tnRoeAutoUponChange
TROPIC-ROE-MIB ·
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.7
Object
column
r/w
Enumeration
Enable the automatic adjustment of ts-gen-offset when the network delay changes due to the topology change, e.g., protection switch. Applicable only when order-info-type is set to seq-num. This parameter can be modified only when roe is shutdown.
Context
- MIB
- TROPIC-ROE-MIB
- OID
.1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnRoeEntry
- Table
- tnRoeTable
- Siblings
- 24
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | disable |
1 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnRoeCardType The card type for TPS. | column | TropicRoeCardType | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.1 |
| tnRoeInitialTxHFN HFN in the next hyperframe control word. Aplicable only
when order-info-type is set to seq-num. It specifies the
HFN in initial CPRI hyperframe control word at CPRI egress.
It c… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.10 |
| tnRoeEncapMode tunneling - 10B or 66B line codes are encapsulted
into RoE packets.
linecodeAware - CPRI basic frames in 8B or 64B
symbols removing the line coding and
(if any) scra… | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.11 |
| tnRoeAdminState up - The administrative state is up.
down - The administrative state is down. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.12 |
| tnRoePmonPolicy PMON policy id assoicated to the RoE. | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.13 |
| tnRoeRowStatus The value of tnRoeRowStatus defines the status of the row. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.14 |
| tnRoeAlmProfName . | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.15 |
| tnRoePresTimeOffsetSubNano The time in the unit of 1/32 of nanosecond. | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.16 |
| tnRoePresTimeOffsetNano The time in the unit of nanosecond. | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.17 |
| tnRoeTargetOffsetSubNano The time in the unit of 1/32 of nanosecond for provisioned
target delay.The parameter is available only when CPRI port
is set to structure-aware mode.
Represent the provisioned ta… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.18 |
| tnRoeTargetOffsetNano The time is in the unit of nanosecond for provisioned
target delay. The parameter is available only when CPRI
port is set to structure-aware mode.
Represent the provisioned targe… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.19 |
| tnRoePortID tnRoePortID is an index into this table. It maps this
port to its entry in the mib-2 interfaces table. | column | TN-TC-MIBTmnxPortID | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.2 |
| tnRoeMapperSampleWidth The parameter is available only when CPRI port is set to
structure-aware mode. This command configures the IQ
sample width in the CPRI link as a parameter for all data
mappers (s… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.20 |
| tnRoeDeMapperSampleWidth The parameter is available only when CPRI port is set to
structure-aware mode. This command configures the IQ
sample width in the CPRI link as a global parameter for
all data dem… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.21 |
| tnRoePPointer The parameter is available only when CPRI port is set to
structure-aware mode. Specifies p-pointer value for
the fast C&M channel in CPRI link associated with the RoE
entity. p-… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.24 |
| tnRoeCpriProtocolVer CPRI protocol version | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.25 |
| tnRoeMapperStatusEnable The parameter is available only when CPRI port is set
to structure-aware mode and applies to RoE entity for
a CPRI port.
When enabled:
(1) RoE entity disregards slowcm-rate, p-p… | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.26 |
| tnRoeSlowcmRate The parameter is available only when CPRI port is set to
structure-aware mode. This command indicates rate of slow
C&M channel in CPRI link. When slow C&M is not supported
by se… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.27 |
| tnRoeDescription The description character string. Strings can be up to
80 characters long composed of printable, 7-bit ASCII
characters. If the string contains special characters
(#, $, spaces,… | column | TN-TC-MIBTItemDescription | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.3 |
| tnRoeOrderInfoType The orderInfo field in RoE header. This parameter can
be modified only when roe is shutdown.
prestime - Presentation Time filled in OrderInfo field
of RoE header.
… | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.4 |
| tnRoePresTimeOffset The time in the unit of 1/100 of nanosecond. 0 is a
specical value, which means the offset is automatically
adjusted by the RoE mapper based on the latency
measurement. | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.5 |
| tnRoeCpriTxGenOffset The time in the unit of 1/100 of nanosecond.
Applicable only when order-info-type is set to seq-num.
Specifies the offset time to start the transmission of
CPRI frames at CPRI egr… | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.6 |
| tnRoeSeqNumProfID Applicable only when order-info-type is set to seq-num.
Associate a sequence number profile with the RoE entity.
This paramete can be modified only when roe is shutdown. | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.8 |
| tnRoeInitialTxBFN The BFN in the initial Hyperframe control word at CPRI
egress. Applicable only when order-info-type is set to
seq-num. It configures the bfn (BFN field in CPRI control
word) in … | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.2.1.9 |