zxAnEtherIfStatReset
ZTE-AN-INTERFACE-MIB ·
.1.3.6.1.4.1.3902.1015.3.1.3.1.100
Object
column
r/w
Enumeration
Reset interface statistics counter manually when it is set to '1'.
Context
- MIB
- ZTE-AN-INTERFACE-MIB
- OID
.1.3.6.1.4.1.3902.1015.3.1.3.1.100- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- zxAnEtherIfStatEntry
- Table
- zxAnEtherIfStatTable
- Siblings
- 32
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | resetCounter |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| zxAnEtherIfStatFCSErrors The FCSErrors counter of ethernet-like interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.1 |
| zxAnEtherIfOutOctetPeakRate The interface's peak transmitted bandwidth in bytes per second.
If the bandwidth of the interface is greater than the maximum value
reportable by this object then this object sho… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.10 |
| zxAnEtherIfInOctetRate An estimate of the interface's current received bandwidth in bytes
per second.
For interfaces which do not vary in bandwidth or for those where no
accurate estimation can be made… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.11 |
| zxAnEtherIfInPktRate An estimate of the interface's current received bandwidth
in packets per second. For interfaces which do not vary in bandwidth or for
those where no accurate estimation can be m… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.12 |
| zxAnEtherIfInBandwidthUtil An estimate of the interface's current received bandwidth
utilization.
The value is between 0 to 100. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.13 |
| zxAnEtherIfInDiscardPktRatio An estimate of the interface's discarded packets ratio received.
When bit 3 of zxAnInterfaceMgmtCapabilities is 0, the unit is 1%.
When bit 3 of zxAnInterfaceMgmtCa… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.14 |
| zxAnEtherIfInOctetPeakRate The interface's peak received bandwidth in bytes per second.
If the bandwidth of the interface is greater than the maximum value
reportable by this object then this object should … | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.15 |
| zxAnEtherIfInErrPktRatio An estimate of the interface's received error packets ratio.
The value equals (recevied error packets / total received packets)
* 100%. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.16 |
| zxAnEtherIfOutBwUtilThresh The threshold of zxAnEtherIfOutBandwidthUtil.
When it exceeds this threshold, the zxAnEtherIfOutBwUtilThreshAlarm
trap should be generated.
If zxAnEtherIfOutBandwidthUtil always e… | column | Integer32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.17 |
| zxAnEtherIfInBandwidthUtilThresh The threshold of zxAnEtherIfInBandwidthUtil.
When it exceeds this threshold, the zxAnEtherIfInBwUtilThreshAlarm
trap should be generated.
If zxAnEtherIfInBandwidthUtil always exc… | column | Integer32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.18 |
| zxAnEtherIfOutPkts The total number of packets that higher-level protocols requested
be transmitted.
Discontinuities in the value of this counter can occur at
re-initialization of th… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3902.1015.3.1.3.1.19 |
| zxAnEtherIfStat15minFCSErrors The current 15 mininutes FCSErrors counter of ethernet-like
interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.2 |
| zxAnEtherIfInOctetsCorrect The total number of correct octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur at
re-initializat… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3902.1015.3.1.3.1.20 |
| zxAnEtherIfOutOctetsCorrect The total number of correct octets transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur at
re-ini… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3902.1015.3.1.3.1.21 |
| zxAnEtherIfInOctetsError The total number of error octets received on the interface,
including framing characters.
Discontinuities in the value of this counter can occur at
re-initializati… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3902.1015.3.1.3.1.22 |
| zxAnEtherIfOutOctetsError The total number of error octets transmitted out of the
interface, including framing characters.
Discontinuities in the value of this counter can occur at
re-initi… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3902.1015.3.1.3.1.23 |
| zxAnEthIfStat1SecFcsErrs The current 1 second FCSErrors counter of ethernet-like interface. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3902.1015.3.1.3.1.24 |
| zxAnEthIfStat1SecFcsErrsThresh The threshold of zxAnEthIfStat1SecFcsErrs.
When it exceeds this threshold, the zxAnEthIf1SecFcsErrsThreshAlm
trap should be generated.
If zxAnEthIfStat1SecFcsErrs always exceeds… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.25 |
| zxAnEtherIfStatOutDiscardPkt The number of outbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being
transmitted.
One possible reason for discarding s… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3902.1015.3.1.3.1.26 |
| zxAnEtherIfStatInDiscardPkt The number of inbound packets which were chosen to be discarded
even though no errors had been detected to prevent their being
deliverable to a higher-layer protocol.
One possib… | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3902.1015.3.1.3.1.27 |
| zxAnEtherIfInPkts The total number of received packets.
Discontinuities in the value of this counter can occur at
re-initialization of the management system. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.3902.1015.3.1.3.1.28 |
| zxAnEtherIfStatEs Counter of errored seconds. | column | seconds SNMPv2-SMICounter64 | .1.3.6.1.4.1.3902.1015.3.1.3.1.29 |
| zxAnEtherIf15minFcsErrsThresh The threshold of zxAnEtherIfStat15minFCSErrors. When it exceeds
this threshold, the zxAnEtherIf15minFcsErrsThreshAlm trap should be
generated.
If zxAnEtherIfStat15minFCSErrors al… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.3 |
| zxAnEtherIfStatSes Counter of severely errored seconds. | column | seconds SNMPv2-SMICounter64 | .1.3.6.1.4.1.3902.1015.3.1.3.1.30 |
| zxAnEtherIfStatUas Counter of unavailable seconds. | column | seconds SNMPv2-SMICounter64 | .1.3.6.1.4.1.3902.1015.3.1.3.1.31 |
| zxAnEtherIfStatLoss Counter of loss of signal seconds. | column | seconds SNMPv2-SMICounter64 | .1.3.6.1.4.1.3902.1015.3.1.3.1.32 |
| zxAnEtherIfStat1dayFCSErrors The 1 day FCSErrors counter of ethernet-like interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.4 |
| zxAnEtherIf1dayFcsErrsThresh The threshold of zxAnEtherIfStat1dayFCSErrors. When it exceeds this
threshold,the zxAnEtherIf1dayFcsErrsThreshAlm trap should be
generated.
If zxAnEtherIfStat1dayFCSErrors always… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.5 |
| zxAnEtherIfOutOctetRate An estimate of the interface's current transmitted bandwidth in
bytes per second.
For interfaces which do not vary in bandwidth or for those where no
accurate estimation can be … | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.6 |
| zxAnEtherIfOutPktRate An estimate of the interface's current transmitted bandwidth in
packets per second.
For interfaces which do not vary in bandwidth or for those where no
accurate estimation can be… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.7 |
| zxAnEtherIfOutBandwidthUtil An estimate of the interface's current transmitted bandwidth
utilization. The value is between 0 to 100. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.8 |
| zxAnEtherIfOutDiscardPktRatio An estimate of the interface's discarded packets ratio being
transmitted.
When bit 3 of zxAnInterfaceMgmtCapabilities is 0, the unit is 1%.
When bit 3 of zxAnInter… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3902.1015.3.1.3.1.9 |