CISCO-ITP-MLR-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
8
Rows
8
Columns
154

cmlrInstTable

table
.1.3.6.1.4.1.9.9.396.1.1 · 1 row entry · 33 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmlrInstTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ITP-MLR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ITP-MLR-MIB::cmlrInstTable' 
A table that is used to provide information and measurements
related to multi-layer routing per per signalling point.
cmlrInstTableEntry row .1.3.6.1.4.1.9.9.396.1.1.1
Each entry in this table provides information on each
signalling pointer supported by this device. Each
entry provides information on modification to the
configuration statements related to multi-layer
routing and gen…
Indexes
Column Syntax OID
cmlrInstLastChanged
The value of sysUpTime at the time of the last
creation or deletion of an entry in the Multi-Layer
routing table defined for this signalling point.
If the local network management subsystem is
re-initialized, then this…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.396.1.1.1.1
cmlrInstLastLoadTime
The value of sysUpTime at the time of the last
load of the Multi-Layer Routing table using file
format for this signalling point.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.396.1.1.1.2
cmlrInstLoadStatus
The status of the current load or status from
the prior load operation. This object will have
a value of loadInProgress while the load operation
is in progress. The cmlrInstLastLoadTime contains
a timestamp indicating…
CISCO-ITP-TC-MIBCItpTcTableLoadStatus
Type Values:
1loadNotRequested
2loadInProgress
3loadComplete
4loadCompleteWithErrors
5loadFailed
 .1.3.6.1.4.1.9.9.396.1.1.1.3
cmlrInstLastURL
The last URL used to load MLR table.
CISCO-ITP-TC-MIBCItpTcURL
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.1.1.4
cmlrInstRoutedCounts
Count of the number of times a packet was routed by
MLR. This value is incremented when packet is routed
with result type of 'asname', 'gt', 'pc' or 'pcSsn'.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.5
cmlrInstAbortCounts
Count of message signal units that could not be processed
because of invalid data or were explicitly blocked as a
result of MLR processing. The message signalling units
will be discarded.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.6
cmlrInstContinueCounts
Count of message signal units that were passed back to
normal SCCP processing.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.7
cmlrInstSmsMoCounts
Count of message signal units with operation type
GSM-MAP SMS-MO.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.8
cmlrInstSmsMtCounts
Count of message signal units with operation type
GSM-MAP SMS-MT.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.9
cmlrInstSriSmCounts
Count of message signal units with operation type
GSM-MAP SRI-SM.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.10
cmlrInstSmdPpCounts
Count of message signal units with operation type
ANSI-41 SMD-PP.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.11
cmlrInstAlertScCounts
Count of message signal units with operation type
GSM-MAP AlertSC.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.12
cmlrInstSmsRequestCounts
Count of message signal units with operation type
ANSI-41 SMSRequest.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.13
cmlrInstSmsNotifCounts
Count of message signal units with operation type
ANSI-41 SMSNotification.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.14
cmlrInstUnsupSCCPmsgTypeCounts
Count of message signal units received with unsupported
SCCP message type. This object counts are also included
in the cmlrInstContinueCounts object.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.15
cmlrInstUnsupSegSCCPmsgCounts
Count of message signal units received with unsupported
segmented SCCP message. This object counts are also
included in the cmlrInstContinueCounts object.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.16
cmlrInstUnsupportedMsgCounts
Count of message signal units received that could not be
processed because the messages contained an unsupported
command type or contents of messages was unsupported.
This object counts are also included in the
cmlrIn…
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.17
cmlrInstParsingErrorCounts
Count of message signal units received that could not be
processed because of a parsing error. This object counts
are also included in the cmlrInstContinueCounts object.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.18
cmlrInstNoResultCounts
Count of message signal units received that matched a
trigger or rule that did not specify a result. This object
counts are also included in the
cmlrInstContinueCounts object.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.19
cmlrInstResultContinueCounts
Count of message signal units received that matched a
trigger or rule that specified continue for the result.
This object counts are also included in the
cmlrInstContinueCounts object.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.20
cmlrInstNoServerDiscardCounts
Count of message signal units received that matched a
trigger or rule that specified a result or result group
directing MSU to application server. However, the
application server was unavailable. This object counts
a…
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.21
cmlrInstResultGttCounts
Count of message signal units received that matched a
trigger or rule that specified GTT for the result. This
object counts are also included in the
cmlrInstContinueCounts object.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.22
cmlrInstUnparsedCounts
Count of message signal units received that could not be
parsed due to some type of resource shortage. This object
counts are also included in the cmlrInstAbortCounts object.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.23
cmlrInstResultBlockCounts
Count of message signal units received that matched a
trigger or rule that specified a result of block. This
object counts are also included in the cmlrInstAbortCounts
object.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.24
cmlrInstGTImismatchCounts
Count of message signal units received that could not
be routed because of mis-match between GTI values.
This object counts are also included in the
cmlrInstAbortCounts object.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.25
cmlrInstAddrConvFailureCounts
Count of message signal units received that could not
be routed because GTT address failed to convert. This
object counts are also included in the
cmlrInstAbortCounts object.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.26
cmlrInstDestUnavailableCounts
Count of message signal units received that specified
a result PC or PC and SSN and the destination point-code
was unavailable. This object counts are also included
in the cmlrInstAbortCounts object.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.27
cmlrInstFailedTrigMatchCounts
Count of message signal units received that was
processed and failed to mathc any trigger. This can
occur when a primary trigger specifies secondary triggers
and they fail to match. This object counts are also
included …
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.28
cmlrInstDiscontinuityTime
The value of sysUpTime on the most recent occasion at
which the configuration was modified in such a way
to force a discontinuity. All counters under this
instance in the following tables will be reset when
configurat…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.396.1.1.1.29
cmlrInstNoServerContinueCounts
Count of message signal units received that matched a
trigger or rule that specified a result or result group
directing MSU to application server. However, the
application server was unavailable. This object counts
a…
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.30
cmlrInstResultAsCounts
Count of message signal units received that matched a
trigger or rule that specified result type of Application
server. This object counts are also included in the
cmlrInstRoutedCounts object.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.31
cmlrInstResultPcCounts
Count of message signal units received that matched a
trigger or rule that specified result type Pointcode.
This object counts are also included in the
cmlrInstRoutedCounts object.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.32
cmlrInstResultPcSsnCounts
Count of message signal units received that matched a
trigger or rule that specified pointcode and subsystem
number. This object counts are also included in the
cmlrInstRoutedCounts object.
packetsSNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.1.1.33

cmlrTriggerTable

table
.1.3.6.1.4.1.9.9.396.1.2 · 1 row entry · 22 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmlrTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ITP-MLR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ITP-MLR-MIB::cmlrTriggerTable' 
A table that is used to configure specific routing keys
to act as trigger for multi-layer routing.  Entries are
added to this table via cmlrTriggerRowStatus in 
accordance with the RowStatus convention.
cmlrTriggerTableEntry row .1.3.6.1.4.1.9.9.396.1.2.1
Each entry define a trigger to be used to perform
non-standard routing of message signalling units. Each
trigger entry contains information used to select traffic
for further processing. Therefore, the information use…
Indexes
Column Syntax OID
cmlrTableName
A name used to define a collection of multi-layer
routing statements.
CmlrName
Type Constraints:
range: 0..20
Description:
The configured name used to identify various
tables used by MLR.

