RAD-Dacs-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
40
Rows
40
Columns
357

sysDclTable

table
.1.3.6.1.4.1.164.3.3.1.2.2.1 · 1 row entry · 10 columns
Open in standard view 
All the entries of this table are identical (have the 
same value) for all the configurations (1..255) except 
the TmpCnfg.
The write operation into the Table Objects is valid only
for the TmpCnfg entry.
sysDclEntry entry .1.3.6.1.4.1.164.3.3.1.2.2.1.1
An entry in table.
Indexes
sysDclCnfgIdx
Column Syntax OID
sysDclCnfgIdx
This object indicates the Idx of the Cnfg(1..255)
being accessed ; Idx of 255 relates to the TmpCnfg.
This object is identical for all the configurations (1..255).
Only the TmpCnf(255) might have a different value.
Fo…
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.3.1.2.2.1.1.1
sysDclRedundancy
DCL redundancy desired state.
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.1.2.2.1.1.2
sysDclActiveCl
Active desired DCL.
When 'auto' is selected, the system automatically selects
the active DCL.
Enumerationr/w
Enumerated Values:
1auto
2dclA
3dclB
 .1.3.6.1.4.1.164.3.3.1.2.2.1.1.3
sysDclFlipDelay
If one DCL flip occurred and a second one should be
performed, the time from the previous flip is checked.
If the time is shorter than the delay specified here,
the system should delay the flip operation until time reac…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.2.2.1.1.4
sysDclFlipUponStnClk
This object allows user to decide (yes/no) if Agent should Flip from
one DCL card to another, when there is Station Clock Fail in
the Online DCL card.
Enumerationr/w
Enumerated Values:
1notApplicable
2no
3yes
 .1.3.6.1.4.1.164.3.3.1.2.2.1.1.5
sysDclChFailThreshold
This object indicates the number of failed channels that will trigger the
redundancy procedure.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.2.2.1.1.6
sysDclChPriority
This object indicates the Priority for all the channels in the Main Access
(Common Logic) card. Each channel is represented by 1 bit.
The order of the bits in each byte is from Right to Left (LSB Bit to MSB)
starting …
OctetStringr/w .1.3.6.1.4.1.164.3.3.1.2.2.1.1.7
sysDclConfigDownloadSrc
In case of mismatch between the 2 CL card's configuration, the user can decide
which card has the suitable configuration.
The selected configuration will be downloaded from card A to card B
if the value is dclA(2) or f…
Enumerationr/w
Enumerated Values:
1off
2dclA
3dclB
 .1.3.6.1.4.1.164.3.3.1.2.2.1.1.8
sysDclSwDownloadSrc
In case of mismatch between the 2 CL card's software, the user can decide
which card has the suitable SW.
The selected SW will be downloaded from card A to card B if the value is dclA(2)
or from card B to card A if the…
Enumerationr/w
Enumerated Values:
1off
2dclA
3dclB
 .1.3.6.1.4.1.164.3.3.1.2.2.1.1.9
sysDclRedundancyStatus
Bit map representing current Redundancy Status.
bit 0 - Indicates mismatch between the 2 CL cards' Configuration
bit 1 - Indicates mismatch between the 2 CL cards' Software.
bit 2 - Indicates CL card A Absence.
bi…
Bits
Enumerated Values:
0cnfgMismatch
1swMismatch
2cardAAbsent
3cardBAbsent
4lossOfCommunication
5hwMismatch
6cnfgUpdate
7swUpdate
 .1.3.6.1.4.1.164.3.3.1.2.2.1.1.10

sysDclCopyDbTable

table
.1.3.6.1.4.1.164.3.3.1.2.2.3 · 1 row entry · 2 columns
Open in standard view 
This table enables to copy a cofiguration from the Offline
Dcl to the Online Dcl.
sysDclCopyDbEntry entry .1.3.6.1.4.1.164.3.3.1.2.2.3.1
An entry in table.
Indexes
sysDclCopyDbIdx
Column Syntax OID
sysDclCopyDbIdx
This object indicates the Idx of the Cnfg(1..255)
being accessed.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.3.1.2.2.3.1.1
sysDclCopyDbCmd
When this command is sent to the agent, on(3), the Database
specified (Db Idx), will be copied from the Offline Dcl
to the Online Dcl. Afterwards the value of this object will
automatically change to off(2).
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.1.2.2.3.1.2

sysSErrListTable

table
.1.3.6.1.4.1.164.3.3.1.3.13 · 1 row entry · 3 columns
Open in standard view 
A table.
sysSErrListEntry entry .1.3.6.1.4.1.164.3.3.1.3.13.1
An entry in table.
Indexes
sysSErrType sysSErrIdx
Column Syntax OID
sysSErrType
The errors are recorded in the agent, in two separate lists,
according to their type: error or warning.
Enumeration
Enumerated Values:
1error
2warning
 .1.3.6.1.4.1.164.3.3.1.3.13.1.1
sysSErrIdx
Unique index number to identify an entry in the error
or warning list .
The maximum value cannot exceed the value of
'sysSNoOfSanityCheckErr' (actually, the sum of the Errors
list max. index and the Warning list max. …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.3.13.1.2
sysSErrDescription
This object is a full text description of the sanity check
error including error code, IO slot and port numbers related to
the code .
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.1.3.13.1.3

sysSRdnFlipTable

table
.1.3.6.1.4.1.164.3.3.1.3.18 · 1 row entry · 6 columns
Open in standard view 
This table includes all the Flip events due to I/O Redundancy since
last Clear command of this table.
sysSRdnFlipEntry entry .1.3.6.1.4.1.164.3.3.1.3.18.1
An entry in table.
Indexes
sysSRdnFlipIdx
Column Syntax OID
sysSRdnFlipIdx
Unique index number to identify an entry in the Redundancy Flip list.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.3.18.1.1
sysSRdnFlipSlot
The slot number from which Flip was performed.
Enumeration
Enumerated Values:
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
255notApplicable
 .1.3.6.1.4.1.164.3.3.1.3.18.1.2
sysSRdnFlipPort
The port number from which Flip was performed.
For DXC:
For external ports the convention used will be:
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.3.18.1.3
sysSRdnFlipCause
The last cause that caused the Flip from the Slot (Port)
of sysSRdnSlot, sysSRdnPort.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.3.3.1.3.18.1.4
sysSRdnFlipDate
Flip event Date. The format will be the one selected by user for
sysSDateFormat.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.3.3.1.3.18.1.5
sysSRdnFlipTime
Flip event Time. The format will be hh:mm:ss.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.3.3.1.3.18.1.6

sysSBusTable

table
.1.3.6.1.4.1.164.3.3.1.3.21 · 1 row entry · 4 columns
Open in standard view 
This table includes data and status about the internal DXC BUS.
sysSBusEntry entry .1.3.6.1.4.1.164.3.3.1.3.21.1
An entry in table.
Indexes
sysSBusPortIdx
Column Syntax OID
sysSBusPortIdx
The DXC BUS port number:
- first two digits will be: (IO slot number+10)
- last one/two digits will be the Bus port number, in odd numbers:
port1 = 1
port2 = 3
Example: port2 of IO slot 11 will be: 213.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.3.21.1.1
sysSBusStatus
The Status of sysSBusPortIdx.
free - not used
physical - captured by the port of the card physically installed
virtual - captured virtually by another port. Example: DIM port
(by Destination) or by Transp…
Enumeration
Enumerated Values:
1free
2physical
3virtual
 .1.3.6.1.4.1.164.3.3.1.3.21.1.2
sysSBusCapturePort
The Port that Captured the sysSBusPortIdx.
- if sysSBusStatus=free, the value will be 'none'=0
- else, if sysSBusStatus=fixed, the value will be: sysSBusPortIdx
- else, the value will be according to the port index …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.3.21.1.3
sysSBusUtilization
Utilization of sysSBusPortIdx resources, in percent [%].
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.3.21.1.4

sysSRdnCmdTable

table
.1.3.6.1.4.1.164.3.3.1.3.22 · 1 row entry · 3 columns
Open in standard view 
This table includes commands used for IO Redundancy.
sysSRdnCmdEntry entry .1.3.6.1.4.1.164.3.3.1.3.22.1
An entry in table.
Indexes
sysCRdnPrimeSlot sysCRdnPrimePort
Column Syntax OID
sysSRdnEnforcedChannel
This is a command to override all switching considerations
and enforce use of primary/ secondary connection only.
noEnforcement - cancels the state of override and goes back to
usual switching cons…
Enumerationr/w
Enumerated Values:
1notApplicable
2noEnforcement
3primary
4secondary
 .1.3.6.1.4.1.164.3.3.1.3.22.1.1
sysSRdnLockFlip
This is a command to lock the Redundancy flip for this redundancy couple.
Default = off(2).
Enumerationr/w
Enumerated Values:
1notApplicable
2off
3on
 .1.3.6.1.4.1.164.3.3.1.3.22.1.2
sysSRdnManualFlip
This is a command to move to manual Redundancy flip mode for this redundancy couple.
Default = off(2).
Enumerationr/w
Enumerated Values:
1notApplicable
2off
3on
 .1.3.6.1.4.1.164.3.3.1.3.22.1.3

sysSAlrTable

table
.1.3.6.1.4.1.164.3.3.1.4.1 · 1 row entry · 7 columns
Open in standard view 
List of system level current existing alarms .
sysSAlrEntry entry .1.3.6.1.4.1.164.3.3.1.4.1.1
An entry in table.
Indexes
sysSAlrIdx
Column Syntax OID
sysSAlrIdx
An index number of the current system alarms.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.4.1.1.1
sysSAlrCode
This object indicates a code related to a specific
alarm description. The list of codes and their related
descriptions will be sent to NMS request (for display purpose)
by alrGenTable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.4.1.1.2
sysSAlrState
This object indicates the alarm Severity.
Enumeration
Enumerated Values:
3event
4minor
5major
6warning
7critical
 .1.3.6.1.4.1.164.3.3.1.4.1.1.3
sysSAlarmMask
Alarm Mask is : on/off.
Enumeration
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.1.4.1.1.4
sysSAlarmInvert
Alarm Invert is : on/off.
Enumeration
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.1.4.1.1.5
sysSAlarmOnOff
Alarm state is : on/off.
Enumeration
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.1.4.1.1.6
sysSAlarmCounter
A counter - how many times the alarm occured (ON) since last
clear operation or since last Reset.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.4.1.1.7

sysBufferAlrTable

table
.1.3.6.1.4.1.164.3.3.1.5.1 · 1 row entry · 9 columns
Open in standard view 
List of current existing alarms (of all levels).
sysBufferAlrEntry entry .1.3.6.1.4.1.164.3.3.1.5.1.1
An entry in table.
Indexes
sysBufferAlrIdx
Column Syntax OID
sysBufferAlrIdx
An index number of the current alarms.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.5.1.1.1
sysBufferAlrCode
This object indicates a code related to a specific
alarm description. The list of codes and thir related
descriptions will be known by the NMS (for display purpose)
and will appear in the unit's user manual.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.5.1.1.2
sysBufferAlrState
This object indicates the alarm type.
minor/major/warning/critical - indicates appearance of the problem
and the type.
event - indicates occurence of an event.
off - indicates disappearance …
Enumeration
Enumerated Values:
2off
3event
4minor
5major
6warning
7critical
 .1.3.6.1.4.1.164.3.3.1.5.1.1.3
sysBufferAlrSlot
The slot number this alarm refers to.
When the alarm refers to a system function OR the DACS agent
is a stand-alone unit, the value will be 'notApplicable(255)'.
local/remote - for OP-4 device.
Enumeration
Enumerated Values:
1psA
2psB
3clA
4clB
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
20local
21psC
101kmxPsA
102kmxPsB
103kmxMlA
104kmxMlB
105kmxCl
106kmxOpt
107kmxIO1
108kmxIO2
109kmxIO3
110kmxIO4
111kmxIO5
112kmxIO6
113kmxIO7
114kmxIO8
115kmxIO9
116kmxIO10
117kmxIO11
118kmxIO12
120remote
255notApplicable
 .1.3.6.1.4.1.164.3.3.1.5.1.1.4
sysBufferAlrPort
The port number this alarm refers to.
If the port number is irrelevant to this alarm (if it is
a system/card level alarm) the value will be 9999.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.5.1.1.5
sysBufferAlrDate
The date when the alarm occured. The format will be according
to sysSDateFormat.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.1.5.1.1.6
sysBufferAlrTime
The time when the alarm occured.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.1.5.1.1.7
sysBufferAlrUpTime
The time when the alarm occured.
This parameter holds the sysUpTime value when the alarm occured.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.3.1.5.1.1.8
sysBufferAlrInfo
This parameter includes information about the alarm (additional to the Description).
SNMP-FRAMEWORK-MIBSnmpAdminString
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.3.3.1.5.1.1.9

