wtnActiveTransmitFrequency

Current transmit frequency. As described in zhoneRadio-TC.mib.
              
              
23Ghz family:  ( according to sysObjId )
-------------------------------------------   
The transmit frequency is entered as a floating point number in Mhz,
for example, 23565.5 for 23.5655Ghz.
Note:  receive frequency will also be affected by this parameter.
              
The resulting receive frequency will be simultaneously set to 
this value +/- wtnChannelSeparation  (plus or minus depending upon
whether the unit is an A or B type ODU.)
              
If the frequency entered or the calulated receive frequency
outside the range of the unit, an error will be returned and the
value left unchanged.
              
If a new active frequency is equal to the current value frequency,
the command will have no effect and no error message will result. 
              
Every time the active frequency changes BITS WILL BE DROPPED.  
In poor conditions there is a risk that the new frequency assignment 
will fare more poorly.  The user should expect alarms where the facility 
is terminated until the nodes re-sync.
              
If the link is operational, the new frequencies will be changed
at the opposite end before the values at the local end are changed
in an attempt to minimize payload data loss.
              
5.7Ghz family of systems (according to sysObjId )
-------------------------------------------------
Value will reflect the frequency of the currently
active channel (wtnActiveChannelNumber).
Writing to this variable will have no effect.

MIB

ZHONE-PHY-WTN-RADIO-MIB

OID

.1.3.6.1.4.1.5504.5.8.1.1.3

Type

column

Access

readwrite

Status

current

Units

Hz

Parent

wtnConfigEntry

Table

wtnConfigTable

Siblings

17