zxAnIfDhcpTestLogicalId

ZTE-AN-INTERFACE-MIB · .1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.7
MIB view Table view

Object

column ObjectIdentifier 
Logic index of the interface.
              
If zxAnIfDhcpTestIfType is 'physicalPort', its value is 0.
              
If zxAnIfDhcpTestIfType is 'bridgePort', this object
indicates 'pvc', such as oid '1' indicates 'PVC1'.
              
If zxAnIfDhcpTestIfType is 'ponOnu', its value is 0.
              
If zxAnIfDhcpTestIfType is 'ponVPort', this object
indicates 'ponVPort', such as oid '1' indicates 'PortVPort1'.
              
If zxAnIfDhcpTestIfType is 'onuUni', this object
indicates 'onuSlot.uniId', this type is used for SFUs only.
If the ONU slot is not cared about, the onuSlot is 0,
such as oid '0.1' indicates 'ONUSlot0.UNIID1'.
              
If zxAnIfDhcpTestIfType is 'servicePort', this object
indicates 'servicePort', such as oid '1' indicates 'ServicePort1'.

Context

MIB
ZTE-AN-INTERFACE-MIB
OID
.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.7
Type
column
Access
noaccess
Status
current
Parent
zxAnIfDhcpTestEntry
Table
zxAnIfDhcpTestTable
Siblings
29

Syntax

ObjectIdentifier

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zxAnIfDhcpTestRack
Rack No. of the interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.1
zxAnIfDhcpTestFailReason
The failed reason of test. none(1) - no error unknownError(2) - unknown error hardwareNotSupport(3) - Hardware does not support the test. not…
columnEnumeration.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.10
zxAnIfDhcpTestAction
The object is used to start or stop test. The object could be specified when creating an entry, also could be specified alone in a SET operation. start(1) - Start t…
columnEnumeration.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.11
zxAnIfDhcpTestClientIpType
Client IP address type.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.12
zxAnIfDhcpTestClientIpAddr
The IP address that is distributed by BAS when Dhcp test is completed successfully.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.13
zxAnIfDhcpTestBasIpType
The BAS IP address type.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.14
zxAnIfDhcpTestBasIpAddr
The BAS IP address.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.15
zxAnIfDhcpTestBasMac
The BAS MAC address.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.16
zxAnIfDhcpTestBasDelay
The BAS delay. Value 0 means that the device disconnects to BAS.
columnms SNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.17
zxAnIfDhcpTestTimeout
The DHCP test timed out. Value 0 means no timeout.
columnseconds Integer32.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.18
zxAnIfDhcpTestClientMac
The DHCP test client MAC address.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.19
zxAnIfDhcpTestShelf
Shelf No. of the interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.2
zxAnIfDhcpTestAuthMode
DHCP test authentication mode. noAuth(1) - DHCP test without authentication. option60String(2) - authenticate with zxAnIfDhcpTestOption…
columnEnumeration.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.20
zxAnIfDhcpTestOption60String
The option60 for DHCP test. This object is valid when zxAnIfDhcpTestAuthMode is option60String(1).
columnOctetString.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.21
zxAnIfDhcpTestUserName
The user name. This object is valid when zxAnIfDhcpTestAuthMode is usernameAndPassword(2).
columnOctetString.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.22
zxAnIfDhcpTestPassword
The password. This object is valid when zxAnIfDhcpTestAuthMode is usernameAndPassword(2).
columnOctetString.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.23
zxAnIfDhcpTestGatewayIpType
The gateway IP address type.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.24
zxAnIfDhcpTestGatewayIpAddr
The gateway IP address.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.25
zxAnIfDhcpTestPingMaxDelay
The maximum delay for DHCP test ping gateway.
columnmilliseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.26
zxAnIfDhcpTestPingMinDelay
The minimum delay for DHCP test ping gateway.
columnmilliseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.27
zxAnIfDhcpTestPingAverageDelay
The average delay for DHCP test ping gateway .
columnmilliseconds SNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.28
zxAnIfDhcpTestPingSuccessTimes
The successful times for DHCP test ping gateway.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.29
zxAnIfDhcpTestSlot
Slot No. of the interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.3
zxAnIfDhcpTestPort
Physical port No. of the interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.4
zxAnIfDhcpTestOnu
ONU No. of the interface. It is valid only if zxAnIfDhcpTestIfType is 'ponOnu' or 'portVPort' or 'onuUni' or 'servicePort', otherwise, its value is 0.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.5
zxAnIfDhcpTestRowStatus
The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created ro…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.50
zxAnIfDhcpTestIfType
Type of the interface.
columnEnumeration.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.6
zxAnIfDhcpTestVlanId
The VLAN of interface which will be used in testing datagram. 0 means that test will use the PVID of interface. Non-zero value must be within the tagged VLAN list o…
columnInteger32.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.8
zxAnIfDhcpTestStatus
The status of test. Agent need keep this parameter updated so that manager can get the latest status of test by polling. notStarted(1) - test is not started inProgr…
columnEnumeration.1.3.6.1.4.1.3902.1015.3.1.50.2.2.1.9