ZTE-AN-INTERFACE-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
33
Rows
33
Columns
360
zxAnIfTable
table.1.3.6.1.4.1.3902.1015.3.1.1
·
1 row entry
·
8 columns
This table includes the general interface infomation.
An entry in zxAnIfTable.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
zxAnIfTxNetDataRate
Current actual data transmition speed at this interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.1.1.2 |
||||||
|
zxAnIfRxNetDataRate
Current actual data recieving speed at this interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.1.1.3 |
||||||
|
zxAnIfStatCounterAdminStatus
Reset the statistics counter at this interface.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.1.1.4 |
||||||
|
zxAnIfAdminStatus
Operate the interface.
lock -- disable the service and alarm of this interface unlock -- release the lock status reset -- reset interface and then return the before adminStatus. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.1.1.5 |
||||||
|
zxAnIfLastLinkDownTime
The time that the link of interface is down.
The format is YYYY-MM-DD HH:MM:SS. eg 2010-07-07 13:15:27 |
OctetString Constraints: range: 0-19 |
.1.3.6.1.4.1.3902.1015.3.1.1.1.6 |
||||||
|
zxAnIfLastLinkUpTime
The time that the link of interface is up.
The format is YYYY-MM-DD HH:MM:SS. eg 2010-07-07 13:15:27 |
OctetString Constraints: range: 0-19 |
.1.3.6.1.4.1.3902.1015.3.1.1.1.7 |
||||||
|
zxAnIfLoadDefaultConfiguration
Use this parameter to load interface factory default settings.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.1.1.10 |
||||||
|
zxAnIfLinkUpDownSeverity
Linkdown and linkup trap severity.
notification -- zxAnIfAccesslinkDown and zxAnIfAccesslinkUp should be generated when the interface linkup or linkdown occurs. alarm -- zxAnIfAcces… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.1.1.11 |
zxAnEtherIfConfTable
table.1.3.6.1.4.1.3902.1015.3.1.2
·
1 row entry
·
13 columns
This table includes the ethernet-like interface configuration.
An entry in zxAnEtherIfConfTable.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnEtherIfConfDuplexSpeed
DURABLE: { auto_negotiate:all }
The desired speed and duplex for this interface. If the selected control is not possible on the interface, a value of illegal(99) is returned. If the port type does NOT support the defau… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.2.1.1 |
||||||||||||||||
|
zxAnEtherIfActualDuplex
The actual duplex for this interface.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.2.1.2 |
||||||||||||||||
|
zxAnEtherIfActualSpeed
The actual speed for this interface.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.2.1.3 |
||||||||||||||||
|
zxAnEtherIfConf10GEPhyType
The physical tpye of this interface,it is used by 10GE interface
only now. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.2.1.4 |
||||||||||||||||
|
zxAnEtherIfConfConnectorType
The connector tpye of this interface,such as fibre or copper or auto.
if no connector should be regard,it is noUse. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.2.1.5 |
||||||||||||||||
|
zxAnEtherIfConf10GERefClk
The reference clock used by this interface.It is used by 10GE port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.2.1.6 |
||||||||||||||||
|
zxAnEtherIfConfFlowCtrlEnable
Enable/disable the ehternet flow control.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.2.1.7 |
||||||||||||||||
|
zxAnEtherIfPortProtect
Enable/disable the ehternet Port Protect.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.2.1.8 |
||||||||||||||||
|
zxAnSecIfMacLearnedLimitEnable
Enable/disable MAC learning limit.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.2.1.9 |
||||||||||||||||
|
zxAnSecIfMaxLearnedMacs
Max MAC limit learnt.range is [0,32768]
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.2.1.10 |
||||||||||||||||
|
zxAnEtherIfMtu
Max Transmission Unit.
|
Integer32r/w Constraints: range: 1518-9000 |
.1.3.6.1.4.1.3902.1015.3.1.2.1.11 |
||||||||||||||||
|
zxAnEtherIfMcastFloodingCtrl
Multicast flooding Control of this port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.2.1.12 |
||||||||||||||||
|
zxAnEtherIfPortIsolateEnable
Enables and disables the port isolation function.
enable(1): The port is added to the isolation group. All the ports in the isolation group are isolated from each other in layer 2,but they are not isolated fro… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.2.1.13 |
zxAnEtherIfStatTable
table.1.3.6.1.4.1.3902.1015.3.1.3
·
1 row entry
·
33 columns
This table includes the ethernet-like port performance statistics.
An entry in zxAnEtherIfStatTable.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||
|---|---|---|---|---|
|
zxAnEtherIfStatFCSErrors
The FCSErrors counter of ethernet-like interface.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.1 |
||
|
zxAnEtherIfStat15minFCSErrors
The current 15 mininutes FCSErrors counter of ethernet-like
interface. |
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.2 |
||
|
zxAnEtherIf15minFcsErrsThresh
The threshold of zxAnEtherIfStat15minFCSErrors. When it exceeds
this threshold, the zxAnEtherIf15minFcsErrsThreshAlm trap should be generated. If zxAnEtherIfStat15minFCSErrors always exceeds the threshold, only one zxA… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.3 |
||
|
zxAnEtherIfStat1dayFCSErrors
The 1 day FCSErrors counter of ethernet-like interface.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.4 |
||
|
zxAnEtherIf1dayFcsErrsThresh
The threshold of zxAnEtherIfStat1dayFCSErrors. When it exceeds this
threshold,the zxAnEtherIf1dayFcsErrsThreshAlm trap should be generated. If zxAnEtherIfStat1dayFCSErrors always exceeds the threshold,only one zxAnEth… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.5 |
||
|
zxAnEtherIfOutOctetRate
An estimate of the interface's current transmitted bandwidth in
bytes per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the no… |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.6 |
||
|
zxAnEtherIfOutPktRate
An estimate of the interface's current transmitted bandwidth in
packets per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the n… |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.7 |
||
|
zxAnEtherIfOutBandwidthUtil
An estimate of the interface's current transmitted bandwidth
utilization. The value is between 0 to 100. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.8 |
||
|
zxAnEtherIfOutDiscardPktRatio
An estimate of the interface's discarded packets ratio being
transmitted. When bit 3 of zxAnInterfaceMgmtCapabilities is 0, the unit is 1%. When bit 3 of zxAnInterfaceMgmtCapabilities is 1, the unit is … |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.9 |
||
|
zxAnEtherIfOutOctetPeakRate
The interface's peak transmitted bandwidth in bytes per second.
If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967… |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.10 |
||
|
zxAnEtherIfInOctetRate
An estimate of the interface's current received bandwidth in bytes
per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nomina… |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.11 |
||
|
zxAnEtherIfInPktRate
An estimate of the interface's current received bandwidth
in packets per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nom… |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.12 |
||
|
zxAnEtherIfInBandwidthUtil
An estimate of the interface's current received bandwidth
utilization. The value is between 0 to 100. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.13 |
||
|
zxAnEtherIfInDiscardPktRatio
An estimate of the interface's discarded packets ratio received.
When bit 3 of zxAnInterfaceMgmtCapabilities is 0, the unit is 1%. When bit 3 of zxAnInterfaceMgmtCapabilities is 1, the unit is 0.01%. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.14 |
||
|
zxAnEtherIfInOctetPeakRate
The interface's peak received bandwidth in bytes per second.
If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295… |
SNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.15 |
||
|
zxAnEtherIfInErrPktRatio
An estimate of the interface's received error packets ratio.
The value equals (recevied error packets / total received packets) * 100%. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.16 |
||
|
zxAnEtherIfOutBwUtilThresh
The threshold of zxAnEtherIfOutBandwidthUtil.
When it exceeds this threshold, the zxAnEtherIfOutBwUtilThreshAlarm trap should be generated. If zxAnEtherIfOutBandwidthUtil always exceeds the threshold, only one zxAnEthe… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.17 |
||
|
zxAnEtherIfInBandwidthUtilThresh
The threshold of zxAnEtherIfInBandwidthUtil.
When it exceeds this threshold, the zxAnEtherIfInBwUtilThreshAlarm trap should be generated. If zxAnEtherIfInBandwidthUtil always exceeds the threshold, only one zxAnEtherI… |
Integer32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.18 |
||
|
zxAnEtherIfOutPkts
The total number of packets that higher-level protocols requested
be transmitted. Discontinuities in the value of this counter can occur at re-initialization of the management system. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.19 |
||
|
zxAnEtherIfInOctetsCorrect
The total number of correct octets received on the interface,
including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.20 |
||
|
zxAnEtherIfOutOctetsCorrect
The total number of correct octets transmitted out of the
interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.21 |
||
|
zxAnEtherIfInOctetsError
The total number of error octets received on the interface,
including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.22 |
||
|
zxAnEtherIfOutOctetsError
The total number of error octets transmitted out of the
interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.23 |
||
|
zxAnEthIfStat1SecFcsErrs
The current 1 second FCSErrors counter of ethernet-like interface.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.24 |
||
|
zxAnEthIfStat1SecFcsErrsThresh
The threshold of zxAnEthIfStat1SecFcsErrs.
When it exceeds this threshold, the zxAnEthIf1SecFcsErrsThreshAlm trap should be generated. If zxAnEthIfStat1SecFcsErrs always exceeds the threshold, only one zxAnEthIf1SecF… |
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.25 |
||
|
zxAnEtherIfStatOutDiscardPkt
The number of outbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.26 |
||
|
zxAnEtherIfStatInDiscardPkt
The number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet c… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.27 |
||
|
zxAnEtherIfInPkts
The total number of received packets.
