ZHONE-PHY-WTN-RADIO-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
33

wtnConfigTable

table
.1.3.6.1.4.1.5504.5.8.1 · 1 row entry · 18 columns
Open in standard view 
Radio, modem and ODU configuration information.  An entry 
is automatically created for each radio/modem/ODU 
interface.
wtnConfigEntry entry .1.3.6.1.4.1.5504.5.8.1.1
Configuration entries
Indexes
wtnRadioIfIndex
Column Syntax OID
wtnRadioIfIndex
This object should be made equal to the Ifindex used for
the radio interface.
IF-MIBInterfaceIndex
Textual Convention: IF-MIBInterfaceIndex Integer32
Type Constraints:
range: 1..2147483647
 .1.3.6.1.4.1.5504.5.8.1.1.1
wtnActiveChannelNumber
Assigns one of N allowed frequency pairs for the radio
transmitter and reciever as described in zhoneRadio-TC.mib.

5.7Ghz family (sysObjId) systems:
---------------------------------
Writing to this valu…
ZHONE-RADIO-TC-MIBSkyZhoneRadioChannelNumberr/w
Textual Convention: ZHONE-RADIO-TC-MIBSkyZhoneRadioChannelNumber Integer32
 .1.3.6.1.4.1.5504.5.8.1.1.2
wtnActiveTransmitFrequency
Current transmit frequency. As described in zhoneRadio-TC.mib.


23Ghz family: ( according to sysObjId )
-------------------------------------------
The transmit frequency is entered as a…
HzZHONE-RADIO-TC-MIBSkyZhoneScientificNotationr/w
Textual Convention: ZHONE-RADIO-TC-MIBSkyZhoneScientificNotation OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.5504.5.8.1.1.3
wtnStandbyChannelNumber
Assigns one of N allowed standby frequency pairs to the radio
transmitter and reciever as described in zhoneRadio-TC.mib.

5.7Ghz family (sysObjId) systems:
---------------------------------
Selection of …
ZHONE-RADIO-TC-MIBSkyZhoneRadioChannelNumberr/w
Textual Convention: ZHONE-RADIO-TC-MIBSkyZhoneRadioChannelNumber Integer32
 .1.3.6.1.4.1.5504.5.8.1.1.4
wtnStandbyTransmitFrequency
Standby Transmit frequency as described in zhoneRadio-TC.mib.


23Ghz family: ( according to sysObjId )
-------------------------------------------
If auto-switching is enabled, the
frequ…
HzZHONE-RADIO-TC-MIBSkyZhoneScientificNotationr/w
Textual Convention: ZHONE-RADIO-TC-MIBSkyZhoneScientificNotation OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.5504.5.8.1.1.5
wtnAutoChannelSwitchEnable
true(1) - allows radio to automatically switch
to the standby channel in case of active channel
interference.

false(2) - inhibits radio from automatically
switching to the standby channel.
…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.5504.5.8.1.1.6
wtnChannelSeparation
23Ghz family (sysObjId) systems:
---------------------------------
Channel separation - the fixed difference between transmit
and receive frequency.

Only three values are allowed: s1232MHz(1), s1200MHz,
…
Enumerationr/w
Enumerated Values:
0na
1s1232MHz
2s1200MHz
3s1008MHz
 .1.3.6.1.4.1.5504.5.8.1.1.7
wtnRadioAmplifiersEnable
true(1) - Enables amplifiers for transmitter and receiver.
The radio will begin transmitting and receiving data. If the ODU
is looped back, unable to lock onto a signal, or the ODU equipment
has failed, the enable com…
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.5504.5.8.1.1.8
wtnRxBERThresh
Set point of BER alarm. When the modem BER estimate
is higher than this value, a modem BER alarm will occur.
The BER over threshold Causes trap wtnBerAlarm to be emitted.
The alarm will stay present until the modem BER…
ZHONE-RADIO-TC-MIBSkyZhoneScientificNotationr/w
Textual Convention: ZHONE-RADIO-TC-MIBSkyZhoneScientificNotation OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.5504.5.8.1.1.9
wtnRxBERHysteresisWindow
After a wtnBerAlarm trap is sent, it is revoked using the same trap with
the condition flag set to false when the modem BER estimate is lower
than the set point wtnModemRxBERThresh less this value.

