TROPIC-ROE-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
5
Rows
5
Columns
111
tnRoeSeqProfTable
table.1.3.6.1.4.1.7483.2.2.4.12.1.1.1
·
1 row entry
·
12 columns
Roe sequence number table.
Entry in tnRoeSeqTable table. The seq-num-profile is
used to specifie the composition of the sequence number
field in RoE header for the RoE packets. By default,
the seq-num-profile with seq-num-prof-id = 1 exist,
whi…
used to specifie the composition of the sequence number
field in RoE header for the RoE packets. By default,
the seq-num-profile with seq-num-prof-id = 1 exist,
whi…
Indexes
tnRoeSeqProfCardType tnRoeSeqProfPortID tnRoeSeqProfID
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tnRoeSeqProfCardType
The card type for TPS.
|
TropicRoeCardType Textual Convention: TropicRoeCardType EnumerationType Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.1 |
||||||||||||
|
tnRoeSeqProfPortID
tnRoeSeqProfPortID is an index into this table. It maps
this port to its entry in the mib-2 interfaces table. |
TN-TC-MIBTmnxPortID Textual Convention: TN-TC-MIBTmnxPortID Integer32 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.2 |
||||||||||||
|
tnRoeSeqProfID
The sequency number profile id, unique within a roe
entity. |
Integer32 Constraints: range: 1-80 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.3 |
||||||||||||
|
tnRoeSeqProfDescription
The description character string. Strings can be up to
80 characters long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be e… |
TN-TC-MIBTItemDescriptionr/w Textual Convention: TN-TC-MIBTItemDescription OctetStringType Constraints: range: 0..80 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.4 |
||||||||||||
|
tnRoeSeqProfType
The type of the composition of sequence number file in
RoE header. frmrNum - Use 28-bit (BFN,HFN,bFN) in the Sequence number field. Bit 0-4 are zeroes. Bit 5-16 represents BFN. … |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.5 |
||||||||||||
|
tnRoeSeqProfPMax
Applicable only when seq-num-type = frmrnum. It configures
the maximum numerical value of the p-counter field. |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.6 |
||||||||||||
|
tnRoeSeqProfPIncProp
Applicable only when seq-num-type = frmrnum. It configures
the method to increment the p-counter. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.7 |
||||||||||||
|
tnRoeSeqProfPInc
Applicable only when seq-num-type = frmrnum. It configures
the increment value of p-counter on every sent packet. |
Unsigned32r/w Constraints: range: 1-4294967295 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.8 |
||||||||||||
|
tnRoeSeqProfQMax
Applicable only when seq-num-type = frmrnum. It configures
the maximum numerical value of the q-counter field. |
Unsigned32r/w Constraints: range: 0-4294967295 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.9 |
||||||||||||
|
tnRoeSeqProfQIncProp
Applicable only when seq-num-type = frmrnum. This command
enables to increment the q-counter. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.10 |
||||||||||||
|
tnRoeSeqProfQInc
Applicable only when seq-num-type = frmrnum. This command
enables to increment the q-counter. |
Unsigned32r/w Constraints: range: 1-4294967295 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.11 |
||||||||||||
|
tnRoeSeqProfRowStatus
The value of tnRoeEthlinkRowStatus defines the status
of the row. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.1.1.12 |
tnRoeTable
table.1.3.6.1.4.1.7483.2.2.4.12.1.1.2
·
1 row entry
·
25 columns
Roe table.
Entry in Roe table. The roe entity is automatically
created when the client interface of CPRI/OBSAI type
with the mapping type = tunneling / structure-agnostic
/ structure-aware is created. And it has one-to-one
mappi…
created when the client interface of CPRI/OBSAI type
with the mapping type = tunneling / structure-agnostic
/ structure-aware is created. And it has one-to-one
mappi…
Indexes
tnRoeCardType tnRoePortID
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tnRoeCardType
The card type for TPS.
