
interface. When activated at the User UNI-side (
BasicRateInterfaceEndpointTy… | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1100 |
| basicRateInterfaceInbandDtmfDialingEnable Inband DTMF Dialing Enable
Defines whether inband DTMF dialing is enabled. | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1200 |
| basicRateInterfaceOverlapDialingEnable Overlap Dialing Enable
Defines whether overlap dialing is enabled on the interface. | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1300 |
| basicRateInterfaceCallingNameMaxLength Calling Name Maximum Length
Defines the maximum length of the calling party name for calls
from SIP to ISDN on the interface. | column | Unsigned32 | .0.1850.1.300.100.1.1400 |
| basicRateInterfaceExclusiveBChannelSelectionEnable Exclusive Bearer Channel Selection Enable
Defines whether exclusive B-Channel selection is enabled for
calls from SIP to ISDN on the interface. | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1500 |
| basicRateInterfaceSendingCompleteEnable Sending Complete Enable
Defines whether the Sending Complete information element in
SETUP messages is enabled for calls from SIP to ISDN on the
interface. | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1600 |
| basicRateInterfaceClirEnable Calling Line Information Restriction Enable
Enables the CLIR service, which is offered to the calling party
to restrict presentation of the calling party's ISDN num… | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1725 |
| basicRateInterfaceClirOverrideEnable Calling Line Information Restriction Override Enable
Enables the CLIR override option. This option allows the
calling party number to be presented to the destinatio… | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1750 |
| basicRateInterfaceSendRestartOnStartupEnable Send Restart On Startup Enable
Defines whether the RESTART message is sent upon a signaling
channel 'UP' event | column | MX-TCMxEnableState | .0.1850.1.300.100.1.1800 |
| basicRateInterfaceHookFlashKeypad Hook-Flash Keypad
The actual keypad string that is to be considered as a
hook-flash.
Setting this parameter to an empty string disables the
hook-flas… | column | OctetString | .0.1850.1.300.100.1.1900 |
| basicRateInterfaceEndpointType Endpoint Type
Defines the endpoint type:
* Te: Terminal Equipment
* Nt: Network Termination
When the SignalingChannel.Protocol par… | column | Enumeration | .0.1850.1.300.100.1.200 |
| basicRateInterfaceKeypadReceptionTimeout Keypad Reception Timeout
The actual time to wait before considering the keypad reception
over.
The value is expressed in seconds.
Sett… | column | Unsigned32 | .0.1850.1.300.100.1.2000 |
| basicRateInterfaceMsn MSN
This enables the MSN supplementary service with a comma
separated list of numbers.
The MSN supplementary service shall enable each individual
ter… | column | OctetString | .0.1850.1.300.100.1.2200 |
| basicRateInterfaceMsn2 deprecated MSN 2
Deprecated: Use Isdn.BasicRateInterface.Msn instead. This
enables the MSN supplementary service with these numbers.
The MSN supplementary servi… | column | OctetString | .0.1850.1.300.100.1.2300 |
| basicRateInterfaceMsn3 deprecated MSN 3
Deprecated: Use Isdn.BasicRateInterface.Msn instead. This
enables the MSN supplementary service with these numbers.
The MSN supplementary servi… | column | OctetString | .0.1850.1.300.100.1.2400 |
| basicRateInterfaceTeiNegotiation TEI Negotiation
Sets the Terminal Endpoint Identifier (TEI) negotiation
strategy.
* LinkUp: Each time the physical link comes up, the unit
rene… | column | Enumeration | .0.1850.1.300.100.1.2500 |
| basicRateInterfaceConnectionType Connection Type
Defines the connection type:
* PointToPoint: Can only attach one device (for instance a
PABX or PSTN)
* PointToMultiPoint: Ca… | column | Enumeration | .0.1850.1.300.100.1.300 |
| basicRateInterfaceNetworkLocation Network Location
Defines the value of the network location in the progress
indicator messages sent by the unit. | column | Enumeration | .0.1850.1.300.100.1.600 |
| basicRateInterfacePreferredEncodingScheme Preferred Encoding Scheme
Defines the preferred data encoding scheme in the bearer
capabilities (user information layer 1 protocol). This encoding
scheme is used wh… | column | Enumeration | .0.1850.1.300.100.1.700 |
| basicRateInterfaceFallbackEncodingScheme Fallback Encoding Scheme
Defines the fallback data encoding scheme in the bearer
capabilities (user information layer 1 protocol). | column | Enumeration | .0.1850.1.300.100.1.750 |
| basicRateInterfaceChannelAllocationStrategy Channel Allocation Strategy
Defines the strategy for selecting bearer channels. Available
strategies are:
* Ascending: select the lowest-numbered n… | column | Enumeration | .0.1850.1.300.100.1.900 |