zxAnIfPppoeTestAction

ZTE-AN-INTERFACE-MIB · .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.14
MIB view Table view

Object

column r/w Enumeration 
The object is used to start or stop test. The object could be
specified when creating an entry, also could be specified alone in a
SET operation.
              
start(1) - Start the test.
stop(2)  - Stop the test.

Context

MIB
ZTE-AN-INTERFACE-MIB
OID
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.14
Type
column
Access
readwrite
Status
current
Parent
zxAnIfPppoeTestEntry
Table
zxAnIfPppoeTestTable
Siblings
21

Syntax

Enumeration

Values & Constraints

Enumerated Values
1start
2stop

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
zxAnIfPppoeTestRack
This object indicates the rack number.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.1
zxAnIfPppoeTestFailReason
The failed reason of test. none(1) - no error unknownError(2) - unknown error hardwareNotSupport(3) - Hardware does not support the test. notFin…
columnEnumeration.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.10
zxAnIfPppoeTestUserName
The user name.
columnOctetString.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.11
zxAnIfPppoeTestPassword
The password.
columnOctetString.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.12
zxAnIfPppoeTestAuthMode
The protocol that is used to anthenticate user.
columnEnumeration.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.13
zxAnIfPppoeTestClientIpType
Client IP address type.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.15
zxAnIfPppoeTestClientIpAddr
The IP address that is distributed by BAS when PPPoE test is completed successfully.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.16
zxAnIfPppoeTestBasIpType
The BAS IP address type.
columnINET-ADDRESS-MIBInetAddressType.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.17
zxAnIfPppoeTestBasIpAddr
The BAS IP address.
columnINET-ADDRESS-MIBInetAddress.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.18
zxAnIfPppoeTestBasMac
The BAS MAC address.
columnSNMPv2-TCMacAddress.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.19
zxAnIfPppoeTestShelf
This object indicates the shelf number.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.2
zxAnIfPppoeTestBasDelay
The BAS delay. Value 0 means that the device disconnects to BAS.
columnms SNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.20
zxAnIfPppoeTestTimeout
The PPPoE test timed out. Value 0 means no timeout.
columnseconds Integer32.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.21
zxAnIfPppoeTestSlot
This object indicates the slot number.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.3
zxAnIfPppoeTestPort
This object indicates the physical port number.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.4
zxAnIfPppoeTestOnu
When zxAnIfPppoeTestCircuitType are 'onu' or 'gemportOrLlid' or 'servicePort', this object indicates 'onu ID'. When zxAnIfPppoeTestCircuitType are 'physicalPort' or 'bridgePort', …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.5
zxAnIfPppoeTestRowStatus
This object is used to create a new row or delete an existing row in this table. Only 'createAndGo' and 'destroy' need to be supported. If test is in progress, agent should reject…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.50
zxAnIfPppoeTestCircuitType
This object indicates the type of port.
columnEnumeration.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.6
zxAnIfPppoeTestLogicalId
This value is an oid which indicats the logical index. When zxAnIfPppoeTestCircuitType is 'physicalPort', its value is '0'. When zxAnIfPppoeTestCircuitType is 'brid…
columnObjectIdentifier.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.7
zxAnIfPppoeTestVlanId
The VLAN of interface which will be used in testing datagram. 0 means that test will use the PVID of interface. Non-zero value must be within the tagged VLAN list o…
columnInteger32.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.8
zxAnIfPppoeTestStatus
The status of test. Agent need keep this parameter updated so that manager can get the latest status of test by polling. notStarted(1) - test is not started inProgr…
columnEnumeration.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.9