Discontinuities in the value of this counter can occur at re-initialization of the management system. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.28 |
||
|
zxAnEtherIfStatEs
Counter of errored seconds.
|
secondsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.29 |
||
|
zxAnEtherIfStatSes
Counter of severely errored seconds.
|
secondsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.30 |
||
|
zxAnEtherIfStatUas
Counter of unavailable seconds.
|
secondsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.31 |
||
|
zxAnEtherIfStatLoss
Counter of loss of signal seconds.
|
secondsSNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.3.1.32 |
||
|
zxAnEtherIfStatReset
Reset interface statistics counter manually when it is set to '1'.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.3.1.100 |
.1.3.6.1.4.1.3902.1015.3.1.4
·
1 row entry
·
5 columns
This table includes the ethernet-like port mirroring.
NOTES:
1. It must have only one MirroringPort in a device now.
2. Mirrored Ports can't be more than 8.
An entry in zxAnEtherPortMirroringTable.
Indexes
zxAnEtherIfMirrorSession
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnEtherIfMirrorSession
The session id of the port mirroring.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.4.1.1 |
||||||||||||
|
zxAnEtherIfMirrorIf
The ethernet-like mirroring port.It is the destination
port. |
ZTE-AN-TC-MIBZxAnIfindexr/w Textual Convention: ZTE-AN-TC-MIBZxAnIfindex Integer32 |
.1.3.6.1.4.1.3902.1015.3.1.4.1.2 |
||||||||||||
|
zxAnEtherIfMirrorPortList
The ethernet-like mirrored port.It is a sequence of
some source ports,such as 1346.1245.2681 . NOTES: Max count of ports is 8 now. |
ObjectIdentifierr/w | .1.3.6.1.4.1.3902.1015.3.1.4.1.3 |
||||||||||||
|
zxAnEtherIfMirrorDirectionList
The traffic direction list of the mirrored port list.
Each value of the sequence represents a traffic direction. The value may be followings: both(1) egress(2), ingress(3), |
ObjectIdentifierr/w | .1.3.6.1.4.1.3902.1015.3.1.4.1.4 |
||||||||||||
|
zxAnEtherIfMirrorRowStatus
Rowstatus of this entry.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.4.1.5 |
zxAnIfLoopBackConfTable
table.1.3.6.1.4.1.3902.1015.3.1.7
·
1 row entry
·
1 columns
This table is interface loop back configuration information table
An entry containing interface loop back configuration information.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
zxAnIfLoopBackConfDetection
Enable or disable the self-loop detection functionality
for special interface. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.7.1.1 |
zxAnIfLoopBackTable
table.1.3.6.1.4.1.3902.1015.3.1.8
·
1 row entry
·
2 columns
This table is interface loop back information table
An entry containing interface loop back information.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnIfLoopBackStatus
The loop back status. The value selfLoop means
interface self-loop is detected. selfLoopRecover means that interface is closed because of self-loop failure. selfLoopRecover means that the status of interface is trying… |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.8.1.1 |
||||||||
|
zxAnIfLoopBackClearAction
Clear Management object loop back status. this action means
set zxAnIfLoopBackStatus value to normal. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.8.1.2 |
.1.3.6.1.4.1.3902.1015.3.1.9.7
·
1 row entry
·
4 columns
This table includes the ethernet-switch port Protect,for all vdsl card.
An entry in zxAnEtherVdslPortProtectTable.
Indexes
zxAnEtherVdslPortProtectId
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnEtherVdslPortProtectId
The Port Protect id.
|
Integer32 Constraints: range: 1-16 |
.1.3.6.1.4.1.3902.1015.3.1.9.7.1.1 |
||||||||||||
|
zxAnEtherVdslPortProtectVlanId
The Vlan Id.
|
Integer32r/w Constraints: range: 1-4095 |
.1.3.6.1.4.1.3902.1015.3.1.9.7.1.2 |
||||||||||||
|
zxAnEtherVdslPortProtectEnable
Enable or disable the ethernet switch Port protect for Vdsl card.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.9.7.1.3 |
||||||||||||
|
zxAnEtherVdslPortProtRowStatus
Rowstatus of this entry.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.9.7.1.10 |
zxAnIfLoopBackTestTable
table.1.3.6.1.4.1.3902.1015.3.1.11
·
1 row entry
·
11 columns
This table provides one row for each interface loopback test.
DSL line loopback test information entry
Indexes
zxAnIfLoopBackTestRack zxAnIfLoopBackTestShelf zxAnIfLoopBackTestSlot zxAnIfLoopBackTestPort zxAnIfLoopBackTestBridgePort
| Column | Syntax | OID | ||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnIfLoopBackTestRack
Rack number of the port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.11.1.1 |
||||||||||||||||||||||||||||
|
zxAnIfLoopBackTestShelf
Shelf number of the port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.11.1.2 |
||||||||||||||||||||||||||||
|
zxAnIfLoopBackTestSlot
Slot number of the port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.11.1.3 |
||||||||||||||||||||||||||||
|
zxAnIfLoopBackTestPort
The port number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.11.1.4 |
||||||||||||||||||||||||||||
|
zxAnIfLoopBackTestBridgePort
bridge port index. eg.It is PVC ID in ADSL port.
If the test is only in the physical port,then this fileds will be 0 |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.11.1.5 |
||||||||||||||||||||||||||||
|
zxAnIfLoopBackTestType
This is loop test action expected.
NOTES: |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.11.1.6 |
||||||||||||||||||||||||||||
|
zxAnIfLoopBackTestOperStatus
This is loop test operational status.
Note: if zxAnIfLoopBackTestOperStatus equal to Excuting(1), ifOperStaus should be loopback test(3). |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.11.1.7 |
||||||||||||||||||||||||||||
|
zxAnIfLoopBackTestResult
This is loop test result and includes reasons for test failures.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.11.1.8 |
||||||||||||||||||||||||||||
|
zxAnIfLoopBackTestConfSendCells
The count of cells will be sent in the loopback test.
|
SNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.11.1.9 |
||||||||||||||||||||||||||||
|
zxAnIfLoopBackTestRstRecvCells
The count of recived cells in the loopback test.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.11.1.10 |
||||||||||||||||||||||||||||
|
zxAnIfLoopBackTestRowStatus
Loop test table RowStatus .
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.11.1.15 |
.1.3.6.1.4.1.3902.1015.3.1.12
·
1 row entry
·
7 columns
This table includes the queue performance Stat.
An entry in zxAnEtherIfQueueStatTable.
Indexes
IF-MIBifIndex zxAnEtherIfQueueNo
| Column | Syntax | OID |
|---|---|---|
|
zxAnEtherIfQueueNo
The queeue number of the interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.12.1.1 |
|
zxAnEtherIfQueueInOctets
The total number of octets received on the queue of the interface.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.3.1.12.1.2 |
|
zxAnEtherIfQueueInPkts
The total number of packets received on the queue of the interface.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.3.1.12.1.3 |
|
zxAnEtherIfQueueOutOctets
The total number of octets transmitted out of the queue of the interface.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.3.1.12.1.4 |
|
zxAnEtherIfQueueOutPkts
The total number of packets transmitted out of the queue of the interface.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.3.1.12.1.5 |
|
zxAnEtherIfQueueDropOctets
The total number of octets droped in the queue of the interface.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.3.1.12.1.6 |
|
zxAnEtherIfQueueDropPkts
The total number of packets droped in the queue of the interface.
|
SNMPv2-SMICounter32 Textual Convention: SNMPv2-SMICounter32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.3.1.12.1.7 |
.1.3.6.1.4.1.3902.1015.3.1.13
·
1 row entry
·
29 columns
This table provides objects to monitor optical module in a network element. It also provides objects for setting high and low threshold levels.
An entry in zxAnOpticalModuleMonTable.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
zxAnOpticalPowerRxCurrValue
The optical power monitored at the input.
Value 0x7fffffff means unsupported. |
0.001dbmSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.1 |
||||||
|
zxAnOpticalPowerRxLowerThresh
The lower limit threshold on input optical power.
The alarm should be generated when zxAnOpticalPowerRxCurrValue is lower than this threshold. |
0.1dbmSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.2 |
||||||
|
zxAnOpticalPowerRxUpperThresh
The upper limit threshold on input optical power.
The alarm should be generated when zxAnOpticalPowerRxCurrValue exceeds this threshold. |
0.1dbmSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.3 |
||||||
|
zxAnOpticalPowerTxCurrValue
The optical power monitored at the output.
Value 0x7fffffff means unsupported. |
0.001dbmSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.4 |
||||||
|
zxAnOpticalPowerTxLowerThresh
The lower limit threshold on output optical power.
The alarm should be generated when zxAnOpticalPowerTxCurrValue is lower than this threshold. |
0.1dbmSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.5 |
||||||
|
zxAnOpticalPowerTxUpperThresh
The upper limit threshold on output optical power.
The alarm should be generated when zxAnOpticalPowerTxCurrValue exceeds this threshold. |
0.1dbmSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.6 |
||||||
|
zxAnOpticalIfRxRate
The optical modules interface rate at the input.
|
0.1Gb/sSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.7 |
||||||
|
zxAnOpticalIfTxRate
The optical modules interface rate at the output.
|
0.1Gb/sSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.8 |
||||||
|
zxAnOpticalBiasCurrent
The optical modules bias current .
Value 0x7fffffff means unsupported. |
0.001mASNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.9 |
||||||
|
zxAnOpticalSupplyVoltage
The optical modules supply voltage.
Value 0x7fffffff means unsupported. |
0.001 VoltsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.10 |
||||||
|
zxAnOpticalWavelength
The optical modules wavelength.
Value 0x7fffffff means unsupported. |
nmSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.11 |
||||||
|
zxAnOpticalTemperature
The optical modules temperature .
Value 0x7fffffff means unsupported. |
0.001DegreesSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.12 |
||||||
|
zxAnOpticalVenderPn
The optical modules vender P/N.
Empty string means unsupported. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.13 |
||||||
|
zxAnOpticalVenderName
The optical modules vender name.
Empty string means unsupported. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.14 |
||||||
|
zxAnOpticalBiasCurrLowerThresh
The lower limit threshold on optical modules bias current.