|
TropicRoeCardType Textual Convention: TropicRoeCardType EnumerationType Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.1 |
||||||||||||
|
tnRoePortID
tnRoePortID is an index into this table. It maps this
port to its entry in the mib-2 interfaces table. |
TN-TC-MIBTmnxPortID Textual Convention: TN-TC-MIBTmnxPortID Integer32 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.2 |
||||||||||||
|
tnRoeDescription
The description character string. Strings can be up to
80 characters long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be e… |
TN-TC-MIBTItemDescriptionr/w Textual Convention: TN-TC-MIBTItemDescription OctetStringType Constraints: range: 0..80 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.3 |
||||||||||||
|
tnRoeOrderInfoType
The orderInfo field in RoE header. This parameter can
be modified only when roe is shutdown. prestime - Presentation Time filled in OrderInfo field of RoE header. seqnum - Sequence Number filled in O… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.4 |
||||||||||||
|
tnRoePresTimeOffset
The time in the unit of 1/100 of nanosecond. 0 is a
specical value, which means the offset is automatically adjusted by the RoE mapper based on the latency measurement. |
Integer32r/w Constraints: range: 0-1677721600 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.5 |
||||||||||||
|
tnRoeCpriTxGenOffset
The time in the unit of 1/100 of nanosecond.
Applicable only when order-info-type is set to seq-num. Specifies the offset time to start the transmission of CPRI frames at CPRI egress. CPRI egress starts to send CPRI fr… |
OctetStringr/w Constraints: range: 7-7 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.6 |
||||||||||||
|
tnRoeAutoUponChange
Enable the automatic adjustment of ts-gen-offset when the
network delay changes due to the topology change, e.g., protection switch. Applicable only when order-info-type is set to seq-num. This parameter can be modifi… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.7 |
||||||||||||
|
tnRoeSeqNumProfID
Applicable only when order-info-type is set to seq-num.
Associate a sequence number profile with the RoE entity. This paramete can be modified only when roe is shutdown. |
Integer32r/w Constraints: range: 1-80 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.8 |
||||||||||||
|
tnRoeInitialTxBFN
The BFN in the initial Hyperframe control word at CPRI
egress. Applicable only when order-info-type is set to seq-num. It configures the bfn (BFN field in CPRI control word) in the initial hyperframe. It can be modif… |
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.9 |
||||||||||||
|
tnRoeInitialTxHFN
HFN in the next hyperframe control word. Aplicable only
when order-info-type is set to seq-num. It specifies the HFN in initial CPRI hyperframe control word at CPRI egress. It can be modified only when roe is shutdown. |
Integer32r/w Constraints: range: 0-149 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.10 |
||||||||||||
|
tnRoeEncapMode
tunneling - 10B or 66B line codes are encapsulted
into RoE packets. linecodeAware - CPRI basic frames in 8B or 64B symbols removing the line coding and (if any) scrambling and FEC, are encapsulated into … |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.11 |
||||||||||||
|
tnRoeAdminState
up - The administrative state is up.
down - The administrative state is down. |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.12 |
||||||||||||
|
tnRoePmonPolicy
PMON policy id assoicated to the RoE.
|
Integer32r/w Constraints: range: 0-99 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.13 |
||||||||||||
|
tnRoeRowStatus
The value of tnRoeRowStatus defines the status of the row.
|
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.14 |
||||||||||||
|
tnRoeAlmProfName
.
|
OctetStringr/w Constraints: range: 1-40 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.15 |
||||||||||||
|
tnRoePresTimeOffsetSubNano
The time in the unit of 1/32 of nanosecond.
|
Integer32r/w Constraints: range: 0-31 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.16 |
||||||||||||
|
tnRoePresTimeOffsetNano
The time in the unit of nanosecond.
