radioFreqTableSelection
SIAE-RADIO-SYSTEM-MIB ·
.1.3.6.1.4.1.3373.1103.80.9.1.11
Object
column
r/w
ChannelSpacing
RadioFrequencyTable key (channel spacing & modulation) selection.
Context
- MIB
- SIAE-RADIO-SYSTEM-MIB
- OID
.1.3.6.1.4.1.3373.1103.80.9.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- radioSettingsEntry
- Table
- radioSettingsTable
- Siblings
- 10
Syntax
ChannelSpacing
- Source
- ChannelSpacing
- Base type
Enumeration
Values & Constraints
Type Values
0 | bw3M5Hz |
1 | bw7Mhz |
2 | bw14MHz |
3 | bw28MHz |
4 | bw56MHz |
5 | bw40MHz |
6 | bw112MHz |
7 | bw250Mhz |
8 | bw500Mhz |
9 | bw750Mhz |
10 | bw1000Mhz |
11 | bw10Mhz |
12 | bw20Mhz |
13 | bw30Mhz |
14 | bw50Mhz |
15 | bw60Mhz |
16 | bw80Mhz |
17 | bw2000Mhz |
18 | bw62M5hz |
19 | bw125Mhz |
20 | bw1500Mhz |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| radioSettingsIndex Radio settings index. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.9.1.1 |
| radioAtpcRange Defines the range of the ATPC regulation (expressed in dB) with respect
to the current value of maximum Tx output, that is intended as the upper
limit of the range. A null value m… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.9.1.10 |
| radioSettingsRowStatus Status of this row. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.3373.1103.80.9.1.2 |
| radioSettingsLabel A textual string containing information about the radio
interface. | column | OctetString | .1.3.6.1.4.1.3373.1103.80.9.1.3 |
| radioTxFrequency Transmitted frequency in KHz. Null value means invalid frequency. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.9.1.4 |
| radioDuplexFrequency Value of duplex frequency in KHz. -2 means not set. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.9.1.5 |
| radioTxAttenuation Transmitter attenuation relative to nominal power (dBm). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.9.1.6 |
| radioAtpcManual Enables/disables Atpc Manual operation.
When the feature is enabled there are 2 behaviour:
- (enable) after an air los the ODU transmits the maximum available power
- (enable-min-… | column | Enumeration | .1.3.6.1.4.1.3373.1103.80.9.1.7 |
| radioAtpcPwrHigh ATPC Control - Local Rx Power High (dBm range -30 to -80) -. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.9.1.8 |
| radioAtpcPwrLow ATPC Control - Local Rx Power Low (dBm range -30 to -80) -. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.9.1.9 |