SIAE-RADIO-SYSTEM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
38
Rows
38
Columns
250

radioTable

table
.1.3.6.1.4.1.3373.1103.80.2 · 1 row entry · 5 columns
Open in standard view 
A list of radio interface entries. This table is useful 
to show the manager all the available radio interfaces 
on the equipment. Moreover it is a reference for 
Performance Monitoring (PWR and G828).
radioEntry entry .1.3.6.1.4.1.3373.1103.80.2.1
An entry containing management information applicable to a
particular radio interface.
Indexes
radioIndex
Column Syntax OID
radioIndex
A unique value, greater than zero, for each radio
interface. It is recommended that values are assigned
contiguously starting from 1.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.2.1.1
radioLabel
A textual string containing information about the radio
interface. This string should include the name of the
manufacturer, the product name and the version of the
interface hardware/software.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3373.1103.80.2.1.2
radioType
The type of interface.
Enumeration
Enumerated Values:
1other
2analogRadio
3digitalRadio
4xpicRadio
 .1.3.6.1.4.1.3373.1103.80.2.1.3
radioIfIndex
This object defines a greater than zero value
to identify an interface in ifTable or a zero
value if ifTable is not supported.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.3373.1103.80.2.1.4
radioStorageType
The storage type of this conceptual row. Conceptual
rows having the value 'permanent' need not allow
write-access to any columnar objects in the row.
SNMPv2-TCStorageType
Textual Convention: SNMPv2-TCStorageType Enumeration
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
 .1.3.6.1.4.1.3373.1103.80.2.1.5

xpicTable

table
.1.3.6.1.4.1.3373.1103.80.3 · 1 row entry · 3 columns
Open in standard view 
A list of xpic radio interface entries. If a manager 
wants to make an xpic link, it should only add a 
particular xpic radio interface to an xpic link.
xpicEntry entry .1.3.6.1.4.1.3373.1103.80.3.1
An entry containing management information applicable to a
particular xpic radio interface.
Indexes
xpicIndex
Column Syntax OID
xpicIndex
A unique value, greater than zero, for each xpic radio
interface. It is recommended that values are assigned
contiguously starting from 1.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.3.1.1
xpicRadioIdx
Index of xpic radio interface, corresponding
to an available xpic radio interface in radioTable.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.3.1.2
xpicRowstatus
Status of this conceptual row in xpicTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3373.1103.80.3.1.3

xpicChTable

table
.1.3.6.1.4.1.3373.1103.80.4 · 1 row entry · 3 columns
Open in standard view 
A list of xpic channel entries. This table maps
each xpic radio in respective xpic radio interface.
xpicChEntry entry .1.3.6.1.4.1.3373.1103.80.4.1
An entry containing management information applicable to a
particular xpic channel. It defines radio interface and
polarization for a given xpic channel.
Indexes
xpicIndex xpicChPolIndex
Column Syntax OID
xpicChPolIndex
This object identifies the xpic radio polarization.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.3373.1103.80.4.1.1
xpicChRadioIdx
Xpic radio interface, corresponding to a radio interface
in radioTable, used to make up the given xpic radio interface.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.4.1.2
xpicChRowstatus
Status of this conceptual row in xpicChTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3373.1103.80.4.1.3

linkTable

table
.1.3.6.1.4.1.3373.1103.80.6 · 1 row entry · 5 columns
Open in standard view 
A list of link entries.
linkEntry entry .1.3.6.1.4.1.3373.1103.80.6.1
An entry containing management information applicable to a
particular link.
Indexes
linkIndex
Column Syntax OID
linkIndex
A unique value, greater than zero, for each link.
Manager must use the first available index,
suggested by linkAvailableIndex.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.6.1.1
linkType
This object identifies link type. Supported link types are:
single link, 1+1 Hot Standby, 1+1 Frequency Diversity, 2+0 XPIC,
2+2 XPIC Hot Standby, 2+2 XPIC Frequency Diversity, N+1, and
1+0 XPIC Horizontal/Vertical pola…
Enumerationr/w
Enumerated Values:
1radio1p0
2radio1p1HS
3radio1p1FD
4radio2p0Xpic
5radio2p2XpicHS
6radio2p2XpicFD
7radioNp1
8radio1p0XpicH
9radio1p0XpicV
 .1.3.6.1.4.1.3373.1103.80.6.1.2
linkLabel
A textual string containing information about the link.
This string should give more details about link specific
parameters.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.3373.1103.80.6.1.3
linkIfIndex
This object defines a greater than zero value
to identify a link in ifTable or a zero
value if ifTable is not supported.
IF-MIBInterfaceIndexOrZero
Textual Convention: IF-MIBInterfaceIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.3373.1103.80.6.1.4
linkRowstatus
Status of this row of linkTable. This object is used to manage the
creation and deletion of conceptual rows in linkTable.
To create a row in this table, a manager should set rowstatus to
createAndWait(5) and choose a l…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3373.1103.80.6.1.5

linkChTable

table
.1.3.6.1.4.1.3373.1103.80.7 · 1 row entry · 4 columns
Open in standard view 
A list of link channel entries.
linkChEntry entry .1.3.6.1.4.1.3373.1103.80.7.1
An entry containing management information applicable to a
particular link channel.
Indexes
linkIndex linkChIndex
Column Syntax OID
linkChIndex
Link Channel Index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.7.1.1
linkChRadioIdx
Radio channel index that corresponds to an
available radio interface in radioTable.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.7.1.2
linkChRadioSettingsIdx
Radio Settings Index. This object is a foreign
key for a corresponding radioSettingsTable entry,
which is automatically created by agent.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.7.1.3
linkChRowstatus
Status of this row of linkChTable. This object is used
to manage the creation and deletion of conceptual rows in
linkChTable.
To create a row in this table, a manager should set rowstatus to
createAndWait(5). Until i…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3373.1103.80.7.1.4

linkSettingsTable

table
.1.3.6.1.4.1.3373.1103.80.8 · 1 row entry · 10 columns
Open in standard view 
Table with link settings entries. This table contains all
parameters of a radio frequency link. The content of this
table can be changed by a manager if linkRowStatus is 
notInService(2).
linkSettingsEntry entry .1.3.6.1.4.1.3373.1103.80.8.1
Radio link entry
Indexes
linkIndex
Column Syntax OID
linkBandwidthAndModulation
Link Modulation and Bandwidth (channel spacing).
The value of this object value is computed by:
65536*modulation+bandwidth
where bandwidth selection is:
0 = 3.5MHz
1 = 7MHz
2 = 14MHz
3 = 28MHz
4 = 56M…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.8.1.1
linkAcmEngineEnable
This object is used to enable/disable the ACM engine
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.8.1.2
linkTxUpperProfile
The object (and linkTxLowerProfile object) is used to
restrict the TX profile range when ACM is enabled.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.8.1.3
linkTxLowerProfile
The object (and linkTxUpperProfile object) is used to
restrict the TX profile range when ACM is enabled.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.8.1.4
linkId
Link Identification (value 0..255)
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.3373.1103.80.8.1.5
linkTxPwrThresh
Threshold (value +3 , +15 dB) relative to nominal value of the TX power
below wich the related alarm is set.
Integer32r/w
Constraints:
range: 3-15
 .1.3.6.1.4.1.3373.1103.80.8.1.6
linkRxPwrThresh
Threshold (value -40 , -99 dBm) for RX power below wich the related
alarm is set.
Integer32r/w
Constraints:
range: -99--40
 .1.3.6.1.4.1.3373.1103.80.8.1.7
linkSynchSetupProtocolEnable
Synchronization Setup Protocol (SSP) control
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.8.1.8
linkProfilesSetSelection
Selection of the working profile set between high gain
(max robustness) profile set and high throughput (max
capacity) profile set. The set of profiles high gain
features a greater robustness against to the set of
profi…
Enumerationr/w
Enumerated Values:
1highThroughput
2highGain
 .1.3.6.1.4.1.3373.1103.80.8.1.9
linkXpicControlProcedure
Set by manager to enable\disable XPIC alarm control procedure.
Only for XPIC configurations.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.8.1.10