|
Integer32r/w Constraints: range: 5000-16777216 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.17 |
||||||||||||
|
tnRoeTargetOffsetSubNano
The time in the unit of 1/32 of nanosecond for provisioned
target delay.The parameter is available only when CPRI port is set to structure-aware mode. Represent the provisioned target delay - In DL path : BBU CPRI egre… |
Integer32r/w Constraints: range: 0-31 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.18 |
||||||||||||
|
tnRoeTargetOffsetNano
The time is in the unit of nanosecond for provisioned
target delay. The parameter is available only when CPRI port is set to structure-aware mode. Represent the provisioned target delay - In DL path : BBU CPRI egress … |
Integer32r/w Constraints: range: 5000-16777216 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.19 |
||||||||||||
|
tnRoeMapperSampleWidth
The parameter is available only when CPRI port is set to
structure-aware mode. This command configures the IQ sample width in the CPRI link as a parameter for all data mappers (sa-type = 0). This parameter is needed … |
Integer32r/w Constraints: range: 4-20 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.20 |
||||||||||||
|
tnRoeDeMapperSampleWidth
The parameter is available only when CPRI port is set to
structure-aware mode. This command configures the IQ sample width in the CPRI link as a global parameter for all data demappers (sa-type = 1). This parameter i… |
Integer32r/w Constraints: range: 4-20 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.21 |
||||||||||||
|
tnRoePPointer
The parameter is available only when CPRI port is set to
structure-aware mode. Specifies p-pointer value for the fast C&M channel in CPRI link associated with the RoE entity. p-pointer defines the fast C&M channel reg… |
Integer32r/w Constraints: range: 20-63 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.24 |
||||||||||||
|
tnRoeCpriProtocolVer
CPRI protocol version
|
Integer32r/w Constraints: range: 1-10 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.25 |
||||||||||||
|
tnRoeMapperStatusEnable
The parameter is available only when CPRI port is set
to structure-aware mode and applies to RoE entity for a CPRI port. When enabled: (1) RoE entity disregards slowcm-rate, p-pointer, protocol-version parameter… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.26 |
||||||||||||
|
tnRoeSlowcmRate
The parameter is available only when CPRI port is set to
structure-aware mode. This command indicates rate of slow C&M channel in CPRI link. When slow C&M is not supported by setting <rate-id> = 0, no slow C&M RoE flo… |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.27 |
tnRoeMapperTable
table.1.3.6.1.4.1.7483.2.2.4.12.1.1.3
·
1 row entry
·
29 columns
Roe Mapper table.
Entry in Roe Mapper table. It creates or edits a
mapper of structure-agnostic type when the encap-mode
of the corresponding roe is structure-agnostic. In
structure-agnostic mode, at most 1 mapper can be created
in a r…
mapper of structure-agnostic type when the encap-mode
of the corresponding roe is structure-agnostic. In
structure-agnostic mode, at most 1 mapper can be created
in a r…
Indexes
tnRoeMapperCardType tnRoeMapperPortID tnRoeMapperID
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tnRoeMapperCardType
The card type for TPS.
|
TropicRoeCardType Textual Convention: TropicRoeCardType EnumerationType Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.1 |
||||||||||||
|
tnRoeMapperPortID
tnRoePortID is an index into this table. It maps this
port to its entry in the mib-2 interfaces table. |
TN-TC-MIBTmnxPortID Textual Convention: TN-TC-MIBTmnxPortID Integer32 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.2 |
||||||||||||
|
tnRoeMapperID
Specifies the mapper id, unique within a roe entity.
1 - when structure-agnostic mode (tunneling or line-coding aware) is selected. 1..80 - when structure-aware mode is selected. The following default map… |
Integer32 Constraints: range: 1-80 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.3 |
||||||||||||
|
tnRoeMapperDescription
The description character string. Strings can be up to
80 characters long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be e… |
TN-TC-MIBTItemDescriptionr/w Textual Convention: TN-TC-MIBTItemDescription OctetStringType Constraints: range: 0..80 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.4 |
||||||||||||
|
tnRoeMapperFlowID
This command configures the flowid used in 'flowID'
field in RoE header. flowid has no default value, and must be specified by the user. This parameter can be modified only when roe is shutdown. |
Integer32r/w Constraints: range: 0-254 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.5 |
||||||||||||
|
tnRoeMappeEtherlinkID
Specifies the ethlink id, used to configure the ethernet
frame header. This parameter has no default value. It must be explicitly configured. This parameter can be modified only when roe is shutdown. |
Integer32r/w Constraints: range: 1-80 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.6 |
||||||||||||
|
tnRoeMapperPayloadLen
Specifies the length of the payload in RoE packets in
bytes after the RoE common header and beforeFCS. For tunneling mode,the payload length can be 1,1.5,2,4,8 times of CPRI basic frames with line coding. For line codin… |
Integer32r/w Constraints: range: 256-1500 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.7 |
||||||||||||
|
tnRoeMapperSyncMode
The sync mode to control when to generate the presentation
time. Only when the basic frame number and/or bfn/hfn in received CPRI frame matches the basic frame number and/or bfn/hfn specified by the user based on the s… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.8 |
||||||||||||
|
tnRoeMapperBfn
Specifies the bfn used for sync.