The alarm should be generated when zxAnOpticalBiasCurrent is lower than this threshold. |
0.1mAInteger32r/w Constraints: range: 0-1500 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.51 |
||||||
|
zxAnOpticalBiasCurrUpperThresh
The upper limit threshold on optical modules bias current.
The alarm should be generated when zxAnOpticalBiasCurrent exceeds this threshold. |
0.1mAInteger32r/w Constraints: range: 0-1500 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.52 |
||||||
|
zxAnOpticalVoltageLowerThresh
The lower limit threshold on optical modules supply voltage.
The alarm should be generated when zxAnOpticalSupplyVoltage is lower than this threshold. |
0.1 VoltInteger32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.53 |
||||||
|
zxAnOpticalVoltageUpperThresh
The upper limit threshold on optical modules supply voltage.
The alarm should be generated when zxAnOpticalSupplyVoltage exceeds this threshold. |
0.1 VoltInteger32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.54 |
||||||
|
zxAnOpticalTempLowerThresh
The lower limit threshold on optical modules temperature.
The alarm should be generated when zxAnOpticalTemperature is lower than this threshold. |
CentigradeInteger32r/w Constraints: range: -50-100 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.55 |
||||||
|
zxAnOpticalTempUpperThresh
The upper limit threshold on optical modules temperature.
The alarm should be generated when zxAnOpticalTemperature exceeds this threshold. |
CentigradeInteger32r/w Constraints: range: -50-100 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.56 |
||||||
|
zxAnOpticalIfRate
The optical module interface rate.
Value 0x7fffffff means unsupported. |
0.1GbpsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.57 |
||||||
|
zxAnOpticalFiberType
The optical module Fiber Type.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.13.1.58 |
||||||
|
zxAnOpticalVersionLevel
The optical module vension Level.
Empty string means unsupported. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.59 |
||||||
|
zxAnOpticalVendorSn
The optical module vender sn.
Empty string means unsupported. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.60 |
||||||
|
zxAnOpticalProductionDate
The optical module production date.
Empty string means unsupported. |
OctetString Constraints: range: 0-8 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.61 |
||||||
|
zxAnOpticalModuleType
The optical module type.
Empty string means unsupported. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.62 |
||||||
|
zxAnOpticalFiberInterfaceType
The optical fiber interface.
Empty string means unsupported. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.63 |
||||||
|
zxAnOpticalMaterialNumber
The material number of pin(A2).
The string which is composed of 'f' means unsupported. |
OctetString Constraints: range: 0-20 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.64 |
||||||
|
zxAnOpticalRegisterData
The optical module data is from register.
The string which is composed of 'f' means unsupported. |
OctetString Constraints: range: 0-128 |
.1.3.6.1.4.1.3902.1015.3.1.13.1.65 |
zxAnComPortTable
table.1.3.6.1.4.1.3902.1015.3.1.14.2.1
·
1 row entry
·
17 columns
The COM port table.
An entry in the COM port table .
Indexes
zxAnComPortIfIndex
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnComPortIfIndex
The index of the COM port.
|
ZTE-AN-TC-MIBZxAnIfindex Textual Convention: ZTE-AN-TC-MIBZxAnIfindex Integer32 |
.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.1 |
||||||||||||||
|
zxAnComPortConfigType
The config type of the COM port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.2 |
||||||||||||||
|
zxAnComPortFlowControl
The flow control of the COM port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.3 |
||||||||||||||
|
zxAnComPortCommMode
The communication mode of the COM port.
ipAndPort (1) - The COM port will send and receive message with the specified IP and port. virtualComPort (2) - The COM port will be managed a… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.4 |
||||||||||||||
|
zxAnComPortIpCommProtocol
The protocol of the COM port communication in ipAndPort mode.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.5 |
||||||||||||||
|
zxAnComLocalTcpUdpPort
The local TCP/UDP port for the COM port communication.
|
Integer32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.6 |
||||||||||||||
|
zxAnComPortPeerIpAddress
The peer IP address for the COM port communication.
|
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.7 |
||||||||||||||
|
zxAnComPortPeerTcpUdpPort
The TCP/UDP port for the COM port communication.
|
Integer32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.8 |
||||||||||||||
|
zxAnComPortEncryptionMode
The encryption mode for the COM port communication.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.9 |
||||||||||||||
|
zxAnComPortCacheDataEnable
The cache ability while reading data from the COM port.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.10 |
||||||||||||||
|
zxAnComPacketTransmitSize
The packet size condition while transmitting packet.
The packet will be transmitted once this size satisfied. |
bytesSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.11 |
||||||||||||||
|
zxAnComPacketTransmitInterval
The interval condition while transmitting packet.
The packet will be transmitted once the time satisfied. |
msSNMPv2-SMIInteger32r/w Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.12 |
||||||||||||||
|
zxAnComPortAdminMode
The mode of COM port.
discovered(1) - The COM port will be discovered with broadcast by the manager. report(2) - The COM port will report itself to the manager. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.13 |
||||||||||||||
|
zxAnComPortReportIpType
The remote manager ip address address type such as IPv4 or IPv6.
|
INET-ADDRESS-MIBInetAddressTyper/w Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.14 |
||||||||||||||
|
zxAnComPortReportIp
The remote manager ip address of COM port in report mode.
|
INET-ADDRESS-MIBInetAddressr/w Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.15 |
||||||||||||||
|
zxAnComPortReportPort
The remote manager TCP/IP port of COM port in report mode.
|
Integer32r/w Constraints: range: 1-65535 |
.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.16 |
||||||||||||||
|
zxAnComPortVlanId
The VLAN ID is used to transfer COM package.
Value 0 means no VLAN ID is specified. |
Integer32r/w Constraints: range: 0-4094 |
.1.3.6.1.4.1.3902.1015.3.1.14.2.1.1.17 |
zxAnEthHisStatsTable
table.1.3.6.1.4.1.3902.1015.3.1.15
·
1 row entry
·
18 columns
A list of Ethernet statistics entries.
A collection of statistics kept for a particular
Ethernet interface. As an example, an instance of the
etherHistStatsPkts object might be named etherHistStatsPkts.1
Ethernet interface. As an example, an instance of the
etherHistStatsPkts object might be named etherHistStatsPkts.1
Indexes
zxAnEthHisStatsIndex
| Column | Syntax | OID |
|---|---|---|
|
zxAnEthHisStatsIndex
The value of this object uniquely identifies this
etherHistStats entry. |
ZTE-AN-TC-MIBZxAnIfindex Textual Convention: ZTE-AN-TC-MIBZxAnIfindex Integer32 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.1 |
|
zxAnEthHisDropEvents
The total number of events in which packets
were dropped by the probe due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has b… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.2 |
|
zxAnEthHisInOctets
The total number of octets of data (including
those in bad packets) received on the network (excluding framing bits but including FCS octets). This object can be used as a reasonable estimate of ethernet … |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.3 |
|
zxAnEthHisInPkts
The total number of packets (including bad packets,
broadcast packets, and multicast packets) received. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.4 |
|
zxAnEthHisInBroadcastPkts
The total number of good packets received that were
directed to the broadcast address. Note that this does not include multicast packets. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.5 |
|
zxAnEthHisInMulticastPkts
The total number of good packets received that were
directed to a multicast address. Note that this number does not include packets directed to the broadcast address. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.6 |
|
zxAnEthHisInCRCAlignErrors
The total number of packets received that
had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.7 |
|
zxAnEthHisInUndersizePkts
The total number of packets received that were
less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.8 |
|
zxAnEthHisInOversizePkts
The total number of packets received that were
longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.9 |
|
zxAnEthHisInFragments
The total number of packets received that were less
than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.10 |
|
zxAnEthHisInJabbers
The total number of packets received that were
longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.11 |
|
zxAnEthHisCollisions
The best estimate of the total number of collisions
on this Ethernet segment. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.12 |
|
zxAnEthHisInPkts64Octets
The total number of packets (including bad
packets) received that were 64 octets in length (excluding framing bits but including FCS octets). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.13 |
|
zxAnEthHisInPkts65to127Octets
The total number of packets (including bad
packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS octets). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.14 |
|
zxAnEthHisInPkts128to255Octets
The total number of packets (including bad
packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.15 |
|
zxAnEthHisInPkts256to511Octets
The total number of packets (including bad
packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.16 |
|
zxAnEthHisInPkts512to1023Octets
The total number of packets (including bad
packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.17 |
|
zxAnEthHisInPkts1024to1518Octets
The total number of packets (including bad
packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including FCS octets). |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.15.1.18 |
zxAnIfXHisTable
table.1.3.6.1.4.1.3902.1015.3.1.16
·
1 row entry
·
9 columns
A list of interface entries. The number of entries is given by the value of ifNumber. This table contains additional objects for the interface table.
An entry containing additional management information
applicable to a particular interface.
applicable to a particular interface.
Indexes
zxAnIfXHisIndex
| Column | Syntax | OID |
|---|---|---|
|
zxAnIfXHisIndex
The value of this object uniquely identifies this
etherHisStats entry. |
ZTE-AN-TC-MIBZxAnIfindex Textual Convention: ZTE-AN-TC-MIBZxAnIfindex Integer32 |
.1.3.6.1.4.1.3902.1015.3.1.16.1.1 |
|
zxAnIfXHisInOctets
The total number of octets received on the interface,
including framing characters. This object is a 64-bit version of ifInOctets. Discontinuities in the value of this counter can occur at re-initializat… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.16.1.2 |
|
zxAnIfXHisInUcastPkts
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. This object is a 64-bit version of ifInUcastPkts. … |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.16.1.3 |
|
zxAnIfXHisInMulticastPkts
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. T… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.16.1.4 |
|
zxAnIfXHisInBroadcastPkts
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. This object is a 64-bit version of ifInBroadcastPkts. Discontinu… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.16.1.5 |
|
zxAnIfXHisOutOctets
The total number of octets transmitted out of the
interface, including framing characters. This object is a 64-bit version of ifOutOctets. Discontinuities in the value of this counter can occur at re-ini… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.16.1.6 |
|
zxAnIfXHisOutUcastPkts
The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. Thi… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.16.1.7 |
|
zxAnIfXHisOutMulticastPkts
The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer prot… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.16.1.8 |
|
zxAnIfXHisOutBroadcastPkts
The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. This object is a 64-… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.16.1.9 |
zxAnIfHisTable
table.1.3.6.1.4.1.3902.1015.3.1.17
·
1 row entry
·
13 columns
A list of interface entries. The number of entries is given by the value of ifNumber.
