cmlrRuleInputParameters
CISCO-ITP-MLR-MIB ·
.1.3.6.1.4.1.9.9.396.1.6.1.4
Object
column r/w
Bits
Many of the parameter used in the processing of rules
have default values. These values are determined
by a combination of variant and operation type. This
object will be provide information which parameter has
been specified as follows.
'destPort' : Indicates that the destination Port number
is specified in the cmlrRuleDestPort
object.
'destSmeGta' : Indicates that a global title address is
specified in the cmlrRuleDestSmeGta object.
'destSmeExact': Indicates that the cmlrRuleDestSmeGta
address must be an exact match.
'destSmeNai' : Indicates that the nature of specified
address is specified in the
cmlrRuleDestSmeNai object.
'destSmeNp' : Indicates that the numbering plan is
specified in the cmlrRuleDestSmeNp object.
'destSmeImsi' : Indicates that the address specified in the
International Mobile Subscriber
Identification address. This indicator
applies to the cmlrRuleDestSmeGta object.
'destSmeMin' : Indicates that the address specified in the
Mobile Identification Number. This indicator
applies to the cmlrRuleDestSmeGta object.
'destSmscGta' : Indicates that a global title address is
specified in the cmlrRuleDestSmscGta object.
'destSmscExact':Indicates that the cmlrRuleDestSmscGta
address must be an exact match.
'destSmscNai' : Indicates that the nature of specified
address is specified in the
cmlrRuleDestSmscNai object.
'destSmscNp' : Indicates that the numbering plan is
specified in the cmlrRuleDestSmscNp object.
'origSmeGta' : Indicates that a global title address is
specified in the cmlrRuleOrigSmeGta object.
'origSmeExact': Indicates that the cmlrRuleOrigSmeGta
address must be an exact match.
'origSmeNai' : Indicates that the nature of specified
address is specified in the
cmlrRuleOrigSmeNai object.
'origSmeNp' : Indicates that the numbering plan is
specified in the cmlrRuleOrigSmeNp object.
'origSmscGta' : Indicates that a global title address is
specified in the cmlrRuleOrigSmscGta object.
'origSmscExact':Indicates that the cmlrRuleOrigSmeGta
address must be an exact match.
'origSmscNai' : Indicates that the nature of specified
address is specified in the
cmlrRuleOrigSmscNai object.
'origSmscNp' : Indicates that the numbering plan is
specified in the cmlrRuleOrigSmscNp object.
'pid' : Indicates that the Protocol Identifier has
been specified in the cmlrRuleProtocolId
object.
'tid' : Indicates that the Teleservice Identifier
has been specified in the
cmlrRuleTeleserviceId object.
'default' : Indicates the processing of messages that
match the specified operation_name only.
'destSmeTable': A table of destination short message entity
addresses. The name of the table is
specified in the cmlrRuleAddressTable object.
'origSmeTable': A table of origination short message entity
addresses. The name of the table is
specified in the cmlrRuleOrigAddressTable
object.
'destSmeMinDigits'
: Minimum number global title address digits
specified in the cmlrRuleDestSmeGta object
using the cmlrRuleDestSmeMinDigits object.
'destSmeMaxDigits'
: Maximum number global title address digits
specified in the cmlrRuleDestSmeGta object
using the cmlrRuleDestSmeMaxDigits object.
'destSmeTableImsi'
: Indicates that the addresses specified in the
cmlrRuleAddressTable are International Mobile
Subscriber Identification addresses.
'destSmeTableNai'
: Indicates that the all nature of specified
address is specified in the
cmlrRuleDestSmeTableNai object.
'destSmeTableNp'
: Indicates that the numbering plan is
specified in the cmlrRuleDestSmeTableNp
object.
'destSmscMinDigits'
: Minimum number global title address digits
specified in the cmlrRuleDestSmscGta object
using the cmlrRuleDestSmscMinDigits object.
'destSmscMaxDigits'
: Maximum number global title address digits
specified in the cmlrRuleDestSmscGta object
using the cmlrRuleDestSmscMaxDigits object.
'origSmeMinDigits'
: Minimum number global title address digits
specified in the cmlrRuleOrigSmeGta object
using the cmlrRuleOrigSmeMinDigits object.
'origSmeMaxDigits'
: Maximum number global title address digits
specified in the cmlrRuleOrigSmeGta object
using the cmlrRuleOrigSmeMaxDigits object.
