linkReducedCapacityAlarm
SIAE-RADIO-SYSTEM-MIB ·
.1.3.6.1.4.1.3373.1103.80.17.1.15
Object
column
SIAE-ALARM-MIBAlarmStatus
The equipment works in reduced capacity
Context
- MIB
- SIAE-RADIO-SYSTEM-MIB
- OID
.1.3.6.1.4.1.3373.1103.80.17.1.15- Type
- column
- Access
- readonly
- Status
- current
- Parent
- linkStatusEntry
- Table
- linkStatusTable
- Siblings
- 25
Syntax
SIAE-ALARM-MIBAlarmStatus
- Source
- SIAE-ALARM-MIBAlarmStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | cleared |
2 | activeReportableStatus |
3 | activeReportableWarning |
4 | activeReportableMinor |
5 | activeReportableMajor |
6 | activeReportableCritical |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| linkPolIndex This object identifies the radio polarization. In XPIC radio link
identifies one of the polarizations. | column | Integer32 | .1.3.6.1.4.1.3373.1103.80.17.1.1 |
| linkTxETHCapacity This object reports (in Kbits/sec) the transmitted payload
capacity used by the Ethernet | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.17.1.10 |
| linkRxETHCapacity This object reports (in Kbits/sec) the received payload capacity
used by the Ethernet | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.17.1.11 |
| linkTxTDMCapacity This object reports the capacity in kbit/sec reserved to TDM
tributaries in tx ACM profile. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.17.1.12 |
| linkRxTDMCapacity This object reports the capacity in kbit/sec reserved to TDM
tributaries in rx ACM profile. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.17.1.13 |
| linkRescueModulation This object is the modulation used when the remote terminal is
unreachable, ie traffic on radio link is down. | column | BitsPerSymbol | .1.3.6.1.4.1.3373.1103.80.17.1.14 |
| linkLinkTelemetryFailAlarm Fail of link telemetry communication channel with associated
Severity | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.17.1.16 |
| linkIdMismatchAlarm Link Identification Alarm with associated Severity | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.17.1.17 |
| linkRadioEocAlarm Fail of Radio Eoc link communication channel with associated
Severity | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.17.1.18 |
| linkSetupMismatchAlarm The local setup doesn't match the setup of remote terminal | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.17.1.19 |
| linkAcmRxProfile This object reports the ACM profile number in use in the radio Rx.
It is the linkAcmProfileId of linkAcmTable.
Label is linkAcmProfileLabel from linkAcmTable | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.17.1.2 |
| linkRescueSetupAlarm The equipment is using the setup relative to the rescue modulation | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.17.1.20 |
| linkXpicProcedureBlockAlarm Only for XPIC equipment configurations.
Equipment Controller XPIC procedure Alarm control with associated
Severity | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.17.1.21 |
| linkXpicRemTxOffAlarm Only for XPIC equipment configurations.
Remote TX OFF command with associated Severity | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.17.1.22 |
| linkRemoteIduAlarmSynthesis Synthesis of the remote IDU alarms | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.17.1.23 |
| linkNotMatchingRadiosAlarm Radios of the link does not have matched parameters. | column | SIAE-ALARM-MIBAlarmStatus | .1.3.6.1.4.1.3373.1103.80.17.1.24 |
| linkConfigurationInProgress The link is being configured and the table linkSettingsTable is
not available for modifying parameters. | column | Enumeration | .1.3.6.1.4.1.3373.1103.80.17.1.25 |
| linkXpd deprecated Cross-Polarization Discrimination, in tenths of dB, is the
difference between the received signal power of the
co-polarized main beam, and it componemt received on the
cross-polar… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.17.1.26 |
| linkAcmTxProfile This object reports the ACM profile number in use in the radio Tx.
It is the linkAcmProfileId of linkAcmTable.
Label is linkAcmProfileLabel from linkAcmTable | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.3373.1103.80.17.1.3 |
| linkAcmRxProfileLabel ASCII string used to describe current acm rx profile | column | OctetString | .1.3.6.1.4.1.3373.1103.80.17.1.4 |
| linkAcmTxProfileLabel ASCII string used to describe current acm tx profile | column | OctetString | .1.3.6.1.4.1.3373.1103.80.17.1.5 |
| linkAcmRxModulation This object is the type of modulation of the Rx profile in use. | column | BitsPerSymbol | .1.3.6.1.4.1.3373.1103.80.17.1.6 |
| linkAcmTxModulation This object is the type of modulation of the Tx profile in use. | column | BitsPerSymbol | .1.3.6.1.4.1.3373.1103.80.17.1.7 |
| linkAcmRxCode This object is the type of codificator of the Rx profile in use. | column | Enumeration | .1.3.6.1.4.1.3373.1103.80.17.1.8 |
| linkAcmTxCode This object is the type of codificator of the Tx profile in use. | column | Enumeration | .1.3.6.1.4.1.3373.1103.80.17.1.9 |