An entry containing management information applicable to a
particular interface.
particular interface.
Indexes
zxAnIfHisIndex
| Column | Syntax | OID |
|---|---|---|
|
zxAnIfHisIndex
A unique value, greater than zero, for each interface. It
is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initiali… |
ZTE-AN-TC-MIBZxAnIfindex Textual Convention: ZTE-AN-TC-MIBZxAnIfindex Integer32 |
.1.3.6.1.4.1.3902.1015.3.1.17.1.1 |
|
zxAnIfHisInOctets
The total number of octets received on the interface,
including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.17.1.2 |
|
zxAnIfHisInUcastPkts
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.17.1.3 |
|
zxAnIfHisInNUcastPkts
deprecated
The number of packets, delivered by this sub-layer to a
higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occ… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.17.1.4 |
|
zxAnIfHisInDiscards
The number of inbound packets which were chosen to be
discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet co… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.17.1.5 |
|
zxAnIfHisInErrors
For packet-oriented interfaces, the number of inbound
packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character- oriented or fixed-length interfaces, the number of i… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.17.1.6 |
|
zxAnIfHisInUnknownProtos
For packet-oriented interfaces, the number of packets
received via the interface which were discarded because of an unknown or unsupported protocol. For character-oriented or fixed-length interfaces that support protoc… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.17.1.7 |
|
zxAnIfHisOutOctets
The total number of octets transmitted out of the
interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at othe… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.17.1.8 |
|
zxAnIfHisOutUcastPkts
The total number of packets that higher-level protocols
requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. … |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.17.1.10 |
|
zxAnIfHisOutNUcastPkts
deprecated
The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. … |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.17.1.11 |
|
zxAnIfHisOutDiscards
The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer s… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.17.1.12 |
|
zxAnIfHisOutErrors
For packet-oriented interfaces, the number of outbound
packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, the number of outbound transmission units that could not… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.17.1.13 |
|
zxAnIfHisOutQueueLength
deprecated
The length of the output packet queue (in packets).
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.17.1.14 |
zxAnIfVlanStatTable
table.1.3.6.1.4.1.3902.1015.3.1.18
·
1 row entry
·
31 columns
a entry of this table.
Indexes
zxAnIfVlanStatIfIndex zxAnIfVlanId
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnIfVlanStatIfIndex
The index of this Ethernet vlan stat table
|
ZTE-AN-TC-MIBZxAnIfindex Textual Convention: ZTE-AN-TC-MIBZxAnIfindex Integer32 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.1 |
||||||||||||
|
zxAnIfVlanId
The vlan id
|
ZTE-AN-TC-MIBVlanId Textual Convention: ZTE-AN-TC-MIBVlanId Integer32Type Constraints: range: 1..4094 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.2 |
||||||||||||
|
zxAnIfVlanStatEnable
Enable/disable the ethernet vlan Statisic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.18.1.3 |
||||||||||||
|
zxAnIfVlanInBroadcastPkts
Received Broadcast Packets
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.4 |
||||||||||||
|
zxAnIfVlanInUnicastPkts
Received Unicast Packets
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.5 |
||||||||||||
|
zxAnIfVlanInMulticastPkts
Received Multicast Packets
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.6 |
||||||||||||
|
zxAnIfVlanInDiscardBCastPkts
Received Broadcast Packets
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.7 |
||||||||||||
|
zxAnIfVlanInDiscardUCastPkts
Received Discarded Unicast Packets
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.8 |
||||||||||||
|
zxAnIfVlanInDiscardMCastPkts
Received Discarded Multicast Packets
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.9 |
||||||||||||
|
zxAnIfVlanOutBroadcastPkts
Transmitted Broadcast Packets
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.10 |
||||||||||||
|
zxAnIfVlanOutUnicastPkts
Transmitted Unicast Packets
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.11 |
||||||||||||
|
zxAnIfVlanOutMulticastPkts
Transmitted Multicast Packets
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.12 |
||||||||||||
|
zxAnIfVlanOutDiscardBCastPkts
Transmitted Discarded Broadcast Packets
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.13 |
||||||||||||
|
zxAnIfVlanOutDiscardUCastPkts
Transmitted Discarded Unicast Packets
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.14 |
||||||||||||
|
zxAnIfVlanOutDiscardMCastPkts
Transmitted Discarded Multicast Packets
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.15 |
||||||||||||
|
zxAnIfVlanOutPkts
The total number of packets transmitted out of the
interface. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.16 |
||||||||||||
|
zxAnIfVlanInPkts
The total number of packets received on the interface.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.17 |
||||||||||||
|
zxAnIfVlanOutOctets
The total number of octets transmitted out of the interface.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.18 |
||||||||||||
|
zxAnIfVlanInOctets
The total number of octets received on the interface.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.19 |
||||||||||||
|
zxAnIfVlanDiscardPkts
The total number of discarded packets.
|
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.20 |
||||||||||||
|
zxAnIfVlanOutBandwidthDisRatio
This object indicates the ratio of transmitted packets discarded
by this traffic processor due to subscriber bandwidth limitations. Discontinuities in the value of this counter can occur at re-initializat… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.21 |
||||||||||||
|
zxAnIfVlanInBandwidthDisRatio
This object indicates the ratio of received packets discarded
by this traffic processor due to subscriber bandwidth limitations. Discontinuities in the value of this counter can occur at re-initialization… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.22 |
||||||||||||
|
zxAnIfVlanOutWredDisRatio
This object indicates the ratio of transmitted packets discarded
by this traffic processor due to congestion in the queues. Discontinuities in the value of this counter can occur at re-initialization of t… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.23 |
||||||||||||
|
zxAnIfVlanOutBandwidthDisPkts
This object indicates the number of transmitted packets discarded
by this traffic processor due to subscriber bandwidth limitations. Discontinuities in the value of this counter can occur at re-initializa… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.24 |
||||||||||||
|
zxAnIfVlanInBandwidthDisPkts
This object indicates the number of received packets discarded
by this traffic processor due to subscriber bandwidth limitations. Discontinuities in the value of this counter can occur at re-initializatio… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.25 |
||||||||||||
|
zxAnIfVlanOutWredDisPkts
This object indicates the number of transmitted packets discarded
by this traffic processor due to congestion in the queues. Discontinuities in the value of this counter can occur at re-initialization of … |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.26 |
||||||||||||
|
zxAnIfVlanOutBitRate
The transmitted bit rate of the interface.
|
kbpsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.27 |
||||||||||||
|
zxAnIfVlanInBitRate
The received bit rate of the interface.
|
kbpsSNMPv2-SMIGauge32 Textual Convention: SNMPv2-SMIGauge32 Unsigned32Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.28 |
||||||||||||
|
zxAnIfVlanOutErroredOctets
The total number of errored octets transmitted out of the
VLAN, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.29 |
||||||||||||
|
zxAnIfVlanInErroredOctets
The total number of errored octets received on the VLAN,
including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.18.1.30 |
||||||||||||
|
zxAnIfVlanStatRowStatus
The row status of this entry.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.18.1.50 |
.1.3.6.1.4.1.3902.1015.3.1.19
·
1 row entry
·
4 columns
Interface packet rate limit information table.
A entry of this table.
Indexes
zxAnIfPktRateLimitIfIndex
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnIfPktRateLimitIfIndex
deprecated
The index of this packet rate limit ifIndex.
|
ZTE-AN-TC-MIBZxAnIfindex Textual Convention: ZTE-AN-TC-MIBZxAnIfindex Integer32 |
.1.3.6.1.4.1.3902.1015.3.1.19.1.1 |
||||||||||||
|
zxAnIfBroadcastPktRateLimit
deprecated
Maximum broadcast packet rate.
If it is 65535, then no limit. |
ppsInteger32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.3902.1015.3.1.19.1.2 |
||||||||||||
|
zxAnIfFloodingPktRateLimit
deprecated
Maximum flooding packet rate.
If it is 65535,then no limit. |
ppsInteger32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.3902.1015.3.1.19.1.3 |
||||||||||||
|
zxAnIfPktRateLimitRowStatus
deprecated
The row status of this entry.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.19.1.30 |
zxAnIfVlanRateLimitTable
table.1.3.6.1.4.1.3902.1015.3.1.20
·
1 row entry
·
6 columns
Interface VLAN rate limit information table.
A entry of this table.
Indexes
zxAnIfVlanRateLimitIfIndex zxAnIfVlanRateLimitVlanId zxAnIfVlanRateLimitDirection
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnIfVlanRateLimitIfIndex
The index of this interface VLAN rate limit table.
|
ZTE-AN-TC-MIBZxAnIfindex Textual Convention: ZTE-AN-TC-MIBZxAnIfindex Integer32 |
.1.3.6.1.4.1.3902.1015.3.1.20.1.1 |
||||||||||||
|
zxAnIfVlanRateLimitVlanId
The VLAN ID.
|
ZTE-AN-TC-MIBVlanId Textual Convention: ZTE-AN-TC-MIBVlanId Integer32Type Constraints: range: 1..4094 |
.1.3.6.1.4.1.3902.1015.3.1.20.1.2 |
||||||||||||
|
zxAnIfVlanRateLimitDirection
The VLAN rate limit direction.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.20.1.3 |
||||||||||||
|
zxAnIfVlanRateLimitCir
The committed information rate.
|
kbpsInteger32r/w Constraints: range: 0-10000000 |
.1.3.6.1.4.1.3902.1015.3.1.20.1.4 |
||||||||||||
|
zxAnIfVlanRateLimitPir
The peak information rate.
|
kbpsInteger32r/w Constraints: range: 0-10000000 |
.1.3.6.1.4.1.3902.1015.3.1.20.1.5 |
||||||||||||
|
zxAnIfVlanRateLimitRowStatus
The row status of this entry.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.20.1.30 |
.1.3.6.1.4.1.3902.1015.3.1.21.1
·
1 row entry
·
4 columns
The global protocol rate limiting table. This table specifies protocol rate limiting configuration, which is used to reduce the maximum traffic rate for each protocol such as DHCP, IGMP, ICMP and so on. This table supports get-next from first-class index.
