tnRoeDeMapperFrameStartOffset

TROPIC-ROE-MIB · .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.22
MIB view Table view

Object

column r/w Integer32 
The parameter is available only when
- CPRI port is set to structure-aware mode
- sa-type = 1 (for AxC data)
              
Specifies each AxC frame start offset relative to CPRI
10ms frame boundary.
 - For hub TPS provision:    This parameter is for DL
                             path (in mapper) and UL
                             path (in de-mapper).
 - For remote TPS provision: This parameter is for UL
                             path (in mapper) and DL
                             path (in de-mapper).
              
For BBU-TPS application, setting to default value = 0 is
sufficient.  This parameter can be modified only when roe
is shutdown. And the modification of this parameter may
cause traffic interrupt and need to modify it in both roe
mapper and demapper so that the new value can work.
              
Default value for this attribute is 0.

Context

MIB
TROPIC-ROE-MIB
OID
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.22
Type
column
Access
readwrite
Status
current
Parent
tnRoeDeMapperEntry
Table
tnRoeDeMapperTable
Siblings
29

Syntax

Integer32

Values & Constraints

Object Constraints
range: 32-6143

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
tnRoeDeMapperCardType
The card type for TPS.
columnTropicRoeCardType.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.1
tnRoeDeMapperBfrm
Specifies the basic frame number used for sync.
columnInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.10
tnRoeDeMapperJitterBufferDepth
Specifies the basic frame number used for sync.
columnInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.11
tnRoeDeMapperShutdown
This command administratively disables an RoE mapper entity. When disabled, an entity does not change, reset, or remove any configuration settings or statistics. RoE mappers mus…
columnEnumeration.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.12
tnRoeDeMapperType
The Type of the mapper: Tunneling, linecodeAware, structureAwareControl.
columnEnumeration.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.13
tnRoeDeMapperFlowID
The flowid used in 'flowID' field in RoE header.
columnInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.14
tnRoeDeMapperOrderInfoType
The flowid used in 'flowID' field in RoE header.
columnEnumeration.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.15
tnRoeDeMapperPmonPolicy
PMON policy id assoicated to the RoE DeMapper.
columnInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.16
tnRoeDeMapperRowStatus
The value of tnRoeMapperRowStatus defines the status of the row.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.17
tnRoeDeMapperAlmProfName
.
columnOctetString.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.18
tnRoeDeMapperSaType
The structure-aware mode mapper or demapper type. <type-id> valid values: 1 = AxC data 2 = fast C&M 3 = slow C&M 4 = VSD raw (covering Ctrl_AxC and VSD) Def…
columnInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.19
tnRoeDeMapperPortID
tnRoeDeMapperPortID is an index into this table. It maps this port to its entry in the mib-2 interfaces table.
columnTN-TC-MIBTmnxPortID.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.2
tnRoeDeMapperBwID
Specifies bw (currently covering all LTE BW). Valid values: 1 = 1.4MHz 2 = 3MHz 3 = 5MHz 4 = 10MHz 5 = 15MHz 6 = 20MHz This parameter can be modified only when roe is …
columnInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.20
tnRoeDeMapperPosition
Valid range based on CPRI rate parameter setting: 384..6143 for CPRI-10 160.. 2559 for CPRI-8 128..2047 for CPRI-7 64.. 1023 for CPRI-5 32.. 511 for CPRI-3
columnInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.21
tnRoeDeMapperSchanStart
The parameter is available only when - CPRI port is set to structure-aware mode and - sa-type = 4 (for VSD raw) This parameter identifies the subchannel number (Ns)…
columnInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.23
tnRoeDeMapperSchanSize
The parameter is available only when - CPRI port is set to structure-aware mode and - sa-type = 4 (for VSD raw) This parameter identifies the size of VSD raw group …
columnInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.24
tnRoeDeMapperPincrement
.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.25
tnRoeDeMapperNa
.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.26
tnRoeDeMapperS
.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.27
tnRoeDeMapperK
.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.28
tnRoeDeMapperNc
.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.29
tnRoeDeMapperID
Specifies the de-mapper id, unique within a roe entity. 1 when structure-agnostic mode (tunneling or line-coding aware) is selected 1..80 when structure-aware mode is selected …
columnInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.3
tnRoeDeMapperNv
.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.30
tnRoeDeMapperDescription
The description character string. Strings can be up to 80 characters long composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $, spaces,…
columnTN-TC-MIBTItemDescription.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.4
tnRoeDeMappeEtherlinkID
Specifies the ethlink id, used to configure the ethernet frame header. This parameter has no default value. It must be explicitly configured. This parameter can be modified onl…
columnInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.5
tnRoeDeMapperPayloadLen
Specifies the length of the payload in RoE packets in bytes after the RoE common header and before FCS. For tunneling mode, the payload length can be 1,1.5,2,4,8 times of CPRI bas…
columnInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.6
tnRoeDeMapperSyncMode
This command configures the sync mode to control when to generate the presentation time. Only when the basic frame number and/or bfn/hfn in received CPRI frame matches the basic …
columnEnumeration.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.7
tnRoeDeMapperBfn
Specifies the bfn used for sync.
columnInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.8
tnRoeDeMapperHfn
Specifies the bfn used for sync.
columnInteger32.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.9