radioSettingsTable

table
.1.3.6.1.4.1.3373.1103.80.9 · 1 row entry · 11 columns
Open in standard view 
Table with radio settings entries. This table contains all
parameters of a radio terminal. The content of this table
can be changed only linkRowStatus is notInService(2)
radioSettingsEntry entry .1.3.6.1.4.1.3373.1103.80.9.1
Radio terminal entry
Indexes
radioSettingsIndex
Column Syntax OID
radioSettingsIndex
Radio settings index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.9.1.1
radioSettingsRowStatus
Status of this row.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3373.1103.80.9.1.2
radioSettingsLabel
A textual string containing information about the radio
interface.
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3373.1103.80.9.1.3
radioTxFrequency
Transmitted frequency in KHz. Null value means invalid frequency.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.9.1.4
radioDuplexFrequency
Value of duplex frequency in KHz. -2 means not set.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.9.1.5
radioTxAttenuation
Transmitter attenuation relative to nominal power (dBm).
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.9.1.6
radioAtpcManual
Enables/disables Atpc Manual operation.
When the feature is enabled there are 2 behaviour:
- (enable) after an air los the ODU transmits the maximum available power
- (enable-min-power) after an air los the ODU transmit…
Enumerationr/w
Enumerated Values:
1disable
2enable
3enable-min-power
 .1.3.6.1.4.1.3373.1103.80.9.1.7
radioAtpcPwrHigh
ATPC Control - Local Rx Power High (dBm range -30 to -80) -.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.9.1.8
radioAtpcPwrLow
ATPC Control - Local Rx Power Low (dBm range -30 to -80) -.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.9.1.9
radioAtpcRange
Defines the range of the ATPC regulation (expressed in dB) with respect
to the current value of maximum Tx output, that is intended as the upper
limit of the range. A null value means no limit: the lower limit
of the ra…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.9.1.10
radioFreqTableSelection
RadioFrequencyTable key (channel spacing & modulation) selection.
ChannelSpacingr/w
Textual Convention: ChannelSpacing Enumeration
Type Values:
0bw3M5Hz
1bw7Mhz
2bw14MHz
3bw28MHz
4bw56MHz
5bw40MHz
6bw112MHz
7bw250Mhz
8bw500Mhz
9bw750Mhz
10bw1000Mhz
11bw10Mhz
12bw20Mhz
13bw30Mhz
14bw50Mhz
15bw60Mhz
16bw80Mhz
17bw2000Mhz
18bw62M5hz
19bw125Mhz
20bw1500Mhz
 .1.3.6.1.4.1.3373.1103.80.9.1.11

tdmSettingsTable

table
.1.3.6.1.4.1.3373.1103.80.10 · 1 row entry · 3 columns
Open in standard view 
Table with tdm settings entries.
tdmSettingsEntry entry .1.3.6.1.4.1.3373.1103.80.10.1
An entry containing tdm parameters for a particular link.
Indexes
linkIndex tdmPolIndex
Column Syntax OID
tdmPolIndex
Polarization index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.10.1.1
tdmE1Channel
Number of E1 channels. This object is used to define the capacity
of E1 tributaries assigned to a given radio link. The capacity is
changed in steps of E1 (2Mbit/s).
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.10.1.2
tdmE1Framer
This object is used to attach the framer to a given E1.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.10.1.3

radioCapabilitiesTable

table
.1.3.6.1.4.1.3373.1103.80.11 · 1 row entry · 7 columns
Open in standard view 
Table with RadioCapabilities entries: there is an entry for each 
radioTable rows.
radioCapabilitiesEntry entry .1.3.6.1.4.1.3373.1103.80.11.1
RadioCapabilities entry.
Indexes
radioIndex
Column Syntax OID
radioCapabilitiesCapability
Bit map to describe the radio features.
RadioCapability
Textual Convention: RadioCapability Bits
Type Values:
0reserved
1trafficSquelch
2baseBandLoop
3maxPower
4carrierOnly
5iQLoop
6rfLoopGivenMod
7rfLoopAnyMod
8iQLoopAtRxFreq
9atpcMinPower
10echoCanceler
 .1.3.6.1.4.1.3373.1103.80.11.1.1
radioCapabilitiesTxMinFrequency
Minimum of available channel frequency in KHz.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.11.1.2
radioCapabilitiesTxMaxFrequency
Maximum of available channel frequency in KHz.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.11.1.3
radioCapabilitiesStepFrequency
Minimum frequency step in KHz.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.11.1.4
radioCapabilitiesMinPtxNominalValue
Minimum nominal Ptx in dBm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.11.1.5
radioCapabilitiesMaxPtxNominalValue
Maximum nominal Ptx in dBm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.11.1.6
radioCapabilitiesExtendedMinPwr
Minimum extended Ptx power for fade margin.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.11.1.7

radioStatusTable

table
.1.3.6.1.4.1.3373.1103.80.12 · 1 row entry · 29 columns
Open in standard view 
Table with RadioStatus records: one record for 1+0 configuration and
two record for 1+1 configuration.
radioStatusEntry entry .1.3.6.1.4.1.3373.1103.80.12.1
RadioStatus record.
Indexes
radioIndex
Column Syntax OID
radioCurrentDuplexFrequency
Spacing between transmitted and received frequency in KHz.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.12.1.1
radioTxChannelSpacing
Half of transmitted signal channel spacing in KHz.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.12.1.2
radioPrx
Received power level (dBm).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.12.1.3
radioPtx
Transmitted power level (dBm).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.12.1.4
radioNormalizedMse
Normalized MSE (Mean Squared Error) is an indicator of the Signal
to Noise (S/N) ratio. It's in 0.1 dB steps
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.12.1.5
radioRxActiveStatus
Receiver Active status with associated Severity
In 1+1 Hot Standby radio system, only one RX is active.
RXs are active in other configurations of the radio system.
Enumeration
Enumerated Values:
1cleared
2active
 .1.3.6.1.4.1.3373.1103.80.12.1.6
radioTxActiveStatus
Transmitter Active status with associated Severity.
In 1+1 Hot Standby radio system, only one TX is active.
TXs are active in other configurations of the radio system.
Enumeration
Enumerated Values:
1cleared
2active
 .1.3.6.1.4.1.3373.1103.80.12.1.7
radioCableOpenAlarm
Cable connnecting ODU is open: alarm status with associated
severity.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.8
radioCableShortAlarm
Cable connnecting ODU is in short-circuit: alarm status
with associated severity.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.9
radioInvalidFrequencyAlarm
Invalid frequency alarm with associated severity.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.10
radioBaseBandRxAlarm
Base Band Rx alarm status with associated severity.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.11
radioModulatorFailAlarm
Modulator Fail Alarm status with associated severity.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.12
radioDemodulatorFailAlarm
Demodulator Fail Alarm status with associated severity.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.13
radioRxPowerLowAlarm
Receiver power low alarm status with associated severity.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.14
radioTxPowerLowAlarm
Transmitter power low alarm status with associated severity.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.15
radioRemDemodulatorFailAlarm
Remote Demodulator Fail Alarm status with associated severity.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.16
radioVcoFailAlarm
RT VCO fail alarm status with associated severity.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.17
radioRxIFAgcAlarm
RT Rx IF AGC fail alarm status with associated severity.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.18
radioTxIFAgcAlarm
RT Tx IF AGC fail alarm status with associated severity.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.19
radioIduOduCommunicationAlarm
Communication from IDU towards ODU is down
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.20
radioOduIduCommunicationAlarm
Communication from ODU towards IDU is down
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.21
radioLocalOduAlarmSynthesis
Local ODU alarm synthesis with associated severity.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.22
radioRemoteOduAlarmSynthesis
Local ODU alarm synthesis alarm status with associated severity.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.23
radioConfigMismatchAlarm
Config Mismatch alarm status with associated severity and related map.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.24
radioConfigAlarmReason
Bit map to describe the Config Mismatch Alarm
ConfigMismatchReason
Textual Convention: ConfigMismatchReason Bits
Type Values:
0securityMismatch
1frequencyFailMismatch
2frequencyAlertMismatch
3ptxMismatch
4channelSpacingAndModulationMismatch
5remoteConfigurationMismatch
6acmMismatch
7profileSetMismatch
 .1.3.6.1.4.1.3373.1103.80.12.1.25
radioRxQualityLowAlarm
High BER Alarm status with associated severity.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.26
radioRxQualityWarningAlarm
The RX signal is close to cause errors on payload.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.27
radioXpd
Cross-Polarization Discrimination, in tenths of dB, is the
difference between the received signal power of the
co-polarized main beam, and it componemt received on the
cross-polarized signal.
This object shows an extima…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.12.1.28
radioXpicAlarm
This alarm raises when the xpic configuration isn't working
on the specified radioIndex. This could be due to an external
issue in case of cable connection or to an internal issue in
case of an integrated system. The ro…
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.12.1.29