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.9 |
||||||||||||
|
tnRoeMapperHfn
Specifies the bfn used for sync.
|
Integer32r/w Constraints: range: 0-149 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.10 |
||||||||||||
|
tnRoeMapperBfrm
Specifies the basic frame number used for sync.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.11 |
||||||||||||
|
tnRoeMapperShutdown
Shutdown an RoE mapper entity. When disabled, an
entity does not change, reset, or remove any configuration settings or statistics. RoE Mappers must be shut down before they may be deleted. RoE mappers are created in… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.12 |
||||||||||||
|
tnRoeMapperType
The Type of the mapper: Tunneling, linecodeAware,
structureAware, structureAwareControl. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.13 |
||||||||||||
|
tnRoeMapperOrderInfoType
SeqNum or Presentation Time.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.14 |
||||||||||||
|
tnRoeMapperPmonPolicy
PMON policy id assoicated to the RoE Mapper.
|
Integer32r/w Constraints: range: 0-99 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.15 |
||||||||||||
|
tnRoeMapperRowStatus
The value of tnRoeMapperRowStatus defines the status
of the row. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.16 |
||||||||||||
|
tnRoeMapperAlmProfName
.
|
OctetStringr/w Constraints: range: 1-40 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.17 |
||||||||||||
|
tnRoeMapperSaType
The structure-aware mode mapper or demapper type.
<type-id> valid values: 1 = AxC data 2 = fast C&M 3 = slow C&M 4 = VSD raw (covering Ctrl_AxC and VSD) Default values: 1 for mapper-id/demapper-id = 1 - 64 2 for map… |
Integer32r/w Constraints: range: 1-4 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.18 |
||||||||||||
|
tnRoeMapperBwID
Specifies bw (currently covering all LTE BW). Valid
values: 1 = 1.4MHz 2 = 3MHz 3 = 5MHz 4 = 10MHz 5 = 15MHz 6 = 20MHz This parameter can be modified only when roe is shutdown. And the modification of this p… |
Integer32r/w Constraints: range: 1-6 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.19 |
||||||||||||
|
tnRoeMapperPosition
Valid range based on CPRI rate parameter setting:
384..6143 for CPRI-10 160.. 2559 for CPRI-8 128..2047 for CPRI-7 64.. 1023 for CPRI-5 32.. 511 for CPRI-3 |
Integer32r/w Constraints: range: 32-6143 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.20 |
||||||||||||
|
tnRoeMapperFrameStartOffset
The parameter is available only when
- CPRI port is set to structure-aware mode - sa-type = 1 (for AxC data) Specifies each AxC frame start offset relative to CPRI 10ms frame boundary. - For hub TPS prov… |
Integer32r/w Constraints: range: 32-6143 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.21 |
||||||||||||
|
tnRoeMapperSchanStart
The parameter is available only when
- CPRI port is set to structure-aware mode and - sa-type = 4 (for VSD raw) This parameter identifies the subchannel number (Ns) in the CPRI control word as the start o… |
Integer32r/w Constraints: range: 4-19 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.22 |
||||||||||||
|
tnRoeMapperSchanSize
The parameter is available only when
- CPRI port is set to structure-aware mode and - sa-type = 4 (for VSD raw) This parameter identifies the size of VSD raw group in number of consecutive subchannels wit… |
Integer32r/w Constraints: range: 1-64 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.23 |
||||||||||||
|
tnRoeMapperPincrement
.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.24 |
||||||||||||
|
tnRoeMapperNa
.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.25 |
||||||||||||
|
tnRoeMapperS
.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.26 |
||||||||||||
|
tnRoeMapperK
.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.27 |
||||||||||||
|
tnRoeMapperNc
.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.28 |
||||||||||||
|
tnRoeMapperNv
.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.29 |
tnRoeDeMapperTable
table.1.3.6.1.4.1.7483.2.2.4.12.1.1.4
·
1 row entry
·
30 columns
Roe DeMapper table.
