zxAnIfPppoeTestOnu
ZTE-AN-INTERFACE-MIB ·
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.5
Object
column
SNMPv2-SMIInteger32
When zxAnIfPppoeTestCircuitType are 'onu' or 'gemportOrLlid' or 'servicePort', this object indicates 'onu ID'. When zxAnIfPppoeTestCircuitType are 'physicalPort' or 'bridgePort', its value is '0'.
Context
- MIB
- ZTE-AN-INTERFACE-MIB
- OID
.1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.5- Type
- column
- Access
- noaccess
- Status
- current
- Parent
- zxAnIfPppoeTestEntry
- Table
- zxAnIfPppoeTestTable
- Siblings
- 21
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnIfPppoeTestRack This object indicates the rack number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.1 |
| zxAnIfPppoeTestFailReason The failed reason of test.
none(1) - no error
unknownError(2) - unknown error
hardwareNotSupport(3) - Hardware does not support the test.
notFin… | column | Enumeration | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.10 |
| zxAnIfPppoeTestUserName The user name. | column | OctetString | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.11 |
| zxAnIfPppoeTestPassword The password. | column | OctetString | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.12 |
| zxAnIfPppoeTestAuthMode The protocol that is used to anthenticate user. | column | Enumeration | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.13 |
| zxAnIfPppoeTestAction The object is used to start or stop test. The object could be
specified when creating an entry, also could be specified alone in a
SET operation.
start(1) - Start t… | column | Enumeration | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.14 |
| zxAnIfPppoeTestClientIpType Client IP address type. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.15 |
| zxAnIfPppoeTestClientIpAddr The IP address that is distributed by BAS when PPPoE test is
completed successfully. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.16 |
| zxAnIfPppoeTestBasIpType The BAS IP address type. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.17 |
| zxAnIfPppoeTestBasIpAddr The BAS IP address. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.18 |
| zxAnIfPppoeTestBasMac The BAS MAC address. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.19 |
| zxAnIfPppoeTestShelf This object indicates the shelf number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.2 |
| zxAnIfPppoeTestBasDelay The BAS delay.
Value 0 means that the device disconnects to BAS. | column | ms SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.20 |
| zxAnIfPppoeTestTimeout The PPPoE test timed out.
Value 0 means no timeout. | column | seconds Integer32 | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.21 |
| zxAnIfPppoeTestSlot This object indicates the slot number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.3 |
| zxAnIfPppoeTestPort This object indicates the physical port number. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.4 |
| zxAnIfPppoeTestRowStatus This object is used to create a new row or delete an existing row
in this table. Only 'createAndGo' and 'destroy' need to be
supported. If test is in progress, agent should reject… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.50 |
| zxAnIfPppoeTestCircuitType This object indicates the type of port. | column | Enumeration | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.6 |
| zxAnIfPppoeTestLogicalId This value is an oid which indicats the logical index.
When zxAnIfPppoeTestCircuitType is 'physicalPort', its value is '0'.
When zxAnIfPppoeTestCircuitType is 'brid… | column | ObjectIdentifier | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.7 |
| zxAnIfPppoeTestVlanId The VLAN of interface which will be used in testing datagram.
0 means that test will use the PVID of interface.
Non-zero value must be within the tagged VLAN list o… | column | Integer32 | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.8 |
| zxAnIfPppoeTestStatus The status of test. Agent need keep this parameter updated so that
manager can get the latest status of test by polling.
notStarted(1) - test is not started
inProgr… | column | Enumeration | .1.3.6.1.4.1.3902.1015.3.1.50.1.1.1.9 |