An octet string specified by an administrator that
must be in human-readable form. The names must
conform to the allowed characters that can b…
 .1.3.6.1.4.1.9.9.396.1.2.1.1
cmlrTriggerNumber
This object specifies the index for a list of triggers
specified per routing table.
CmlrId
Type Constraints:
range: 0..65535
Description:
A numeric identifier used to specify an entry in a list.
Zero is a special value used to indicate no entry.
 .1.3.6.1.4.1.9.9.396.1.2.1.2
cmlrTriggerParameters
The following options define the source and
processing of triggers.

'block' : Indicates that message signal units will be
dropped when they match the specified trigger.
…
Bitsr/w
Enumerated Values:
0block
1continue
2matchAll
3cdpa
4cgpa
5pc
6gt
7tt
8gti
9np
10nai
11ssn
12pid
13network
14ruleset
15dpc
16opc
17opcMask
18si
 .1.3.6.1.4.1.9.9.396.1.2.1.3
cmlrTriggerGt
The global title address to be matched when either the
'cdpa' or 'cgpa' bits are set in the cmlrTriggerParameters
object. This object will return a string of zero length
when the cmlrTriggerParameters 'pc' bit is set.
CISCO-ITP-TC-MIBCItpTcGtaLongDisplayr/w
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.9.9.396.1.2.1.4
cmlrTriggerTransType
The translation type specified within the address in the
message signal unit. This object will default to value
based on variant unless the 'tt' bit is set in
cmlrTriggerParameters object.
CISCO-ITP-GSCCP-MIBCgsccpGttTransTyper/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.2.1.5
cmlrTriggerGti
The global title indicator value for the global tile address
specified within the message signal unit. This object will
default to value based on variant unless the 'gti' bit is
set in cmlrTriggerParameters object.
CISCO-ITP-GSCCP-MIBCgsccpGttGlobalTitleIndr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.2.1.6
cmlrTriggerNp
The numbering plan of the specified global title address.
This object will default to value based on variant unless
the 'np' bit is set in cmlrTriggerParameters object.
CISCO-ITP-TC-MIBCItpTcNumberingPlanr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.2.1.7
cmlrTriggerNai
Nature of Address Indicator (NAI) for GTT Selector. This
object will default to value based on variant unless the
'nai' bit is set in cmlrTriggerParameters object.
CISCO-ITP-TC-MIBCItpTcNAIr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.2.1.8
cmlrTriggerPc
The point-code in variant-specific format. This
object only has meaning when the 'pc' bit is
set in the cmlrTriggerParameters object.
CISCO-ITP-TC-MIBCItpTcPointCoder/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.396.1.2.1.9
cmlrTriggerSsn
The subsystem number to be matched when the when the 'pc'
bit is set in the cmlrTriggerParameters object.
CISCO-ITP-TC-MIBCItpTcSubSystemNumberr/w
Type Constraints:
range: 0
range: 2..255
 .1.3.6.1.4.1.9.9.396.1.2.1.10
cmlrTriggerDpc
The destination MTP3 point-code to be matched when the when
the 'dpc' bit is set in the cmlrTriggerParameters object.
CISCO-ITP-TC-MIBCItpTcPointCoder/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.396.1.2.1.11
cmlrTriggerOpc
The origination MTP3 point-code to be matched when the when
the 'opc' bit is set in the cmlrTriggerParameters object.
CISCO-ITP-TC-MIBCItpTcPointCoder/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.396.1.2.1.12
cmlrTriggerOpcMask
The origination MTP3 point-code mask to be applied in
combination with cmlrTriggerOpc object. The mask will
be applied when 'opcMask' bit is set in the
cmlrTriggerParameters object.
CISCO-ITP-TC-MIBCItpTcPointCodeMaskr/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.396.1.2.1.13
cmlrTriggerSi
The Service Indicator to be matched when the when
the 'si' bit is set in the cmlrTriggerParameters object.
CISCO-ITP-TC-MIBCItpTcServiceIndicatorr/w
Type Values:
0snmm
1sntm
2spare2
3sccp
4tup
5isup
6dupc
7dupf
8mtup
9bisup
10sisup
11spare11
12spare12
13spare13
14spare14
15spare15
 .1.3.6.1.4.1.9.9.396.1.2.1.14
cmlrTriggerNetwork
The network name is used to indicate the network
in which the ruleset will be invoked. This
object only has meaning when the 'network' bit is
set in the cmlrTriggerParameters object.
CISCO-ITP-TC-MIBCItpTcNetworkNamer/w
Type Constraints:
range: 0..19
 .1.3.6.1.4.1.9.9.396.1.2.1.15
cmlrTriggerRuleset
Specifies the ruleset table that should be used if
the trigger is matched and not overruled by a
secondary trigger ruleset. This object only has
meaning when the 'ruleset' bit is set in the
cmlrTriggerParameters obje…
CmlrRuleSetNamer/w
Type Constraints:
range: 0..20
Description:
The configured name used to identify a set of rules
within an specified network.

