radioConfigAlarmReason

SIAE-RADIO-SYSTEM-MIB · .1.3.6.1.4.1.3373.1103.80.12.1.25
MIB view Table view

Object

column ConfigMismatchReason 
Bit map to describe the Config Mismatch Alarm

Context

MIB
SIAE-RADIO-SYSTEM-MIB
OID
.1.3.6.1.4.1.3373.1103.80.12.1.25
Type
column
Access
readonly
Status
current
Parent
radioStatusEntry
Table
radioStatusTable
Siblings
28

Syntax

ConfigMismatchReason
Source
ConfigMismatchReason
Base type
Bits

Values & Constraints

Type Values
0securityMismatch
1frequencyFailMismatch
2frequencyAlertMismatch
3ptxMismatch
4channelSpacingAndModulationMismatch
5remoteConfigurationMismatch
6acmMismatch
7profileSetMismatch

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
radioCurrentDuplexFrequency
Spacing between transmitted and received frequency in KHz.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.1103.80.12.1.1
radioInvalidFrequencyAlarm
Invalid frequency alarm with associated severity.
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.10
radioBaseBandRxAlarm
Base Band Rx alarm status with associated severity.
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.11
radioModulatorFailAlarm
Modulator Fail Alarm status with associated severity.
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.12
radioDemodulatorFailAlarm
Demodulator Fail Alarm status with associated severity.
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.13
radioRxPowerLowAlarm
Receiver power low alarm status with associated severity.
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.14
radioTxPowerLowAlarm
Transmitter power low alarm status with associated severity.
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.15
radioRemDemodulatorFailAlarm
Remote Demodulator Fail Alarm status with associated severity.
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.16
radioVcoFailAlarm
RT VCO fail alarm status with associated severity.
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.17
radioRxIFAgcAlarm
RT Rx IF AGC fail alarm status with associated severity.
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.18
radioTxIFAgcAlarm
RT Tx IF AGC fail alarm status with associated severity.
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.19
radioTxChannelSpacing
Half of transmitted signal channel spacing in KHz.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.1103.80.12.1.2
radioIduOduCommunicationAlarm
Communication from IDU towards ODU is down
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.20
radioOduIduCommunicationAlarm
Communication from ODU towards IDU is down
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.21
radioLocalOduAlarmSynthesis
Local ODU alarm synthesis with associated severity.
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.22
radioRemoteOduAlarmSynthesis
Local ODU alarm synthesis alarm status with associated severity.
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.23
radioConfigMismatchAlarm
Config Mismatch alarm status with associated severity and related map.
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.24
radioRxQualityLowAlarm
High BER Alarm status with associated severity.
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.26
radioRxQualityWarningAlarm
The RX signal is close to cause errors on payload.
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.27
radioXpd
Cross-Polarization Discrimination, in tenths of dB, is the difference between the received signal power of the co-polarized main beam, and it componemt received on the cross-polar…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.1103.80.12.1.28
radioXpicAlarm
This alarm raises when the xpic configuration isn't working on the specified radioIndex. This could be due to an external issue in case of cable connection or to an internal issue…
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.29
radioPrx
Received power level (dBm).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.1103.80.12.1.3
radioPtx
Transmitted power level (dBm).
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.1103.80.12.1.4
radioNormalizedMse
Normalized MSE (Mean Squared Error) is an indicator of the Signal to Noise (S/N) ratio. It's in 0.1 dB steps
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.3373.1103.80.12.1.5
radioRxActiveStatus
Receiver Active status with associated Severity In 1+1 Hot Standby radio system, only one RX is active. RXs are active in other configurations of the radio system.
columnEnumeration.1.3.6.1.4.1.3373.1103.80.12.1.6
radioTxActiveStatus
Transmitter Active status with associated Severity. In 1+1 Hot Standby radio system, only one TX is active. TXs are active in other configurations of the radio system.
columnEnumeration.1.3.6.1.4.1.3373.1103.80.12.1.7
radioCableOpenAlarm
Cable connnecting ODU is open: alarm status with associated severity.
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.8
radioCableShortAlarm
Cable connnecting ODU is in short-circuit: alarm status with associated severity.
columnSIAE-ALARM-MIBAlarmStatus.1.3.6.1.4.1.3373.1103.80.12.1.9