radioMaintTable

table
.1.3.6.1.4.1.3373.1103.80.13 · 1 row entry · 8 columns
Open in standard view 
Table with Command for maintenance of radio branch.
Objects in this table is not persistent. An Instance of this
table is created on creation of radioBranchEntry
radioMaintEntry entry .1.3.6.1.4.1.3373.1103.80.13.1
Radio branch Maintenance record.
Indexes
radioIndex
Column Syntax OID
radioTxStatus
Transmitter status control.
The value transmitterOff(1) is related to a manual operation.
The value permanentOff(3) is persistent across restart.
Enumerationr/w
Enumerated Values:
1transmitterOff
2transmitterOn
3permanentOff
 .1.3.6.1.4.1.3373.1103.80.13.1.1
radioCarrierOnly
Carrier only transmission control.
Enumerationr/w
Enumerated Values:
1carrierOnlyOff
2carrierOnlyOn
 .1.3.6.1.4.1.3373.1103.80.13.1.2
radioLoop
Enables/disables the Radio Branch loops.
Enumerationr/w
Enumerated Values:
1loopOff
2rfLoop
3iqLoop
4baseBandLoop
6rfLoopAtFixedMod
7baseBandLoopEthSquelch
8rfLoopAtFixedModEthSquelch
9iqloopEthSquelch
 .1.3.6.1.4.1.3373.1103.80.13.1.3
radioRFLoopTestResult
Radio branch RT loop test result.
Enumeration
Enumerated Values:
0testNone
1testRunning
2testNotPossible
3testPassed
4testFail
5testInterrupted
 .1.3.6.1.4.1.3373.1103.80.13.1.4
radioRFLoopTestPercTime
Radio branch RT loop test time percentage
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.3373.1103.80.13.1.5
radioRtPsuOff
It switches on/off the Rt power supply
Enumerationr/w
Enumerated Values:
1rtPsuOff
2rtPsuOn
 .1.3.6.1.4.1.3373.1103.80.13.1.6
radioLom
It is used to enable the IP packet forwarding towards Radio.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.13.1.7
radioXpic
Enable of the cross polarization interference cancellation of this
radio. The value disable is tied to a manual operation
(ManOpRecord). This object is applicable only if thiis radio
belongs to a 2+0 XPIC or 2+2 XPIC l…
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.13.1.8

radioFrequencyTable

table
.1.3.6.1.4.1.3373.1103.80.14 · 1 row entry · 3 columns
Open in standard view 
Availables channels for selected channel spacing and modulation 
(see leaf radioFreqTableSelection).
radioFreqTabEntry entry .1.3.6.1.4.1.3373.1103.80.14.1
RadioFreqTab record.
Indexes
radioIndex radioFreqChannelId
Column Syntax OID
radioFreqChannelId
Index of the table
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.14.1.1
radioFreqChannelNum
Available channel number.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.14.1.2
radioFreqValue
Frequency related to radioFreqChannelNum.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.14.1.3

radioDuplexFrequencyTable

table
.1.3.6.1.4.1.3373.1103.80.15 · 1 row entry · 2 columns
Open in standard view 
Table with available duplex frequencies. Duplex frequency is
the absolute value of difference between RX and TX frequency.
radioDuplexFreqEntry entry .1.3.6.1.4.1.3373.1103.80.15.1
Duplex Frequency entry. There is an entry for each available
duplex frequency.
Indexes
radioIndex radioDuplexFreqId
Column Syntax OID
radioDuplexFreqId
Index of the table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.15.1.1
radioDuplexFreqValue
Duplex frequency in KHz.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.15.1.2

radioModulationTable

table
.1.3.6.1.4.1.3373.1103.80.16 · 1 row entry · 3 columns
Open in standard view 
List of modulations related to channel spacing.
radioModulationEntry entry .1.3.6.1.4.1.3373.1103.80.16.1
radioModulation record.
Indexes
radioIndex radioChannelSpacing
Column Syntax OID
radioChannelSpacing
This object identifies the channel spacing.
ChannelSpacing
Textual Convention: ChannelSpacing Enumeration
Type Values:
0bw3M5Hz
1bw7Mhz
2bw14MHz
3bw28MHz
4bw56MHz
5bw40MHz
6bw112MHz
7bw250Mhz
8bw500Mhz
9bw750Mhz
10bw1000Mhz
11bw10Mhz
12bw20Mhz
13bw30Mhz
14bw50Mhz
15bw60Mhz
16bw80Mhz
17bw2000Mhz
18bw62M5hz
19bw125Mhz
20bw1500Mhz
 .1.3.6.1.4.1.3373.1103.80.16.1.1
radioModulationMap
List of modulations in the radioChanSpacing
ModulationMap
Textual Convention: ModulationMap Bits
Type Values:
0modBPSK
1mod4QAM
2mod8PSK
3mod16QAM
4mod32QAM
5mod64QAM
6mod128QAM
7mod256QAM
8mod512QAM
9mod1024QAM
10mod2048QAM
11mod4096QAM
 .1.3.6.1.4.1.3373.1103.80.16.1.2
radioRefModulationMap
List of modulations that can be selected as reference
in the radioChanSpacingId
ModulationMap
Textual Convention: ModulationMap Bits
Type Values:
0modBPSK
1mod4QAM
2mod8PSK
3mod16QAM
4mod32QAM
5mod64QAM
6mod128QAM
7mod256QAM
8mod512QAM
9mod1024QAM
10mod2048QAM
11mod4096QAM
 .1.3.6.1.4.1.3373.1103.80.16.1.3