An octet string specified by an administrator that
must be in human-readable form. The names must
conform to the allowed chara…
 .1.3.6.1.4.1.9.9.396.1.2.1.16
cmlrTriggerActive
This object indicates whether this trigger is active.
The trigger will be active when the corresponding
GTA entry exists and has been linked to trigger.
'true' - Trigger is active and will be processed.
'false' - Trig…
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.396.1.2.1.17
cmlrTriggerStartDateAndTime
The local date and time when this trigger and sub-triggers
will become active. When all bytes of octet string are
set to zero then cmlrInstStartDateAndTime does not apply.
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.9.9.396.1.2.1.18
cmlrTriggerEndDateAndTime
The local date and time this trigger and sub-triggers
will become inactive. When all bytes of octet string are
set to zero then cmlrInstEndDateAndTime does not apply.
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.9.9.396.1.2.1.19
cmlTriggerPreliminaryMatchCounts
This counter indicates that a packet has matched the
contents of the primary trigger. This counter indicates
which triggers are causing packets to be processed by
multi-layer routing. Whether the trigger is fully
m…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.2.1.20
cmlrTriggerMatchCounts
This counter indicates that a packet has matched the trigger
and the result action was performed. When a primary trigger
has secondary triggers this counter indicates that the
primary matched and at least one of the se…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.2.1.21
cmlrTriggerRowStatus
The object is used by a management station to create or
delete the row entry in cmlrTriggerTable following
the RowStatus textual convention.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.396.1.2.1.22

cmlrSubTriggerTable

table
.1.3.6.1.4.1.9.9.396.1.3 · 1 row entry · 13 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmlrSubTriggerTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ITP-MLR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ITP-MLR-MIB::cmlrSubTriggerTable' 
A table that is used to define additional triggers
that work in combination with values specified in 
specific cmlrTriggerTable.  Entries are
added to this table via cmlrSubTriggerRowStatus in 
accordance with the RowStatus convention.
cmlrSubTriggerTableEntry row .1.3.6.1.4.1.9.9.396.1.3.1
Each entry in the cmlrSubTriggerTable works in
conjunction with a entry in cmlrTriggerTable.
The trigger address specified in cmlrSubTriggerTable
is a secondary address and both the primary address
in the cmlrTrigge…
Indexes
Column Syntax OID
cmlrSubTriggerNumber
This object specifies the index for a list of secondary
triggers specified per primary trigger.
CmlrId
Type Constraints:
range: 0..65535
Description:
A numeric identifier used to specify an entry in a list.
Zero is a special value used to indicate no entry.
 .1.3.6.1.4.1.9.9.396.1.3.1.1
cmlrSubTriggerParameters
The following options define the source and
processing of sub-triggers(secondary trigger).

'block' : Indicates that message signal units will be
dropped when they match the specified
…
Bitsr/w
Enumerated Values:
0block
1continue
2matchAll
3cdpa
4cgpa
5pc
6gt
7tt
8gti
9np
10nai
11ssn
12pid
13network
14ruleset
 .1.3.6.1.4.1.9.9.396.1.3.1.2
cmlrSubTriggerGt
The global title address to be matched when either the
'cdpa' or 'cgpa' bits are set in the
cmlrSubTriggerParameters object. This object will return
a string of zero length when the cmlrSubTriggerParameters
'pc' bit …
CISCO-ITP-TC-MIBCItpTcGtaLongDisplayr/w
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.9.9.396.1.3.1.4
cmlrSubTriggerTransType
The translation type specified within the address in the
message signal unit. This object will default to value
based on variant unless the 'tt' bit is set in
cmlrSubTriggerParameters object.
CISCO-ITP-GSCCP-MIBCgsccpGttTransTyper/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.3.1.5
cmlrSubTriggerGti
The global title indicator value for the global tile address
specified within the message signal unit. This object will
default to value based on variant unless the 'gti' bit is
set in cmlrSubTriggerParameters object.
CISCO-ITP-GSCCP-MIBCgsccpGttGlobalTitleIndr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.3.1.6
cmlrSubTriggerNp
The numbering plan of the specified global title address.
This object will default to value based on variant unless
the 'np' bit is set in cmlrSubTriggerParameters object.
CISCO-ITP-TC-MIBCItpTcNumberingPlanr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.3.1.7
cmlrSubTriggerNai
The nature of specified address. This object will default
to value based on variant unless the 'nai' bit is set in
cmlrSubTriggerParameters object.
CISCO-ITP-TC-MIBCItpTcNAIr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.3.1.8
cmlrSubTriggerPc
The point-code in variant-specific format. This
object only has meaning when the 'pc' bit is
set in the cmlrSubTriggerParameters object.
CISCO-ITP-TC-MIBCItpTcPointCoder/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.396.1.3.1.9
cmlrSubTriggerSsn
The subsystem number to be matched when the when the 'pc' bit
is set in the cmlrSubTriggerParameters object.
CISCO-ITP-TC-MIBCItpTcSubSystemNumberr/w
Type Constraints:
range: 0
range: 2..255
 .1.3.6.1.4.1.9.9.396.1.3.1.10
cmlrSubTriggerNetwork
The network name is used to indicate the network
in which the ruleset will be invoked. This
object only has meaning when the 'network' bit is
set in the cmlrSubTriggerParameters object.
CISCO-ITP-TC-MIBCItpTcNetworkNamer/w
Type Constraints:
range: 0..19
 .1.3.6.1.4.1.9.9.396.1.3.1.11
cmlrSubTriggerRuleset
Specifies the ruleset table that should be used if
the trigger is matched and not overruled by a
secondary trigger ruleset. This object only has
meaning when the 'ruleset' bit is set in the
cmlrSubTriggerParameters o…
CmlrRuleSetNamer/w
Type Constraints:
range: 0..20
Description:
The configured name used to identify a set of rules
within an specified network.

An octet string specified by an administrator that
must be in human-readable form. The names must
conform to the allowed chara…
 .1.3.6.1.4.1.9.9.396.1.3.1.12
cmlrSubTriggerMatchCounts
Count of the number of times secondary trigger was matched.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.3.1.13
cmlrSubTriggerRowStatus
The object is used by a management station to create or
delete the row entry in cmlrSubTriggerTable following
the RowStatus textual convention.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.396.1.3.1.14

cmlrAddressTable

table
.1.3.6.1.4.1.9.9.396.1.4 · 1 row entry · 16 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmlrAddressTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ITP-MLR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ITP-MLR-MIB::cmlrAddressTable' 
A table used to create a collection of addresses that
can be searched for exact or best matches.
          
Entries are added to this table via cmlrAddressRowStatus in 
accordance with the RowStatus convention.
cmlrAddressTableEntry row .1.3.6.1.4.1.9.9.396.1.4.1
Each entry in the cmlrAddressTable is used to search
for matches within a messages signalling unit.
Message signalling that match a particular rule can
be directed to cmlrAddressTable to allow MSU to be
directed or mod…
Indexes
Column Syntax OID
cmlrAddressTableName
A name used to define a collection of addresses used to
route and modify messages signalling units.
CmlrName
Type Constraints:
range: 0..20
Description:
The configured name used to identify various
tables used by MLR.