sysCClkSrcTable

table
.1.3.6.1.4.1.164.3.3.1.6.1 · 1 row entry · 12 columns
Open in standard view 
All the entries of this table are identical (have the 
same value) for all the configurations (1..255) except 
the TmpCnfg.
For devices with more than one configuration:
The write operation into the Table Objects is valid only
for the TmpCnfg entry.
sysCClkSrcEntry entry .1.3.6.1.4.1.164.3.3.1.6.1.1
An entry in table.
Indexes
sysCClkCnfgIdx sysCClkSrcIdx
Column Syntax OID
sysCClkCnfgIdx
This attribute indicates the Idx of the Cnfg being
accessed ; Idx of 255 relates to the TmpCnfg.
It can be also a combination of the configuration number and the
Card/Port/Other System index.
Integer32
Constraints:
range: 1-2147483647
 .1.3.6.1.4.1.164.3.3.1.6.1.1.1
sysCClkSrcIdx
An index in the table. There are only two entries in the
table.
master - refers Master clock parameters
fallback - refers Fallback clock parameters
Enumeration
Enumerated Values:
1master
2fallback
 .1.3.6.1.4.1.164.3.3.1.6.1.1.2
sysCClkSrcMode
This entry indicates the source the nodal timing is
locked to.
none - is an invalid option for Master clock.
internal - is an invalid option for Fallback clock .
station - is an invalid option for a stand-alone un…
Enumerationr/w
Enumerated Values:
1none
2internal
3rxClk
4station
5lbt
6ntr
7adaptive
8stationB
9automatic
10system
11sSubSystem
12recovered
255notApplicable
 .1.3.6.1.4.1.164.3.3.1.6.1.1.3
sysCClkSrcPrt
This entry is valid only when working in rxClk mode
(for IPmux1000 this entry will be valid whe working in LBT mode).

For ACE2002 in case of invalid entry the return value
will be 0.
For other products …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.6.1.1.4
sysCClkStationFreq
This entry indicates the frequency of the station clock
when the source is 'station'.
The value will be applicable only when the sysCClkSrcMode is
'station'.
Enumerationr/w
Enumerated Values:
1notApplicable
2f1544Khz
3f2048Khz
 .1.3.6.1.4.1.164.3.3.1.6.1.1.5
sysCClkRevertiveTimeout
The time in seconds in which the system will monitor the higher
level clock source, before decision to revert to that clock.
In case the time is zero, revertive mode will be disabled.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.6.1.1.6
sysCClkStationIf
This entry indicates the electrical interface connected to the
station clock, when the source is 'station'.
The value will be applicable only when the sysCClkSrcMode is
'station'.
Enumerationr/w
Enumerated Values:
1notApplicable
2g703
3rs422
4g703E1Unbalanced
5g703T1
6rs422T1
 .1.3.6.1.4.1.164.3.3.1.6.1.1.7
sysCClkStationCableMode
This parameter indicates whether both Station clocks get their
clock from the same source (Y Cable)or each one get its clock independently.
The value will be applicable only when the sysCClkSrcMode is 'station'.
Enumerationr/w
Enumerated Values:
1notApplicable
2normal
3yCable
 .1.3.6.1.4.1.164.3.3.1.6.1.1.8
sysCClkStationOutState
This parameter indicates whether station clock can
send its clock to another device.
The value will be applicable only when the sysCClkSrcMode is 'station'.
Enumerationr/w
Enumerated Values:
1notApplicable
2disabled
3enabled
 .1.3.6.1.4.1.164.3.3.1.6.1.1.9
sysCClkSsmBased
This parameter indicates whether clock source
will be selected based on receive clock quality,
indicated in S1 byte inside SONET/SDH overhead,
(encoded as SSM - Synchronization Status Messaging).
It is relevant only …
Enumerationr/w
Enumerated Values:
1notApplicable
2no
3yes
 .1.3.6.1.4.1.164.3.3.1.6.1.1.10
sysCClkSSubsystemSlot
This entry indicates the Slot from which the S Subsytem Source
will be taken.
The value will be applicable only when the sysCClkSrcMode is
'sSubsystem'.
Enumerationr/w
Enumerated Values:
1notApplicable
3clA
4clB
 .1.3.6.1.4.1.164.3.3.1.6.1.1.11
sysCClkRecoveredID
This entry indicates the Recovered Clock ID.
The value will be applicable only when sysCClkSrcMode is 'recovered'.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.3.1.6.1.1.12

sysCnfgTable

table
.1.3.6.1.4.1.164.3.3.1.6.2 · 1 row entry · 10 columns
Open in standard view 
All the entries of this table are identical (have the 
same value) for all the configurations (1..255) except 
the TmpCnfg.
The write operation into the Table Objects is valid only
for the TmpCnfg entry.
sysCnfgEntry entry .1.3.6.1.4.1.164.3.3.1.6.2.1
An entry in table.
Indexes
sysCnfgIdx
Column Syntax OID
sysCnfgIdx
This attribute indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg.
For Gmux2000 the range limitation (1..255) was discarded
since the Idx is computed as: <IO Card No.> x 1000 +…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.6.2.1.1
sysCMatrixMode
Indicates the TS Matrix Mode:
bidirectional - TS Assignment Matrix is symmetric.
unidirectional - TS Assignment Matrix can be asymmetric.
notApplicable - for agents that do not support this feature.
Enumerationr/w
Enumerated Values:
1notApplicable
2bidirectional
3unidirectional
 .1.3.6.1.4.1.164.3.3.1.6.2.1.2
sysCIsdnFormat
ISDN format. This parameter controls the operation mode of
the ISDN ports.
te - ISDN timing is derived from the signal received
from the equipment it is connected to.
nt - timing of the transmit path is locked to t…
Enumerationr/w
Enumerated Values:
1notApplicable
2te
3nt
 .1.3.6.1.4.1.164.3.3.1.6.2.1.3
sysCRoutingOnEth
Mng Routing Protocol on the online CL Ethernet port,
or on device Ethernet port dedicated for mangement.
Enumerationr/w
Enumerated Values:
1notApplicable
2none
3proprietary
4rip2
5rip1
6rip1and2
 .1.3.6.1.4.1.164.3.3.1.6.2.1.4
sysCAutoConfigEnable
This object enables user to enable/disable activating
the Auto Configuration. When Auto Configuration is activated,
the device learns its configuration Automatically from the Net
it is connected to.
Enumerationr/w
Enumerated Values:
1notApplicable
2disable
3enable
 .1.3.6.1.4.1.164.3.3.1.6.2.1.5
sysCIntTsAllocMode
This object enables user to select the mode of Internal TS
Allocation.
static - user has to select for each Dynamic card port, the
Maximum TSs expected to be connected (including future
growth). This…
Enumerationr/w
Enumerated Values:
1notApplicable
2static
3dynamic
4staticOneToOne
 .1.3.6.1.4.1.164.3.3.1.6.2.1.6
sysCBuPrimaryPort
This object enables the user to configure a Backup mechanism.
If a backup mechanism exists, it is possible to configure the primary port.
The traffic will flow via the primary port when the port functionality is OK.
…
Enumerationr/w
Enumerated Values:
2noBackup
3e1T1orSerial
4eth
 .1.3.6.1.4.1.164.3.3.1.6.2.1.7
sysCEnableLanOverTdm
This object enables/disables transferring traffic from the LAN port
to the TDM port. It is possible to enable only part of the traffic on the
TDM port for security reasons or in order to minimize the bandwidth .
Enumerationr/w
Enumerated Values:
2enableAll
3enableVoiceOnly
4enableVoiceAndMng
 .1.3.6.1.4.1.164.3.3.1.6.2.1.8
sysCSs7FisuSuppression
SS7 Suppresion is used for SS7 Spoofing.
The SS7 spoofing terminates the keep alive messages from the local VMUX
without sending them over the network, thus improving the bandwidth utilization.
FISU means Fill in Se…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.6.2.1.9
sysCBuRecMode
Recovery Mode. This object determines if after recovery
of the Primary Link (used in Vmux) it will become on-line again or not:
auto - automatic. In this case, the failed Link will become
on-line again after recover…
Enumerationr/w
Enumerated Values:
2auto
3manual
 .1.3.6.1.4.1.164.3.3.1.6.2.1.10

sysCRdnTable

table
.1.3.6.1.4.1.164.3.3.1.6.3 · 1 row entry · 23 columns
Open in standard view 
Configuration of all Redundant I/O cards and ports.
The write operation into the table objects is valid only
for the TmpCnfg.
A Slot/Port that have no Redundancy, will not exist in this
table.
sysCRdnEntry entry .1.3.6.1.4.1.164.3.3.1.6.3.1
An entry in table.
Indexes
sysCRdnCnfgIdx sysCRdnPrimeSlot sysCRdnPrimePort
Column Syntax OID
sysCRdnCnfgIdx
This object indicates the Idx of the Cnfg(1..255) being
accessed ; Idx of 255 relates to the TmpCnfg.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.6.3.1.1
sysCRdnPrimeSlot
The slot number of the Primary card of Redundancy.
The Primary card should be the card that user wishes to be
the online card (usually the more important one).
For some Redundancy modes the importance of the redundant
…
Enumeration
Enumerated Values:
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
255notApplicable
 .1.3.6.1.4.1.164.3.3.1.6.3.1.2
sysCRdnPrimePort
The port number.
For DXC:
For external ports the convention used will be:
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in odd numbers:
port1…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.6.3.1.3
sysCRdnSecSlot
The slot number of the Secondary card of Redundancy matching
the Primary slot.
Enumerationr/w
Enumerated Values:
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
255notApplicable
 .1.3.6.1.4.1.164.3.3.1.6.3.1.4
sysCRdnSecPort
The port number.
For DXC:
For external ports the convention used will be:
- first two digits will be: (IO slot number+10)
- last one/two digits will be the port number within the
card, in odd numbers:
port1…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.6.3.1.5
sysCRdnMode
Redundancy Mode.
DXC supports yCable(3), singleSlotProtection(6) and
dualCableParallelTx(4)
MP supports yCable(3), dualCableParallelTx(4), onePlusOne(7)
and oneToOne(8).(dualCableAIS and backup were planned for MP
but w…
Enumerationr/w
Enumerated Values:
2dualCableAIS
3yCable
4dualCableParallelTx
5backup
6singleSlotProtection
7onePlusOne
8oneToOne
9linkAggregation
10manual
11onePlusOneBid
12onePlusOneOpt
13ds0SncProtection
 .1.3.6.1.4.1.164.3.3.1.6.3.1.6
sysCRdnRecMode
Recovery Mode. This object determines if after recovery
of the failed Primary card/port it will become on-line again or not:
auto - automatic . In this case, the failed card/port will become
on-line again after reco…
Enumerationr/w
Enumerated Values:
2auto
3manual
4nonRevertive
 .1.3.6.1.4.1.164.3.3.1.6.3.1.7
sysCRdnRecTime
Redundancy Recovery Time (sec). After switching to the current
online card, the next switch can be performed only after a
minimum time, indicated by this object.
Valid Values: 0..300, 65535.
65535=NA.
This object is a…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.6.3.1.8
sysCRdnHwSwFlip
HW or SW decision for Redundancy Flip.
This object is applicable only for sysCRdnMode=singleSlotProtection.
HW - decision is by I/O card
SW - decision is by CL SW.
Enumerationr/w
Enumerated Values:
1notApplicable
2hw
3sw
 .1.3.6.1.4.1.164.3.3.1.6.3.1.9
sysCRdnRowStatus
This parameter allows NMS to create/delete entries of this table.
The possible supported RowStatus values are
active (1) and destroy (6).

