primaryRateInterfaceChannelRange
MX-ISDN-MIB ·
.0.1850.1.200.100.1.800
Object
column
r/w
OctetString
Channel Range
Defines the range of active bearer channels.
Context
- MIB
- MX-ISDN-MIB
- OID
.0.1850.1.200.100.1.800- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- primaryRateInterfaceEntry
- Table
- primaryRateInterfaceTable
- Siblings
- 23
Syntax
OctetString
Values & Constraints
Object Constraints
range: 1-10
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| primaryRateInterfaceName Name
Name that identifies the interface. | column | OctetString | .0.1850.1.200.100.1.100 |
| primaryRateInterfaceMaxActiveCalls Maximum Active Calls
Defines the maximum number of active calls on the interface.
Note: The special value 0 indicates no maximum number of active
cal… | column | Unsigned32 | .0.1850.1.200.100.1.1000 |
| primaryRateInterfaceSignalInformationElementEnable Signal Information Element Enable
Defines whether the signal information element is enabled on
the interface. When activated at the Network UNI-side (
PrimaryRateIn… | column | MX-TCMxEnableState | .0.1850.1.200.100.1.1050 |
| primaryRateInterfaceInbandToneGenerationEnable Inband Tone Generation Enable
Defines whether inband tone generation is enabled on the
interface.
When activated at the User UNI-side (
PrimaryRateIn… | column | MX-TCMxEnableState | .0.1850.1.200.100.1.1100 |
| primaryRateInterfaceInbandDtmfDialingEnable Inband DTMF Dialing Enable
Defines whether inband DTMF dialing is enabled. | column | MX-TCMxEnableState | .0.1850.1.200.100.1.1200 |
| primaryRateInterfaceOverlapDialingEnable Overlap Dialing Enable
Defines whether overlap dialing is enabled on the interface. | column | MX-TCMxEnableState | .0.1850.1.200.100.1.1300 |
| primaryRateInterfaceCallingNameMaxLength Calling Name Maximum Length
Defines the maximum length of the calling party name for calls
from SIP to ISDN on the interface. | column | Unsigned32 | .0.1850.1.200.100.1.1400 |
| primaryRateInterfaceExclusiveBChannelSelectionEnable Exclusive Bearer Channel Selection Enable
Defines whether exclusive B-Channel selection is enabled for
calls from SIP to ISDN on the interface. | column | MX-TCMxEnableState | .0.1850.1.200.100.1.1500 |
| primaryRateInterfaceSendingCompleteEnable Sending Complete Enable
Defines whether the Sending Complete information element in
SETUP messages is enabled for calls from SIP to ISDN on the
interface. | column | MX-TCMxEnableState | .0.1850.1.200.100.1.1600 |
| primaryRateInterfaceClipEnable Calling Line Information Presentation Enable
Enables the CLIP service, which is offered to the called party
to see the calling party's ISDN number. CLIP is compleme… | column | Enumeration | .0.1850.1.200.100.1.1700 |
| primaryRateInterfaceClirEnable Calling Line Information Restriction Enable
Enables the CLIR service, which is offered to the calling party
to restrict presentation of the calling party's ISDN num… | column | MX-TCMxEnableState | .0.1850.1.200.100.1.1725 |
| primaryRateInterfaceClirOverrideEnable Calling Line Information Restriction Override Enable
Enables the CLIR override option. This option allows the
calling party number to be presented to the destinatio… | column | MX-TCMxEnableState | .0.1850.1.200.100.1.1750 |
| primaryRateInterfaceSendRestartOnStartupEnable Send Restart On Startup Enable
Defines whether the RESTART message is sent upon a signaling
channel 'UP' event | column | MX-TCMxEnableState | .0.1850.1.200.100.1.1800 |
| primaryRateInterfaceEndpointType Endpoint Type
Defines the endpoint type:
* Te: Terminal Equipment
* Nt: Network Termination
When the SignalingChannel.Protocol par… | column | Enumeration | .0.1850.1.200.100.1.200 |
| primaryRateInterfacePortPinout Port Pinout
Defines the port pinout:
* Auto: The pinout is set according to the endpoint type.
* Te: Force the pinout to TE regardless of the end… | column | Enumeration | .0.1850.1.200.100.1.250 |
| primaryRateInterfaceLineCoding Line Coding
Defines the transmission encoding of bits:
* B8ZS: Bipolar with 8-Zeros Substitution (T1 lines)
* HDB3: High-Density Bipolar with 3-z… | column | Enumeration | .0.1850.1.200.100.1.400 |
| primaryRateInterfaceLineFraming Line Framing
Defines the frame format:
* SF: Super frame. Sometimes known as D4 (T1 lines)
* ESF: Extended super frame (T1 lines)
* CRC4: Cycli… | column | Enumeration | .0.1850.1.200.100.1.500 |
| primaryRateInterfaceNetworkLocation Network Location
Defines the value of the network location in the progress
indicator messages sent by the unit. | column | Enumeration | .0.1850.1.200.100.1.600 |
| primaryRateInterfacePreferredEncodingScheme Preferred Encoding Scheme
Defines the preferred data encoding scheme in the bearer
capabilities (user information layer 1 protocol). This encoding
scheme is used wh… | column | Enumeration | .0.1850.1.200.100.1.700 |
| primaryRateInterfaceFallbackEncodingScheme Fallback Encoding Scheme
Defines the fallback data encoding scheme in the bearer
capabilities (user information layer 1 protocol). | column | Enumeration | .0.1850.1.200.100.1.750 |
| primaryRateInterfaceIncomingChannelRange Channel Range Reserved for Incoming Calls
Bearer channels are by default usable for both incoming and
outgoing calls. Use this range to reserve channels for incomin… | column | OctetString | .0.1850.1.200.100.1.830 |
| primaryRateInterfaceOutgoingChannelRange Channel Range Reserved for Outgoing Calls
Bearer channels are by default usable for both incoming and
outgoing calls. Use this range to reserve channels for outgoin… | column | OctetString | .0.1850.1.200.100.1.860 |
| primaryRateInterfaceChannelAllocationStrategy Channel Allocation Strategy
Defines the strategy for selecting bearer channels. Available
strategies are:
* Ascending: select the lowest-numbered n… | column | Enumeration | .0.1850.1.200.100.1.900 |