Entry in Roe DeMapper table. It creates or edits a
demapper of structure-agnostic type when the encap-mode
of the corresponding roe is structure-agnostic. In
structure-agnostic mode, at most 1 demapper can be
created …
demapper of structure-agnostic type when the encap-mode
of the corresponding roe is structure-agnostic. In
structure-agnostic mode, at most 1 demapper can be
created …
Indexes
tnRoeDeMapperCardType tnRoePortID tnRoeDeMapperID
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tnRoeDeMapperCardType
The card type for TPS.
|
TropicRoeCardType Textual Convention: TropicRoeCardType EnumerationType Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.1 |
||||||||||||
|
tnRoeDeMapperPortID
tnRoeDeMapperPortID is an index into this table. It maps
this port to its entry in the mib-2 interfaces table. |
TN-TC-MIBTmnxPortID Textual Convention: TN-TC-MIBTmnxPortID Integer32 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.2 |
||||||||||||
|
tnRoeDeMapperID
Specifies the de-mapper id, unique within a roe entity.
1 when structure-agnostic mode (tunneling or line-coding aware) is selected 1..80 when structure-aware mode is selected The following default dema… |
Integer32 Constraints: range: 1-80 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.3 |
||||||||||||
|
tnRoeDeMapperDescription
The description character string. Strings can be up to
80 characters long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be e… |
TN-TC-MIBTItemDescriptionr/w Textual Convention: TN-TC-MIBTItemDescription OctetStringType Constraints: range: 0..80 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.4 |
||||||||||||
|
tnRoeDeMappeEtherlinkID
Specifies the ethlink id, used to configure the ethernet
frame header. This parameter has no default value. It must be explicitly configured. This parameter can be modified only when roe is shutdown. |
Integer32r/w Constraints: range: 1-80 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.5 |
||||||||||||
|
tnRoeDeMapperPayloadLen
Specifies the length of the payload in RoE packets in bytes
after the RoE common header and before FCS. For tunneling mode, the payload length can be 1,1.5,2,4,8 times of CPRI basic frames with line coding. For line cod… |
Integer32r/w Constraints: range: 256-1500 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.6 |
||||||||||||
|
tnRoeDeMapperSyncMode
This command configures the sync mode to control when to
generate the presentation time. Only when the basic frame number and/or bfn/hfn in received CPRI frame matches the basic frame number and/or bfn/hfn specified by… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.7 |
||||||||||||
|
tnRoeDeMapperBfn
Specifies the bfn used for sync.
|
Integer32r/w Constraints: range: 0-4095 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.8 |
||||||||||||
|
tnRoeDeMapperHfn
Specifies the bfn used for sync.
|
Integer32r/w Constraints: range: 0-149 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.9 |
||||||||||||
|
tnRoeDeMapperBfrm
Specifies the basic frame number used for sync.
|
Integer32r/w Constraints: range: 0-255 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.10 |
||||||||||||
|
tnRoeDeMapperJitterBufferDepth
Specifies the basic frame number used for sync.
|
Integer32r/w Constraints: range: 8-128 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.11 |
||||||||||||
|
tnRoeDeMapperShutdown
This command administratively disables an RoE mapper
entity. When disabled, an entity does not change, reset, or remove any configuration settings or statistics. RoE mappers must be shut down before they may be delete… |
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.12 |
||||||||||||
|
tnRoeDeMapperType
The Type of the mapper: Tunneling, linecodeAware,
structureAwareControl. |
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.13 |
||||||||||||
|
tnRoeDeMapperFlowID
The flowid used in 'flowID' field in RoE header.