For Vmux-2100 the supported values are:
active (1), createAndGo (4…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.164.3.3.1.6.3.1.10
sysCRdnOnline
Status - who is the Online (current) Redundancy Slot/Port.
This object shows only the Online Slot/Port regarding the Redundancy.
mdlSActivity or prtGenActiveStatus of the same Slot/Port may be Offline.
Enumeration
Enumerated Values:
1notApplicable
2primary
3secondary
 .1.3.6.1.4.1.164.3.3.1.6.3.1.11
sysCRdnSwitchingMode
This object defines which Self Healing Ring (SHR) SDH ring is used:
Uni Directional or BiDirectional. The type of the ring
is defined according to the direction of traffic flow under
normal working conditions.
…
Enumerationr/w
Enumerated Values:
1notApplicable
2biDirectional
3uniDirectional
4linkAggregation
 .1.3.6.1.4.1.164.3.3.1.6.3.1.12
sysCRdnFlipUponEvent
This object allows user to define if Flip to the other port will
be performed (or not), for certain possible events.
Each event is represented by a bit. The value of the object is a sum
of 2**n, according to the bits ha…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.6.3.1.13
sysCRdnLosOrLofTime
This parameter determines the time to wait before switching,
e.g. after failure (as LOF or LOS) is detected on the TDM
Line.
For Ipmux time is counted in msec.
MP uses second units.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.6.3.1.14
sysCRdnEventsTimeWindow
This parameter determines the time window in which
to count events to trigger protection switching.
For Ipmux time is counted in seconds.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.6.3.1.15
sysCRdnSequenceNumberThreshold
This parameter determines the number of Sequence Number errors
that should occur in the time window in order to cause switching.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.6.3.1.16
sysCRdnBufferErrorsThreshold
This parameter determines the number of Buffer undeflow/ overflow events
occured in the time window that cause switching.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.6.3.1.17
sysCRdnBuffUnderrunTime
This parameter determines how much time to wait before switching,
after jitter buffer underrun.
Switching occurs if no frame arrives within that time.
For Ipmux time is counted in msec.
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.1.6.3.1.18
sysCRdnPrimePriority
The Primary port priority.

In ETX2xx/2xxA:
When selecting sysCRdnMode = manual (10),
this parameter determines the forced active port:
low - means that the secondary port is selected to be active
high -…
Enumerationr/w
Enumerated Values:
1notApplicable
2low
3high
 .1.3.6.1.4.1.164.3.3.1.6.3.1.19
sysCRdnSecPriority
The Secondary port priority.
Enumerationr/w
Enumerated Values:
1notApplicable
2low
3high
 .1.3.6.1.4.1.164.3.3.1.6.3.1.20
sysCRdnWTR
Redundancy Wait to Restore (sec).
Valid Values: 0..999, 65535.
65535=NA.
When the value <> 65535, the value of sysCRdnRecTime must be 65535.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.3.1.6.3.1.21
sysCRdnName
A textual name for the redundancy group.
SNMP-FRAMEWORK-MIBSnmpAdminStringr/w
Textual Convention: SNMP-FRAMEWORK-MIBSnmpAdminString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.3.3.1.6.3.1.22
sysCRdnTxDownDurationUponFlip
This object defines the duration (in seconds) the active
port transmission is shut down after flip occurs.
The transmission is shut down and then opened again (after the duration
defined by this object), in order to ca…
Unsigned32r/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.164.3.3.1.6.3.1.23

sysDbaseFlipTable

table
.1.3.6.1.4.1.164.3.3.1.7.4 · 1 row entry · 3 columns
Open in standard view 
Dbase Flip time and activation for every configuration.
sysDbaseFlipEntry entry .1.3.6.1.4.1.164.3.3.1.7.4.1
An entry in table.
Indexes
sysDbaseFlipIdx
Column Syntax OID
sysDbaseFlipIdx
This attribute indicates the Idx of the Cnfg being
the target Configuration.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.3.1.7.4.1.1
sysDbaseFlipTime
This attribute indicates the time (HH:MM) when this data
base will start being used by the Tmp config.
OctetStringr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.1.7.4.1.2
sysDbaseFlipActivation
This attribute indicates if the Dbase flip will be
activated at the time specified for this configuration
(enable) or not (disable).
No more than one flip should be enabled for the same time.
Enumerationr/w
Enumerated Values:
1disable
2enable
 .1.3.6.1.4.1.164.3.3.1.7.4.1.3

