wtnTrapsEnable
ZHONE-PHY-WTN-RADIO-MIB ·
.1.3.6.1.4.1.5504.5.8.1.1.15
Object
When true(1), radio traps may be emitted.
When false(2), radio traps will be absorbed.
Default value is true(1) = enabled.
Context
- MIB
- ZHONE-PHY-WTN-RADIO-MIB
- OID
.1.3.6.1.4.1.5504.5.8.1.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wtnConfigEntry
- Table
- wtnConfigTable
- Siblings
- 17
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wtnRadioIfIndex This object should be made equal to the Ifindex used for
the radio interface. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.5504.5.8.1.1.1 |
| wtnRxBERHysteresisWindow After a wtnBerAlarm trap is sent, it is revoked using the same trap with
the condition flag set to false when the modem BER estimate is lower
than the set point wtnModemRxBERThre… | column | ZHONE-RADIO-TC-MIBSkyZhoneScientificNotation | .1.3.6.1.4.1.5504.5.8.1.1.10 |
| wtnAntennaSize Initial power of transmitter is based upon antenna diameter.
oneFoot(1) - a one foot dish
twoFeet(2) - a two foot dish
fourFeet(4) - a four foot dish
sixFeet(6) - a… | column | feet Enumeration | .1.3.6.1.4.1.5504.5.8.1.1.11 |
| wtnIduOduCableLength The length of the coaxial cable between the Indoor
Unit and the Outdoor Unit.
Used internally to compensate for the coaxial cable's
natural attenuation of the signa… | column | feet Integer32 | .1.3.6.1.4.1.5504.5.8.1.1.12 |
| wtnRssiThresh Set point of RSSI thresholdalarm. When the ODU RSSI estimate
is lower than this value, a wtnRssiDeviation trap will be emitted.
When the ODU RSSI estimate is higher than this set… | column | dB Integer32 | .1.3.6.1.4.1.5504.5.8.1.1.13 |
| wtnRssiHysteresisWindow After a wtnRssiDeviation Trap is sent, an the trap is re-emitted
with the condition flag set to false when the ODU RSSI
estimate is higher than the set point wtnOduRxRSSIThresh p… | column | dB SNMPv2-SMIInteger32 | .1.3.6.1.4.1.5504.5.8.1.1.14 |
| wtnOduLoopback loopbackOn(1) - engages the loopback function at the ODU (outdoor unit).
Data normally transmitted by the radio is instead returned to the IDU
(indoor unit). This is useful to ch… | column | Enumeration | .1.3.6.1.4.1.5504.5.8.1.1.16 |
| wtnOduIdentifier Textual description of ODU.
This string typically identifies the location of antenna. | column | SNMP-FRAMEWORK-MIBSnmpAdminString | .1.3.6.1.4.1.5504.5.8.1.1.17 |
| wtnTxLevel Desired transmitter signal strength (TSSI) at antenna.
Note: Accuracy decreases as power levels decrease below 20dBm.
FCC maximum power allowed is +30dBm. | column | dB Integer32 | .1.3.6.1.4.1.5504.5.8.1.1.18 |
| wtnActiveChannelNumber Assigns one of N allowed frequency pairs for the radio
transmitter and reciever as described in zhoneRadio-TC.mib.
5.7Ghz family (sysObjId) systems:
--------------… | column | ZHONE-RADIO-TC-MIBSkyZhoneRadioChannelNumber | .1.3.6.1.4.1.5504.5.8.1.1.2 |
| wtnActiveTransmitFrequency Current transmit frequency. As described in zhoneRadio-TC.mib.
23Ghz family: ( according to sysObjId )
------------------------------------------- … | column | Hz ZHONE-RADIO-TC-MIBSkyZhoneScientificNotation | .1.3.6.1.4.1.5504.5.8.1.1.3 |
| wtnStandbyChannelNumber Assigns one of N allowed standby frequency pairs to the radio
transmitter and reciever as described in zhoneRadio-TC.mib.
5.7Ghz family (sysObjId) systems:
-------… | column | ZHONE-RADIO-TC-MIBSkyZhoneRadioChannelNumber | .1.3.6.1.4.1.5504.5.8.1.1.4 |
| wtnStandbyTransmitFrequency Standby Transmit frequency as described in zhoneRadio-TC.mib.
23Ghz family: ( according to sysObjId )
------------------------------------------- … | column | Hz ZHONE-RADIO-TC-MIBSkyZhoneScientificNotation | .1.3.6.1.4.1.5504.5.8.1.1.5 |
| wtnAutoChannelSwitchEnable true(1) - allows radio to automatically switch
to the standby channel in case of active channel
interference.
false(2) - inhibits radio from automatically
switch… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.5.8.1.1.6 |
| wtnChannelSeparation 23Ghz family (sysObjId) systems:
---------------------------------
Channel separation - the fixed difference between transmit
and receive frequency.
Only three val… | column | Enumeration | .1.3.6.1.4.1.5504.5.8.1.1.7 |
| wtnRadioAmplifiersEnable true(1) - Enables amplifiers for transmitter and receiver.
The radio will begin transmitting and receiving data. If the ODU
is looped back, unable to lock onto a signal, or the O… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.5504.5.8.1.1.8 |
| wtnRxBERThresh Set point of BER alarm. When the modem BER estimate
is higher than this value, a modem BER alarm will occur.
The BER over threshold Causes trap wtnBerAlarm to be emitted.
The ala… | column | ZHONE-RADIO-TC-MIBSkyZhoneScientificNotation | .1.3.6.1.4.1.5504.5.8.1.1.9 |