An octet string specified by an administrator that
must be in human-readable form. The names must
conform to the allowed characters that can b…
 .1.3.6.1.4.1.9.9.396.1.4.1.1
cmlrAddressType
The type of addresses in the address tables.
The different types will be used to determine
how to format and convert cmlrAddressDigits.
CmlrAddressType
Type Values:
1bch
2gsmDa
Description:
List of possible table types.

'bch' : Binary Coded Hexadecimal
'gsmDa' : GSM 7 bit Default Alphabet
 .1.3.6.1.4.1.9.9.396.1.4.1.2
cmlrAddressDigits
The digits of the address in following formats as
indicated by cmlrAddressType object.
'hexadecimal' - The digits are hexadecimal digits specified
in ASCII as follows.
'0123456789ABCD…
CmlrAddressDigits
Type Constraints:
range: 0..32
Description:
The configured digits of A-address or B-address
specified in the format indicated by CmlrAddressType.
All values are entered in binary and represent digits
All values are encoded as hexidecimal values and represent
the…
 .1.3.6.1.4.1.9.9.396.1.4.1.3
cmlrAddressExactMatch
This object indicates that the address specified by
cmlrAddressDigits object must exactly match value
in message signalling unit.

'true' - Exact match is specified.
'false' - Best match is specified.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.396.1.4.1.4
cmlrAddressResultParameters
Many of the result parameter used in the processing of
address table have default values. These values are
determined by a combination of variant and operation
type. This object will be provide information which
param…
CmlrResultParametersr/w
Type Values:
0network
1octet
2tranType
3gti
4np
5nai
6pc
7ssn
Description:
In order to specify the results of MLR
statements different values in the packet can be
modified. These values are determined by a combination
of variant and operation type. This object indicates
which objects will …
 .1.3.6.1.4.1.9.9.396.1.4.1.5
cmlrAddressResultNetwork
The network name is used to indicate the network in which
the result operation will be performed.
CISCO-ITP-TC-MIBCItpTcNetworkNamer/w
Type Constraints:
range: 0..19
 .1.3.6.1.4.1.9.9.396.1.4.1.6
cmlrAddressResultType
Specified the type of information to be placed into the
message signal unit or how the it will be processed.
CmlrResultTyper/w
Type Values:
1none
2asname
3group
4gt
5pc
6pcSsn
7block
8continue
9address
10ruleset
Description:
List of possible result types.
'none' : Result not specified.
'asname' : Message will be routed to a particular
destination M3UA or SUA Application Server(AS).
'group' : Message will be routed using i…
 .1.3.6.1.4.1.9.9.396.1.4.1.7
cmlrAddressResultOctet
Information to be placed in the message signal
unit based on the value specified by the
cmlrAddressSetResultType object. When the
cmlrAddressSetResultType object is set to 'pc'
or 'none' this object will not be used …
CmlrResultOctetr/w
Type Constraints:
range: 0..64
range: 255
Description:
An octet string that contains various types of output
from a rule set. The information in this object will
be formatted as follows.

CmlrResultType:
None : Octet string with length of zero.
asname :…
 .1.3.6.1.4.1.9.9.396.1.4.1.8
cmlrAddressResultTransType
The translation type specified within the address in the
message signal unit. This object only applies when the
cmlrAddressSetResultType is set to 'gt' value.
CISCO-ITP-GSCCP-MIBCgsccpGttTransTyper/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.4.1.9
cmlrAddressResultGti
The global title indicator value for the global tile address
specified within the message signal unit. This object only
applies when the cmlrAddressSetResultType is set to
'gt' value.
CISCO-ITP-GSCCP-MIBCgsccpGttGlobalTitleIndr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.4.1.10
cmlrAddressResultNp
The numbering plan for the global tile address specified
within the message signal unit. This object only applies
when the cmlrAddressSetResultType is set to 'gt' value.
CISCO-ITP-TC-MIBCItpTcNumberingPlanr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.4.1.11
cmlrAddressResultNai
The nature of specified address for the global tile
address specified within the message signal unit. This
object only applies when the cmlrAddressSetResultType is
set to 'gt' value.
CISCO-ITP-TC-MIBCItpTcNAIr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.4.1.12
cmlrAddressResultPc
The point-code to be place in the message signal unit. This
object only applies when the cmlrAddressResultType is set
to 'pc' value.
CISCO-ITP-TC-MIBCItpTcPointCoder/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.396.1.4.1.13
cmlrAddressResultSsn
The subsystem number to be place in the message signal unit.
This object only applies when the cmlrAddressResultType is set
to 'ssn' value.
CISCO-ITP-TC-MIBCItpTcSubSystemNumberr/w
Type Constraints:
range: 0
range: 2..255
 .1.3.6.1.4.1.9.9.396.1.4.1.14
cmlrAddressMatchCounts
Count of the number of times address was matched. This counter
is only incremented when rule matches.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.4.1.15
cmlrAddressRowStatus
The object is used by a management station to create or
delete the row entry in cmlrAddressTable following
the RowStatus textual convention.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.396.1.4.1.16

cmlrRuleSetTable

table
.1.3.6.1.4.1.9.9.396.1.5 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmlrRuleSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ITP-MLR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ITP-MLR-MIB::cmlrRuleSetTable' 
A table that is used to specify attributes of an
application-layer message to be matched and the resulting
behavior for handling the message.  Entries are added to 
this table via cmlrRuleSetRowStatus in accordance with the
RowStatus convention.
cmlrRuleSetTableEntry row .1.3.6.1.4.1.9.9.396.1.5.1
Each entry in this table represents a set of addresses
used to perform non-standard routing of messages
signalling units..
Indexes
Column Syntax OID
cmlrRuleSetName
A name used to define a set rules used to transform
traffic.
CmlrRuleSetName
Type Constraints:
range: 0..20
Description:
The configured name used to identify a set of rules
within an specified network.

An octet string specified by an administrator that
must be in human-readable form. The names must
conform to the allowed chara…
 .1.3.6.1.4.1.9.9.396.1.5.1.1
cmlrRuleSetSegmented
This object indicates whether segmented messages will be
processed by rules contained in this ruleset.
'true' - Segmented messages will be processed.
'false' - Segmented messages will not be processed.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.396.1.5.1.2
cmlrRuleSetProtocol
The object is used to establish a default protocol
type for all rules within the rule set. If this
object is set to 'none' will default to protocol
specified by variant.
CmlrRuleProtocolr/w
Type Values:
1none
2gsmMap
3ansi41
Description:
The list of possible protocol types.
'none' : Protocol not specified and will default to value
based on variant or other configuration
information.
'gsmMap' : Global system for mobile communica…
 .1.3.6.1.4.1.9.9.396.1.5.1.3
cmlrRuleSetSearchType
Defines how the rules with the ruleset will be search
as follows.