mdlSTable

table
.1.3.6.1.4.1.164.3.3.2.1.1 · 1 row entry · 18 columns
Open in standard view 
A table.
mdlSEntry entry .1.3.6.1.4.1.164.3.3.2.1.1.1
An entry in table.
Indexes
mdlSSltIdx
Column Syntax OID
mdlSSltIdx
A unique number to identify a slot position in the DACS.
The Kilomux should use enumerated values starting with kmx.
For IPmux100 use values 1-13, 20.
RAD-TCSlotType
Textual Convention: RAD-TCSlotType Enumeration
Type Values:
1psA
2psB
3clA
4clB
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
20psC
21fan
22ve
101kmxPsA
102kmxPsB
103kmxMlA
104kmxMlB
105kmxCl
106kmxOpt
107kmxIO1
108kmxIO2
109kmxIO3
110kmxIO4
111kmxIO5
112kmxIO6
113kmxIO7
114kmxIO8
115kmxIO9
116kmxIO10
117kmxIO11
118kmxIO12
125io1Ve
126io2Ve
127io3Ve
128io4Ve
129io5Ve
130io6Ve
131io7Ve
132io8Ve
133io9Ve
134io10Ve
135io11Ve
136io12Ve
137io13Ve
138io14Ve
139io15Ve
255notApplicable
 .1.3.6.1.4.1.164.3.3.2.1.1.1.1
mdlSCardType
This attribute indicates the type of the card installed
in the specific slot position.
Only PS's are possible in the PS slots.
Only CL's are possible in the CL slots.
Only IO modules are possible in the IO slots.
Kmux …
RAD-TCCardType
Textual Convention: RAD-TCCardType Enumeration
Type Values:
1unknown
2empty
10psAC
11psDC
18gCl1
19gCl2
20dCl
21kCl
22dcl2
23dcl2Eth
24kClEth
25dcl3
26dcl3Eth
27dcl4
28d4T1
29d8T1
30dT1DSU
31dT1CSU
32dE1DSU
33dE1LTU
34dE1aDSU
35dE1aLTU
36dT1F
37dE1F
38d4E1
39d8E1
40dE1Hdsl
41dT1Hdsl
42dE1HdslS
43dT1HdslS
44d16gsdsl
45d8sl
46d4slStuC
47d4slStuR
50kML1
51kML2
52kML3
53kML4
54kML5
55kML6
56kML7
57kML8
59kML10
60kMLF
61kML10New
62kML11RJ45
63kML11FO
70kLS1
71kLS1New
72kLS2
80kTRE
81kMBE
82kMBENew
83fLAN
90kai
91kdi
92kdiCH
100dHS2
101d8U
102d16U
103d4HS
104d8HS
110kHS1
111kHS2
112kHSU1
113kHSU2
114kHS703
130kVC1EM
131kVC1FXO
132kVC1FXS
133kVC1MEM
134kVC1MFXO
135kVC1MFXS
136kVC1MFXSW
137kVC2EM
138kVC2FXO
139kVC2FXS
140kVC2s1EM
141kVC2s1FXO
142kVC2s1FXS
143kVC3EM
144kVC3FXO
145kVC3FXS
146kVC3S0
170kVF1EM
171kVF1FXO
172kVF1FXS
173kVF3EM
174kVF3FXO
175kVF3FXS
176kVF4EM
177kVF4FXO
178kVF4FXS
179kVF4FXSW
180kVF4S0
181kVF5PbxE1
182kVF5E1PbxSlave
183kVF5PbxT1
184kVF5T1PbxSlave
185kVF5PbxE1New
186kVF5E1PbxSlaveNew
187kVF5PbxT1New
188kVF5T1PbxSlaveNew
189kVF4FXO3
190kVF4FXS3
191kVF4NS0
192kVF6E1s16
193kVF6E1s31
194kVF6T1s12
195kVF6T1s24
196kVF8EM
197kVF8FXO
198kVF8FXS
200dimETUR
201dimV35
202dimRS422
203dimRS530
204dimHssi
205dimX21
206dim10BaseT
207dimE1
208dim100
209dt3G747
210dt3
211dt3f
212de3
213de3f
214dstm1s1
215dstm1s2
216fstm1
217dstm1
218dstm1R
219f2stm1
220gstm1
221goc3
222gstm1D
223goc3D
224gChanOc3
225gChanStm1
270serverE1
271serverT1
272serverE1Pw
273serverT1Pw
280gigabitEth
281gigabitEth2
282eth2
283gigabitEth8
284eth8
290channelizedT3Pw1
300cesT128
301cesE128
302cesT1Pw28
303cesE1Pw28
310vmxE1VeDe
311vmxE1VeDi
312vmxE1ViDe
313vmxE1ViDi
314vmxT1VeDe
315vmxT1VeDi
316vmxT1ViDe
317vmxT1ViDi
318vc12E1UeNe
319vc12E1UeNi
320vc12E1UiNe
321vc12E1UiNi
322vc12T1UeNe
323vc12T1UeNi
324vc12T1UiNe
325vc12T1UiNi
326vca16E1UeNe
327vca16E1UeNi
328vca16E1UiNe
329vca16E1UiNi
330vca16T1UeNe
331vca16T1UeNi
332vca16T1UiNe
333vca16T1UiNi
334vca12E1UeNe
335vca12E1UeNi
336vca12E1UiNe
337vca12E1UiNi
338vca12T1UeNe
339vca12T1UeNi
340vca12T1UiNe
341vca12T1UiNi
342vmg16E1Ue
343vmg16E1Ui
344vmg16T1Ue
345vmg16T1Ui
346vmg12E1Ue
347vmg12E1Ui
348vmg12T1Ue
349vmg12T1Ui
500etx5Mc
501etx5Mc10Ge4
502etx5McSfpPlus
530etx5Pim
531etx5Psu
532etx5Fan
540etx5Gbe20Sfp
541etx5Gbe20Utp
550etx5Io10Gb2Xfp
600etx5cTdmStm1E1
601etx5cTdmStm1T1
602etx5cTdmOc3
603etx5cTdmStm4E1
604etx5cTdmOc12
10001mpUnknown
10002mpEmpty
10009acm
10010ps60W
10011ps100W
10017ps
10020cl1
10021clEth
10022cl2
10023cl2Eth
10024cl3
10025cl3Eth
10026cl1Clk
10031mPh1
10032mPh3
10033mPh1T1DSU
10034mPh1T1CSU
10035mPh1E1DSU
10036mPh1E1LTU
10037mtmlFT1
10038mtmlFE1
10039mtmlH4E1
10040mtmlH4E12W
10041mtmlH4T1
10042mtmlH4T12W
10043mtHsh4E1
10044mtHsh4E12W
10045mtHsh4T1
10046mtHsh4T12W
10047mtmlH2E1
10048mtmlH2E12W
10049mtmlH2T1
10050mtmlH2T12W
10051hsh2E1
10052hsh2E12W
10053hsh2T1
10054hsh2T12W
10055mlIp
10056mtml4Ip
10057ml20N1
10058ml20N2
10060mPl6
10061mPl3
10062vf24T1
10063vf30E1
10064vf48T1
10065vf60E1
10068ml2E1
10069ml4E1
10070ml2T1
10071ml4T1
10072mPv4
10073vc16A
10074vc8EandM
10075vc8Fxo
10076vc8Fxs
10077vc16EandM
10078vc16Fxo
10079vc16Fxs
10080vf3EandM
10081vf3Fxs
10082vf3Fxo
10083vfPbx
10084vfPbxT1
10085vfPbxE1
10086mtMlE2S
10087mtMlE2D
10088mtMlF2T1
10089mtMlF2E1
10090mtMlT1Fiber
10091mtMlE1Fiber
10092mtMlT1FiberFb
10093mtMlE1FiberFb
10094mtmlHE1
10095mtmlH1E1
10096mtmlHSE1
10097ml20
10098mtMl4T1
10099mtMl4E1
10100mtMl1T1DSU
10101mtMl1T1CSU
10102mtMl1E1DSU
10103mtMl1E1LTU
10104mtMl1T1DSUfb
10105mtMl1T1CSUfb
10106mtMl1E1DSUfb
10107mtMl1E1LTUfb
10108mtMl2T1
10109mtMl2E1
10110ls2CcittX50
10111ls2CcittX58
10112ls2ATandTSdm
10113ls2ACcittX50
10114ls2ACcittX58
10115ls2AATandTSdm
10116ls2A2Ts
10117ls2M
10118mtMlT1
10119mtMlE1
10120hs2
10121hs3
10122hsq
10123hs703
10124hsQM
10125hsqN
10126hs6
10127hs12
10128hsDp
10129hsp
10130hs4T1
10131hs4E1
10132hs4
10133hsEth
10134ml8T1
10135ml8E1
10136vc2E1
10137vc4E1
10138vc2T1
10139vc4T1
10140vc2EandM
10141vc2Fxs1Plar
10142vc2Fxo1
10143vc2Fxs2
10144vc2Fxo2
10145vc2Fxs3
10146vc2Fxo3
10147vc26EandM
10148mtvc2
10149vc2R2Fxs
10150hsu
10151mbeA
10152mbeB
10153mbeU
10154tre
10155hsuI
10156hsr
10157hss
10158hsu1
10159ls12
10160ls6
10161ls6V1EandM
10162ls6V1Fxo
10163ls6V1Fxs
10164ls6V2EandM
10165ls6V2Fxo
10166ls6V2Fxs
10167ls6VfEandM
10168ls6VfFxo
10169ls6VfFxs
10170vc3EandM
10171vc3Fxo
10172vc3Fxs
10173vcPbx
10174vcPbxT1
10175vcPbxE1
10176vc6EandM
10177vc6Fxo
10178vc6Fxs
10179vcq
10180ls6n
10181mhs1V36
10182mhs1V35
10183mhs1G703
10184mhs1DDS
10185mhs3
10186mhs1X21
10187mhs1V24
10188mhs4
10189mhsE1Hs
10190mhsT1Hs
10191mhsHyE1Hs
10192mhsHyT1Hs
10193mlfHybE1Hs
10194mlfHybT1Hs
10195mhs2e1
10196mhs2t1
10197mhsHy2e1
10198mhsHy2t1
10199mlfHybE12
10200mls6
10201mls3
10202mlHybAtmE1
10203mlHybAtmT1
10204mlfHybT12
10205mvc8
10206mvc8PbxE1
10207mvc8PbxT1Dsu
10208mvc8PbxT1Csu
10209mvc8PbxE1Slave
10210mvc4
10211mvc4PbxE1
10212mvc4PbxT1Dsu
10213mvc4PbxT1Csu
10214mvc4PbxE1Slave
10215mvc4PbxT1Slave
10216mvc8PbxT1Slave
10217mvc8ExtAnalog
10218mvcE1
10219mvcT1
10220mhsS
10221mhsU
10222mhsPriE1
10223mhsPriT1
10224hsEthSwitch
10225mPriE1FramerCcs
10226mPriT1FramerCcs
10227mPriE1SlaveCcs
10228mPriT1SlaveCcs
10229mDualBri
10230vc12EandM
10231vc12Fxo
10232vc12Fxs
10233vc6aEandM
10234vc6aFxo
10235vc6aFxs
10236vc6AgFxo
10237vc6AgFxs
10238vc6a4LB
10239vid
10240hsu12
10241hsu6
10242hss12
10243hss6
10244hsDp3
10245hsDp6
10246hsf1
10247mhsHyE1
10248mhsHyT1
10249mhsIp
10250mlIpHs
10251mlHybIpE1
10252mlHybIpT1
10253mvg1Lan
10254mvg2Lan
10255vc4Fxs
10256vc4EandM
10257vc4Fxo
10258hsf2
10260mvgSwitch4Lan
10261msl4E1W2
10262msl4E1W4
10263msl8E1W2
10264msl4E1W2Eth
10265msl8E1W2Eth
10266asmi54cE1AndEth
10267asmi54cT1AndEth
10268asmi54c
10269asmi54cE1AndEthPF
10270asmi54cE1PF
10271hs6N
10272hs12N
10273hsNRZ
10281evc2E1
10282evc4E1
10283evc2T1
10284evc4T1
10285vc2E1Pri
10286vc4E1Pri
10291vc4OmniEandM
10292vc4OmniWestern
10301clx1
10302clx1GbE
10303clx1S155
10304clx1S155GbE
10305ml8T1Eth
10306ml8E1Eth
10307op106cEth
10308op108cEth
10309op106cEthT1
10310op108cEthE1
10311op108cEthE1Unbal
10312mpw1
10313op34c
10314op25c
10315op34cE1
10316op25cT1
10317m16e1
10318m16t1
10319op108cE1Unbal
10321vfs24T1
10322vfs30E1
10323vfs48T1
10324vfs60E1
10325mm4E1
10326mm4T1
10327mm8E1
10328mm8T1
10329mm12E1
10330mm12T1
10331mm16E1
10332mm16T1
10340asmi54cE1N
10341asmi54cN
10342asmi54cHsN
10343asmi54cHsAndEthN
10350cl2n
10351cl2GbE
10352cl2s622
10353cl2s622GbE
10354cl2s622GbEa
10360vsG703
11000eth2GF
11050hwRouterEthActive
11051hwRouterEthNotActive
11100sHDSL4W
11101sHDSL8W
11110vdsl24WPots
11111vdsl24WIsdn
11200e1T14F
11201e1T18F
11202t31
11203t32
11300externalPS
11301inletPSAC
11302inletPSDC
 .1.3.6.1.4.1.164.3.3.2.1.1.1.2
mdlSHwVer
This attribute indicates the Hardware version of the
card installed in the specific slot position.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.2.1.1.1.3
mdlSSwVer
This attribute indicates the Software version of the
card installed in the specific slot position.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.2.1.1.1.4
mdlSAlarmStatus
Indicates the current alarm state only for card level.
This object will be set to:
- critical(7): when there is at least one active (ON) critical
alarm .
- major (3): when there is no active critical alar…
Enumeration
Enumerated Values:
2off
3major
4minor
5event
6warning
7critical
 .1.3.6.1.4.1.164.3.3.2.1.1.1.5
mdlSAlarmStatusAll
Indicates the current card alarm state including the
lower level: card, port.
This object will be set to:
- critical(7): when there is at least one active (ON) critical
alarm .
- major (3): when there i…
Enumeration
Enumerated Values:
2off
3major
4minor
5event
6warning
7critical
 .1.3.6.1.4.1.164.3.3.2.1.1.1.6
mdlSTestStatus
This attribute will be on(3) when there is at least
one test running on a port of the module; otherwise the value
will be off(2).
Enumeration
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.2.1.1.1.7
mdlSHwStatus
This attribute will be fail(2) when a HW FAIL exists
on this module (discovered by periodic self test);
otherwise the value will be ok(3).
Enumeration
Enumerated Values:
2fail
3ok
 .1.3.6.1.4.1.164.3.3.2.1.1.1.8
mdlSActivity
notApplicable - when the slot is empty (no module)
offline(1) - when the module is not active (redundant)
online (2) - when the module is active .
Enumeration
Enumerated Values:
1notApplicable
2offline
3online
 .1.3.6.1.4.1.164.3.3.2.1.1.1.9
mdlSAlrClearCmd
Setting this attribute to ON, will enforce a clear
operation on the card level alarms . Upon completion,
the value will automatically change to off(2).
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.2.1.1.1.10
mdlSAlrClearAllCmd
Setting this attribute to ON, will enforce a clear
operation on card and port level alarms . Upon completion,
the value will automatically change to off(2).
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.2.1.1.1.11
mdlSAlrMaskAll
on(3) - will cause masking of all the card level alarms.
These alarms will not be sent to NMS and will not
be taken into account for Alarms Status.
off(2) - will unmask all card level alarms except those
masked via t…
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.2.1.1.1.12
mdlSCmd
General object for any special command at card level.
0=NotApplicable, for cards that don't support this object.

For KML.10(ISDN) card of KM-2100, the object will indicate
Manual Call Command in Switch …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.2.1.1.1.13
mdlSReset
Reset action to be performed on the module.
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.2.1.1.1.14
mdlSRebuildFrame
Applicable only for KiloMux Main Link cards only.
'2' = off, this will be always the Get value.
'3' = on, this is the Set command used to Rebuild the Frame.
Upon completing the operation, the value will automatically …
Enumerationr/w
Enumerated Values:
1notApplicable
2off
3on
 .1.3.6.1.4.1.164.3.3.2.1.1.1.15
mdlSBackupSwVer
This attribute indicates the Backup Software version of the
card installed in the specific slot position.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.2.1.1.1.16
mdlSSecondaryBackupSwVer
This attribute indicates the Secondary Backup Software version of the
card installed in the specific slot position.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.2.1.1.1.17
mdlSPiggybackVer
This attribute indicates the Piggyback version of the
card installed in the specific slot position.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.2.1.1.1.18