linkStatusTable

table
.1.3.6.1.4.1.3373.1103.80.17 · 1 row entry · 26 columns
Open in standard view 
Table with LinkStatusEntry.
linkStatusEntry entry .1.3.6.1.4.1.3373.1103.80.17.1
Link status entry
Indexes
linkIndex linkPolIndex
Column Syntax OID
linkPolIndex
This object identifies the radio polarization. In XPIC radio link
identifies one of the polarizations.
Integer32
Constraints:
range: 1-2
 .1.3.6.1.4.1.3373.1103.80.17.1.1
linkAcmRxProfile
This object reports the ACM profile number in use in the radio Rx.
It is the linkAcmProfileId of linkAcmTable.
Label is linkAcmProfileLabel from linkAcmTable
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.17.1.2
linkAcmTxProfile
This object reports the ACM profile number in use in the radio Tx.
It is the linkAcmProfileId of linkAcmTable.
Label is linkAcmProfileLabel from linkAcmTable
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.17.1.3
linkAcmRxProfileLabel
ASCII string used to describe current acm rx profile
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3373.1103.80.17.1.4
linkAcmTxProfileLabel
ASCII string used to describe current acm tx profile
OctetString
Constraints:
range: 0-32
 .1.3.6.1.4.1.3373.1103.80.17.1.5
linkAcmRxModulation
This object is the type of modulation of the Rx profile in use.
BitsPerSymbol
Textual Convention: BitsPerSymbol Enumeration
Type Values:
1bpsBPSK
2bps4QAM
3bps8PSK
4bps16QAM
5bps32QAM
6bps64QAM
7bps128QAM
8bps256QAM
9bps512QAM
10bps1024QAM
11bps2048QAM
12bps4096QAM
 .1.3.6.1.4.1.3373.1103.80.17.1.6
linkAcmTxModulation
This object is the type of modulation of the Tx profile in use.
BitsPerSymbol
Textual Convention: BitsPerSymbol Enumeration
Type Values:
1bpsBPSK
2bps4QAM
3bps8PSK
4bps16QAM
5bps32QAM
6bps64QAM
7bps128QAM
8bps256QAM
9bps512QAM
10bps1024QAM
11bps2048QAM
12bps4096QAM
 .1.3.6.1.4.1.3373.1103.80.17.1.7
linkAcmRxCode
This object is the type of codificator of the Rx profile in use.
Enumeration
Enumerated Values:
0unknown
1normal
2strong
 .1.3.6.1.4.1.3373.1103.80.17.1.8
linkAcmTxCode
This object is the type of codificator of the Tx profile in use.
Enumeration
Enumerated Values:
0unknown
1normal
2strong
 .1.3.6.1.4.1.3373.1103.80.17.1.9
linkTxETHCapacity
This object reports (in Kbits/sec) the transmitted payload
capacity used by the Ethernet
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.17.1.10
linkRxETHCapacity
This object reports (in Kbits/sec) the received payload capacity
used by the Ethernet
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.17.1.11
linkTxTDMCapacity
This object reports the capacity in kbit/sec reserved to TDM
tributaries in tx ACM profile.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.17.1.12
linkRxTDMCapacity
This object reports the capacity in kbit/sec reserved to TDM
tributaries in rx ACM profile.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.17.1.13
linkRescueModulation
This object is the modulation used when the remote terminal is
unreachable, ie traffic on radio link is down.
BitsPerSymbol
Textual Convention: BitsPerSymbol Enumeration
Type Values:
1bpsBPSK
2bps4QAM
3bps8PSK
4bps16QAM
5bps32QAM
6bps64QAM
7bps128QAM
8bps256QAM
9bps512QAM
10bps1024QAM
11bps2048QAM
12bps4096QAM
 .1.3.6.1.4.1.3373.1103.80.17.1.14
linkReducedCapacityAlarm
The equipment works in reduced capacity
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.17.1.15
linkLinkTelemetryFailAlarm
Fail of link telemetry communication channel with associated
Severity
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.17.1.16
linkIdMismatchAlarm
Link Identification Alarm with associated Severity
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.17.1.17
linkRadioEocAlarm
Fail of Radio Eoc link communication channel with associated
Severity
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.17.1.18
linkSetupMismatchAlarm
The local setup doesn't match the setup of remote terminal
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.17.1.19
linkRescueSetupAlarm
The equipment is using the setup relative to the rescue modulation
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.17.1.20
linkXpicProcedureBlockAlarm
Only for XPIC equipment configurations.
Equipment Controller XPIC procedure Alarm control with associated
Severity
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.17.1.21
linkXpicRemTxOffAlarm
Only for XPIC equipment configurations.
Remote TX OFF command with associated Severity
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.17.1.22
linkRemoteIduAlarmSynthesis
Synthesis of the remote IDU alarms
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.17.1.23
linkNotMatchingRadiosAlarm
Radios of the link does not have matched parameters.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.17.1.24
linkConfigurationInProgress
The link is being configured and the table linkSettingsTable is
not available for modifying parameters.
Enumeration
Enumerated Values:
1cleared
2active
 .1.3.6.1.4.1.3373.1103.80.17.1.25
linkXpd deprecated
Cross-Polarization Discrimination, in tenths of dB, is the
difference between the received signal power of the
co-polarized main beam, and it componemt received on the
cross-polarized signal.
This object shows an extima…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.17.1.26

linkTfcTable

table deprecated
.1.3.6.1.4.1.3373.1103.80.18 · 1 row entry · 6 columns
Open in standard view 
Transmitter Fail Check feature. In 1+1 HS configuration, the
radio terminal that doesn't receive signals on both receivers,
requests the remote transmitter switch.
          
This table was deprecated and replaced by linkTfcV2Table.
It is a view of the rows of the linkTfcV2Table with the same
linkIndex and linkPolIndex equal to 1, in order to ensure
compatibility with old SNMP managers.
linkTfcEntry entry .1.3.6.1.4.1.3373.1103.80.18.1
Radio link TFC entry.
Indexes
linkIndex
Column Syntax OID
linkTfcAction deprecated
reset: to clear the forced switch generated by Trasmission Fail
Check algorithm (only if 1+1 configuration and ISO system).
Enumerationr/w
Enumerated Values:
0notActive
1reset
 .1.3.6.1.4.1.3373.1103.80.18.1.1
linkTfcControl deprecated
It enables the Tx switch from remote equipment (only if 1+1
configuration and ISO system).
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.18.1.2
linkTfcWatchWindow deprecated
Watch Window (in seconds) related to Trasmission Fail Check
algorithm (only if 1+1 configuration and ISO system).
Integer32r/w
Constraints:
range: 1-300
 .1.3.6.1.4.1.3373.1103.80.18.1.3
linkTfcAlarmThreshold deprecated
Alarm Threshold (number of seconds with both remote RX in fail)
related to Trasmission Fail Check algorithm (only if 1+1
configuration and ISO system).
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.3373.1103.80.18.1.4
linkTfcAlarm deprecated
Transmission switch alarm generated by Trasmission Fail Check
algorithm (only if 1+1 configuration and ISO system).
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.18.1.5
linkTfcRowStatus deprecated
Status of this conceptual row in linkTfcTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3373.1103.80.18.1.6

linkMaintTable

table
.1.3.6.1.4.1.3373.1103.80.19 · 1 row entry · 4 columns
Open in standard view 
Table with commands for maintenance of radio link.
Objects in this table is not persistent. An Instance of this
table is created on creation of linkStatusEntry
linkMaintEntry entry .1.3.6.1.4.1.3373.1103.80.19.1
Radio link maintenance entry.
Indexes
linkIndex linkPolIndex
Column Syntax OID
linkBerStart
Stop, Start (resetting errors and counters) the pattern.
This item is linked to a manual operation (ManOpRecord) instance.
Enumerationr/w
Enumerated Values:
1restart
2stop
 .1.3.6.1.4.1.3373.1103.80.19.1.1
linkBaseBandLom
It is used to enable the IP packet forwarding towards modems.
This item is linked to a manual operation (ManOpRecord) instance.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.19.1.2
linkFadeMarginMeasure deprecated
Set by manager to start/stop fade margin measure.
This item is linked to a manual operation (ManOpRecord) instance.
This object is deprecated and replaced by fadeMarginMeasure.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.19.1.3
linkXpicControlProcedureReset
Set by manager to reset the XPIC control procedure after a
blocking action.
Enumerationr/w
Enumerated Values:
0notActive
1reset
 .1.3.6.1.4.1.3373.1103.80.19.1.4