'seq' : Rules will be processed in ascending order
based on the value of the cmlrRuleNumber
object
'bestMatch' : Rul…
Enumerationr/w
Enumerated Values:
1seq
2bestMatch
 .1.3.6.1.4.1.9.9.396.1.5.1.4
cmlrRuleSetStartDateAndTime
The local date and time when this trigger and sub-triggers
will become active. When the value is null then the
cmlrInstStartDateAndTime does not apply.
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.9.9.396.1.5.1.5
cmlrRuleSetEndDateAndTime
The local date and time this trigger and sub-triggers
will become inactive. When the value is null then the
cmlrInstEndDateAndTime does not apply.
SNMPv2-TCDateAndTimer/w
Type Constraints:
range: 8
range: 11
Description:
A date-time specification.

field octets contents range
----- ------ -------- -----
1 1-2 year* 0..65536
2 3 month …
 .1.3.6.1.4.1.9.9.396.1.5.1.6
cmlrRuleSetRowStatus
The object is used by a management station to create or
delete the row entry in cmlrRuleSetTable following
the RowStatus textual convention.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.396.1.5.1.7

cmlrRuleTable

table
.1.3.6.1.4.1.9.9.396.1.6 · 1 row entry · 51 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmlrRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ITP-MLR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ITP-MLR-MIB::cmlrRuleTable' 
A table that is used to specify attributes of an
application-layer message to be matched and the resulting
behavior for handling the message.  Entries are
added to this table via cmlrRuleRowStatus in 
accordance with the RowStatus convention.
cmlrRuleTableEntry row .1.3.6.1.4.1.9.9.396.1.6.1
Entries in this table are searched in the specified order
defined but cmlrRuleNumber object

-----------------------------------
| operation | ANSI-41 | GSP-MAP |
-----------------------------------|
|…
Indexes
Column Syntax OID
cmlrRuleNumber
This object specifies the index for a list of secondary
triggers specified per routing table. The trigger will be
processed in ascending order.
CmlrId
Type Constraints:
range: 0..65535
Description:
A numeric identifier used to specify an entry in a list.
Zero is a special value used to indicate no entry.
 .1.3.6.1.4.1.9.9.396.1.6.1.1
cmlrRuleOperationType
The list of possible operation types.
'unknown' : undefined operation type.
'alertSc' : Used to identify AlertServiceCenter request
messages in GSM MAP.

'smdPp' : Used to identif…
Enumerationr/w
Enumerated Values:
0unknown
1alertSc
2smdPp
3smsMo
4smsMt
5smsReg
6sriSm
7smsNotify
255all
 .1.3.6.1.4.1.9.9.396.1.6.1.2
cmlrRuleProtocol
Protocol used to examine message.
'none' : Will use protocol specified in cmlrRuleSetProtocol
object.
'gsmMap' : Global system for mobile communications
Mobile Application Part operations …
CmlrRuleProtocolr/w
Type Values:
1none
2gsmMap
3ansi41
Description:
The list of possible protocol types.
'none' : Protocol not specified and will default to value
based on variant or other configuration
information.
'gsmMap' : Global system for mobile communica…
 .1.3.6.1.4.1.9.9.396.1.6.1.3
cmlrRuleInputParameters
Many of the parameter used in the processing of rules
have default values. These values are determined
by a combination of variant and operation type. This
object will be provide information which parameter has
been sp…
Bitsr/w
Enumerated Values:
0destPort
1destSmeGta
2destSmeExact
3destSmeNai
4destSmeNp
5destSmeImsi
6destSmeMin
7destSmscGta
8destSmscExact
9destSmscNai
10destSmscNp
11origSmeGta
12origSmeExact
13origSmeNai
14origSmeNp
15origSmscGta
16origSmscExact
17origSmscNai
18origSmscNp
19pid
20tid
21default
22destSmeTable
23origSmeTable
24destSmeMinDigits
25destSmeMaxDigits
26destSmeTableImsi
27destSmeTableNai
28destSmeTableNp
29destSmscMinDigits
30destSmscMaxDigits
31origSmeMinDigits
32origSmeMaxDigits
33origSmeTableNai
34origSmeTableNp
35origImsiGta
36origImsiExact
37origImsiNai
38origImsiNp
39origImsiMinDigits
40origImsiMaxDigits
41origImsiUnknown
42origImsiTable
43origSmscMinDigits
44origSmscMaxDigits
45multiMessageDialog
 .1.3.6.1.4.1.9.9.396.1.6.1.4
cmlrRuleDestPort
A destination application port number. The value of the
port number maps to the values specified in the User
Data Header (UDH) of the SMS message.

This object only applies when the 'destPort' bit is
s…
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.396.1.6.1.5
cmlrRuleDestSmeGta
The destination short message entity global title address.

When the length of the global title address is zero it
specified a wildcard match and all global title will
match GTA clause of rule.
…
CISCO-ITP-TC-MIBCItpTcGtaLongDisplayr/w
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.9.9.396.1.6.1.6
cmlrRuleDestSmeNai
The nature of specified address for the destination short
message entity global title address specified within the
message signal unit.

This object only applies when the 'destSmeNai' bit…
CISCO-ITP-TC-MIBCItpTcNAIr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.7
cmlrRuleDestSmeNp
The numbering plan for the destination short message
entity global title address specified within the message
signal unit.

This object only applies when the 'destSmeNp' bit is
set in the …
CISCO-ITP-TC-MIBCItpTcNumberingPlanr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.8
cmlrRuleDestSmscGta
The destination short message service center global title
address.

When the length of the global title address is zero it
specified a wildcard match and all global title will
match GTA c…
CISCO-ITP-TC-MIBCItpTcGtaLongDisplayr/w
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.9.9.396.1.6.1.9
cmlrRuleDestSmscNai
The nature of specified address for the destination short
message service center global title address specified
within the message signal unit.

This object only applies when the 'destSm…
CISCO-ITP-TC-MIBCItpTcNAIr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.10
cmlrRuleDestSmscNp
The numbering plan for the destination short message
service center global title address specified within the
message signal unit.