mdlCTable

table
.1.3.6.1.4.1.164.3.3.2.1.2 · 1 row entry · 18 columns
Open in standard view 
A table.
mdlCEntry entry .1.3.6.1.4.1.164.3.3.2.1.2.1
An entry in table.
Indexes
mdlCConfigIdx mdlCSlotIdx
Column Syntax OID
mdlCConfigIdx
This object indicates the Configuration number (1..255)
referred.
Value of 255 specifies the TmpCnfg (Scratch).
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.3.2.1.2.1.1
mdlCSlotIdx
This object indicates a unique number of the slot position
in which the module is inserted.
The Kilomux should use enumerated values starting with kmx.
RAD-TCSlotType
Textual Convention: RAD-TCSlotType Enumeration
Type Values:
1psA
2psB
3clA
4clB
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
20psC
21fan
22ve
101kmxPsA
102kmxPsB
103kmxMlA
104kmxMlB
105kmxCl
106kmxOpt
107kmxIO1
108kmxIO2
109kmxIO3
110kmxIO4
111kmxIO5
112kmxIO6
113kmxIO7
114kmxIO8
115kmxIO9
116kmxIO10
117kmxIO11
118kmxIO12
125io1Ve
126io2Ve
127io3Ve
128io4Ve
129io5Ve
130io6Ve
131io7Ve
132io8Ve
133io9Ve
134io10Ve
135io11Ve
136io12Ve
137io13Ve
138io14Ve
139io15Ve
255notApplicable
 .1.3.6.1.4.1.164.3.3.2.1.2.1.2
mdlCProgCardType
This object indicates the card type assigned to the specific
slot in the common configuration.
This object is identical for all the configurations (1..255).
Only the TmpCnf(255) might have a different value.
The write…
RAD-TCCardTyper/w
Textual Convention: RAD-TCCardType Enumeration
Type Values:
1unknown
2empty
10psAC
11psDC
18gCl1
19gCl2
20dCl
21kCl
22dcl2
23dcl2Eth
24kClEth
25dcl3
26dcl3Eth
27dcl4
28d4T1
29d8T1
30dT1DSU
31dT1CSU
32dE1DSU
33dE1LTU
34dE1aDSU
35dE1aLTU
36dT1F
37dE1F
38d4E1
39d8E1
40dE1Hdsl
41dT1Hdsl
42dE1HdslS
43dT1HdslS
44d16gsdsl
45d8sl
46d4slStuC
47d4slStuR
50kML1
51kML2
52kML3
53kML4
54kML5
55kML6
56kML7
57kML8
59kML10
60kMLF
61kML10New
62kML11RJ45
63kML11FO
70kLS1
71kLS1New
72kLS2
80kTRE
81kMBE
82kMBENew
83fLAN
90kai
91kdi
92kdiCH
100dHS2
101d8U
102d16U
103d4HS
104d8HS
110kHS1
111kHS2
112kHSU1
113kHSU2
114kHS703
130kVC1EM
131kVC1FXO
132kVC1FXS
133kVC1MEM
134kVC1MFXO
135kVC1MFXS
136kVC1MFXSW
137kVC2EM
138kVC2FXO
139kVC2FXS
140kVC2s1EM
141kVC2s1FXO
142kVC2s1FXS
143kVC3EM
144kVC3FXO
145kVC3FXS
146kVC3S0
170kVF1EM
171kVF1FXO
172kVF1FXS
173kVF3EM
174kVF3FXO
175kVF3FXS
176kVF4EM
177kVF4FXO
178kVF4FXS
179kVF4FXSW
180kVF4S0
181kVF5PbxE1
182kVF5E1PbxSlave
183kVF5PbxT1
184kVF5T1PbxSlave
185kVF5PbxE1New
186kVF5E1PbxSlaveNew
187kVF5PbxT1New
188kVF5T1PbxSlaveNew
189kVF4FXO3
190kVF4FXS3
191kVF4NS0
192kVF6E1s16
193kVF6E1s31
194kVF6T1s12
195kVF6T1s24
196kVF8EM
197kVF8FXO
198kVF8FXS
200dimETUR
201dimV35
202dimRS422
203dimRS530
204dimHssi
205dimX21
206dim10BaseT
207dimE1
208dim100
209dt3G747
210dt3
211dt3f
212de3
213de3f
214dstm1s1
215dstm1s2
216fstm1
217dstm1
218dstm1R
219f2stm1
220gstm1
221goc3
222gstm1D
223goc3D
224gChanOc3
225gChanStm1
270serverE1
271serverT1
272serverE1Pw
273serverT1Pw
280gigabitEth
281gigabitEth2
282eth2
283gigabitEth8
284eth8
290channelizedT3Pw1
300cesT128
301cesE128
302cesT1Pw28
303cesE1Pw28
310vmxE1VeDe
311vmxE1VeDi
312vmxE1ViDe
313vmxE1ViDi
314vmxT1VeDe
315vmxT1VeDi
316vmxT1ViDe
317vmxT1ViDi
318vc12E1UeNe
319vc12E1UeNi
320vc12E1UiNe
321vc12E1UiNi
322vc12T1UeNe
323vc12T1UeNi
324vc12T1UiNe
325vc12T1UiNi
326vca16E1UeNe
327vca16E1UeNi
328vca16E1UiNe
329vca16E1UiNi
330vca16T1UeNe
331vca16T1UeNi
332vca16T1UiNe
333vca16T1UiNi
334vca12E1UeNe
335vca12E1UeNi
336vca12E1UiNe
337vca12E1UiNi
338vca12T1UeNe
339vca12T1UeNi
340vca12T1UiNe
341vca12T1UiNi
342vmg16E1Ue
343vmg16E1Ui
344vmg16T1Ue
345vmg16T1Ui
346vmg12E1Ue
347vmg12E1Ui
348vmg12T1Ue
349vmg12T1Ui
500etx5Mc
501etx5Mc10Ge4
502etx5McSfpPlus
530etx5Pim
531etx5Psu
532etx5Fan
540etx5Gbe20Sfp
541etx5Gbe20Utp
550etx5Io10Gb2Xfp
600etx5cTdmStm1E1
601etx5cTdmStm1T1
602etx5cTdmOc3
603etx5cTdmStm4E1
604etx5cTdmOc12
10001mpUnknown
10002mpEmpty
10009acm
10010ps60W
10011ps100W
10017ps
10020cl1
10021clEth
10022cl2
10023cl2Eth
10024cl3
10025cl3Eth
10026cl1Clk
10031mPh1
10032mPh3
10033mPh1T1DSU
10034mPh1T1CSU
10035mPh1E1DSU
10036mPh1E1LTU
10037mtmlFT1
10038mtmlFE1
10039mtmlH4E1
10040mtmlH4E12W
10041mtmlH4T1
10042mtmlH4T12W
10043mtHsh4E1
10044mtHsh4E12W
10045mtHsh4T1
10046mtHsh4T12W
10047mtmlH2E1
10048mtmlH2E12W
10049mtmlH2T1
10050mtmlH2T12W
10051hsh2E1
10052hsh2E12W
10053hsh2T1
10054hsh2T12W
10055mlIp
10056mtml4Ip
10057ml20N1
10058ml20N2
10060mPl6
10061mPl3
10062vf24T1
10063vf30E1
10064vf48T1
10065vf60E1
10068ml2E1
10069ml4E1
10070ml2T1
10071ml4T1
10072mPv4
10073vc16A
10074vc8EandM
10075vc8Fxo
10076vc8Fxs
10077vc16EandM
10078vc16Fxo
10079vc16Fxs
10080vf3EandM
10081vf3Fxs
10082vf3Fxo
10083vfPbx
10084vfPbxT1
10085vfPbxE1
10086mtMlE2S
10087mtMlE2D
10088mtMlF2T1
10089mtMlF2E1
10090mtMlT1Fiber
10091mtMlE1Fiber
10092mtMlT1FiberFb
10093mtMlE1FiberFb
10094mtmlHE1
10095mtmlH1E1
10096mtmlHSE1
10097ml20
10098mtMl4T1
10099mtMl4E1
10100mtMl1T1DSU
10101mtMl1T1CSU
10102mtMl1E1DSU
10103mtMl1E1LTU
10104mtMl1T1DSUfb
10105mtMl1T1CSUfb
10106mtMl1E1DSUfb
10107mtMl1E1LTUfb
10108mtMl2T1
10109mtMl2E1
10110ls2CcittX50
10111ls2CcittX58
10112ls2ATandTSdm
10113ls2ACcittX50
10114ls2ACcittX58
10115ls2AATandTSdm
10116ls2A2Ts
10117ls2M
10118mtMlT1
10119mtMlE1
10120hs2
10121hs3
10122hsq
10123hs703
10124hsQM
10125hsqN
10126hs6
10127hs12
10128hsDp
10129hsp
10130hs4T1
10131hs4E1
10132hs4
10133hsEth
10134ml8T1
10135ml8E1
10136vc2E1
10137vc4E1
10138vc2T1
10139vc4T1
10140vc2EandM
10141vc2Fxs1Plar
10142vc2Fxo1
10143vc2Fxs2
10144vc2Fxo2
10145vc2Fxs3
10146vc2Fxo3
10147vc26EandM
10148mtvc2
10149vc2R2Fxs
10150hsu
10151mbeA
10152mbeB
10153mbeU
10154tre
10155hsuI
10156hsr
10157hss
10158hsu1
10159ls12
10160ls6
10161ls6V1EandM
10162ls6V1Fxo
10163ls6V1Fxs
10164ls6V2EandM
10165ls6V2Fxo
10166ls6V2Fxs
10167ls6VfEandM
10168ls6VfFxo
10169ls6VfFxs
10170vc3EandM
10171vc3Fxo
10172vc3Fxs
10173vcPbx
10174vcPbxT1
10175vcPbxE1
10176vc6EandM
10177vc6Fxo
10178vc6Fxs
10179vcq
10180ls6n
10181mhs1V36
10182mhs1V35
10183mhs1G703
10184mhs1DDS
10185mhs3
10186mhs1X21
10187mhs1V24
10188mhs4
10189mhsE1Hs
10190mhsT1Hs
10191mhsHyE1Hs
10192mhsHyT1Hs
10193mlfHybE1Hs
10194mlfHybT1Hs
10195mhs2e1
10196mhs2t1
10197mhsHy2e1
10198mhsHy2t1
10199mlfHybE12
10200mls6
10201mls3
10202mlHybAtmE1
10203mlHybAtmT1
10204mlfHybT12
10205mvc8
10206mvc8PbxE1
10207mvc8PbxT1Dsu
10208mvc8PbxT1Csu
10209mvc8PbxE1Slave
10210mvc4
10211mvc4PbxE1
10212mvc4PbxT1Dsu
10213mvc4PbxT1Csu
10214mvc4PbxE1Slave
10215mvc4PbxT1Slave
10216mvc8PbxT1Slave
10217mvc8ExtAnalog
10218mvcE1
10219mvcT1
10220mhsS
10221mhsU
10222mhsPriE1
10223mhsPriT1
10224hsEthSwitch
10225mPriE1FramerCcs
10226mPriT1FramerCcs
10227mPriE1SlaveCcs
10228mPriT1SlaveCcs
10229mDualBri
10230vc12EandM
10231vc12Fxo
10232vc12Fxs
10233vc6aEandM
10234vc6aFxo
10235vc6aFxs
10236vc6AgFxo
10237vc6AgFxs
10238vc6a4LB
10239vid
10240hsu12
10241hsu6
10242hss12
10243hss6
10244hsDp3
10245hsDp6
10246hsf1
10247mhsHyE1
10248mhsHyT1
10249mhsIp
10250mlIpHs
10251mlHybIpE1
10252mlHybIpT1
10253mvg1Lan
10254mvg2Lan
10255vc4Fxs
10256vc4EandM
10257vc4Fxo
10258hsf2
10260mvgSwitch4Lan
10261msl4E1W2
10262msl4E1W4
10263msl8E1W2
10264msl4E1W2Eth
10265msl8E1W2Eth
10266asmi54cE1AndEth
10267asmi54cT1AndEth
10268asmi54c
10269asmi54cE1AndEthPF
10270asmi54cE1PF
10271hs6N
10272hs12N
10273hsNRZ
10281evc2E1
10282evc4E1
10283evc2T1
10284evc4T1
10285vc2E1Pri
10286vc4E1Pri
10291vc4OmniEandM
10292vc4OmniWestern
10301clx1
10302clx1GbE
10303clx1S155
10304clx1S155GbE
10305ml8T1Eth
10306ml8E1Eth
10307op106cEth
10308op108cEth
10309op106cEthT1
10310op108cEthE1
10311op108cEthE1Unbal
10312mpw1
10313op34c
10314op25c
10315op34cE1
10316op25cT1
10317m16e1
10318m16t1
10319op108cE1Unbal
10321vfs24T1
10322vfs30E1
10323vfs48T1
10324vfs60E1
10325mm4E1
10326mm4T1
10327mm8E1
10328mm8T1
10329mm12E1
10330mm12T1
10331mm16E1
10332mm16T1
10340asmi54cE1N
10341asmi54cN
10342asmi54cHsN
10343asmi54cHsAndEthN
10350cl2n
10351cl2GbE
10352cl2s622
10353cl2s622GbE
10354cl2s622GbEa
10360vsG703
11000eth2GF
11050hwRouterEthActive
11051hwRouterEthNotActive
11100sHDSL4W
11101sHDSL8W
11110vdsl24WPots
11111vdsl24WIsdn
11200e1T14F
11201e1T18F
11202t31
11203t32
11300externalPS
11301inletPSAC
11302inletPSDC
 .1.3.6.1.4.1.164.3.3.2.1.2.1.3
mdlCNoOfExtPrt
Number of external ports in the programmed module of
the specific slot position
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.2.1.2.1.4
mdlCNoOfIntPrt
Number of internal ports in the programmed module of
the specific slot position.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.2.1.2.1.5
mdlCParam
General configuration object at card level (per configuration).
NotApplicable=0, for cards that don't support this object.