linkBerTable

table
.1.3.6.1.4.1.3373.1103.80.20 · 1 row entry · 7 columns
Open in standard view 
Table with Command to estimate BER  of radio equipment.
Every objects in this table is not persistent. An Instance of this
table is created on creation of linkStatusEntry
linkBerEntry entry .1.3.6.1.4.1.3373.1103.80.20.1
Radio equipment BER estimate record.
Indexes
linkIndex linkPolIndex
Column Syntax OID
linkBerErrorCounterH
High 32 bit part of the 64 bit error counter. Bit 32-63.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3373.1103.80.20.1.1
linkBerErrorCounterL
Low 32 bit part of the 64 bit error counter. Bit 0-31.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3373.1103.80.20.1.2
linkBerDataCounterH
High 32 bit part of the 64 bit data counter. Bit 32-63.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3373.1103.80.20.1.3
linkBerDataCounterL
Low 32 bit part of the 64 bit data counter. Bit 0-31.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.3373.1103.80.20.1.4
linkBerSyncLossAlarm
BER sync loss alarm.
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.20.1.5
linkBerSyncLossAlarmCounter
BER sync loss events counter.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.20.1.6
linkBerElapsedTime
BER measure elapsed time.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.20.1.7

linkAcmTable

table
.1.3.6.1.4.1.3373.1103.80.21 · 1 row entry · 15 columns
Open in standard view 
Table with link records.
linkAcmEntry entry .1.3.6.1.4.1.3373.1103.80.21.1
ACM entries.
Indexes
linkIndex linkPolIndex linkAcmProfileId
Column Syntax OID
linkAcmProfileId
This object identifies the profile number for the radio selected
by the object linkAcmId.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.21.1.1
linkAcmProfileModulation
This object is the modulation of the profile.
BitsPerSymbol
Textual Convention: BitsPerSymbol Enumeration
Type Values:
1bpsBPSK
2bps4QAM
3bps8PSK
4bps16QAM
5bps32QAM
6bps64QAM
7bps128QAM
8bps256QAM
9bps512QAM
10bps1024QAM
11bps2048QAM
12bps4096QAM
 .1.3.6.1.4.1.3373.1103.80.21.1.2
linkAcmProfileCode
This object is the type of codificator of the profile.
Enumeration
Enumerated Values:
1normal
2strong
 .1.3.6.1.4.1.3373.1103.80.21.1.3
linkAcmProfileCapacity
This object is used to contain total capacity of profile
(in kbits/sec).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.21.1.4
linkAcmProfileLabel
ASCII string used to assign a name to profile.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.3373.1103.80.21.1.5
linkAcmProfileEnable
The object is used to contain if the use of this profile is
enabled or disabled
Enumeration
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.21.1.6
linkAcmMaxTDMCapacity deprecated
This object reports the maximum capacity that can
be assigned to the TDM traffic.
The capacity is specified in number of E1 (2Mbit/s).

This object has been superseded by linkE1vsSTM1CapacityTable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.21.1.7
linkAcmPowerScaling deprecated
This object contains the difference (in eighth of dB) between the
TX power at this profile modulation and the TX power at the
reference modulation. The power scaling value is achieved from the
table linkPtxProfileTable.…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.21.1.8
linkAcmDownshiftThreshold
The object is used to contain the downshift threshold in dB/10.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.21.1.9
linkAcmUpshiftThreshold
The object is used to contain the upshift threshold in dB/10.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.21.1.10
linkAcmActiveProfile
This object is used to contain the active status of this profile.
The value of the object is related to linkAcmRxProfile
and linkAcmTxProfile of the LinkStatusEntry.
Enumeration
Enumerated Values:
1cleared
2activeRx
3activeTx
4activeBoth
 .1.3.6.1.4.1.3373.1103.80.21.1.11
linkAcmTDMCapacity
This object reports current TDM capacity (in kbits/sec)
of the profile.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.21.1.12
linkAcmETHCapacity
This object reports current ETH capacity (in Kbits/sec) of
the profile.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.21.1.13
linkAcmAtpcRxPowerScaling deprecated
This object contains the difference (in eighth of dB) between the
ATPC RX level thresholds at this profile modulation and the ATPC
RX level thresholds at the upper modulation.
This object is deprecated: see combinedRadi…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.21.1.14
linkAcmPowerRange deprecated
This object contains (in dB) the current value of ATPC range.
This object is deprecated: see combinedRadioPowerScalingTable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.21.1.15

linkProTable

table deprecated
.1.3.6.1.4.1.3373.1103.80.22 · 1 row entry · 10 columns
Open in standard view 
A list of protection link entries.
          
This table was deprecated and replaced by linkProV2Table.
It is a view of the rows of the linkProV2Table with the same
linkIndex and linkPolIndex equal to 1, in order to ensure
compatibility with old SNMP managers
linkProEntry entry .1.3.6.1.4.1.3373.1103.80.22.1
An entry containing management information applicable to a
protected link.
Indexes
linkIndex
Column Syntax OID
linkProProtectionTxChIdx deprecated
This object identifies the tx protection channel
of a protected link. This object is not applicable
in case of not-revertive protection. For N+1 links
a value different from zero must be set.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.22.1.1
linkProProtectionRxChIdx deprecated
This object identifies the rx protection channel
of a protected link. This object is not applicable
in case of not-revertive protection. For N+1 links
a value different from zero must be set.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.22.1.2
linkProTxWtrTime deprecated
It defines the Wait Time (in minutes) to Restore in transmission
when revertive protection is enabled. Zero value means no switch.
If switch is not supported or protection is not revertive,
a value different from zero…
Integer32r/w
Constraints:
range: 0-12
 .1.3.6.1.4.1.3373.1103.80.22.1.3
linkProRxWtrTime deprecated
It defines the Wait Time (in minutes) to Restore in reception when
revertive protection is enabled. Zero value means no switch.
If switch is not supported or protection is not revertive,
a value different from zero ca…
Integer32r/w
Constraints:
range: 0-12
 .1.3.6.1.4.1.3373.1103.80.22.1.4
linkProTxSwitchedChIdx deprecated
This object reports the index of tx channel switched to protection.
This object is applicable only for N+1 protection schema.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.22.1.5
linkProRxSwitchedChIdx deprecated
This object reports the index of rx channel switched to protection.
This object is applicable only for N+1 protection schema.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.22.1.6
linkProTxRevertive deprecated
It defines if tx protection is revertive or not revertive.
In case of N+1 protection, protection is always revertive.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.22.1.7
linkProRxRevertive deprecated
It defines if rx protection is revertive or not revertive.
In case of N+1 protection, protection is always revertive.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.22.1.8
linkProExtraTraffic deprecated
This object enables or disables the transfer of extra traffic
on the protection channel in a N+1 link. This object must be
set to disabled in case of architectures different for N+1.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.22.1.9
linkProRowStatus deprecated
Status of this conceptual row in linkProTable.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3373.1103.80.22.1.10

linkProMaintTable

table deprecated
.1.3.6.1.4.1.3373.1103.80.23 · 1 row entry · 6 columns
Open in standard view 
A list of maintenance commands for protected links.
A row in this table is added on creation of a row
in linkProTable.
          