This object only applies when the 'destSmscNp' bit is…
CISCO-ITP-TC-MIBCItpTcNumberingPlanr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.11
cmlrRuleOrigSmeGta
The origination short message entity global title address.

When the length of the global title address is zero it
specified a wildcard match and all global title will
match GTA clause of rule.
…
CISCO-ITP-TC-MIBCItpTcGtaLongDisplayr/w
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.9.9.396.1.6.1.12
cmlrRuleOrigSmeNai
The nature of specified address for the origination short
message entity global title address specified within the
message signal unit.

This object only applies when the 'origSmeNai' bit…
CISCO-ITP-TC-MIBCItpTcNAIr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.13
cmlrRuleOrigSmeNp
The numbering plan for the origination short message
entity global title address specified within the message
signal unit.

This object only applies when the 'origSmeNp' bit is
set in the …
CISCO-ITP-TC-MIBCItpTcNumberingPlanr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.14
cmlrRuleOrigSmscGta
The origination short message service center global title
address.

When the length of the global title address is zero it
specified a wildcard match and all global title will
match GTA c…
CISCO-ITP-TC-MIBCItpTcGtaLongDisplayr/w
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.9.9.396.1.6.1.15
cmlrRuleOrigSmscNai
The nature of specified address for the origination short
message service center global title address specified
within the message signal unit.

This object only applies when the 'origSm…
CISCO-ITP-TC-MIBCItpTcNAIr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.16
cmlrRuleOrigSmscNp
The numbering plan for the origination short message
service center global title address specified within the
message signal unit.

This object only applies when the 'origSmscNp' bit is…
CISCO-ITP-TC-MIBCItpTcNumberingPlanr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.17
cmlrRuleProtocolId
The protocol identifier value used for the 'smsMo and
'smsMt' operations specified by the
cmlrRuleParmsOperationType object.

The value of the cmlrRuleParmsMatchPid object maps to the
values specified …
Unsigned32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.9.9.396.1.6.1.18
cmlrRuleTeleserviceId
The Teleservice identifier value for the following types
of operations specified by the cmlrRuleParmsOperationType
object.
'smdPp'
'smsMo'
'smsMt'
'smsNotify'
The value of the cmlrRuleParmsMatchTid …
Unsigned32r/w
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.396.1.6.1.19
cmlrRuleAddressTable
The name of the entry in the cmlrAddressTable that will be
searched for matches. The table will be search for the
following types of addresses based on values set in the
cmlrRuleInputParameters object.

…
CmlrNamer/w
Type Constraints:
range: 0..20
Description:
The configured name used to identify various
tables used by MLR.

An octet string specified by an administrator that
must be in human-readable form. The names must
conform to the allowed characters that can b…
 .1.3.6.1.4.1.9.9.396.1.6.1.20
cmlrRuleResultParameters
Many of the parameter used in the processing of rules
have default values. These values are determined
by a combination of variant and operation type. This
object will be provide information on which parameter
have be…
CmlrResultParametersr/w
Type Values:
0network
1octet
2tranType
3gti
4np
5nai
6pc
7ssn
Description:
In order to specify the results of MLR
statements different values in the packet can be
modified. These values are determined by a combination
of variant and operation type. This object indicates
which objects will …
 .1.3.6.1.4.1.9.9.396.1.6.1.21
cmlrRuleResultNetwork
The network name is used to indicate the network in which
the result operation will be performed.
CISCO-ITP-TC-MIBCItpTcNetworkNamer/w
Type Constraints:
range: 0..19
 .1.3.6.1.4.1.9.9.396.1.6.1.22
cmlrRuleResultType
Specified the type of information to be placed
into the message signal unit or how the it
will be processed.
CmlrResultTyper/w
Type Values:
1none
2asname
3group
4gt
5pc
6pcSsn
7block
8continue
9address
10ruleset
Description:
List of possible result types.
'none' : Result not specified.
'asname' : Message will be routed to a particular
destination M3UA or SUA Application Server(AS).
'group' : Message will be routed using i…
 .1.3.6.1.4.1.9.9.396.1.6.1.23
cmlrRuleResultOctet
Information to be placed in the message signal
unit based on the value specified by the
cmlrRuleSetResultType object. When the
cmlrRuleSetResultType object is set to 'pc'
or 'none' this object will not be used in the…
CmlrResultOctetr/w
Type Constraints:
range: 0..64
range: 255
Description:
An octet string that contains various types of output
from a rule set. The information in this object will
be formatted as follows.

CmlrResultType:
None : Octet string with length of zero.
asname :…
 .1.3.6.1.4.1.9.9.396.1.6.1.24
cmlrRuleResultTransType
The translation type specified within the address in the
message signal unit. This object only applies when the
cmlrRuleSetResultType is set to 'gt' value.
CISCO-ITP-GSCCP-MIBCgsccpGttTransTyper/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.25
cmlrRuleResultGti
The global title indicator value for the global tile address
specified within the message signal unit. This object only
applies when the cmlrRuleSetResultType is set to
'gt' value.
CISCO-ITP-GSCCP-MIBCgsccpGttGlobalTitleIndr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.26
cmlrRuleResultNp
The numbering plan for the global tile address specified
within the message signal unit. This object only applies
when the cmlrRuleSetResultType is set to 'gt' value.
CISCO-ITP-TC-MIBCItpTcNumberingPlanr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.27
cmlrRuleResultNai
The nature of specified address for the global tile
address specified within the message signal unit. This
object only applies when the cmlrRuleSetResultType is
set to 'gt' value.
CISCO-ITP-TC-MIBCItpTcNAIr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.28
cmlrRuleResultPc
The point-code to be place in the message signal unit. This
object only applies when the cmlrRuleResultType is set
to 'pc' value.
CISCO-ITP-TC-MIBCItpTcPointCoder/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.396.1.6.1.29
cmlrRuleResultSsn
The subsytem number to be place in the message signal unit.
This object only applies when the cmlrRuleResultType is set
to 'ssn' value.
CISCO-ITP-TC-MIBCItpTcSubSystemNumberr/w
Type Constraints:
range: 0
range: 2..255
 .1.3.6.1.4.1.9.9.396.1.6.1.30
cmlrRuleMatchCounts
Count of the number of times this rule was matched.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.6.1.31
cmlrRuleRowStatus
The object is used by a management station to create or
delete the row entry in cmlrRuleTable following
the RowStatus textual convention.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.396.1.6.1.32
cmlrRuleOrigAddressTable
The name of the entry in the cmlrAddressTable that will be
searched for matches. The table will be search for the
following types of addresses based on values set in the
cmlrRuleInputParameters object.