Valid…
ZHONE-RADIO-TC-MIBSkyZhoneScientificNotationr/w
Textual Convention: ZHONE-RADIO-TC-MIBSkyZhoneScientificNotation OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.5504.5.8.1.1.10
wtnAntennaSize
Initial power of transmitter is based upon antenna diameter.

oneFoot(1) - a one foot dish
twoFeet(2) - a two foot dish
fourFeet(4) - a four foot dish
sixFeet(6) - a six foot dish

FCC mandat…
feetEnumerationr/w
Enumerated Values:
1oneFoot
2twoFeet
4fourFeet
6sixFeet
 .1.3.6.1.4.1.5504.5.8.1.1.11
wtnIduOduCableLength
The length of the coaxial cable between the Indoor
Unit and the Outdoor Unit.

Used internally to compensate for the coaxial cable's
natural attenuation of the signal.

This cable is cut to i…
feetInteger32r/w
Constraints:
range: 0-300
 .1.3.6.1.4.1.5504.5.8.1.1.12
wtnRssiThresh
Set point of RSSI thresholdalarm. When the ODU RSSI estimate
is lower than this value, a wtnRssiDeviation trap will be emitted.
When the ODU RSSI estimate is higher than this set point
plus the hysteresis window wtnOd…
dBInteger32r/w
Constraints:
range: -99--30
 .1.3.6.1.4.1.5504.5.8.1.1.13
wtnRssiHysteresisWindow
After a wtnRssiDeviation Trap is sent, an the trap is re-emitted
with the condition flag set to false when the ODU RSSI
estimate is higher than the set point wtnOduRxRSSIThresh plus this value.

Typical v…
dBSNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.5.8.1.1.14
wtnTrapsEnable
When true(1), radio traps may be emitted.
When false(2), radio traps will be absorbed.

Default value is true(1) = enabled.
SNMPv2-TCTruthValuer/w
Textual Convention: SNMPv2-TCTruthValue Enumeration
Type Values:
1true
2false
 .1.3.6.1.4.1.5504.5.8.1.1.15
wtnOduLoopback
loopbackOn(1) - engages the loopback function at the ODU (outdoor unit).
Data normally transmitted by the radio is instead returned to the IDU
(indoor unit). This is useful to check the integrity of the IDU, the
integr…
Enumerationr/w
Enumerated Values:
1loopbackOn
2loopbackOff
 .1.3.6.1.4.1.5504.5.8.1.1.16
wtnOduIdentifier
Textual description of ODU.
This string typically identifies the location of antenna.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.5504.5.8.1.1.17
wtnTxLevel
Desired transmitter signal strength (TSSI) at antenna.
Note: Accuracy decreases as power levels decrease below 20dBm.
FCC maximum power allowed is +30dBm.
dBInteger32r/w
Constraints:
range: 0-45
 .1.3.6.1.4.1.5504.5.8.1.1.18

wtnStatusTable

table
.1.3.6.1.4.1.5504.5.8.2 · 1 row entry · 6 columns
Open in standard view 
Contains the status of the Radio, ODU and Modem.
wtnStatusEntry entry .1.3.6.1.4.1.5504.5.8.2.1
Entries for radio, ODU and modem status.
Indexes
No indexes recorded
Column Syntax OID
wtnCriticalAlarmStatus
Current radio alarm status details.


BIT Hex Decimal BIT NAME
Number Value Value
------ ------ ------- ----------------------
0 0x01 1 RSSI_DEVIATION
1 0…
Bits
Enumerated Values:
0rssiDeviation
1iduOOL
2oduTempAlert
3rxBerAlarm
4rxEbnoAlarm
5unused5
6unused6
7unused7
8iduEquipFail
9oduEquipFail
10iduOduLinkFail
11mcChannelFail
12unused12
13unused13
14unused14
15serviceAffected
 .1.3.6.1.4.1.5504.5.8.2.1.1
wtnCriticalAlarmStatusLastChange
Time Stamp of last change of critical alarm status
wtnRadioCriticalAlmStatus.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.5504.5.8.2.1.2
wtnMinorAlarmStatus
Current radio alarm status details.

