zxAnIfDhcpTestAuthMode
ZTE-AN-INTERFACE-MIB ·
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.20
Object
column
r/w
Enumeration
DHCP test authentication mode.
noAuth(1) - DHCP test without authentication.
option60String(2) - authenticate with
zxAnIfDhcpTestOption60String.
usernameAndPassword(3) - authenticate with zxAnIfDhcpTestUserName
and zxAnIfDhcpTestPassword.
Context
- MIB
- ZTE-AN-INTERFACE-MIB
- OID
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.20- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxAnIfDhcpTestEntry
- Table
- zxAnIfDhcpTestTable
- Siblings
- 29
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | noAuth |
2 | option60String |
3 | usernameAndPassword |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnIfDhcpTestRack Rack No. of the interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.1 |
| zxAnIfDhcpTestFailReason The failed reason of test.
none(1) - no error
unknownError(2) - unknown error
hardwareNotSupport(3) - Hardware does not support the test.
not… | column | Enumeration | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.10 |
| zxAnIfDhcpTestAction The object is used to start or stop test. The object could be
specified when creating an entry, also could be specified alone in a
SET operation.
start(1) - Start t… | column | Enumeration | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.11 |
| zxAnIfDhcpTestClientIpType Client IP address type. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.12 |
| zxAnIfDhcpTestClientIpAddr The IP address that is distributed by BAS when Dhcp test is
completed successfully. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.13 |
| zxAnIfDhcpTestBasIpType The BAS IP address type. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.14 |
| zxAnIfDhcpTestBasIpAddr The BAS IP address. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.15 |
| zxAnIfDhcpTestBasMac The BAS MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.16 |
| zxAnIfDhcpTestBasDelay The BAS delay.
Value 0 means that the device disconnects to BAS. | column | ms SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.17 |
| zxAnIfDhcpTestTimeout The DHCP test timed out.
Value 0 means no timeout. | column | seconds Integer32 | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.18 |
| zxAnIfDhcpTestClientMac The DHCP test client MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.19 |
| zxAnIfDhcpTestShelf Shelf No. of the interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.2 |
| zxAnIfDhcpTestOption60String The option60 for DHCP test.
This object is valid when zxAnIfDhcpTestAuthMode is
option60String(1). | column | OctetString | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.21 |
| zxAnIfDhcpTestUserName The user name.
This object is valid when zxAnIfDhcpTestAuthMode is
usernameAndPassword(2). | column | OctetString | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.22 |
| zxAnIfDhcpTestPassword The password.
This object is valid when zxAnIfDhcpTestAuthMode is
usernameAndPassword(2). | column | OctetString | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.23 |
| zxAnIfDhcpTestGatewayIpType The gateway IP address type. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.24 |
| zxAnIfDhcpTestGatewayIpAddr The gateway IP address. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.25 |
| zxAnIfDhcpTestPingMaxDelay The maximum delay for DHCP test ping gateway. | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.26 |
| zxAnIfDhcpTestPingMinDelay The minimum delay for DHCP test ping gateway. | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.27 |
| zxAnIfDhcpTestPingAverageDelay The average delay for DHCP test ping gateway . | column | milliseconds SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.28 |
| zxAnIfDhcpTestPingSuccessTimes The successful times for DHCP test ping gateway. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.29 |
| zxAnIfDhcpTestSlot Slot No. of the interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.3 |
| zxAnIfDhcpTestPort Physical port No. of the interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.4 |
| zxAnIfDhcpTestOnu ONU No. of the interface.
It is valid only if zxAnIfDhcpTestIfType is 'ponOnu' or
'portVPort' or 'onuUni' or 'servicePort', otherwise, its value
is 0. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.5 |
| zxAnIfDhcpTestRowStatus The status of this conceptual row.
To create a row in this table, a manager must
set this object to createAndGo(4).
In particular, a newly created ro… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.50 |
| zxAnIfDhcpTestIfType Type of the interface. | column | Enumeration | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.6 |
| zxAnIfDhcpTestLogicalId Logic index of the interface.
If zxAnIfDhcpTestIfType is 'physicalPort', its value is 0.
If zxAnIfDhcpTestIfType is 'bridgePort', this object
indicat… | column | ObjectIdentifier | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.7 |
| zxAnIfDhcpTestVlanId The VLAN of interface which will be used in testing datagram.
0 means that test will use the PVID of interface.
Non-zero value must be within the tagged VLAN list o… | column | Integer32 | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.8 |
| zxAnIfDhcpTestStatus The status of test. Agent need keep this parameter updated so that
manager can get the latest status of test by polling.
notStarted(1) - test is not started
inProgr… | column | Enumeration | .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.9 |