…
CmlrNamer/w
Type Constraints:
range: 0..20
Description:
The configured name used to identify various
tables used by MLR.

An octet string specified by an administrator that
must be in human-readable form. The names must
conform to the allowed characters that can b…
 .1.3.6.1.4.1.9.9.396.1.6.1.33
cmlrRuleDestSmeMinDigits
Specifies the minimum number of digits that the global
title address specified by the cmlrRuleDestSmeGta object
can contain for rule to match.

This object only applies when the 'destSmeMinDigits' bit is
…
CmlrMinimumDigitsr/w
Type Constraints:
range: 1..20
Description:
Minimum number of digits that global title
address can contain and match rule. The minimum
number of digits must be greater than or equal to
the length of the specified address. This parameter
does not apply when t…
 .1.3.6.1.4.1.9.9.396.1.6.1.34
cmlrRuleDestSmeMaxDigits
Specifies the maximum number of digits that the global
title address specified by the cmlrRuleDestSmeGta object
can contain for rule to match.

This object only applies when the 'destSmeMaxDigits' bit is
…
CmlrMaximumDigitsr/w
Type Constraints:
range: 1..20
Description:
Maximum number of digits that global title
address can contain and match rule. The maximum
number of digits must be greater than or equal to
the length of the specified address. Also, the
maximum number of digits …
 .1.3.6.1.4.1.9.9.396.1.6.1.35
cmlrRuleDestSmeTableNai
The nature of specified address for the global tile
address specified within the message signal unit. This
object only applies when the 'destSmeTableNai' bit is
set in the cmlrRuleInputParameters object.
When operati…
CISCO-ITP-TC-MIBCItpTcNAIr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.36
cmlrRuleDestSmeTableNp
The numbering plan for the destination short message
service center global title address specified within the
message signal unit.

This object only applies when the 'destSmeTableNp' bit…
CISCO-ITP-TC-MIBCItpTcNumberingPlanr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.37
cmlrRuleDestSmscMinDigits
Specifies the minimum number of digits that the global
title address specified by the cmlrRuleDestSmscGta object
can contain for rule to match.

This object only applies when the 'destSmscMinDigits' bit i…
CmlrMinimumDigitsr/w
Type Constraints:
range: 1..20
Description:
Minimum number of digits that global title
address can contain and match rule. The minimum
number of digits must be greater than or equal to
the length of the specified address. This parameter
does not apply when t…
 .1.3.6.1.4.1.9.9.396.1.6.1.38
cmlrRuleDestSmscMaxDigits
Specifies the maximum number of digits that the global
title address specified by the cmlrRuleDestSmscGta object
can contain for rule to match.

This object only applies when the 'destSmscMaxDigits' bit i…
CmlrMaximumDigitsr/w
Type Constraints:
range: 1..20
Description:
Maximum number of digits that global title
address can contain and match rule. The maximum
number of digits must be greater than or equal to
the length of the specified address. Also, the
maximum number of digits …
 .1.3.6.1.4.1.9.9.396.1.6.1.39
cmlrRuleOrigSmeMinDigits
Specifies the minimum number of digits that the global
title address specified by the cmlrRuleOrigSmeGta object
can contain for rule to match.

This object only applies when the 'origSmeMinDigits' bit is
…
CmlrMinimumDigitsr/w
Type Constraints:
range: 1..20
Description:
Minimum number of digits that global title
address can contain and match rule. The minimum
number of digits must be greater than or equal to
the length of the specified address. This parameter
does not apply when t…
 .1.3.6.1.4.1.9.9.396.1.6.1.40
cmlrRuleOrigSmeMaxDigits
Specifies the maximum number of digits that the global
title address specified by the cmlrRuleOrigSmeGta can
contain for rule to match.

This object only applies when the 'origSmeMaxDigits' bit is
set in …
CmlrMaximumDigitsr/w
Type Constraints:
range: 1..20
Description:
Maximum number of digits that global title
address can contain and match rule. The maximum
number of digits must be greater than or equal to
the length of the specified address. Also, the
maximum number of digits …
 .1.3.6.1.4.1.9.9.396.1.6.1.41
cmlrRuleOrigSmeTableNai
The nature of specified address for the global tile
address specified within the message signal unit. This
object only applies when the 'origSmeTableNai' bit is
set in the cmlrRuleInputParameters object.
CISCO-ITP-TC-MIBCItpTcNAIr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.42
cmlrRuleOrigSmeTableNp
The numbering plan for the destination short message
service center global title address specified within the
message signal unit.

This object only applies when the 'origSmeTableNp' bit…
CISCO-ITP-TC-MIBCItpTcNumberingPlanr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.43
cmlrRuleOrigImsiGta
The origination short message entity global title address.

When the length of the global title address is zero it
specified a wildcard match and all global title will
match GTA clause of rule.
…
CISCO-ITP-TC-MIBCItpTcGtaLongDisplayr/w
Type Constraints:
range: 0..64
 .1.3.6.1.4.1.9.9.396.1.6.1.44
cmlrRuleOrigImsiNai
The nature of specified address for the origination short
message entity global title address specified within the
message signal unit.

This object only applies when the 'origImsiNai' bi…
CISCO-ITP-TC-MIBCItpTcNAIr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.45
cmlrRuleOrigImsiNp
The numbering plan for the origination short message
entity global title address specified within the message
signal unit.

This object only applies when the 'origImsiNp' bit is
set in the…
CISCO-ITP-TC-MIBCItpTcNumberingPlanr/w
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.396.1.6.1.46
cmlrRuleOrigImsiMinDigits
Specifies the minimum number of digits that the global
title address specified by the cmlrRuleOrigImsiGta object
can contain for rule to match.

This object only applies when the 'origImsiMinDigits' bit i…
CmlrMinimumDigitsr/w
Type Constraints:
range: 1..20
Description:
Minimum number of digits that global title
address can contain and match rule. The minimum
number of digits must be greater than or equal to
the length of the specified address. This parameter
does not apply when t…
 .1.3.6.1.4.1.9.9.396.1.6.1.47
cmlrRuleOrigImsiMaxDigits
Specifies the maximum number of digits that the global
title address specified by the cmlrRuleOrigImsiGta object
can contain for rule to match.