The protocol rate limiting entry.
Indexes
zxAnProtoRateLimitGlbIfType zxAnProtoRateLimitGlbProtoType
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnProtoRateLimitGlbIfType
Supported interface type.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.21.1.1.1 |
||||||||||||||||||||
|
zxAnProtoRateLimitGlbProtoType
Supported protocol type.
|
ProtoRateLimitType Textual Convention: ProtoRateLimitType EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.21.1.1.2 |
||||||||||||||||||||
|
zxAnProtoRateLimitGlbIngress
The packet rate limit egress value.
0xFFFF means unconfigured. |
Integer32r/w Constraints: range: 0-10000 |
.1.3.6.1.4.1.3902.1015.3.1.21.1.1.3 |
||||||||||||||||||||
|
zxAnProtoRateLimitGlbEgress
The packet rate limit ingress value.
0xFFFF means unconfigured. |
Integer32r/w Constraints: range: 0-10000 |
.1.3.6.1.4.1.3902.1015.3.1.21.1.1.4 |
.1.3.6.1.4.1.3902.1015.3.1.21.2
·
1 row entry
·
5 columns
The valn protocol rate limiting table. This table specifies protocol rate limiting configuration, which is used to reduce the maximum traffic rate for each protocol such as DHCP, IGMP, ICMP and so on. This table supports get-next without index.
The protocol rate limiting entry.
Indexes
zxAnProtoRateLmtVlanId zxAnProtoRateLmtVlanProtoType
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnProtoRateLmtVlanId
The VLAN ID.
|
ZTE-AN-TC-MIBVlanId Textual Convention: ZTE-AN-TC-MIBVlanId Integer32Type Constraints: range: 1..4094 |
.1.3.6.1.4.1.3902.1015.3.1.21.2.1.1 |
||||||||||||||||||||
|
zxAnProtoRateLmtVlanProtoType
Supported Protocol Type.
|
ProtoRateLimitType Textual Convention: ProtoRateLimitType EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.21.2.1.2 |
||||||||||||||||||||
|
zxAnProtoRateLmtVlanIngress
The packet rate limit ingress value.
0xFFFF means unconfigured. |
Integer32r/w Constraints: range: 0-10000 |
.1.3.6.1.4.1.3902.1015.3.1.21.2.1.3 |
||||||||||||||||||||
|
zxAnProtoRateLmtVlanEgress
The packet rate limit egress value.
0xFFFF means unconfigured. |
Integer32r/w Constraints: range: 0-10000 |
.1.3.6.1.4.1.3902.1015.3.1.21.2.1.4 |
||||||||||||||||||||
|
zxAnProtoRateLmtVlanRowStatus
The row status of this entry.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.21.2.1.50 |
.1.3.6.1.4.1.3902.1015.3.1.21.3
·
1 row entry
·
10 columns
The global protocol rate limiting table. This table specifies protocol rate limiting configuration, which is used to reduce the maximum traffic rate for each protocol such as DHCP, IGMP, ICMP and so on. This table supports get-next from 'zxAnProtoRateLimitIfPort' index.
The vport protocol rate limiting entry.
Indexes
zxAnProtoRateLimitIfRack zxAnProtoRateLimitIfShelf zxAnProtoRateLimitIfSlot zxAnProtoRateLimitIfPort zxAnProtoRateLimitIfOnu zxAnProtoRateLimitIfLogicId zxAnProtoRateLimitIfProtoType
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnProtoRateLimitIfRack
This object indicates the rack number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.21.3.1.1 |
||||||||||||||||||||
|
zxAnProtoRateLimitIfShelf
This object indicates the shelf number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.21.3.1.2 |
||||||||||||||||||||
|
zxAnProtoRateLimitIfSlot
This object indicates the slot number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.21.3.1.3 |
||||||||||||||||||||
|
zxAnProtoRateLimitIfPort
This object indicates the physical port number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.21.3.1.4 |
||||||||||||||||||||
|
zxAnProtoRateLimitIfOnu
This object indicates the ONU number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.21.3.1.5 |
||||||||||||||||||||
|
zxAnProtoRateLimitIfLogicId
This Logical id of means vport
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.21.3.1.6 |
||||||||||||||||||||
|
zxAnProtoRateLimitIfProtoType
Supported Protocol Type.
|
ProtoRateLimitType Textual Convention: ProtoRateLimitType EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.21.3.1.7 |
||||||||||||||||||||
|
zxAnProtoRateLimitIfIngress
The packet rate limit ingress value.
0xFFFF means unconfigured. |
Integer32r/w Constraints: range: 0-10000 |
.1.3.6.1.4.1.3902.1015.3.1.21.3.1.8 |
||||||||||||||||||||
|
zxAnProtoRateLimitIfEgress
The packet rate egress value.
0xFFFF means unconfigured. |
Integer32r/w Constraints: range: 0-10000 |
.1.3.6.1.4.1.3902.1015.3.1.21.3.1.9 |
||||||||||||||||||||
|
zxAnProtoRateLimitIfRowStatus
The row status of this entry.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.21.3.1.50 |
.1.3.6.1.4.1.3902.1015.3.1.21.4
·
1 row entry
·
11 columns
The global protocol rate limiting table. This table specifies protocol rate limiting configuration, which is used to reduce the maximum traffic rate for each protocol such as DHCP, IGMP, ICMP and so on. This table support get-next from 'zxAnProtoRateLmtIfVlanPort' index.
The vport protocol rate limiting entry.
Indexes
zxAnProtoRateLmtIfVlanRack zxAnProtoRateLmtIfVlanShelf zxAnProtoRateLmtIfVlanSlot zxAnProtoRateLmtIfVlanPort zxAnProtoRateLmtIfVlanOnu zxAnProtoRateLmtIfVlanLogicId zxAnProtoRateLmtIfVlanVlanId zxAnProtoRateLmtIfVlanProtoType
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnProtoRateLmtIfVlanRack
This object indicates the rack number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.21.4.1.1 |
||||||||||||||||||||
|
zxAnProtoRateLmtIfVlanShelf
This object indicates the shelf number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.21.4.1.2 |
||||||||||||||||||||
|
zxAnProtoRateLmtIfVlanSlot
This object indicates the slot number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.21.4.1.3 |
||||||||||||||||||||
|
zxAnProtoRateLmtIfVlanPort
This object indicates the physical port number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.21.4.1.4 |
||||||||||||||||||||
|
zxAnProtoRateLmtIfVlanOnu
This object indicates the ONU number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.21.4.1.5 |
||||||||||||||||||||
|
zxAnProtoRateLmtIfVlanLogicId
This Logical id of means vport
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.21.4.1.6 |
||||||||||||||||||||
|
zxAnProtoRateLmtIfVlanVlanId
The VLAN ID.
|
ZTE-AN-TC-MIBVlanId Textual Convention: ZTE-AN-TC-MIBVlanId Integer32Type Constraints: range: 1..4094 |
.1.3.6.1.4.1.3902.1015.3.1.21.4.1.7 |
||||||||||||||||||||
|
zxAnProtoRateLmtIfVlanProtoType
Supported Protocol Type.
|
ProtoRateLimitType Textual Convention: ProtoRateLimitType EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.21.4.1.8 |
||||||||||||||||||||
|
zxAnProtoRateLmtIfVlanIngress
The packet rate limit ingress value.
0xFFFF means unconfigured. |
Integer32r/w Constraints: range: 0-10000 |
.1.3.6.1.4.1.3902.1015.3.1.21.4.1.9 |
||||||||||||||||||||
|
zxAnProtoRateLmtIfVlanEgress
The packet rate limit egress value.
0xFFFF means unconfigured. |
Integer32r/w Constraints: range: 0-10000 |
.1.3.6.1.4.1.3902.1015.3.1.21.4.1.10 |
||||||||||||||||||||
|
zxAnProtoRateLmtIfVlanRowStatus
The row status of this entry.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.21.4.1.50 |
.1.3.6.1.4.1.3902.1015.3.1.21.50
·
1 row entry
·
4 columns
The supported protocol rate limiting table. This table specifies which kinds of information on protocol type, rate limiting scale and unit are supported for current device.
The supported protocol rate limiting entry.
Indexes
zxAnSupportedRateLimitScale zxAnSupportedProtocolType
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnSupportedRateLimitScale
Supported Protocol Rate Limiting Scale.
|
RateLimitScale Textual Convention: RateLimitScale EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.21.50.1.1 |
||||||||||||||||||||
|
zxAnSupportedProtocolType
Supported Protocol Type.
|
ProtoRateLimitType Textual Convention: ProtoRateLimitType EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.21.50.1.2 |
||||||||||||||||||||
|
zxAnSupportedRateLimitDirection
The VLAN rate limit direction.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.21.50.1.3 |
||||||||||||||||||||
|
zxAnSupportedRateLimitUnits
Supported unit type of rate for a specific protocol.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.21.50.1.4 |
zxAnIfProtocolTransTable
table.1.3.6.1.4.1.3902.1015.3.1.22.1
·
1 row entry
·
9 columns
The interface protocol transparent table. This table specifies that interface transparent transmits protocol. This table supports get-next from 'zxAnIfProtocolTransIfType' index.
