radioConfigMismatchAlarm
SIAE-RADIO-SYSTEM-MIB ·
.1.3.6.1.4.1.3373.1103.80.12.1.24
Object
column
SIAE-ALARM-MIBAlarmStatus
Config Mismatch alarm status with associated severity and related map.
Context
- MIB
- SIAE-RADIO-SYSTEM-MIB
- OID
.1.3.6.1.4.1.3373.1103.80.12.1.24- Type
- column
- Access
- readonly
- Status
- current
- Parent
- radioStatusEntry
- Table
- radioStatusTable
- Siblings
- 28
Syntax
SIAE-ALARM-MIBAlarmStatus
- Source
- SIAE-ALARM-MIBAlarmStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | cleared |
2 | activeReportableStatus |
3 | activeReportableWarning |
4 | activeReportableMinor |
5 | activeReportableMajor |
6 | activeReportableCritical |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| radioCurrentDuplexFrequency Spacing between transmitted and received frequency in KHz. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.12.1.1 |
| radioInvalidFrequencyAlarm Invalid frequency alarm with associated severity. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.10 |
| radioBaseBandRxAlarm Base Band Rx alarm status with associated severity. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.11 |
| radioModulatorFailAlarm Modulator Fail Alarm status with associated severity. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.12 |
| radioDemodulatorFailAlarm Demodulator Fail Alarm status with associated severity. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.13 |
| radioRxPowerLowAlarm Receiver power low alarm status with associated severity. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.14 |
| radioTxPowerLowAlarm Transmitter power low alarm status with associated severity. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.15 |
| radioRemDemodulatorFailAlarm Remote Demodulator Fail Alarm status with associated severity. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.16 |
| radioVcoFailAlarm RT VCO fail alarm status with associated severity. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.17 |
| radioRxIFAgcAlarm RT Rx IF AGC fail alarm status with associated severity. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.18 |
| radioTxIFAgcAlarm RT Tx IF AGC fail alarm status with associated severity. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.19 |
| radioTxChannelSpacing Half of transmitted signal channel spacing in KHz. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.12.1.2 |
| radioIduOduCommunicationAlarm Communication from IDU towards ODU is down | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.20 |
| radioOduIduCommunicationAlarm Communication from ODU towards IDU is down | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.21 |
| radioLocalOduAlarmSynthesis Local ODU alarm synthesis with associated severity. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.22 |
| radioRemoteOduAlarmSynthesis Local ODU alarm synthesis alarm status with associated severity. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.23 |
| radioConfigAlarmReason Bit map to describe the Config Mismatch Alarm | column | ConfigMismatchReason | .1.3.6.1.4.1.3373.1103.80.12.1.25 |
| radioRxQualityLowAlarm High BER Alarm status with associated severity. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.26 |
| radioRxQualityWarningAlarm The RX signal is close to cause errors on payload. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.27 |
| radioXpd Cross-Polarization Discrimination, in tenths of dB, is the
difference between the received signal power of the
co-polarized main beam, and it componemt received on the
cross-polar… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.12.1.28 |
| radioXpicAlarm This alarm raises when the xpic configuration isn't working
on the specified radioIndex. This could be due to an external
issue in case of cable connection or to an internal issue… | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.29 |
| radioPrx Received power level (dBm). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.12.1.3 |
| radioPtx Transmitted power level (dBm). | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.12.1.4 |
| radioNormalizedMse Normalized MSE (Mean Squared Error) is an indicator of the Signal
to Noise (S/N) ratio. It's in 0.1 dB steps | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.12.1.5 |
| radioRxActiveStatus Receiver Active status with associated Severity
In 1+1 Hot Standby radio system, only one RX is active.
RXs are active in other configurations of the radio system. | column | Enumeration | .1.3.6.1.4.1.3373.1103.80.12.1.6 |
| radioTxActiveStatus Transmitter Active status with associated Severity.
In 1+1 Hot Standby radio system, only one TX is active.
TXs are active in other configurations of the radio system. | column | Enumeration | .1.3.6.1.4.1.3373.1103.80.12.1.7 |
| radioCableOpenAlarm Cable connnecting ODU is open: alarm status with associated
severity. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.8 |
| radioCableShortAlarm Cable connnecting ODU is in short-circuit: alarm status
with associated severity. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.12.1.9 |