This table was deprecated and replaced by linkProMaintV2Table.
It is a view of the rows of the linkProMaintV2Table with the same
linkIndex and linkPolIndex equal to 1, in order to ensure
compatibility with old SNMP managers
linkProMaintEntry entry .1.3.6.1.4.1.3373.1103.80.23.1
An entry containing maintenance commands applicable to a
protected link.
Indexes
linkIndex
Column Syntax OID
linkProMaintTxLockout deprecated
Command to enable/disable tx lockout. This object
is applicable only in case of N+1 protections.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.23.1.1
linkProMaintRxLockout deprecated
Command to enable/disable rx lockout. This object
is applicable only in case of N+1 protections.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.23.1.2
linkProMaintTxForced deprecated
Command to force switch to a given
transmission channel. Zero value means no
switch.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.23.1.3
linkProMaintRxForced deprecated
Command to force switch to a given
receiving channel. Zero value means no
switch.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.23.1.4
linkProMaintTxWtrReset deprecated
Clear wait time to restore making the revertive
path immediately available.
Enumerationr/w
Enumerated Values:
1notActive
2on
 .1.3.6.1.4.1.3373.1103.80.23.1.5
linkProMaintRxWtrReset deprecated
Clear wait time to restore making the revertive
path immediately available.
Enumerationr/w
Enumerated Values:
1notActive
2on
 .1.3.6.1.4.1.3373.1103.80.23.1.6

linkCapabilitiesTable

table deprecated
.1.3.6.1.4.1.3373.1103.80.24 · 1 row entry · 7 columns
Open in standard view 
Table with RadioCapabilities entries: there is an entry for each 
linkTable row.
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios.
In 1+1 FD radio link, managers have to know the capabilities 
of each channel. As such, this table is declared deprecated and
replaced by combinedRadioCapabilitiesTable.
linkCapabilitiesEntry entry .1.3.6.1.4.1.3373.1103.80.24.1
LinkCapabilities entry.
Indexes
linkIndex
Column Syntax OID
linkCapabilitiesCapability deprecated
Bit map to describe the radio features.
RadioCapability
Textual Convention: RadioCapability Bits
Type Values:
0reserved
1trafficSquelch
2baseBandLoop
3maxPower
4carrierOnly
5iQLoop
6rfLoopGivenMod
7rfLoopAnyMod
8iQLoopAtRxFreq
9atpcMinPower
10echoCanceler
 .1.3.6.1.4.1.3373.1103.80.24.1.1
linkCapabilitiesTxMinFrequency deprecated
Minimum of available channel frequency in KHz.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.24.1.2
linkCapabilitiesTxMaxFrequency deprecated
Maximum of available channel frequency in KHz.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.24.1.3
linkCapabilitiesStepFrequency deprecated
Minimum frequency step in KHz.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.24.1.4
linkCapabilitiesMinPtxNominalValue deprecated
Minimum nominal Ptx in dBm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.24.1.5
linkCapabilitiesMaxPtxNominalValue deprecated
Maximum nominal Ptx in dBm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.24.1.6
linkCapabilitiesExtendedMinPwr deprecated
Minimum extended Ptx power for fade margin.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.24.1.7

linkFrequencyTable

table deprecated
.1.3.6.1.4.1.3373.1103.80.25 · 1 row entry · 3 columns
Open in standard view 
Availables channels for selected channel spacing and modulation 
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios.
In 1+1 FD radio link, managers have to know the allowable 
frequencies of each channel. As such, this table is declared
deprecated and replaced by combinedRadioFrequencyTable.
linkFreqTabEntry entry .1.3.6.1.4.1.3373.1103.80.25.1
LinkFreqTab record.
Indexes
linkIndex linkFreqChannelId
Column Syntax OID
linkFreqChannelId deprecated
Index of the table
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.25.1.1
linkFreqChannelNum deprecated
Available channel number.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.25.1.2
linkFreqValue deprecated
Frequency related to linkFreqChannelNum.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.25.1.3

linkDuplexFrequencyTable

table deprecated
.1.3.6.1.4.1.3373.1103.80.26 · 1 row entry · 2 columns
Open in standard view 
Table with available duplex frequencies. Duplex frequency is
the absolute value of difference between RX and TX frequency.
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios.
In 1+1 FD radio link, managers have to know the allowable 
duplex frequencies of each channel. As such, this table is declared
deprecated and replaced by combinedRadioDuplexFrequencyTable.
linkDuplexFreqEntry entry .1.3.6.1.4.1.3373.1103.80.26.1
Duplex Frequency entry. For each available duplex frequency
Indexes
linkIndex linkDuplexFreqId
Column Syntax OID
linkDuplexFreqId deprecated
Index of the table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.26.1.1
linkDuplexFreqValue deprecated
Duplex frequency in KHz.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.26.1.2

linkModulationTable

table
.1.3.6.1.4.1.3373.1103.80.27 · 1 row entry · 3 columns
Open in standard view 
List of modulation related to channel spacing.
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios.
linkModulationEntry entry .1.3.6.1.4.1.3373.1103.80.27.1
linkModulation record.
Indexes
linkIndex linkChannelSpacing
Column Syntax OID
linkChannelSpacing
This object identifies the channel spacing.
ChannelSpacing
Textual Convention: ChannelSpacing Enumeration
Type Values:
0bw3M5Hz
1bw7Mhz
2bw14MHz
3bw28MHz
4bw56MHz
5bw40MHz
6bw112MHz
7bw250Mhz
8bw500Mhz
9bw750Mhz
10bw1000Mhz
11bw10Mhz
12bw20Mhz
13bw30Mhz
14bw50Mhz
15bw60Mhz
16bw80Mhz
17bw2000Mhz
18bw62M5hz
19bw125Mhz
20bw1500Mhz
 .1.3.6.1.4.1.3373.1103.80.27.1.1
linkModulationMap
List of modulation in the linkChanSpacing
ModulationMap
Textual Convention: ModulationMap Bits
Type Values:
0modBPSK
1mod4QAM
2mod8PSK
3mod16QAM
4mod32QAM
5mod64QAM
6mod128QAM
7mod256QAM
8mod512QAM
9mod1024QAM
10mod2048QAM
11mod4096QAM
 .1.3.6.1.4.1.3373.1103.80.27.1.2
linkRefModulationMap
List of modulations that can be selected as reference
in the linkChanSpacingId
ModulationMap
Textual Convention: ModulationMap Bits
Type Values:
0modBPSK
1mod4QAM
2mod8PSK
3mod16QAM
4mod32QAM
5mod64QAM
6mod128QAM
7mod256QAM
8mod512QAM
9mod1024QAM
10mod2048QAM
11mod4096QAM
 .1.3.6.1.4.1.3373.1103.80.27.1.3

combinedRadioCapabilitiesTable

table
.1.3.6.1.4.1.3373.1103.80.28 · 1 row entry · 7 columns
Open in standard view 
Table with RadioCapabilities entries: there is an entry for each 
radioSettingTable row.
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios belonging to the link.
In 1+1 FD radio link, managers have to know the allowable 
duplex frequencies of each channel. As such, this table is declared
deprecated and replaced by combinedRadioCapabilitiesTable.
combinedRadioCapabilitiesEntry entry .1.3.6.1.4.1.3373.1103.80.28.1
combinedRadioCapabilities entry.
Indexes
radioSettingsIndex
Column Syntax OID
combinedRadioCapabilitiesCapability
Bit map to describe the radio features.
RadioCapability
Textual Convention: RadioCapability Bits
Type Values:
0reserved
1trafficSquelch
2baseBandLoop
3maxPower
4carrierOnly
5iQLoop
6rfLoopGivenMod
7rfLoopAnyMod
8iQLoopAtRxFreq
9atpcMinPower
10echoCanceler
 .1.3.6.1.4.1.3373.1103.80.28.1.1
combinedRadioCapabilitiesTxMinFrequency
Minimum of available channel frequency in KHz.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.28.1.2
combinedRadioCapabilitiesTxMaxFrequency
Maximum of available channel frequency in KHz.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.28.1.3
combinedRadioCapabilitiesStepFrequency
Minimum frequency step in KHz.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.28.1.4
combinedRadioCapabilitiesMinPtxNominalValue
Minimum nominal Ptx in dBm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.28.1.5
combinedRadioCapabilitiesMaxPtxNominalValue
Maximum nominal Ptx in dBm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.28.1.6
combinedRadioCapabilitiesExtendedMinPwr
Minimum extended Ptx power for fade margin.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.28.1.7

combinedRadioFrequencyTable

table
.1.3.6.1.4.1.3373.1103.80.29 · 1 row entry · 3 columns
Open in standard view 
Availables channels for selected channel spacing and modulation 
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios.
combinedRadioFreqTabEntry entry .1.3.6.1.4.1.3373.1103.80.29.1
combinedRadioFreqTab record.
Indexes
radioSettingsIndex combinedRadioFreqChannelId
Column Syntax OID
combinedRadioFreqChannelId
Index of the table
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.29.1.1
combinedRadioFreqChannelNum
Available channel number.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.29.1.2
combinedRadioFreqValue
Frequency related to combinedRadioFreqChannelNum.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.29.1.3