The interface protocol transparent entry.
Indexes
zxAnIfProtocolTransRack zxAnIfProtocolTransShelf zxAnIfProtocolTransSlot zxAnIfProtocolTransPort zxAnIfProtocolTransOnu zxAnIfProtocolTransIfType zxAnIfProtocolTransLogicalId zxAnIfProtocolTransType
| Column | Syntax | OID | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnIfProtocolTransRack
Rack No. of the interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.22.1.1.1 |
||||||||||||||
|
zxAnIfProtocolTransShelf
Shelf No. of the interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.22.1.1.2 |
||||||||||||||
|
zxAnIfProtocolTransSlot
Slot No. of the interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.22.1.1.3 |
||||||||||||||
|
zxAnIfProtocolTransPort
Physical port No. of the interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.22.1.1.4 |
||||||||||||||
|
zxAnIfProtocolTransOnu
The ONU number. It is 0 in DSL port.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.22.1.1.5 |
||||||||||||||
|
zxAnIfProtocolTransIfType
Type of the interface.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.22.1.1.6 |
||||||||||||||
|
zxAnIfProtocolTransLogicalId
Logic index of the interface.
If zxAnIfTransProtocolIfType is 'physicalPort', its value is 0. If zxAnIfTransProtocolIfType is 'bridgePort', this object indicates 'pvc', such as oid '1' indi… |
ObjectIdentifier | .1.3.6.1.4.1.3902.1015.3.1.22.1.1.7 |
||||||||||||||
|
zxAnIfProtocolTransType
The transparent protocol type.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.22.1.1.8 |
||||||||||||||
|
zxAnIfProtocolTransRowStatus
The row status of this entry.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.22.1.1.20 |
.1.3.6.1.4.1.3902.1015.3.1.23.2
·
1 row entry
·
13 columns
This table includes the optical module threshold profile. It can be configured up to 32,which one is the default profile.
An entry in zxAnOpticalModuleAlmPrfTable.
Indexes
zxAnOptPrfModuleAlmPrfName
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnOptPrfModuleAlmPrfName
A textual string containing information about the
optical module alarm threshold profile name. It can be configured up to 32 profiles,which one is the default profile. |
OctetString Constraints: range: 1-32 |
.1.3.6.1.4.1.3902.1015.3.1.23.2.1.1 |
||||||||||||
|
zxAnOptPrfRxPwrLowerThresh
The lower limit threshold on input optical power.
The alarm should be generated when zxAnOpticalIfRxPwrCurrValue is lower than this threshold. The default value is -340. |
0.1dBmInteger32r/w Constraints: range: -400-100 |
.1.3.6.1.4.1.3902.1015.3.1.23.2.1.2 |
||||||||||||
|
zxAnOptPrfRxPwrUpperThresh
The upper limit threshold on input optical power.
The alarm should be generated when zxAnOpticalIfRxPwrCurrValue exceeds this threshold.The default value is 30. |
0.1dBmInteger32r/w Constraints: range: -400-100 |
.1.3.6.1.4.1.3902.1015.3.1.23.2.1.3 |
||||||||||||
|
zxAnOptPrfTxPwrLowerThresh
The lower limit threshold on output optical power.
The alarm should be generated when zxAnOpticalIfTxPwrCurrValue is lower than this threshold. The default value is -140. |
0.1dbmInteger32r/w Constraints: range: -200-200 |
.1.3.6.1.4.1.3902.1015.3.1.23.2.1.4 |
||||||||||||
|
zxAnOptPrfTxPwrUpperThresh
The upper limit threshold on output optical power.
The alarm should be generated when zxAnOpticalIfTxPwrCurrValue exceeds this threshold.The default value is 90. |
0.1dbmInteger32r/w Constraints: range: -200-200 |
.1.3.6.1.4.1.3902.1015.3.1.23.2.1.5 |
||||||||||||
|
zxAnOptPrfBiasCurrLowerThresh
The lower limit threshold on optical modules bias
current.The alarm should be generated when zxAnOpticalBiasCurrent is lower than this threshold. The default value is 0. |
0.1mAInteger32r/w Constraints: range: 0-1500 |
.1.3.6.1.4.1.3902.1015.3.1.23.2.1.6 |
||||||||||||
|
zxAnOptPrfBiasCurrUpperThresh
The upper limit threshold on optical modules bias current.
The alarm should be generated when zxAnOpticalBiasCurrent exceeds this threshold.The default value is 1310. |
0.1mAInteger32r/w Constraints: range: 0-1500 |
.1.3.6.1.4.1.3902.1015.3.1.23.2.1.7 |
||||||||||||
|
zxAnOptPrfVoltageLowerThresh
The lower limit threshold on optical modules supply voltage.
The alarm should be generated when zxAnOpticalSupplyVoltage is lower than this threshold.The default value is 0. |
0.1 VoltInteger32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.3902.1015.3.1.23.2.1.8 |
||||||||||||
|
zxAnOptPrfVoltageUpperThresh
The upper limit threshold on optical modules supply voltage.
The alarm should be generated when zxAnOpticalSupplyVoltage exceeds this threshold.The default value is 70. |
0.1 VoltInteger32r/w Constraints: range: 0-100 |
.1.3.6.1.4.1.3902.1015.3.1.23.2.1.9 |
||||||||||||
|
zxAnOptPrfTempLowerThresh
The lower limit threshold on optical modules temperature.
The alarm should be generated when zxAnOpticalTemperature is lower than this threshold.The default value is -45. |
CentigradeInteger32r/w Constraints: range: -50-100 |
.1.3.6.1.4.1.3902.1015.3.1.23.2.1.10 |
||||||||||||
|
zxAnOptPrfTempUpperThresh
The upper limit threshold on optical modules temperature.
The alarm should be generated when zxAnOpticalTemperature exceeds this threshold.The default value is 90. |
CentigradeInteger32r/w Constraints: range: -50-100 |
.1.3.6.1.4.1.3902.1015.3.1.23.2.1.11 |
||||||||||||
|
zxAnOptPrfOfflineTrapEnable
Indicates whether optical module is online/offline
traps should be generated for this interface.The default value is enabled(1) |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.23.2.1.12 |
||||||||||||
|
zxAnOptPrfModuleAlmPrfRowStatus
The status of this conceptual row.
The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to … |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.23.2.1.50 |
.1.3.6.1.4.1.3902.1015.3.1.23.3
·
1 row entry
·
1 columns
This table includes the optical module profile configuration.
An entry in zxAnOpticalAlmPrfIfConfTable.
Indexes
IF-MIBifIndex
| Column | Syntax | OID |
|---|---|---|
|
zxAnOpticalIfAlmPrf
A textual string containing information about the
optical module alarm threshold profile name . |
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.3902.1015.3.1.23.3.1.2 |
.1.3.6.1.4.1.3902.1015.3.1.23.4
·
1 row entry
·
4 columns
This table includes the ALS configuration of the optical module.
An entry in zxAnOpticalAlsIfConfTable.
Indexes
IF-MIBifIndex
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
zxAnOptAlsEnable
Enable or disable the ALS function.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.23.4.1.1 |
||||
|
zxAnOptAlsLaserLosDuration
This attribute specifies the value of the LOS duration.
The laser will be shutdown when detected the LOS duration longer than zxAnOptAlsLaserLosDuration value. Setting this object will enable the ALS function. |
100msInteger32r/w Constraints: range: 5-50 |
.1.3.6.1.4.1.3902.1015.3.1.23.4.1.2 |
||||
|
zxAnOptAlsLaserShutdownDuration
This attribute specifies the value of the laser shutdown
duration. Setting this object will enable the ALS function. |
100msInteger32r/w Constraints: range: 20-2000 |
.1.3.6.1.4.1.3902.1015.3.1.23.4.1.3 |
||||
|
zxAnOptAlsLaserStartUpDuration
This attribute specifies the value of the laser re-open
duration. Setting this object will enable the ALS function. |
100msInteger32r/w Constraints: range: 50-20000 |
.1.3.6.1.4.1.3902.1015.3.1.23.4.1.4 |
zxAnIfVlanCosStatsTable
table.1.3.6.1.4.1.3902.1015.3.1.24.2
·
1 row entry
·
17 columns
Interface VLAN CoS performance statistics table.
An entry in zxAnIfVlanCosStatsTable.
Indexes
zxAnIfVlanStatIfIndex zxAnIfVlanId zxAnIfVlanCos
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnIfVlanCos
An integer that is in the range of the layer 2 CoS values.