|
Integer32 Constraints: range: 0-254 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.14 |
||||||||||||
|
tnRoeDeMapperOrderInfoType
The flowid used in 'flowID' field in RoE header.
|
Enumeration Enumerated Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.15 |
||||||||||||
|
tnRoeDeMapperPmonPolicy
PMON policy id assoicated to the RoE DeMapper.
|
Integer32r/w Constraints: range: 0-99 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.16 |
||||||||||||
|
tnRoeDeMapperRowStatus
The value of tnRoeMapperRowStatus defines the status
of the row. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.17 |
||||||||||||
|
tnRoeDeMapperAlmProfName
.
|
OctetStringr/w Constraints: range: 1-40 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.18 |
||||||||||||
|
tnRoeDeMapperSaType
The structure-aware mode mapper or demapper type.
<type-id> valid values: 1 = AxC data 2 = fast C&M 3 = slow C&M 4 = VSD raw (covering Ctrl_AxC and VSD) Default value: 1 for mapper-id/demapper-i… |
Integer32r/w Constraints: range: 1-4 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.19 |
||||||||||||
|
tnRoeDeMapperBwID
Specifies bw (currently covering all LTE BW). Valid
values: 1 = 1.4MHz 2 = 3MHz 3 = 5MHz 4 = 10MHz 5 = 15MHz 6 = 20MHz This parameter can be modified only when roe is shutdown. And the modification of this p… |
Integer32r/w Constraints: range: 1-6 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.20 |
||||||||||||
|
tnRoeDeMapperPosition
Valid range based on CPRI rate parameter setting:
384..6143 for CPRI-10 160.. 2559 for CPRI-8 128..2047 for CPRI-7 64.. 1023 for CPRI-5 32.. 511 for CPRI-3 |
Integer32r/w Constraints: range: 32-6143 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.21 |
||||||||||||
|
tnRoeDeMapperFrameStartOffset
The parameter is available only when
- CPRI port is set to structure-aware mode - sa-type = 1 (for AxC data) Specifies each AxC frame start offset relative to CPRI 10ms frame boundary. - For hub TPS prov… |
Integer32r/w Constraints: range: 32-6143 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.22 |
||||||||||||
|
tnRoeDeMapperSchanStart
The parameter is available only when
- CPRI port is set to structure-aware mode and - sa-type = 4 (for VSD raw) This parameter identifies the subchannel number (Ns) in the CPRI control word as the start o… |
Integer32r/w Constraints: range: 4-19 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.23 |
||||||||||||
|
tnRoeDeMapperSchanSize
The parameter is available only when
- CPRI port is set to structure-aware mode and - sa-type = 4 (for VSD raw) This parameter identifies the size of VSD raw group in number of consecutive subchannels wit… |
Integer32r/w Constraints: range: 1-64 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.24 |
||||||||||||
|
tnRoeDeMapperPincrement
.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.25 |
||||||||||||
|
tnRoeDeMapperNa
.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.26 |
||||||||||||
|
tnRoeDeMapperS
.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.27 |
||||||||||||
|
tnRoeDeMapperK
.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.28 |
||||||||||||
|
tnRoeDeMapperNc
.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.29 |
||||||||||||
|
tnRoeDeMapperNv
.
|
SNMPv2-SMIInteger32 Textual Convention: SNMPv2-SMIInteger32 Integer32Type Constraints: range: -2147483648..2147483647 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.30 |
tnRoeEthlinkTable
table.1.3.6.1.4.1.7483.2.2.4.12.1.1.5
·
1 row entry
·
15 columns
Roe Eth Link table.