combinedRadioDuplexFrequencyTable

table
.1.3.6.1.4.1.3373.1103.80.30 · 1 row entry · 2 columns
Open in standard view 
Table with available duplex frequencies. Duplex frequency is
the absolute value of difference between RX and TX frequency.
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios.
combinedRadioDuplexFreqEntry entry .1.3.6.1.4.1.3373.1103.80.30.1
Duplex Frequency entry. There is an entry for each available
duplex frequency.
Indexes
radioSettingsIndex combinedRadioDuplexFreqId
Column Syntax OID
combinedRadioDuplexFreqId
Index of the table.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.30.1.1
combinedRadioDuplexFreqValue
Duplex frequency in KHz.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.30.1.2

combinedRadioPowerScalingTable

table
.1.3.6.1.4.1.3373.1103.80.31 · 1 row entry · 3 columns
Open in standard view 
List of modulation related to channel spacing.
In 1+1 HS and XPIC radio links, this table contains only values
supported by both radios.
combinedRadioPowerScalingEntry entry .1.3.6.1.4.1.3373.1103.80.31.1
radioPowerScaling record.
Indexes
radioSettingsIndex linkAcmProfileId
Column Syntax OID
combinedRadioPowerScaling
This object contains the difference (in eighth of dB) between the
TX power at this profile modulation and the TX power at the
reference modulation. The power scaling value is achieved from the
table linkPtxProfileTable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.31.1.1
combinedRadioAtpcRxPowerScaling
This object contains the difference (in eighth of dB) between the
ATPC RX level thresholds at this profile modulation and the ATPC
RX level thresholds at the upper modulation.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.31.1.2
combinedRadioPowerRange
This object contains (in dB) the current value of ATPC range.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.31.1.3

stm1BulkMappingTable

table
.1.3.6.1.4.1.3373.1103.80.32 · 1 row entry · 3 columns
Open in standard view 
Table with entries containing stm-1 bulk transport parameters 
for a particular link.
For each link are present as many rows as the STM-1 that the link
can carry in bulk mode.
stm1BulkMappingEntry entry .1.3.6.1.4.1.3373.1103.80.32.1
An row in stm1BulkSettingsTable.
Indexes
linkIndex stm1BulkPolIndex stm1BulkChanIndex
Column Syntax OID
stm1BulkPolIndex
Polarization index.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.32.1.1
stm1BulkChanIndex
STM-1 channel index.
The range of this object is from 1 to N, where N is the number
of STM-1 that a link can carry in bulk mode.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.32.1.2
stm1BulkChannel
Index of the stm-1 in stm1Table.
The SNMP agent will accept only index of a STM-1 present in
stm1Table with stm1Structure set to opaque(4).
Stm1IndexOrZeror/w
Textual Convention: Stm1IndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.3373.1103.80.32.1.3

linkE1vsSTM1CapacityTable

table
.1.3.6.1.4.1.3373.1103.80.33 · 1 row entry · 2 columns
Open in standard view 
Table with entries containing the E1 cpacity according to the
tributaries STM-1 configured to be carried in bulk mode.
linkE1vsSTM1CapacityEntry entry .1.3.6.1.4.1.3373.1103.80.33.1
An row in linkE1vsSTM1CapacityTable.
Indexes
linkIndex linkAcmProfileId linkE1vsSTM1CapacityStm1
Column Syntax OID
linkE1vsSTM1CapacityStm1
Number of tributaries STM-1 configured to be transported in
bulk mode.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.33.1.1
linkE1vsSTM1CapacityE1
Number of E1 that can be carried by this profile according to the
the tributaries STM-1 carried in bulk mode.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.33.1.2

linkTfcV2Table

table
.1.3.6.1.4.1.3373.1103.80.34 · 1 row entry · 6 columns
Open in standard view 
Transmitter Fail Check feature. In 1+1 HS configuration, the
radio terminal that doesn't receive signals on both receivers,
requests the remote transmitter switch.
linkTfcV2Entry entry .1.3.6.1.4.1.3373.1103.80.34.1
Radio link TFC entry.
Indexes
linkIndex linkPolIndex
Column Syntax OID
linkTfcV2Action
reset: to clear the forced switch generated by Trasmission Fail
Check algorithm (only if 1+1 configuration and ISO system).
Enumerationr/w
Enumerated Values:
0notActive
1reset
 .1.3.6.1.4.1.3373.1103.80.34.1.1
linkTfcV2Control
It enables the Tx switch from remote equipment (only if 1+1
configuration and ISO system).
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.34.1.2
linkTfcV2WatchWindow
Watch Window (in seconds) related to Trasmission Fail Check
algorithm (only if 1+1 configuration and ISO system).
Integer32r/w
Constraints:
range: 1-300
 .1.3.6.1.4.1.3373.1103.80.34.1.3
linkTfcV2AlarmThreshold
Alarm Threshold (number of seconds with both remote RX in fail)
related to Trasmission Fail Check algorithm (only if 1+1
configuration and ISO system).
Integer32r/w
Constraints:
range: 1-60
 .1.3.6.1.4.1.3373.1103.80.34.1.4
linkTfcV2Alarm
Transmission switch alarm generated by Trasmission Fail Check
algorithm (only if 1+1 configuration and ISO system).
SIAE-ALARM-MIBAlarmStatus
Textual Convention: SIAE-ALARM-MIBAlarmStatus Enumeration
Type Values:
1cleared
2activeReportableStatus
3activeReportableWarning
4activeReportableMinor
5activeReportableMajor
6activeReportableCritical
 .1.3.6.1.4.1.3373.1103.80.34.1.5
linkTfcV2RowStatus
Status of this conceptual row in linkTfcV2Table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3373.1103.80.34.1.6

linkProV2Table

table
.1.3.6.1.4.1.3373.1103.80.35 · 1 row entry · 10 columns
Open in standard view 
A list of protection link entries.
linkProV2Entry entry .1.3.6.1.4.1.3373.1103.80.35.1
An entry containing management information applicable to a
protected link.
Indexes
linkIndex linkPolIndex
Column Syntax OID
linkProV2ProtectionTxChIdx
This object identifies the tx protection channel
of a protected link. This object is not applicable
in case of not-revertive protection. For N+1 links
a value different from zero must be set.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.35.1.1
linkProV2ProtectionRxChIdx
This object identifies the rx protection channel
of a protected link. This object is not applicable
in case of not-revertive protection. For N+1 links
a value different from zero must be set.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.35.1.2
linkProV2TxWtrTime
It defines the Wait Time (in minutes) to Restore in transmission
when revertive protection is enabled. Zero value means no switch.
If switch is not supported or protection is not revertive,
a value different from zero…
Integer32r/w
Constraints:
range: 0-12
 .1.3.6.1.4.1.3373.1103.80.35.1.3
linkProV2RxWtrTime
It defines the Wait Time (in minutes) to Restore in reception when
revertive protection is enabled. Zero value means no switch.
If switch is not supported or protection is not revertive,
a value different from zero ca…
Integer32r/w
Constraints:
range: 0-12
 .1.3.6.1.4.1.3373.1103.80.35.1.4
linkProV2TxSwitchedChIdx
This object reports the index of tx channel switched to protection.
This object is applicable only for N+1 protection schema.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.35.1.5
linkProV2RxSwitchedChIdx
This object reports the index of rx channel switched to protection.
This object is applicable only for N+1 protection schema.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.35.1.6
linkProV2TxRevertive
It defines if tx protection is revertive or not revertive.
In case of N+1 protection, protection is always revertive.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.35.1.7
linkProV2RxRevertive
It defines if rx protection is revertive or not revertive.
In case of N+1 protection, protection is always revertive.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.35.1.8
linkProV2ExtraTraffic
This object enables or disables the transfer of extra traffic
on the protection channel in a N+1 link. This object must be
set to disabled in case of architectures different for N+1.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.35.1.9
linkProV2RowStatus
Status of this conceptual row in linkProV2Table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.3373.1103.80.35.1.10