'origSmeTableNai'
: Indicates that the all nature of specified
address is specified in the
cmlrRuleOrigSmeTableNai object.
'origSmeTableNp'
: Indicates that the numbering plan is
specified in the cmlrRuleOrigSmeTableNp
object.
'origImsiGta' : Indicates that a global title address is
specified in the cmlrRuleDestSmeGta object.
'origImsiExact'
: Indicates that the cmlrRuleDestSmeGta
address must be an exact match.
'origImsiNai' : Indicates that the nature of specified
address is specified in the
cmlrRuleDestSmeNai object.
'origImsiNp' : Indicates that the numbering plan is
specified in the cmlrRuleDestSmeNp object.
'origImsiMinDigits'
: Minimum number global title address digits
specified in the cmlrRuleOrigImsiGta
object using the cmlrRuleOrigImsiMinDigits
object.
'origImsiMaxDigits'
: Maximum number global title address digits
specified in the cmlrRuleOrigImsiGta object
using the cmlrRuleOrigImsiMaxDigits object.
'origImsiUnknown'
: Indicates that the rule can match when packets
do not contain the origination IMSI address.
That is, when the address is unknown or
unspecified. The IMSI address is only
specified in map version 3. Therefore, the
packets using version 1 or 2 when
match when this parameter is specified.
'origImsiTable'
: A table of origination IMSI addresses. The
name of the table is specified in the
cmlrRuleOrigImsiTable object.
'origSmscMinDigits'
: Minimum number global title address digits
specified in the cmlrRuleOrigSmscGta object
using the cmlrRuleOrigSmscMinDigits object.
'origSmscMaxDigits'
: Maximum number global title address digits
specified in the cmlrRuleOrigSmscGta object
using the cmlrRuleOrigSmscMaxDigits object.
'multiMessageDialog'
: Indicates that this rules applies to packet
that are part of multiple message dialogs.
Context
- MIB
- CISCO-ITP-MLR-MIB
- OID
.1.3.6.1.4.1.9.9.396.1.6.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Default
()- Parent
- cmlrRuleTableEntry
- Groups
- 3
Net-SNMP examples
How SNMP and these commands workWalk the column to discover its indexed instances, or supply every index to read one instance.
Walk the column
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ITP-MLR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ITP-MLR-MIB::cmlrRuleInputParameters'
More examples
Read one indexed instance
/usr/bin/snmpget -v2c -c '<community>' -Pud -Ir -OQUv -m 'CISCO-ITP-MLR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ITP-MLR-MIB::cmlrRuleInputParameters.<cgspInstNetwork>.<cmlrRuleSetName>.<cmlrRuleNumber>'
Translate to a numeric OID
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-ITP-MLR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-ITP-MLR-MIB::cmlrRuleInputParameters'
Syntax
Bits
Values & Constraints
Enumerated Values
0 | destPort |
1 | destSmeGta |
2 | destSmeExact |
3 | destSmeNai |
4 | destSmeNp |
5 | destSmeImsi |
6 | destSmeMin |
7 | destSmscGta |
8 | destSmscExact |
9 | destSmscNai |
10 | destSmscNp |
11 | origSmeGta |
12 | origSmeExact |
13 | origSmeNai |
14 | origSmeNp |
15 | origSmscGta |
16 | origSmscExact |
17 | origSmscNai |
18 | origSmscNp |
19 | pid |
20 | tid |
21 | default |
22 | destSmeTable |
23 | origSmeTable |
24 | destSmeMinDigits |
25 | destSmeMaxDigits |
26 | destSmeTableImsi |
27 | destSmeTableNai |
28 | destSmeTableNp |
29 | destSmscMinDigits |
30 | destSmscMaxDigits |
31 | origSmeMinDigits |
32 | origSmeMaxDigits |
33 | origSmeTableNai |
34 | origSmeTableNp |
35 | origImsiGta |
36 | origImsiExact |
37 | origImsiNai |
38 | origImsiNp |
39 | origImsiMinDigits |
40 | origImsiMaxDigits |
41 | origImsiUnknown |
42 | origImsiTable |
43 | origSmscMinDigits |
44 | origSmscMaxDigits |
45 | multiMessageDialog |
Conformance
Compliance refinements
ciscoMlrMIBCompliance
readonly
Create/Write access is not required.
ciscoMlrMIBComplianceRev1
readonly
Create/Write access is not required.
ciscoMlrMIBComplianceRev2
readonly
Create/Write access is not required.