This object only applies when the 'origImsiMaxDigits' bit i…
CmlrMaximumDigitsr/w
Type Constraints:
range: 1..20
Description:
Maximum number of digits that global title
address can contain and match rule. The maximum
number of digits must be greater than or equal to
the length of the specified address. Also, the
maximum number of digits …
 .1.3.6.1.4.1.9.9.396.1.6.1.48
cmlrRuleOrigImsiTable
The name of the entry in the cmlrAddressTable that will be
searched for matches. The table will be search for the
following types of addresses based on values set in the
cmlrRuleInputParameters object.
…
CmlrNamer/w
Type Constraints:
range: 0..20
Description:
The configured name used to identify various
tables used by MLR.

An octet string specified by an administrator that
must be in human-readable form. The names must
conform to the allowed characters that can b…
 .1.3.6.1.4.1.9.9.396.1.6.1.49
cmlrRuleOrigSmscMinDigits
Specifies the minimum number of digits that the global
title address specified by the cmlrRuleOrigSmscGta
object can contain for rule to match.

This object only applies when the 'origSmscMinDigits'
bit…
CmlrMinimumDigitsr/w
Type Constraints:
range: 1..20
Description:
Minimum number of digits that global title
address can contain and match rule. The minimum
number of digits must be greater than or equal to
the length of the specified address. This parameter
does not apply when t…
 .1.3.6.1.4.1.9.9.396.1.6.1.50
cmlrRuleOrigSmscMaxDigits
Specifies the maximum number of digits that the global
title address specified by the cmlrRuleOrigSmscGta object
can contain for rule to match.

This object only applies when the 'origSmscMaxDigits' bit i…
CmlrMaximumDigitsr/w
Type Constraints:
range: 1..20
Description:
Maximum number of digits that global title
address can contain and match rule. The maximum
number of digits must be greater than or equal to
the length of the specified address. Also, the
maximum number of digits …
 .1.3.6.1.4.1.9.9.396.1.6.1.51

cmlrResultSetTable

table
.1.3.6.1.4.1.9.9.396.1.8 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmlrResultSetTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ITP-MLR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ITP-MLR-MIB::cmlrResultSetTable' 
A table used to identify a group of results and define
parameter that apply to all result within the group. 
          
Entries are added to this table via cmlrResultSetRowStatus 
object in accordance with the RowStatus convention.
cmlrResultSetTableEntry row .1.3.6.1.4.1.9.9.396.1.8.1
This table is used to define a collection of results.
Indexes
Column Syntax OID
cmlrResultSetName
A name used to define a result group.
CmlrName
Type Constraints:
range: 0..20
Description:
The configured name used to identify various
tables used by MLR.

An octet string specified by an administrator that
must be in human-readable form. The names must
conform to the allowed characters that can b…
 .1.3.6.1.4.1.9.9.396.1.8.1.1
cmlrResultSetUnavailDiscard
When all results in a group are unavailable this
object defines whether to discard packet or to return
packet to SCCP layer for normal processing.

'true' Packet will be discarded.

'false'…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.396.1.8.1.2
cmlrResultSetRowStatus
The object is used by a management station to create or
delete the row entry in cmlrResultSetTable following
the RowStatus textual convention.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.396.1.8.1.3

cmlrResultTable

table
.1.3.6.1.4.1.9.9.396.1.9 · 1 row entry · 9 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cmlrResultTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ITP-MLR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ITP-MLR-MIB::cmlrResultTable' 
A table used to identify a group of destination resources
The result group lists the appropriate destination 
resources, and the mechanism used to select a single 
destination for a given packet.  State information is 
determined for each possible destination.  Congested 
resources will only be used if no available, non-congested
destinations exist.  Only available destinations are 
considered for routing.
          
Entries are added to this table via cmlrResultRowStatus 
object in accordance with the RowStatus convention.
cmlrResultTableEntry row .1.3.6.1.4.1.9.9.396.1.9.1
This table is used to define a collection of
multi-layer routing statements.
Indexes
Column Syntax OID
cmlrResultNumber
This object specifies the index for a list of results
specified per result group.
CmlrId
Type Constraints:
range: 0..65535
Description:
A numeric identifier used to specify an entry in a list.
Zero is a special value used to indicate no entry.
 .1.3.6.1.4.1.9.9.396.1.9.1.1
cmlrResultType
Result type used to route MSU.
CmlrResultTyper/w
Type Values:
1none
2asname
3group
4gt
5pc
6pcSsn
7block
8continue
9address
10ruleset
Description:
List of possible result types.
'none' : Result not specified.
'asname' : Message will be routed to a particular
destination M3UA or SUA Application Server(AS).
'group' : Message will be routed using i…
 .1.3.6.1.4.1.9.9.396.1.9.1.2
cmlrResultNetwork
The network name is used to indicate the network in which
the result parameters exist.
CISCO-ITP-TC-MIBCItpTcNetworkNamer/w
Type Constraints:
range: 0..19
 .1.3.6.1.4.1.9.9.396.1.9.1.3
cmlrResultOctet
Specified the information used to route the MSU
based on cmlrResultType object.
CmlrResultOctetr/w
Type Constraints:
range: 0..64
range: 255
Description:
An octet string that contains various types of output
from a rule set. The information in this object will
be formatted as follows.

CmlrResultType:
None : Octet string with length of zero.
asname :…
 .1.3.6.1.4.1.9.9.396.1.9.1.4
cmlrResultPc
A destination point code that must exist in the MTP3
routing table, and its state is extracted from MTP3
for availability purposes. This object only has
applies when the cmlrResultType has the 'pc' value.
Otherwise,…
CISCO-ITP-TC-MIBCItpTcPointCoder/w
Type Constraints:
range: 0..16777216
 .1.3.6.1.4.1.9.9.396.1.9.1.5
cmlrResultSsn
The subsystem number to be inserted into MSU. This
object only has applies when the cmlrResultType has
the 'pcSsn' value.
Otherwise, this object will return zero value.
CISCO-ITP-TC-MIBCItpTcSubSystemNumberr/w
Type Constraints:
range: 0
range: 2..255
 .1.3.6.1.4.1.9.9.396.1.9.1.6
cmlrResultWeight
This object specifies the weight applied to the weighted
round robin distribution algorithm used for multi-layer
result group. An integer value in the range of 0 to 10.
A value of ten indicates the resource should …
Integer32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.9.9.396.1.9.1.7
cmlrResultCounts
Number of times this entry was invoked.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.396.1.9.1.8
cmlrResultRowStatus
The object is used by a management station to create or
delete the row entry in cmlrResultsTable following
the RowStatus textual convention.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.396.1.9.1.9