linkBandwidthAndModulation

SIAE-RADIO-SYSTEM-MIB · .1.3.6.1.4.1.3373.1103.80.8.1.1

Object

column r/w SNMPv2-SMIInteger32

Link Modulation and Bandwidth (channel spacing).
The value of this object value is computed by:
   65536*modulation+bandwidth
 where bandwidth selection is:
   0 = 3.5MHz
   1 = 7MHz
   2 = 14MHz
   3 = 28MHz
   4 = 56MHz
   5 = 10MHz
   6 = 20MHz
   7 = 30MHz
   8 = 40MHz
   9 = 50MHz
  10 = 112MHz
  11 = 250MHz
  12 = 500MHz
  13 = 750MHz
  14 = 1GHz
  15 = 60MHz
  16 = 80MHz
  17 = 2GHz
  18 = 62.5MHz
  19 = 125MHz
  20 = 1.5GHz
 and modulation is in bit-per-symbol:
   1 = BPSK
   2 = 4QAM
   3 = 8PSK
   4 = 16QAM
   5 = 32QAM
   6 = 64QAM
   7 = 128QAM
   8 = 256QAM
   9 = 512QAM
  10 = 1024QAM
  11 = 2048QAM.
  12 = 4096QAM.
              
 Examples:
 250Mhz-4QAM  (131083),
 500Mhz-4QAM  (131084),
 250Mhz-16QAM (262155),
 500Mhz-64QAM (393228).
              
 Note: 0 bit-per-symbol is not possible,
 so value 0 is used for
 BandwidthAndModulation unassigned.

Context

MIB: SIAE-RADIO-SYSTEM-MIB
OID: .1.3.6.1.4.1.3373.1103.80.8.1.1
Type: column
Access: readwrite
Status: current
Parent: linkSettingsEntry
Table: linkSettingsTable
Siblings: 9

Syntax

SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
linkXpicControlProcedure Set by manager to enable\disable XPIC alarm control procedure. Only for XPIC configurations.	column	Enumeration	`.1.3.6.1.4.1.3373.1103.80.8.1.10`
linkAcmEngineEnable This object is used to enable/disable the ACM engine	column	Enumeration	`.1.3.6.1.4.1.3373.1103.80.8.1.2`
linkTxUpperProfile The object (and linkTxLowerProfile object) is used to restrict the TX profile range when ACM is enabled.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3373.1103.80.8.1.3`
linkTxLowerProfile The object (and linkTxUpperProfile object) is used to restrict the TX profile range when ACM is enabled.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.3373.1103.80.8.1.4`
linkId Link Identification (value 0..255)	column	Integer32	`.1.3.6.1.4.1.3373.1103.80.8.1.5`
linkTxPwrThresh Threshold (value +3 , +15 dB) relative to nominal value of the TX power below wich the related alarm is set.	column	Integer32	`.1.3.6.1.4.1.3373.1103.80.8.1.6`
linkRxPwrThresh Threshold (value -40 , -99 dBm) for RX power below wich the related alarm is set.	column	Integer32	`.1.3.6.1.4.1.3373.1103.80.8.1.7`
linkSynchSetupProtocolEnable Synchronization Setup Protocol (SSP) control	column	Enumeration	`.1.3.6.1.4.1.3373.1103.80.8.1.8`
linkProfilesSetSelection Selection of the working profile set between high gain (max robustness) profile set and high throughput (max capacity) profile set. The set of profiles high gain features a greate…	column	Enumeration	`.1.3.6.1.4.1.3373.1103.80.8.1.9`