For D8U and D16U cards of DXC, the object will indicate
the port on which BERT …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.2.1.2.1.6
mdlCAdminStatus
The desired state of the module.

Module adminStatus should be managed for all modules in the shelf.
When adminStatus is 'down', this module is not operational i.e.
this module doesn't handle traffic and d…
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.164.3.3.2.1.2.1.7
mdlCActualCardType
This object defines actual card type.
RAD-TCCardType
Textual Convention: RAD-TCCardType Enumeration
Type Values:
1unknown
2empty
10psAC
11psDC
18gCl1
19gCl2
20dCl
21kCl
22dcl2
23dcl2Eth
24kClEth
25dcl3
26dcl3Eth
27dcl4
28d4T1
29d8T1
30dT1DSU
31dT1CSU
32dE1DSU
33dE1LTU
34dE1aDSU
35dE1aLTU
36dT1F
37dE1F
38d4E1
39d8E1
40dE1Hdsl
41dT1Hdsl
42dE1HdslS
43dT1HdslS
44d16gsdsl
45d8sl
46d4slStuC
47d4slStuR
50kML1
51kML2
52kML3
53kML4
54kML5
55kML6
56kML7
57kML8
59kML10
60kMLF
61kML10New
62kML11RJ45
63kML11FO
70kLS1
71kLS1New
72kLS2
80kTRE
81kMBE
82kMBENew
83fLAN
90kai
91kdi
92kdiCH
100dHS2
101d8U
102d16U
103d4HS
104d8HS
110kHS1
111kHS2
112kHSU1
113kHSU2
114kHS703
130kVC1EM
131kVC1FXO
132kVC1FXS
133kVC1MEM
134kVC1MFXO
135kVC1MFXS
136kVC1MFXSW
137kVC2EM
138kVC2FXO
139kVC2FXS
140kVC2s1EM
141kVC2s1FXO
142kVC2s1FXS
143kVC3EM
144kVC3FXO
145kVC3FXS
146kVC3S0
170kVF1EM
171kVF1FXO
172kVF1FXS
173kVF3EM
174kVF3FXO
175kVF3FXS
176kVF4EM
177kVF4FXO
178kVF4FXS
179kVF4FXSW
180kVF4S0
181kVF5PbxE1
182kVF5E1PbxSlave
183kVF5PbxT1
184kVF5T1PbxSlave
185kVF5PbxE1New
186kVF5E1PbxSlaveNew
187kVF5PbxT1New
188kVF5T1PbxSlaveNew
189kVF4FXO3
190kVF4FXS3
191kVF4NS0
192kVF6E1s16
193kVF6E1s31
194kVF6T1s12
195kVF6T1s24
196kVF8EM
197kVF8FXO
198kVF8FXS
200dimETUR
201dimV35
202dimRS422
203dimRS530
204dimHssi
205dimX21
206dim10BaseT
207dimE1
208dim100
209dt3G747
210dt3
211dt3f
212de3
213de3f
214dstm1s1
215dstm1s2
216fstm1
217dstm1
218dstm1R
219f2stm1
220gstm1
221goc3
222gstm1D
223goc3D
224gChanOc3
225gChanStm1
270serverE1
271serverT1
272serverE1Pw
273serverT1Pw
280gigabitEth
281gigabitEth2
282eth2
283gigabitEth8
284eth8
290channelizedT3Pw1
300cesT128
301cesE128
302cesT1Pw28
303cesE1Pw28
310vmxE1VeDe
311vmxE1VeDi
312vmxE1ViDe
313vmxE1ViDi
314vmxT1VeDe
315vmxT1VeDi
316vmxT1ViDe
317vmxT1ViDi
318vc12E1UeNe
319vc12E1UeNi
320vc12E1UiNe
321vc12E1UiNi
322vc12T1UeNe
323vc12T1UeNi
324vc12T1UiNe
325vc12T1UiNi
326vca16E1UeNe
327vca16E1UeNi
328vca16E1UiNe
329vca16E1UiNi
330vca16T1UeNe
331vca16T1UeNi
332vca16T1UiNe
333vca16T1UiNi
334vca12E1UeNe
335vca12E1UeNi
336vca12E1UiNe
337vca12E1UiNi
338vca12T1UeNe
339vca12T1UeNi
340vca12T1UiNe
341vca12T1UiNi
342vmg16E1Ue
343vmg16E1Ui
344vmg16T1Ue
345vmg16T1Ui
346vmg12E1Ue
347vmg12E1Ui
348vmg12T1Ue
349vmg12T1Ui
500etx5Mc
501etx5Mc10Ge4
502etx5McSfpPlus
530etx5Pim
531etx5Psu
532etx5Fan
540etx5Gbe20Sfp
541etx5Gbe20Utp
550etx5Io10Gb2Xfp
600etx5cTdmStm1E1
601etx5cTdmStm1T1
602etx5cTdmOc3
603etx5cTdmStm4E1
604etx5cTdmOc12
10001mpUnknown
10002mpEmpty
10009acm
10010ps60W
10011ps100W
10017ps
10020cl1
10021clEth
10022cl2
10023cl2Eth
10024cl3
10025cl3Eth
10026cl1Clk
10031mPh1
10032mPh3
10033mPh1T1DSU
10034mPh1T1CSU
10035mPh1E1DSU
10036mPh1E1LTU
10037mtmlFT1
10038mtmlFE1
10039mtmlH4E1
10040mtmlH4E12W
10041mtmlH4T1
10042mtmlH4T12W
10043mtHsh4E1
10044mtHsh4E12W
10045mtHsh4T1
10046mtHsh4T12W
10047mtmlH2E1
10048mtmlH2E12W
10049mtmlH2T1
10050mtmlH2T12W
10051hsh2E1
10052hsh2E12W
10053hsh2T1
10054hsh2T12W
10055mlIp
10056mtml4Ip
10057ml20N1
10058ml20N2
10060mPl6
10061mPl3
10062vf24T1
10063vf30E1
10064vf48T1
10065vf60E1
10068ml2E1
10069ml4E1
10070ml2T1
10071ml4T1
10072mPv4
10073vc16A
10074vc8EandM
10075vc8Fxo
10076vc8Fxs
10077vc16EandM
10078vc16Fxo
10079vc16Fxs
10080vf3EandM
10081vf3Fxs
10082vf3Fxo
10083vfPbx
10084vfPbxT1
10085vfPbxE1
10086mtMlE2S
10087mtMlE2D
10088mtMlF2T1
10089mtMlF2E1
10090mtMlT1Fiber
10091mtMlE1Fiber
10092mtMlT1FiberFb
10093mtMlE1FiberFb
10094mtmlHE1
10095mtmlH1E1
10096mtmlHSE1
10097ml20
10098mtMl4T1
10099mtMl4E1
10100mtMl1T1DSU
10101mtMl1T1CSU
10102mtMl1E1DSU
10103mtMl1E1LTU
10104mtMl1T1DSUfb
10105mtMl1T1CSUfb
10106mtMl1E1DSUfb
10107mtMl1E1LTUfb
10108mtMl2T1
10109mtMl2E1
10110ls2CcittX50
10111ls2CcittX58
10112ls2ATandTSdm
10113ls2ACcittX50
10114ls2ACcittX58
10115ls2AATandTSdm
10116ls2A2Ts
10117ls2M
10118mtMlT1
10119mtMlE1
10120hs2
10121hs3
10122hsq
10123hs703
10124hsQM
10125hsqN
10126hs6
10127hs12
10128hsDp
10129hsp
10130hs4T1
10131hs4E1
10132hs4
10133hsEth
10134ml8T1
10135ml8E1
10136vc2E1
10137vc4E1
10138vc2T1
10139vc4T1
10140vc2EandM
10141vc2Fxs1Plar
10142vc2Fxo1
10143vc2Fxs2
10144vc2Fxo2
10145vc2Fxs3
10146vc2Fxo3
10147vc26EandM
10148mtvc2
10149vc2R2Fxs
10150hsu
10151mbeA
10152mbeB
10153mbeU
10154tre
10155hsuI
10156hsr
10157hss
10158hsu1
10159ls12
10160ls6
10161ls6V1EandM
10162ls6V1Fxo
10163ls6V1Fxs
10164ls6V2EandM
10165ls6V2Fxo
10166ls6V2Fxs
10167ls6VfEandM
10168ls6VfFxo
10169ls6VfFxs
10170vc3EandM
10171vc3Fxo
10172vc3Fxs
10173vcPbx
10174vcPbxT1
10175vcPbxE1
10176vc6EandM
10177vc6Fxo
10178vc6Fxs
10179vcq
10180ls6n
10181mhs1V36
10182mhs1V35
10183mhs1G703
10184mhs1DDS
10185mhs3
10186mhs1X21
10187mhs1V24
10188mhs4
10189mhsE1Hs
10190mhsT1Hs
10191mhsHyE1Hs
10192mhsHyT1Hs
10193mlfHybE1Hs
10194mlfHybT1Hs
10195mhs2e1
10196mhs2t1
10197mhsHy2e1
10198mhsHy2t1
10199mlfHybE12
10200mls6
10201mls3
10202mlHybAtmE1
10203mlHybAtmT1
10204mlfHybT12
10205mvc8
10206mvc8PbxE1
10207mvc8PbxT1Dsu
10208mvc8PbxT1Csu
10209mvc8PbxE1Slave
10210mvc4
10211mvc4PbxE1
10212mvc4PbxT1Dsu
10213mvc4PbxT1Csu
10214mvc4PbxE1Slave
10215mvc4PbxT1Slave
10216mvc8PbxT1Slave
10217mvc8ExtAnalog
10218mvcE1
10219mvcT1
10220mhsS
10221mhsU
10222mhsPriE1
10223mhsPriT1
10224hsEthSwitch
10225mPriE1FramerCcs
10226mPriT1FramerCcs
10227mPriE1SlaveCcs
10228mPriT1SlaveCcs
10229mDualBri
10230vc12EandM
10231vc12Fxo
10232vc12Fxs
10233vc6aEandM
10234vc6aFxo
10235vc6aFxs
10236vc6AgFxo
10237vc6AgFxs
10238vc6a4LB
10239vid
10240hsu12
10241hsu6
10242hss12
10243hss6
10244hsDp3
10245hsDp6
10246hsf1
10247mhsHyE1
10248mhsHyT1
10249mhsIp
10250mlIpHs
10251mlHybIpE1
10252mlHybIpT1
10253mvg1Lan
10254mvg2Lan
10255vc4Fxs
10256vc4EandM
10257vc4Fxo
10258hsf2
10260mvgSwitch4Lan
10261msl4E1W2
10262msl4E1W4
10263msl8E1W2
10264msl4E1W2Eth
10265msl8E1W2Eth
10266asmi54cE1AndEth
10267asmi54cT1AndEth
10268asmi54c
10269asmi54cE1AndEthPF
10270asmi54cE1PF
10271hs6N
10272hs12N
10273hsNRZ
10281evc2E1
10282evc4E1
10283evc2T1
10284evc4T1
10285vc2E1Pri
10286vc4E1Pri
10291vc4OmniEandM
10292vc4OmniWestern
10301clx1
10302clx1GbE
10303clx1S155
10304clx1S155GbE
10305ml8T1Eth
10306ml8E1Eth
10307op106cEth
10308op108cEth
10309op106cEthT1
10310op108cEthE1
10311op108cEthE1Unbal
10312mpw1
10313op34c
10314op25c
10315op34cE1
10316op25cT1
10317m16e1
10318m16t1
10319op108cE1Unbal
10321vfs24T1
10322vfs30E1
10323vfs48T1
10324vfs60E1
10325mm4E1
10326mm4T1
10327mm8E1
10328mm8T1
10329mm12E1
10330mm12T1
10331mm16E1
10332mm16T1
10340asmi54cE1N
10341asmi54cN
10342asmi54cHsN
10343asmi54cHsAndEthN
10350cl2n
10351cl2GbE
10352cl2s622
10353cl2s622GbE
10354cl2s622GbEa
10360vsG703
11000eth2GF
11050hwRouterEthActive
11051hwRouterEthNotActive
11100sHDSL4W
11101sHDSL8W
11110vdsl24WPots
11111vdsl24WIsdn
11200e1T14F
11201e1T18F
11202t31
11203t32
11300externalPS
11301inletPSAC
11302inletPSDC
 .1.3.6.1.4.1.164.3.3.2.1.2.1.8
mdlCOperStatus
The current operational state of the module.