This corresponds to the 802.1p and ISL CoS values. |
Integer32 Constraints: range: 0-7 |
.1.3.6.1.4.1.3902.1015.3.1.24.2.1.1 |
||||||||||||
|
zxAnIfVlanCosStatEnable
Enable/disable the interface VLAN CoS Statisic.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.24.2.1.2 |
||||||||||||
|
zxAnIfVlanCosTxOctets
The total number of octets transmitted out of the interface,
including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.24.2.1.3 |
||||||||||||
|
zxAnIfVlanCosRxOctets
The total number of octets received on the interface, including
framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system. |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.24.2.1.4 |
||||||||||||
|
zxAnIfVlanCosTxUcastPkts
The total number of packets that higher-level protocols requested
be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. Di… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.24.2.1.5 |
||||||||||||
|
zxAnIfVlanCosRxUcastPkts
The number of packets, delivered by this sub-layer to a higher
(sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.24.2.1.6 |
||||||||||||
|
zxAnIfVlanCosTxMulticastPkts
The total number of packets that higher-level protocols requested
be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer prot… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.24.2.1.7 |
||||||||||||
|
zxAnIfVlanCosRxMulticastPkts
The number of packets, delivered by this sub-layer to a higher
(sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. … |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.24.2.1.8 |
||||||||||||
|
zxAnIfVlanCosTxBroadcastPkts
The total number of packets that higher-level protocols requested
be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in t… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.24.2.1.9 |
||||||||||||
|
zxAnIfVlanCosRxBroadcastPkts
The number of packets, delivered by this sub-layer to a higher
(sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-in… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.24.2.1.10 |
||||||||||||
|
zxAnIfVlanCosTxBWDisRatio
This object indicates the ratio of transmitted packets discarded
by this traffic processor due to subscriber bandwidth limitations. Discontinuities in the value of this counter can occur at re-initializat… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.24.2.1.11 |
||||||||||||
|
zxAnIfVlanCosRxBWDisRatio
This object indicates the ratio of received packets discarded
by this traffic processor due to subscriber bandwidth limitations. Discontinuities in the value of this counter can occur at re-initialization… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.24.2.1.12 |
||||||||||||
|
zxAnIfVlanCosTxWredDisRatio
This object indicates the ratio of transmitted packets discarded
by this traffic processor due to congestion in the queues. Discontinuities in the value of this counter can occur at re-initialization of t… |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.24.2.1.13 |
||||||||||||
|
zxAnIfVlanCosTxBandwidthDisPkts
This object indicates the number of transmitted packets discarded
by this traffic processor due to subscriber bandwidth limitations. Discontinuities in the value of this counter can occur at re-initializa… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.24.2.1.14 |
||||||||||||
|
zxAnIfVlanCosRxBandwidthDisPkts
This object indicates the number of received packets discarded
by this traffic processor due to subscriber bandwidth limitations. Discontinuities in the value of this counter can occur at re-initializatio… |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.24.2.1.15 |
||||||||||||
|
zxAnIfVlanCosTxWredDisPkts
This object indicates the number of transmitted packets discarded
by this traffic processor due to congestion in the queues. Discontinuities in the value of this counter can occur at re-initialization of … |
SNMPv2-SMICounter64 Textual Convention: SNMPv2-SMICounter64 Unsigned64Type Constraints: range: 0..18446744073709551615 |
.1.3.6.1.4.1.3902.1015.3.1.24.2.1.16 |
||||||||||||
|
zxAnIfVlanCosStatRowStatus
The status of this conceptual row.
The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to … |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.24.2.1.50 |
zxAnIfStormControlTable
table.1.3.6.1.4.1.3902.1015.3.1.25.2
·
1 row entry
·
5 columns
Interface storm control table.
A entry of zxAnIfStormControlTable.
Indexes
zxAnIfStormControlIfIndex zxAnIfStormControlPktType
| Column | Syntax | OID | ||||||
|---|---|---|---|---|---|---|---|---|
|
zxAnIfStormControlIfIndex
The index of this interface storm control table.
|
ZTE-AN-TC-MIBZxAnIfindex Textual Convention: ZTE-AN-TC-MIBZxAnIfindex Integer32 |
.1.3.6.1.4.1.3902.1015.3.1.25.2.1.1 |
||||||
|
zxAnIfStormControlPktType
Storm control packet type.
|
StormControlType Textual Convention: StormControlType EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.25.2.1.2 |
||||||
|
zxAnIfStormCtrlRateLmtIngress
The packet rate limit ingress value.
Value 0 means that the packet will be discarded. 0x7FFFFFFE means no limit. 0x7FFFFFFF means not supported. |
Integer32r/w Constraints: range: 2147483646-2147483647range: 0-65535 |
.1.3.6.1.4.1.3902.1015.3.1.25.2.1.3 |
||||||
|
zxAnIfStormCtrlRateLmtEgress
The packet rate limit egress value.
Value 0 means that the packet will be discarded. 0x7FFFFFFE means no limit. 0x7FFFFFFF means not supported. |
Integer32r/w Constraints: range: 2147483646-2147483647range: 0-65535 |
.1.3.6.1.4.1.3902.1015.3.1.25.2.1.4 |
||||||
|
zxAnIfStormCtrlRateLmtUnit
The unit of packet rate limit.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.25.2.1.5 |
.1.3.6.1.4.1.3902.1015.3.1.25.3
·
1 row entry
·
6 columns
Interface VLAN storm control table.
A entry of zxAnIfVlanStormControlTable.
Indexes
zxAnIfVlanStormControlIfIndex zxAnIfVlanStormControlVlanId zxAnIfVlanStormControlPktType
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnIfVlanStormControlIfIndex
The index of this interface VLAN storm control table.
|
ZTE-AN-TC-MIBZxAnIfindex Textual Convention: ZTE-AN-TC-MIBZxAnIfindex Integer32 |
.1.3.6.1.4.1.3902.1015.3.1.25.3.1.1 |
||||||||||||
|
zxAnIfVlanStormControlVlanId
The VLAN ID.
|
ZTE-AN-TC-MIBVlanId Textual Convention: ZTE-AN-TC-MIBVlanId Integer32Type Constraints: range: 1..4094 |
.1.3.6.1.4.1.3902.1015.3.1.25.3.1.2 |
||||||||||||
|
zxAnIfVlanStormControlPktType
Storm control packet type.
|
StormControlType Textual Convention: StormControlType EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.25.3.1.3 |
||||||||||||
|
zxAnSecStormCtrlIfVlanRateLimit
Value 0 means that the packet will be discarded.
Value 65535 means no limit. |
kbpsInteger32r/w Constraints: range: 0-65535 |
.1.3.6.1.4.1.3902.1015.3.1.25.3.1.4 |
||||||||||||
|
zxAnSecStormCtrlIfVlanBurstSize
Burst size.
|
kbyteInteger32r/w Constraints: range: 1-1023 |
.1.3.6.1.4.1.3902.1015.3.1.25.3.1.5 |
||||||||||||
|
zxAnSecStormCtrlIfVlanRowStatus
The status of this conceptual row.
The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to … |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.25.3.1.50 |
.1.3.6.1.4.1.3902.1015.3.1.26.2
·
1 row entry
·
4 columns
Interface protocol rate limit table.
A entry of zxAnProtoIfRateLimitTable.
Indexes
zxAnProtoIfRateLimitIfIndex zxAnProtoIfRateLimitProtoType
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnProtoIfRateLimitIfIndex
The index of this interface ptrotocol packet limit table.
|
ZTE-AN-TC-MIBZxAnIfindex Textual Convention: ZTE-AN-TC-MIBZxAnIfindex Integer32 |
.1.3.6.1.4.1.3902.1015.3.1.26.2.1.1 |
||||||||||||
|
zxAnProtoIfRateLimitProtoType
The protocol packet type.
|
RateLimitProtocolType Textual Convention: RateLimitProtocolType EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.26.2.1.2 |
||||||||||||
|
zxAnProtoIfRateLimitIngress
The packet rate limit ingress value.
Value 0 means that the packet will be discarded, 0x7FFFFFFE means no limit. 0x7FFFFFFF means not supported. |
kbpsInteger32r/w Constraints: range: 0-1000000range: 2147483646-2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.26.2.1.3 |
||||||||||||
|
zxAnProtoIfRateLimitEgress
The packet rate limit egress value.
Value 0 means that the packet will be discarded, 0x7FFFFFFE means no limit. 0x7FFFFFFF means not supported. |
kbpsInteger32r/w Constraints: range: 2147483646-2147483647range: 0-1000000 |
.1.3.6.1.4.1.3902.1015.3.1.26.2.1.4 |
.1.3.6.1.4.1.3902.1015.3.1.27.2
·
1 row entry
·
4 columns
Interface VLAN MAC address learned limit table.
Interface VLAN MAC address learned limit entry.
Indexes
zxAnIfVlanMacLearnedLmtIfIndex zxAnSecIfVlanMacLearnedVid
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnIfVlanMacLearnedLmtIfIndex
Interface index.
|
ZTE-AN-TC-MIBZxAnIfindex Textual Convention: ZTE-AN-TC-MIBZxAnIfindex Integer32 |
.1.3.6.1.4.1.3902.1015.3.1.27.2.1.1 |
||||||||||||
|
zxAnSecIfVlanMacLearnedVid
VLAN ID.
|
ZTE-AN-TC-MIBVlanId Textual Convention: ZTE-AN-TC-MIBVlanId Integer32Type Constraints: range: 1..4094 |
.1.3.6.1.4.1.3902.1015.3.1.27.2.1.2 |
||||||||||||
|
zxAnSecIfVlanMacLearnedMaxMacs
Maximum Learned MAC Addresses.
Value 0 mean to disable MAC address learning. |
Integer32r/w Constraints: range: 0-8192 |
.1.3.6.1.4.1.3902.1015.3.1.27.2.1.3 |
||||||||||||
|
zxAnSecIfVlanMacLearnedRowStatus
The status of this conceptual row.
The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a manager must set this object to … |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.27.2.1.50 |
zxAnIfPppoeTestTable
table.1.3.6.1.4.1.3902.1015.3.1.50.1.1
·
1 row entry
·
22 columns
The table listing PPPoE test entries. An entry indicates a test.
An entry in the zxAnIfPppoeTestTable.
Indexes
zxAnIfPppoeTestRack zxAnIfPppoeTestShelf zxAnIfPppoeTestSlot zxAnIfPppoeTestPort zxAnIfPppoeTestOnu zxAnIfPppoeTestCircuitType zxAnIfPppoeTestLogicalId
| Column | Syntax | OID | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnIfPppoeTestRack
This object indicates the rack number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.1 |
||||||||||||||||||||
|
zxAnIfPppoeTestShelf
This object indicates the shelf number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.2 |
||||||||||||||||||||
|
zxAnIfPppoeTestSlot
This object indicates the slot number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.3 |
||||||||||||||||||||
|
zxAnIfPppoeTestPort
This object indicates the physical port number.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.4 |
||||||||||||||||||||
|
zxAnIfPppoeTestOnu
When zxAnIfPppoeTestCircuitType are 'onu' or 'gemportOrLlid' or
'servicePort', this object indicates 'onu ID'. When zxAnIfPppoeTestCircuitType are 'physicalPort' or 'bridgePort', its value is '0'. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.5 |
||||||||||||||||||||
|
zxAnIfPppoeTestCircuitType
This object indicates the type of port.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.6 |
||||||||||||||||||||
|
zxAnIfPppoeTestLogicalId
This value is an oid which indicats the logical index.
