tnRoeDeMappeEtherlinkID
TROPIC-ROE-MIB ·
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.5
Object
column
r/w
Integer32
Specifies the ethlink id, used to configure the ethernet frame header. This parameter has no default value. It must be explicitly configured. This parameter can be modified only when roe is shutdown.
Context
- MIB
- TROPIC-ROE-MIB
- OID
.1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.5- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- tnRoeDeMapperEntry
- Table
- tnRoeDeMapperTable
- Siblings
- 29
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-80
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| tnRoeDeMapperCardType The card type for TPS. | column | TropicRoeCardType | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.1 |
| tnRoeDeMapperBfrm Specifies the basic frame number used for sync. | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.10 |
| tnRoeDeMapperJitterBufferDepth Specifies the basic frame number used for sync. | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.11 |
| tnRoeDeMapperShutdown This command administratively disables an RoE mapper
entity. When disabled, an entity does not change, reset,
or remove any configuration settings or statistics. RoE
mappers mus… | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.12 |
| tnRoeDeMapperType The Type of the mapper: Tunneling, linecodeAware,
structureAwareControl. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.13 |
| tnRoeDeMapperFlowID The flowid used in 'flowID' field in RoE header. | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.14 |
| tnRoeDeMapperOrderInfoType The flowid used in 'flowID' field in RoE header. | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.15 |
| tnRoeDeMapperPmonPolicy PMON policy id assoicated to the RoE DeMapper. | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.16 |
| tnRoeDeMapperRowStatus The value of tnRoeMapperRowStatus defines the status
of the row. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.17 |
| tnRoeDeMapperAlmProfName . | column | OctetString | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.18 |
| tnRoeDeMapperSaType The structure-aware mode mapper or demapper type.
<type-id> valid values:
1 = AxC data
2 = fast C&M
3 = slow C&M
4 = VSD raw (covering Ctrl_AxC and VSD)
Def… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.19 |
| tnRoeDeMapperPortID tnRoeDeMapperPortID is an index into this table. It maps
this port to its entry in the mib-2 interfaces table. | column | TN-TC-MIBTmnxPortID | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.2 |
| tnRoeDeMapperBwID Specifies bw (currently covering all LTE BW). Valid
values:
1 = 1.4MHz
2 = 3MHz
3 = 5MHz
4 = 10MHz
5 = 15MHz
6 = 20MHz
This parameter can be modified only when roe is … | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.20 |
| tnRoeDeMapperPosition Valid range based on CPRI rate parameter setting:
384..6143 for CPRI-10
160.. 2559 for CPRI-8
128..2047 for CPRI-7
64.. 1023 for CPRI-5
32.. 511 for CPRI-3 | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.21 |
| tnRoeDeMapperFrameStartOffset The parameter is available only when
- CPRI port is set to structure-aware mode
- sa-type = 1 (for AxC data)
Specifies each AxC frame start offset relative to CPRI
… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.22 |
| tnRoeDeMapperSchanStart The parameter is available only when
- CPRI port is set to structure-aware mode and
- sa-type = 4 (for VSD raw)
This parameter identifies the subchannel number (Ns)… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.23 |
| tnRoeDeMapperSchanSize The parameter is available only when
- CPRI port is set to structure-aware mode and
- sa-type = 4 (for VSD raw)
This parameter identifies the size of VSD raw group … | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.24 |
| tnRoeDeMapperPincrement . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.25 |
| tnRoeDeMapperNa . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.26 |
| tnRoeDeMapperS . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.27 |
| tnRoeDeMapperK . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.28 |
| tnRoeDeMapperNc . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.29 |
| tnRoeDeMapperID Specifies the de-mapper id, unique within a roe entity.
1 when structure-agnostic mode (tunneling or line-coding aware) is selected
1..80 when structure-aware mode is selected
… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.3 |
| tnRoeDeMapperNv . | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.30 |
| tnRoeDeMapperDescription The description character string. Strings can be up to
80 characters long composed of printable, 7-bit ASCII
characters. If the string contains special characters
(#, $, spaces,… | column | TN-TC-MIBTItemDescription | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.4 |
| tnRoeDeMapperPayloadLen Specifies the length of the payload in RoE packets in bytes
after the RoE common header and before FCS. For tunneling mode,
the payload length can be 1,1.5,2,4,8 times of CPRI bas… | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.6 |
| tnRoeDeMapperSyncMode This command configures the sync mode to control when to
generate the presentation time. Only when the basic frame
number and/or bfn/hfn in received CPRI frame matches the
basic … | column | Enumeration | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.7 |
| tnRoeDeMapperBfn Specifies the bfn used for sync. | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.8 |
| tnRoeDeMapperHfn Specifies the bfn used for sync. | column | Integer32 | .1.3.6.1.4.1.7483.2.2.4.12.1.1.4.1.9 |