up
The physical module agrees with the pre-provisioned card type,
and the configuration of the module succeeded.

down
There are one or more prob…
Enumeration
Enumerated Values:
1up
2down
3notPresent
 .1.3.6.1.4.1.164.3.3.2.1.2.1.9
mdlCDetailedStatus
The module current status.

When moduleOperStatus is down(2), but not as a result of
setting the moduleAdminStatus to down(2), this object contains
the failure reason or reasons.

The moduleO…
Bits
Enumerated Values:
0initializing
1cardMismatch
2initFailed
3provisionFailed
4selfTestFailed
5commFailure
6bpInterfaceFailure
7configurationMismatch
8noInputPower
 .1.3.6.1.4.1.164.3.3.2.1.2.1.10
mdlCEntPhysicalIndex
The object contains index of the related entPhysicalEntry of the
ENTITY-MIB, see RFC4133. It points the relevant card and not the
card slot. The agent should build this index accordign to the rules
that are defined by t…
ENTITY-MIBPhysicalIndexOrZero
Textual Convention: ENTITY-MIBPhysicalIndexOrZero Integer32
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.164.3.3.2.1.2.1.11
mdlCReset
Reset action to be performed on the module.
Agent should set mdlCReset to off (2) during initialization.
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.2.1.2.1.12
mdlCConfigMismatchReason
This object details the card configuration mismatch
in case the object mdlCDetailedStatus is equal to configurationMismatch(7)
Enumeration
Enumerated Values:
1s128KbpsInSynchronousMode
2s14k4KbpsConfiguration
3s28k8KbpsConfiguration
4s48KbpsConfiguration
5s56KbpsInSynchronousMode
6s7k2KbpsConfiguration
7adpcmConfiguration
8dceOnDteHwInSynchronousMode
9dteOnDceHwInSynchronousMode
10rlbLlbInV110RateAdaptation
11swNotSupportingAdvancedSignaling
12signalingConfiguration
13stratum1WithoutOcxo
14stratum2WithoutOcxo
15useOf4TdmBusesInChassis
16winkStartModeConfiguration
2147483647other
 .1.3.6.1.4.1.164.3.3.2.1.2.1.13
mdlCIpAddressType
The object defines type of the mdlCIpAddress as defined
in the InetAddress MIB: IPv4 or IPv6.
INET-ADDRESS-MIBInetAddressTyper/w
Textual Convention: INET-ADDRESS-MIBInetAddressType Enumeration
Type Values:
0unknown
1ipv4
2ipv6
3ipv4z
4ipv6z
16dns
25l2vpn
 .1.3.6.1.4.1.164.3.3.2.1.2.1.14
mdlCIpAddress
The object defines card IP address that will be associated
with the card loopback IP interface.
INET-ADDRESS-MIBInetAddressr/w
Textual Convention: INET-ADDRESS-MIBInetAddress OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.3.3.2.1.2.1.15
mdlCHardwareFailureReason Enumeration
Enumerated Values:
1other
2ringerVoltageFailure
3fanFailure
 .1.3.6.1.4.1.164.3.3.2.1.2.1.16
mdlCFanControl
The desired state of the fan.

Module fan control shall manage all fans on the module, if there are more than one.
When mdlCFanControl is 'up', all module's fans must be in on state.
When mdlCFanControl is…
Enumerationr/w
Enumerated Values:
1up
2down
 .1.3.6.1.4.1.164.3.3.2.1.2.1.22
mdlCFanOperStatus
The current operational state of the module's fans. Provides the
aggregated state of all fans, if there are more than one on the module.
…
Enumeration
Enumerated Values:
1up
2down
3notPresent
 .1.3.6.1.4.1.164.3.3.2.1.2.1.23

mdlAlrTable

table
.1.3.6.1.4.1.164.3.3.2.1.3.1 · 1 row entry · 8 columns
Open in standard view 
The list of card alarms.
mdlAlrEntry entry .1.3.6.1.4.1.164.3.3.2.1.3.1.1
An entry in table.
Indexes
mdlAlrSltIdx mdlAlrIdx
Column Syntax OID
mdlAlrIdx
A unique number to identify an entry in the alarm status
table.
Users should use the get next function to read this table
because the indexes are not consecutive
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.2.1.3.1.1.1
mdlAlrSltIdx
This attribute indicates the desired slot position.
The Kilomux should use enumerated values starting with kmx.
RAD-TCSlotType
Textual Convention: RAD-TCSlotType Enumeration
Type Values:
1psA
2psB
3clA
4clB
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
20psC
21fan
22ve
101kmxPsA
102kmxPsB
103kmxMlA
104kmxMlB
105kmxCl
106kmxOpt
107kmxIO1
108kmxIO2
109kmxIO3
110kmxIO4
111kmxIO5
112kmxIO6
113kmxIO7
114kmxIO8
115kmxIO9
116kmxIO10
117kmxIO11
118kmxIO12
125io1Ve
126io2Ve
127io3Ve
128io4Ve
129io5Ve
130io6Ve
131io7Ve
132io8Ve
133io9Ve
134io10Ve
135io11Ve
136io12Ve
137io13Ve
138io14Ve
139io15Ve
255notApplicable
 .1.3.6.1.4.1.164.3.3.2.1.3.1.1.2
mdlAlrCode
This object indicates a code related to a specific
alarm description. The list of codes and their related
descriptions will be sent to NMS request (for display purpose)
by alrGenTable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.2.1.3.1.1.3
mdlAlrState
This object indicates the card alarm severity.
Enumeration
Enumerated Values:
3event
4minor
5major
6warning
7critical
 .1.3.6.1.4.1.164.3.3.2.1.3.1.1.4
mdlAlarmMask
Alarm Mask is : on/off.
Enumeration
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.2.1.3.1.1.5
mdlAlarmInvert
Alarm Invert is : on/off.
Enumeration
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.2.1.3.1.1.6
mdlAlarmOnOff
Alarm state is : on/off.
Enumeration
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.2.1.3.1.1.7
mdlAlarmCounter
A counter - how many times the alarm occured (ON) since last
clear operation or since last Reset.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.2.1.3.1.1.8

mdlAlrMaskTable

table
.1.3.6.1.4.1.164.3.3.2.1.3.2 · 1 row entry · 2 columns
Open in standard view 
The list of card masked alarms.
mdlAlrMaskEntry entry .1.3.6.1.4.1.164.3.3.2.1.3.2.1
An entry in table.
Indexes
mdlAlrMaskSltIdx
Column Syntax OID
mdlAlrMaskSltIdx
This attribute indicates the desired slot position.
The Kilomux should use enumerated values starting with kmx.
RAD-TCSlotType
Textual Convention: RAD-TCSlotType Enumeration
Type Values:
1psA
2psB
3clA
4clB
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
20psC
21fan
22ve
101kmxPsA
102kmxPsB
103kmxMlA
104kmxMlB
105kmxCl
106kmxOpt
107kmxIO1
108kmxIO2
109kmxIO3
110kmxIO4
111kmxIO5
112kmxIO6
113kmxIO7
114kmxIO8
115kmxIO9
116kmxIO10
117kmxIO11
118kmxIO12
125io1Ve
126io2Ve
127io3Ve
128io4Ve
129io5Ve
130io6Ve
131io7Ve
132io8Ve
133io9Ve
134io10Ve
135io11Ve
136io12Ve
137io13Ve
138io14Ve
139io15Ve
255notApplicable
 .1.3.6.1.4.1.164.3.3.2.1.3.2.1.1
mdlAlrMask
This object is a mask that indicates which card level
alarms are masked. The masked alarms (their bit is set to
'1') are neither sent to the manager, nor taken into account
for alarm status and LEDs.
Bit no. = Alarm c…
OctetStringr/w
Constraints:
range: 8-10
 .1.3.6.1.4.1.164.3.3.2.1.3.2.1.2

mdlClTable

table
.1.3.6.1.4.1.164.3.3.2.2.1 · 1 row entry · 5 columns
Open in standard view 
A table.
mdlClEntry entry .1.3.6.1.4.1.164.3.3.2.2.1.1
An entry in table.
Indexes
mdlClIdx
Column Syntax OID
mdlClIdx
This object indicates the Cl slot referred.
Enumeration
Enumerated Values:
3clA
4clB
 .1.3.6.1.4.1.164.3.3.2.2.1.1.1
mdlClSwchStatus
This object indicates the status of the switches on
the referred DCL card.
Each switch is represented by a bit. The status is a sum
of 2**n, according to the bits. There are 4 switches:
bit 0 SP-PAR (LSB) '1' - Defau…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.2.2.1.1.2
mdlClLastFlipDate
Date when last flip occured.
The format would be as specified by the sysSDateFormat.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.2.2.1.1.3
mdlClLastFlipTime
Time when last flip occured.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.2.2.1.1.4
mdlClLastFlipCause
The cause of last flip.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.2.2.1.1.5

mdlPsTable

table
.1.3.6.1.4.1.164.3.3.2.3.1 · 1 row entry · 6 columns
Open in standard view 
A table.
mdlPsEntry entry .1.3.6.1.4.1.164.3.3.2.3.1.1
An entry in table.
Indexes
mdlPsIdx
Column Syntax OID
mdlPsIdx
This object indicates the PS card referred.
RAD-TCSlotType
Textual Convention: RAD-TCSlotType Enumeration
Type Values:
1psA
2psB
3clA
4clB
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
20psC
21fan
22ve
101kmxPsA
102kmxPsB
103kmxMlA
104kmxMlB
105kmxCl
106kmxOpt
107kmxIO1
108kmxIO2
109kmxIO3
110kmxIO4
111kmxIO5
112kmxIO6
113kmxIO7
114kmxIO8
115kmxIO9
116kmxIO10
117kmxIO11
118kmxIO12
125io1Ve
126io2Ve
127io3Ve
128io4Ve
129io5Ve
130io6Ve
131io7Ve
132io8Ve
133io9Ve
134io10Ve
135io11Ve
136io12Ve
137io13Ve
138io14Ve
139io15Ve
255notApplicable
 .1.3.6.1.4.1.164.3.3.2.3.1.1.1
mdlPsStatus
This object indicates the status of the PS card.
Enumeration
Enumerated Values:
1notActive
2active
 .1.3.6.1.4.1.164.3.3.2.3.1.1.2
mdlPsTestResult
This object indicates the result of the PS test.
ok (1) - the test passed successfully.
f12V (2) - 12V FAIL was detected.
f5V (3) - 5V FAIL was detected.
fMinus5V (4) - Minus 5V FAIL was dete…
Enumeration
Enumerated Values:
1ok
2f12V
3f5V
4fMinus5V
5fFanVoltage
6fMainVoltage
 .1.3.6.1.4.1.164.3.3.2.3.1.1.3
mdlPsVoltageCurrent
Current PS voltage is in Millivolt.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.2.3.1.1.4
mdlPsVoltageMin
Minumum PS voltage in Millivolt.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.2.3.1.1.5
mdlPsVoltageMax
Maximum PS voltage in Millivolt.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.2.3.1.1.6

prtGenParamTable

table
.1.3.6.1.4.1.164.3.3.3.1.1 · 1 row entry · 19 columns
Open in standard view 
A table.
prtGenEntry entry .1.3.6.1.4.1.164.3.3.3.1.1.1
An entry in table.
Indexes
prtGenPrtIdx
Column Syntax OID
prtGenPrtIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside/external, inside/internal.