When zxAnIfPppoeTestCircuitType is 'physicalPort', its value is '0'. When zxAnIfPppoeTestCircuitType is 'bridgePort', this object includes {pvc}, suc… |
ObjectIdentifier | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.7 |
||||||||||||||||||||
|
zxAnIfPppoeTestVlanId
The VLAN of interface which will be used in testing datagram.
0 means that test will use the PVID of interface. Non-zero value must be within the tagged VLAN list of interface. If can not find the VLAN in… |
Integer32r/w Constraints: range: 0-4094 |
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.8 |
||||||||||||||||||||
|
zxAnIfPppoeTestStatus
The status of test. Agent need keep this parameter updated so that
manager can get the latest status of test by polling. notStarted(1) - test is not started inProgress(2) - test is in progress success(3) … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.9 |
||||||||||||||||||||
|
zxAnIfPppoeTestFailReason
The failed reason of test.
none(1) - no error unknownError(2) - unknown error hardwareNotSupport(3) - Hardware does not support the test. notFindVlan(4) - Specified VLAN is not … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.10 |
||||||||||||||||||||
|
zxAnIfPppoeTestUserName
The user name.
|
OctetStringr/w Constraints: range: 1-64 |
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.11 |
||||||||||||||||||||
|
zxAnIfPppoeTestPassword
The password.
|
OctetStringr/w Constraints: range: 1-32 |
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.12 |
||||||||||||||||||||
|
zxAnIfPppoeTestAuthMode
The protocol that is used to anthenticate user.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.13 |
||||||||||||||||||||
|
zxAnIfPppoeTestAction
The object is used to start or stop test. The object could be
specified when creating an entry, also could be specified alone in a SET operation. start(1) - Start the test. stop(2) - Stop the test. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.14 |
||||||||||||||||||||
|
zxAnIfPppoeTestClientIpType
Client IP address type.
|
INET-ADDRESS-MIBInetAddressType Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.15 |
||||||||||||||||||||
|
zxAnIfPppoeTestClientIpAddr
The IP address that is distributed by BAS when PPPoE test is
completed successfully. |
INET-ADDRESS-MIBInetAddress Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.16 |
||||||||||||||||||||
|
zxAnIfPppoeTestBasIpType
The BAS IP address type.
|
INET-ADDRESS-MIBInetAddressType Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.17 |
||||||||||||||||||||
|
zxAnIfPppoeTestBasIpAddr
The BAS IP address.
|
INET-ADDRESS-MIBInetAddress Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.18 |
||||||||||||||||||||
|
zxAnIfPppoeTestBasMac
The BAS MAC address.
|
SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.19 |
||||||||||||||||||||
|
zxAnIfPppoeTestBasDelay
The BAS delay.
Value 0 means that the device disconnects to BAS. |
msSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.20 |
||||||||||||||||||||
|
zxAnIfPppoeTestTimeout
The PPPoE test timed out.
Value 0 means no timeout. |
secondsInteger32r/w Constraints: range: 5-60range: 0-0 |
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.21 |
||||||||||||||||||||
|
zxAnIfPppoeTestRowStatus
This object is used to create a new row or delete an existing row
in this table. Only 'createAndGo' and 'destroy' need to be supported. If test is in progress, agent should reject the 'destroy' request from manager. … |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.50 |
zxAnIfDhcpTestTable
table.1.3.6.1.4.1.3902.1015.3.1.50.2.2
·
1 row entry
·
30 columns
The table listing DHCP test entries. An entry indicates a test.
An entry in the zxAnIfDhcpTestTable.
Indexes
zxAnIfDhcpTestRack zxAnIfDhcpTestShelf zxAnIfDhcpTestSlot zxAnIfDhcpTestPort zxAnIfDhcpTestOnu zxAnIfDhcpTestIfType zxAnIfDhcpTestLogicalId
| Column | Syntax | OID | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
zxAnIfDhcpTestRack
Rack No. of the interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.1 |
||||||||||||||||||
|
zxAnIfDhcpTestShelf
Shelf No. of the interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.2 |
||||||||||||||||||
|
zxAnIfDhcpTestSlot
Slot No. of the interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.3 |
||||||||||||||||||
|
zxAnIfDhcpTestPort
Physical port No. of the interface.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.4 |
||||||||||||||||||
|
zxAnIfDhcpTestOnu
ONU No. of the interface.
It is valid only if zxAnIfDhcpTestIfType is 'ponOnu' or 'portVPort' or 'onuUni' or 'servicePort', otherwise, its value is 0. |
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.5 |
||||||||||||||||||
|
zxAnIfDhcpTestIfType
Type of the interface.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.6 |
||||||||||||||||||
|
zxAnIfDhcpTestLogicalId
Logic index of the interface.
If zxAnIfDhcpTestIfType is 'physicalPort', its value is 0. If zxAnIfDhcpTestIfType is 'bridgePort', this object indicates 'pvc', such as oid '1' indicates 'PVC… |
ObjectIdentifier | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.7 |
||||||||||||||||||
|
zxAnIfDhcpTestVlanId
The VLAN of interface which will be used in testing datagram.
0 means that test will use the PVID of interface. Non-zero value must be within the tagged VLAN list of interface. If can not find the VLAN in… |
Integer32r/w Constraints: range: 0-4094 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.8 |
||||||||||||||||||
|
zxAnIfDhcpTestStatus
The status of test. Agent need keep this parameter updated so that
manager can get the latest status of test by polling. notStarted(1) - test is not started inProgress(2) - test is in progress success(3) … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.9 |
||||||||||||||||||
|
zxAnIfDhcpTestFailReason
The failed reason of test.
none(1) - no error unknownError(2) - unknown error hardwareNotSupport(3) - Hardware does not support the test. notFindVlan(4) - Specified VLAN is … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.10 |
||||||||||||||||||
|
zxAnIfDhcpTestAction
The object is used to start or stop test. The object could be
specified when creating an entry, also could be specified alone in a SET operation. start(1) - Start the test. stop(2) - Stop the test. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.11 |
||||||||||||||||||
|
zxAnIfDhcpTestClientIpType
Client IP address type.
|
INET-ADDRESS-MIBInetAddressType Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.12 |
||||||||||||||||||
|
zxAnIfDhcpTestClientIpAddr
The IP address that is distributed by BAS when Dhcp test is
completed successfully. |
INET-ADDRESS-MIBInetAddress Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.13 |
||||||||||||||||||
|
zxAnIfDhcpTestBasIpType
The BAS IP address type.
|
INET-ADDRESS-MIBInetAddressType Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.14 |
||||||||||||||||||
|
zxAnIfDhcpTestBasIpAddr
The BAS IP address.
|
INET-ADDRESS-MIBInetAddress Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.15 |
||||||||||||||||||
|
zxAnIfDhcpTestBasMac
The BAS MAC address.
|
SNMPv2-TCMacAddress Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.16 |
||||||||||||||||||
|
zxAnIfDhcpTestBasDelay
The BAS delay.
Value 0 means that the device disconnects to BAS. |
msSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.17 |
||||||||||||||||||
|
zxAnIfDhcpTestTimeout
The DHCP test timed out.
Value 0 means no timeout. |
secondsInteger32r/w Constraints: range: 0-0range: 5-60 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.18 |
||||||||||||||||||
|
zxAnIfDhcpTestClientMac
The DHCP test client MAC address.
|
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.19 |
||||||||||||||||||
|
zxAnIfDhcpTestAuthMode
DHCP test authentication mode.
noAuth(1) - DHCP test without authentication. option60String(2) - authenticate with zxAnIfDhcpTestOption60String. usernameAndPassword(3) - authe… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.20 |
||||||||||||||||||
|
zxAnIfDhcpTestOption60String
The option60 for DHCP test.
This object is valid when zxAnIfDhcpTestAuthMode is option60String(1). |
OctetStringr/w Constraints: range: 0-128 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.21 |
||||||||||||||||||
|
zxAnIfDhcpTestUserName
The user name.
This object is valid when zxAnIfDhcpTestAuthMode is usernameAndPassword(2). |
OctetStringr/w Constraints: range: 0-64 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.22 |
||||||||||||||||||
|
zxAnIfDhcpTestPassword
The password.
This object is valid when zxAnIfDhcpTestAuthMode is usernameAndPassword(2). |
OctetStringr/w Constraints: range: 0-16 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.23 |
||||||||||||||||||
|
zxAnIfDhcpTestGatewayIpType
The gateway IP address type.
|
INET-ADDRESS-MIBInetAddressType Textual Convention: INET-ADDRESS-MIBInetAddressType EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.24 |
||||||||||||||||||
|
zxAnIfDhcpTestGatewayIpAddr
The gateway IP address.
|
INET-ADDRESS-MIBInetAddress Textual Convention: INET-ADDRESS-MIBInetAddress OctetStringType Constraints: range: 0..255 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.25 |
||||||||||||||||||
|
zxAnIfDhcpTestPingMaxDelay
The maximum delay for DHCP test ping gateway.
|
millisecondsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.26 |
||||||||||||||||||
|
zxAnIfDhcpTestPingMinDelay
The minimum delay for DHCP test ping gateway.
|
millisecondsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.27 |
||||||||||||||||||
|
zxAnIfDhcpTestPingAverageDelay
The average delay for DHCP test ping gateway .
|
millisecondsSNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.28 |
||||||||||||||||||
|
zxAnIfDhcpTestPingSuccessTimes
The successful times for DHCP test ping gateway.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.29 |
||||||||||||||||||
|
zxAnIfDhcpTestRowStatus
The status of this conceptual row.
To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot be created until the correspond… |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.50 |