linkProMaintV2Table

table
.1.3.6.1.4.1.3373.1103.80.36 · 1 row entry · 6 columns
Open in standard view 
A list of maintenance commands for protected links.
A row in this table is added on creation of a row
in linkProV2Table.
linkProMaintV2Entry entry .1.3.6.1.4.1.3373.1103.80.36.1
An entry containing maintenance commands applicable to a
protected link.
Indexes
linkIndex linkPolIndex
Column Syntax OID
linkProMaintV2TxLockout
Command to enable/disable tx lockout. This object
is applicable only in case of N+1 protections.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.36.1.1
linkProMaintV2RxLockout
Command to enable/disable rx lockout. This object
is applicable only in case of N+1 protections.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.36.1.2
linkProMaintV2TxForced
Command to force switch to a given
transmission channel. Zero value means no
switch.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.36.1.3
linkProMaintV2RxForced
Command to force switch to a given
receiving channel. Zero value means no
switch.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.36.1.4
linkProMaintV2TxWtrReset
Clear wait time to restore making the revertive
path immediately available.
Enumerationr/w
Enumerated Values:
1notActive
2on
 .1.3.6.1.4.1.3373.1103.80.36.1.5
linkProMaintV2RxWtrReset
Clear wait time to restore making the revertive
path immediately available.
Enumerationr/w
Enumerated Values:
1notActive
2on
 .1.3.6.1.4.1.3373.1103.80.36.1.6

sspTable

table
.1.3.6.1.4.1.3373.1103.80.37 · 1 row entry · 10 columns
Open in standard view 
A list of operative and administrative set of parameters.
This table holds three row for every link (and its polarizations)
configured in the NE:
 1) administative parameters of local NE
 2) operative parameters of local NE
 3) administative parameters of remote NE
sspEntry entry .1.3.6.1.4.1.3373.1103.80.37.1
An entry containing SSP relevant parameters.
Indexes
linkIndex linkPolIndex sspParameterType
Column Syntax OID
sspParameterType
This object identifies what parameters are for.
Enumeration
Enumerated Values:
1localAdminStatus
2localOperStatus
3remoteAdminStatus
 .1.3.6.1.4.1.3373.1103.80.37.1.1
sspLinkBandwidth
Link Bandwidth (channel spacing).
Enumeration
Enumerated Values:
0sspBw3p5Mhz
1sspBw7MHz
2sspBw14MHz
3sspBw28MHz
4sspBw56MHz
5sspBw10MHz
6sspBw20MHz
7sspBw30MHz
8sspBw40MHz
9sspBw50MHz
10sspBw112Mhz
11sspBw250Mhz
12sspBw500Mhz
13sspBw750Mhz
14sspBw1Ghz
15sspBw60MHz
16sspBw80MHz
 .1.3.6.1.4.1.3373.1103.80.37.1.2
sspLinkModulation
Link reference modulation.
Enumeration
Enumerated Values:
1sspModBPSK
2sspMod4QAM
3sspMod8PSK
4sspMod16QAM
5sspMod32QAM
6sspMod64QAM
7sspMod128QAM
8sspMod256QAM
9sspMod512QAM
10sspMod1024QAM
11sspMod2048QAM
12sspMod4096QAM
 .1.3.6.1.4.1.3373.1103.80.37.1.3
sspLinkAcmEngineEnable
This object is used to enable/disable the ACM engine.
Enumeration
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.37.1.4
sspLinkTxUpperProfile
The object (and linkTxLowerProfile object) is used to
restrict the TX profile range when ACM is enabled.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.37.1.5
sspLinkTxLowerProfile
The object (and linkTxUpperProfile object) is used to
restrict the TX profile range when ACM is enabled.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.37.1.6
sspLinkSynchSetupProtocolEnable
Synchronization Setup Protocol (SSP) control.
Enumeration
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.37.1.7
sspLinkProfilesSetSelection
Selection of the working profile set between high gain
(max robustness) profile set and high throughput (max
capacity) profile set. The set of profiles high gain
features a greater robustness against to the set of
profi…
Enumeration
Enumerated Values:
1highThroughput
2highGain
 .1.3.6.1.4.1.3373.1103.80.37.1.8
sspTdmE1Channel
Number of E1 channels. This object is used to define the capacity
of E1 tributaries assigned to a given radio link. The capacity is
changed in steps of E1 (2Mbit/s).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.37.1.9
sspTdmStm1Channel
Number of STM-1 channels transported in bulk mode.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.37.1.10

radioLoopCapabilityTable

table
.1.3.6.1.4.1.3373.1103.80.38 · 1 row entry · 3 columns
Open in standard view 
This table shows which group a radio loop belongs to.
Radios with the same group number (identifier) close loop
simultaneously.
radioLoopCapabilityEntry entry .1.3.6.1.4.1.3373.1103.80.38.1
An entry containing a group identifier for each radio loop type.
Indexes
radioIndex
Column Syntax OID
radioLoopRfGroup
The group to which the radio RF loop belong to.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.38.1.1
radioLoopIqGroup
The group to which the radio IQ loop belong to.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.38.1.2
radioLoopBaseBandGroup
The group to which the radio base loop belong to.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.38.1.3

radioRxBerThresholdTable

table
.1.3.6.1.4.1.3373.1103.80.39 · 1 row entry · 3 columns
Open in standard view 
This table shows the nominal and measured values of RX power 
at a bit error rate (BER) equal to 10e-6.
radioRxBerThresholdEntry entry .1.3.6.1.4.1.3373.1103.80.39.1
An entry containing the RX power thresholds.
Indexes
radioIndex
Column Syntax OID
radioRxBerThresholdStatus
This object shows whether the following objects are significant.
Enumeration
Enumerated Values:
1nonValid
2valid
 .1.3.6.1.4.1.3373.1103.80.39.1.1
radioNominalRxBerThreshold
The nominal value of RX power @ BER equal to 10e-6
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.39.1.2
radioMeasuredRxBerThreshold
The measured value of RX power @ BER equal to 10e-6.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.39.1.3

radioEchoCancelerTable

table
.1.3.6.1.4.1.3373.1103.80.40 · 1 row entry · 7 columns
Open in standard view 
Table with radio settings entries for Echo Canceler procedure.
radioEchoCancelerEntry entry .1.3.6.1.4.1.3373.1103.80.40.1
Radio echo canceler.
Indexes
radioIndex
Column Syntax OID
radioEchoCancelerFunctionEn
This object is used to enable or disable echo canceler calibration function..
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.3373.1103.80.40.1.1
radioEchoCancelerCableLenMin
Minimum cable len (Meter range 0 to 300) -.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.40.1.2
radioEchoCancelerCableLenMax
Maximum cable len (Meter range 0 to 300) -.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.40.1.3
radioEchoCancelerDelayLine1
Echo canceler line 1 delay (retrieved by calibration function) -.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.40.1.4
radioEchoCancelerDelayLine2
Echo canceler line 2 delay (retrieved by calibration function) -.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.3373.1103.80.40.1.5
radioEchoCancStatus
Current echo canceler calibration status.
Enumeration
Enumerated Values:
0disabled
1uncalibrated
2calibrating
3calibrated
4fail
5unavailable
 .1.3.6.1.4.1.3373.1103.80.40.1.6
radioEchoCancStart
Echo canceler calibration function trigger.
Enumerationr/w
Enumerated Values:
0stop
1start
 .1.3.6.1.4.1.3373.1103.80.40.1.7