zxAnIfPppoeTestRowStatus
ZTE-AN-INTERFACE-MIB ·
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.50
Object
This object is used to create a new row or delete an existing row
in this table. Only 'createAndGo' and 'destroy' need to be
supported. If test is in progress, agent should reject the 'destroy'
request from manager.
'createAndGo' means creating an entry.
'destroy' means deleting an entry.
Context
- MIB
- ZTE-AN-INTERFACE-MIB
- OID
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.50- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxAnIfPppoeTestEntry
- Table
- zxAnIfPppoeTestTable
- Siblings
- 21
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnIfPppoeTestRack This object indicates the rack number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.1 |
| zxAnIfPppoeTestFailReason The failed reason of test.
none(1) - no error
unknownError(2) - unknown error
hardwareNotSupport(3) - Hardware does not support the test.
notFin… | column | Enumeration | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.10 |
| zxAnIfPppoeTestUserName The user name. | column | OctetString | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.11 |
| zxAnIfPppoeTestPassword The password. | column | OctetString | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.12 |
| zxAnIfPppoeTestAuthMode The protocol that is used to anthenticate user. | column | Enumeration | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.13 |
| zxAnIfPppoeTestAction The object is used to start or stop test. The object could be
specified when creating an entry, also could be specified alone in a
SET operation.
start(1) - Start t… | column | Enumeration | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.14 |
| zxAnIfPppoeTestClientIpType Client IP address type. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.15 |
| zxAnIfPppoeTestClientIpAddr The IP address that is distributed by BAS when PPPoE test is
completed successfully. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.16 |
| zxAnIfPppoeTestBasIpType The BAS IP address type. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.17 |
| zxAnIfPppoeTestBasIpAddr The BAS IP address. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.18 |
| zxAnIfPppoeTestBasMac The BAS MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.19 |
| zxAnIfPppoeTestShelf This object indicates the shelf number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.2 |
| zxAnIfPppoeTestBasDelay The BAS delay.
Value 0 means that the device disconnects to BAS. | column | ms SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.20 |
| zxAnIfPppoeTestTimeout The PPPoE test timed out.
Value 0 means no timeout. | column | seconds Integer32 | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.21 |
| zxAnIfPppoeTestSlot This object indicates the slot number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.3 |
| zxAnIfPppoeTestPort This object indicates the physical port number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.4 |
| zxAnIfPppoeTestOnu When zxAnIfPppoeTestCircuitType are 'onu' or 'gemportOrLlid' or
'servicePort', this object indicates 'onu ID'.
When zxAnIfPppoeTestCircuitType are 'physicalPort' or 'bridgePort',
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.5 |
| zxAnIfPppoeTestCircuitType This object indicates the type of port. | column | Enumeration | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.6 |
| zxAnIfPppoeTestLogicalId This value is an oid which indicats the logical index.
When zxAnIfPppoeTestCircuitType is 'physicalPort', its value is '0'.
When zxAnIfPppoeTestCircuitType is 'brid… | column | ObjectIdentifier | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.7 |
| zxAnIfPppoeTestVlanId The VLAN of interface which will be used in testing datagram.
0 means that test will use the PVID of interface.
Non-zero value must be within the tagged VLAN list o… | column | Integer32 | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.8 |
| zxAnIfPppoeTestStatus The status of test. Agent need keep this parameter updated so that
manager can get the latest status of test by polling.
notStarted(1) - test is not started
inProgr… | column | Enumeration | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.9 |