tnRoeMapperShutdown
TROPIC-ROE-MIB ·
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.12
Object
column
r/w
Enumeration
Shutdown an RoE mapper entity. When disabled, an entity does not change, reset, or remove any configuration settings or statistics. RoE Mappers must be shut down before they may be deleted. RoE mappers are created in the administratively down (shutdown) state. When a no shutdown command is entered, the entity becomes administratively up.
Context
- MIB
- TROPIC-ROE-MIB
- OID
.1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.12- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnRoeMapperEntry
- Table
- tnRoeMapperTable
- Siblings
- 28
Syntax
Enumeration
Values & Constraints
Enumerated Values
2 | shutdown |
3 | no-shutdwn |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnRoeMapperCardType The card type for TPS. | column | TropicRoeCardType | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.1 |
| tnRoeMapperHfn Specifies the bfn used for sync. | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.10 |
| tnRoeMapperBfrm Specifies the basic frame number used for sync. | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.11 |
| tnRoeMapperType The Type of the mapper: Tunneling, linecodeAware,
structureAware, structureAwareControl. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.13 |
| tnRoeMapperOrderInfoType SeqNum or Presentation Time. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.14 |
| tnRoeMapperPmonPolicy PMON policy id assoicated to the RoE Mapper. | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.15 |
| tnRoeMapperRowStatus The value of tnRoeMapperRowStatus defines the status
of the row. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.16 |
| tnRoeMapperAlmProfName . | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.17 |
| tnRoeMapperSaType The structure-aware mode mapper or demapper type.
<type-id> valid values:
1 = AxC data
2 = fast C&M
3 = slow C&M
4 = VSD raw (covering Ctrl_AxC and VSD)
Default values:
1 for ma… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.18 |
| tnRoeMapperBwID Specifies bw (currently covering all LTE BW). Valid
values:
1 = 1.4MHz
2 = 3MHz
3 = 5MHz
4 = 10MHz
5 = 15MHz
6 = 20MHz
This parameter can be modified only when roe is … | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.19 |
| tnRoeMapperPortID tnRoePortID is an index into this table. It maps this
port to its entry in the mib-2 interfaces table. | column | TN-TC-MIBTmnxPortID | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.2 |
| tnRoeMapperPosition Valid range based on CPRI rate parameter setting:
384..6143 for CPRI-10
160.. 2559 for CPRI-8
128..2047 for CPRI-7
64.. 1023 for CPRI-5
32.. 511 for CPRI-3 | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.20 |
| tnRoeMapperFrameStartOffset The parameter is available only when
- CPRI port is set to structure-aware mode
- sa-type = 1 (for AxC data)
Specifies each AxC frame start offset relative to CPRI
… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.21 |
| tnRoeMapperSchanStart The parameter is available only when
- CPRI port is set to structure-aware mode and
- sa-type = 4 (for VSD raw)
This parameter identifies the subchannel number (Ns)… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.22 |
| tnRoeMapperSchanSize The parameter is available only when
- CPRI port is set to structure-aware mode and
- sa-type = 4 (for VSD raw)
This parameter identifies the size of VSD raw group
… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.23 |
| tnRoeMapperPincrement . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.24 |
| tnRoeMapperNa . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.25 |
| tnRoeMapperS . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.26 |
| tnRoeMapperK . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.27 |
| tnRoeMapperNc . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.28 |
| tnRoeMapperNv . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.29 |
| tnRoeMapperID Specifies the mapper id, unique within a roe entity.
1 - when structure-agnostic mode (tunneling or line-coding aware) is selected.
1..80 - when structure-aware mode is selected.
… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.3 |
| tnRoeMapperDescription The description character string. Strings can be up to
80 characters long composed of printable, 7-bit ASCII
characters. If the string contains special characters
(#, $, spaces,… | column | TN-TC-MIBTItemDescription | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.4 |
| tnRoeMapperFlowID This command configures the flowid used in 'flowID'
field in RoE header. flowid has no default value, and
must be specified by the user. This parameter can be
modified only when… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.5 |
| tnRoeMappeEtherlinkID Specifies the ethlink id, used to configure the ethernet
frame header. This parameter has no default value. It
must be explicitly configured. This parameter can be
modified onl… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.6 |
| tnRoeMapperPayloadLen Specifies the length of the payload in RoE packets in
bytes after the RoE common header and beforeFCS.
For tunneling mode,the payload length can be 1,1.5,2,4,8
times of CPRI basic… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.7 |
| tnRoeMapperSyncMode The sync mode to control when to generate the presentation
time. Only when the basic frame number and/or bfn/hfn in
received CPRI frame matches the basic frame number and/or
bfn/… | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.8 |
| tnRoeMapperBfn Specifies the bfn used for sync. | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.3.1.9 |