Entry in Roe DeMapper table. It creates or edits an
ethlink entity, which specifies the Ethernet frame header
for the RoE packets. The ethlink ID is unique within the
RoE entity. When a ethlink is created, the create…
ethlink entity, which specifies the Ethernet frame header
for the RoE packets. The ethlink ID is unique within the
RoE entity. When a ethlink is created, the create…
Indexes
tnRoeEthlinkCardType tnRoeEthlinkPortID tnRoeEthlinkID
| Column | Syntax | OID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
tnRoeEthlinkCardType
tnRoeEthlinkCardType is an index into this table. It
specify the card type for TPS. |
TropicRoeCardType Textual Convention: TropicRoeCardType EnumerationType Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.1 |
||||||||||||
|
tnRoeEthlinkPortID
tnRoeEthlinkPortID is an index into this table. It maps
this port to its entry in the mib-2 interfaces table. |
TN-TC-MIBTmnxPortID Textual Convention: TN-TC-MIBTmnxPortID Integer32 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.2 |
||||||||||||
|
tnRoeEthlinkID
Specifies the ethlink id, unique within a roe entity.
1..2 when non-structure-aware mode is selected 1..16 when structure-aware mode is selected. |
Integer32 Constraints: range: 1-80 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.3 |
||||||||||||
|
tnRoeEthlinkDescription
The description character string. Strings can be up to
80 characters long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces, and so on), the entire string must be e… |
TN-TC-MIBTItemDescriptionr/w Textual Convention: TN-TC-MIBTItemDescription OctetStringType Constraints: range: 0..80 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.4 |
||||||||||||
|
tnRoeEthlinkDestMac
Specifies the 48-bit MAC address. Allowed values are any
non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses. {xx:xx:xx:xx:xx:xx | xx-xx-xx-xx-xx-xx} - MAC address, where xx is hexadecimal numbers. |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.5 |
||||||||||||
|
tnRoeEthlinkSourceMac
Specifies the 48-bit MAC address of the port. Allowed
values are any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses. {xx:xx:xx:xx:xx:xx | xx-xx-xx-xx-xx-xx} - MAC address, where xx is hexadeci… |
SNMPv2-TCMacAddressr/w Textual Convention: SNMPv2-TCMacAddress OctetStringType Constraints: range: 6 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.6 |
||||||||||||
|
tnRoeEthlinkTagDepth
The number of VLAN tags used in the Ethernet frame header.
|
Enumerationr/w Enumerated Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.7 |
||||||||||||
|
tnRoeEthlinkOuterEthertype
The ethertype for the outer tag when double tags are used
in Ethernet Frame header, i.e., tag-depth is double. |
Integer32r/w Constraints: range: 1536-65535 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.8 |
||||||||||||
|
tnRoeEthlinkOuterVid
The VLAN ID of the outer VLAN tag in Ethernet Frame Header
if double tag is used, i.e., tag-depth is double. |
Integer32r/w Constraints: range: 0-4094 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.9 |
||||||||||||
|
tnRoeEthlinkOuterPri
Specifies the priority of the outer VLAN tag in Ethernet
Frame Header if double tag is used, i.e., tag-depth is double. Default: 7. |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.10 |
||||||||||||
|
tnRoeEthlinkInnerEthertype
The ethertype for the inner tag when single or double
tags are used in Ethernet Frame header, i.e., tag-depth is single or double. |
Integer32r/w Constraints: range: 1536-65535 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.11 |
||||||||||||
|
tnRoeEthlinkInnerVid
The VLAN ID of the inner VLAN tag in Ethernet Frame Header
if either single or double tag is used, i.e., tag-depth is single or double. |
Integer32r/w Constraints: range: 0-4094 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.12 |
||||||||||||
|
tnRoeEthlinkInnerPri
The priority of the inner VLAN tag in Ethernet Frame Header
if single or double tag is used, i.e., tag-depth is single or double. |
Integer32r/w Constraints: range: 0-7 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.13 |
||||||||||||
|
tnRoeEthlinkEthertype
The ethertype for RoE PDU.
|
Integer32r/w Constraints: range: 1536-65535 |
.1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.14 |
||||||||||||
|
tnRoeEthlinkRowStatus
The value of tnRoeEthlinkRowStatus defines the status of
the row. |
SNMPv2-TCRowStatusr/w Textual Convention: SNMPv2-TCRowStatus EnumerationType Values:
|
.1.3.6.1.4.1.7483.2.2.4.12.1.1.5.1.15 |