BIT Hex Decimal BIT NAME
Number Value Value
------ ------ ------- ----------------------
0 0x01 1 RSSI_DEVIATION
1 0x02 2 …
Bits
Enumerated Values:
0rssiDeviation
1iduOOL
2oduTempAlert
3rxBerAlarm
4rxEbnoAlarm
5unused5
6unused6
7unused7
8iduEquipFail
9oduEquipFail
10iduOduLinkFail
11mcChannelFail
12unused12
13unused13
14unused14
15serviceAffected
 .1.3.6.1.4.1.5504.5.8.2.1.3
wtnMinorAlarmStatusLastChange
Time Stamp of last change of minor alarm status
wtnRadioMinorAlmStatus.
SNMPv2-TCTimeStamp
Textual Convention: SNMPv2-TCTimeStamp Unsigned32
 .1.3.6.1.4.1.5504.5.8.2.1.4
wtnOduTemperature
Current temperature measured at local outdoor unit, in
degrees Celsius (Centigrade).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.5504.5.8.2.1.5
wtnReceiveFrequency
Current frequency at which radio receiver is set.
HzZHONE-RADIO-TC-MIBSkyZhoneScientificNotation
Textual Convention: ZHONE-RADIO-TC-MIBSkyZhoneScientificNotation OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.5504.5.8.2.1.6

wtnInfoTable

table
.1.3.6.1.4.1.5504.5.8.3 · 1 row entry · 2 columns
Open in standard view 
Table augments the wtnConfigTable
wtnInfoEntry entry .1.3.6.1.4.1.5504.5.8.3.1
Device information entries for the radio, modem and ODU.
Indexes
No indexes recorded
Column Syntax OID
wtnOduSerialNumber
Manufacturing Serial Number for Outdoor Unit.
Format of the serial number is XXXXX, where X = 0 to F.
Zhone-TCZhoneAdminString
Textual Convention: Zhone-TCZhoneAdminString OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.5504.5.8.3.1.1
wtnOduMfgCLEICode
CLEI code for Outdoor Unit.
Zhone-TCZhoneAdminString
Textual Convention: Zhone-TCZhoneAdminString OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.5504.5.8.3.1.2

wtnSnapshotTable

table
.1.3.6.1.4.1.5504.5.8.4 · 1 row entry · 4 columns
Open in standard view 
Table to collect statistics at radio demodulator of 
wireless transport node.
wtnSnapshotEntry entry .1.3.6.1.4.1.5504.5.8.4.1
Entry into wireless transport local radio status table.
No rows may be added to this table.
Indexes
No indexes recorded
Column Syntax OID
wtnRSSI
Current Received Signal Strength in dB as registered at
the near end Outdoor Unit. This number is updated about once per
second.

Typical values range from -95dB to -30dB.
Tyipcal nominal value is -60dB.
dBmInteger32
Constraints:
range: -90-0
 .1.3.6.1.4.1.5504.5.8.4.1.1
wtnTSSI
Estimated transmitter signal strength (TSSI) at antenna.
Note: maximum level allowed by FCC is 30dBm.
dBmInteger32
Constraints:
range: 0-45
 .1.3.6.1.4.1.5504.5.8.4.1.2
wtnRxBerFloat
Current received BER at local Indoor Unit demodulator over
the previous 250ms.
ZHONE-RADIO-TC-MIBSkyZhoneScientificNotation
Textual Convention: ZHONE-RADIO-TC-MIBSkyZhoneScientificNotation OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.5504.5.8.4.1.3
wtnRcvEbNoFloat
Current local demodulator (rcvd) Energy-bit per noise.
Conveys energy in each bit as compared to energy in noise.
ZHONE-RADIO-TC-MIBSkyZhoneScientificNotation
Textual Convention: ZHONE-RADIO-TC-MIBSkyZhoneScientificNotation OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.5504.5.8.4.1.4

radioTotalTable

table
.1.3.6.1.4.1.5504.5.8.6 · 1 row entry · 3 columns
Open in standard view 
Table of current statistics in the style of rfc2493 current table.
radioTotalEntry entry .1.3.6.1.4.1.5504.5.8.6.1
Set of basic statistics for radio interface.
Indexes
No indexes recorded
Column Syntax OID
radioTotalES
Number of seconds the radio link detected bit errors since
the system has been up, or since last reset.

If the BER is above the
user set threshhold then the readioCurrentSES count will be
incremented…
SNMPv2-SMIGauge32r/w
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.8.6.1.1
radioTotalSES
Count of the number of seconds the radio endured severe conditions
since system came up or value was reset.

A severe condition occurs if:
1 - received BER is greater exceeds the BER threshold and has n…
SNMPv2-SMIGauge32r/w
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.8.6.1.2
radioTotalUAS
Unavailable seconds. This value is incremented once per second after
ten consecutive radioCurrentSES (severe-error seconds) are counted.
An equipment failure will also increment this value.

Writing any…
SNMPv2-SMIGauge32r/w
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.5504.5.8.6.1.3