In the Kilo…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.1.1.1
prtGenSlt
This attribute indicates a unique number to identify the slot where
the card is inserted in.
When the unit is stand-alone, this object is not applicable
and 255 will be used.
The Kilomux should use the enumerated starti…
Enumeration
Enumerated Values:
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
103kmxMlA
104kmxMlB
105kmxCl
106kmxOpt
107kmxIO1
108kmxIO2
109kmxIO3
110kmxIO4
111kmxIO5
112kmxIO6
113kmxIO7
114kmxIO8
115kmxIO9
116kmxIO10
117kmxIO11
118kmxIO12
255standAlone
 .1.3.6.1.4.1.164.3.3.3.1.1.1.2
prtGenExtInt
This attribute describes the type of the designated port.
Exteral port is a port with a physical connector. Internal
port might be of two types, one is a composite port which
collects data of a few external ports i…
Enumeration
Enumerated Values:
2external
3internal
 .1.3.6.1.4.1.164.3.3.3.1.1.1.3
prtGenIfIndex
This attribute indicates the unique interface number
assigned to the port. The specific interface of this
attribute is the same as the interface identified by the
value of ifindex in MIB-II.If there is no interfac…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.1.1.4
prtGenActiveStatus
This attribute describes the activity status of the port.
unknown(1) indicates that the information is not supported.
notUsed(2) indicates that the port is not connected according
to the active config.
offLin…
Enumeration
Enumerated Values:
1unknown
2notUsed
3offLine
4onLine
5offLineRedundancy
6onLineRedundancy
 .1.3.6.1.4.1.164.3.3.3.1.1.1.5
prtGenAlrStatus
Indicates the alarm state at port (ch) agent level.
This object will be:
- critical(7): when there is at least one active (ON) critical
alarm .
- major (3): when there is no active critical alarm, but the…
Enumeration
Enumerated Values:
2off
3major
4minor
5event
6warning
7critical
 .1.3.6.1.4.1.164.3.3.3.1.1.1.6
prtGenTestStatus
This attribute will be on(3) when there is at least one test
in progress (running) on the port; otherwise the value will
be off(2).
Enumeration
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.3.1.1.1.7
prtGenTestMask
This is a mask which indicates which tests from the
'prtGenTestCmd' list are allowed for the selected port.
If a specific test is allowed, its respective bit will be SET
in the mask :

TEST …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.1.1.8
prtGenTestCmd
Setting this object to a value as detailed furter on
(except 0) will initiate a test on the specific port,
if the operation is allowed (according to TestMask).
If the operation is not allowed, the mux will ignore the…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.1.1.9
prtGenTestRunning
This object indicates which tests are running currently on
the selected port (initiated by user and/or by the system).
If a specific test is currently running on the port, its
respective bit will be SET:
…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.1.1.10
prtGenType
This object describes the type of the selected port.
idsl - applicable for external ports of HS-U cards (of DXC) when
interface is LT-1.
Enumeration
Enumerated Values:
1unknown
2t1
3e1
4hs
5t1Csu
6t1Dsu
7e1Ltu
8e1Dsu
9hdsl
10sp
11t1F
12e1F
13dim
14isdn
15t3
16e3
17t3f
18e3f
19idsl
20stm1
21vc4
22vc12
23msdsl
24vc11
25vc3
26soh
27eth
28shdsl
255other
 .1.3.6.1.4.1.164.3.3.3.1.1.1.11
prtGenInterfaceType
This attribute indicates a unique HW interface type of the
selected port.
Examples:
- for T1 cards: DSU, CSU
- for E1 cards: DSU, LTU
- for HS cards: v35, rs422, x21
etc...
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.3.1.1.1.12
prtGenAlrClearCmd
Setting this attribute to ON, will enforce a clear
operation on the port level alarms . Upon completion,
the value will automatically change to off(2).
noOp - will be used by agents that do not support this
f…
Enumerationr/w
Enumerated Values:
1noOp
2off
3on
 .1.3.6.1.4.1.164.3.3.3.1.1.1.13
prtGenAlrMaskAll
on(3) - will mask all the alarms of the selected port
off(2)- will unmask all alarms of the selected port except
the ones selected by the prtAlrMaskTable.
noOp - will be used by agents that do not support this
…
Enumerationr/w
Enumerated Values:
1noOp
2off
3on
 .1.3.6.1.4.1.164.3.3.3.1.1.1.14
prtGenParamStatus
This object indicates Status of parameters specific to the
selected port.
- For a port that has no special status or is supported
by prtSExHsfStatTable - 1 Octet: 00hex

- For HS cards (Dxc cards) - 1 o…
OctetString .1.3.6.1.4.1.164.3.3.3.1.1.1.15
prtGenRdnStatus
This object indicates if this port is part of a redundant pair and in
this case, if it is On or Off.

none(1) - No redundancy or Not Applicable
off (2) - the port is part of a redundant pair and it is …
Enumeration
Enumerated Values:
1none
2off
3on
 .1.3.6.1.4.1.164.3.3.3.1.1.1.16
prtGenTestMaskXP
This is an Expanded test mask of the prtGenTestMask object.
The prtGenTestMask object reached its maximum, being an Integer with 31 bits.
This object indicates which tests from the 'prtGenTestCmdXP' list are
allowed f…
OctetString .1.3.6.1.4.1.164.3.3.3.1.1.1.17
prtGenTestCmdXP
This is an Expanded test command of the prtGenTestCmd object.
The prtGenTestCmd object reached its maximum, being an Integer with 31 bits.
Setting this object to a value as detailed furter on
(except 0) will initiate a…
OctetStringr/w .1.3.6.1.4.1.164.3.3.3.1.1.1.18
prtGenTestRunningXP
This is an Expanded object of the prtGenTestRunning object.
The prtGenTestRunning object reached its maximum, being an Integer with 31 bits.
This object indicates which tests are running currently on
the selected port …
OctetString .1.3.6.1.4.1.164.3.3.3.1.1.1.19

prtGenTestDurationTable

table
.1.3.6.1.4.1.164.3.3.3.1.2 · 1 row entry · 3 columns
Open in standard view 
A table.
prtGenTestDurationEntry entry .1.3.6.1.4.1.164.3.3.3.1.2.1
An entry in table.
Indexes
prtGenTestPrtIdx prtGenTestIdx
Column Syntax OID
prtGenTestPrtIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside/external, inside/internal.

In the Kilo…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.2.1.1
prtGenTestIdx
This attribute indicates the test, the duration refers.
Enumeration
Enumerated Values:
1localLoop
2remoteLoop
3bert
4plb
5rlb
6llb
7toneInjection
8txInband
9rxInband
10remLoopOnRemUnit
11bertOnRemUnit
12llbOnRemUnit
14txPlb
15txLlb
16dteLoop
20hdslTxInband
21hdslRxInband
22monitor
23userLineLoopback
26lbbd
27lb1
28lb2
30tsRemoteLoop
32downstreamAis
33upstreamAis
34sendRdi
 .1.3.6.1.4.1.164.3.3.3.1.2.1.2
prtGenTestDuration
This attribute indicates the maximum duration of executing
a test on the specific port. This entry applies to the
specified test . The resolution will be a minute, and the
maximum duration is limited to 30 minutes .
A z…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.2.1.3

prtGenTsTable

table
.1.3.6.1.4.1.164.3.3.3.1.3 · 1 row entry · 6 columns
Open in standard view 
The write operation into the Table's Objects is valid only
for the TmpCnfg entry (Scratch),exept some products 
which enable direct writing to the ActiveCnfg. 
This is written in the respective product's spec.
prtGenTsEntry entry .1.3.6.1.4.1.164.3.3.3.1.3.1
An entry in table.
Indexes
prtGenTsCnfgIdx prtGenTsPrtIdx prtGenTsIdx
Column Syntax OID
prtGenTsCnfgIdx
This attribute indicates the Idx of the Cnfg(1..255) being
accessed.
Idx of 255 relates to the TmpCnfg.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.3.3.1.3.1.1
prtGenTsPrtIdx
This attribute indicates a unique port number.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside,
SP.
In the DXC :
- first two digits will be: (IO slot numb…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.3.1.2
prtGenTsIdx
This attribute indicates a unique time slot position.
The valid time slots are
1..25 for T1 Card (25=Fbit)
0..31 for E1 or HS Card .
In G732S-E1 lines time slot 16 is not valid for data,
it is dedicated for multifra…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.3.1.3
prtGenTsType
The type of Timeslot.
If the source or destination port is an HS port,'TS Type'
must be 'data'.
nc - means that this TimeSlot is not connected.
voice, data, vcMP - also mean that this TS is connected.
mng - means t…
Enumerationr/w
Enumerated Values:
1unknown
2voice
3data
4vcMP
5nc
6mng
 .1.3.6.1.4.1.164.3.3.3.1.3.1.4
prtGenTsIConPrt
This attribute indicates the internally (In Mux)
connected port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside,
SP.
* The outside ports will be the T1/E…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.3.1.5
prtGenTsIConTs
This attribute indicates a unique time slot position.
The valid time slots are
1..25 for T1 Card (25=Fbit)
0..31 for E1 (or HS) Card.
In G732S-E1 lines time slot 16 is not valid for data, it is
dedicated for multifr…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.3.1.6

prtSAlarmTable

table
.1.3.6.1.4.1.164.3.3.3.1.4.1 · 1 row entry · 8 columns
Open in standard view 
A table.
prtSAlarmEntry entry .1.3.6.1.4.1.164.3.3.3.1.4.1.1
An entry in table.
Indexes
prtSAlarmPrtIdx prtSAlarmIdx
Column Syntax OID
prtSAlarmIdx
A unique number to identify an entry in the alarm status
table.
Users should use the get next function to read this table
because the indexes are not consecutive.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.4.1.1.1
prtSAlarmPrtIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside/external, inside/internal.

In the Kilo…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.4.1.1.2
prtSAlarmCode
This object indicates a code related to a specific
alarm description. The list of codes and their related
descriptions will be sent to NMS request (for display purpose)
by alrGenTable.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.4.1.1.3
prtSAlarmState
This object indicates the port alarm severity.
Enumeration
Enumerated Values:
3event
4minor
5major
6warning
7critical
 .1.3.6.1.4.1.164.3.3.3.1.4.1.1.4
prtSAlarmMask
Alarm Mask is : on/off.
Enumeration
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.3.1.4.1.1.5
prtSAlarmInvert
Alarm Invert is : on/off.
Enumeration
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.3.1.4.1.1.6
prtSAlarmOnOff
Alarm state is : on/off.
Enumeration
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.3.1.4.1.1.7
prtSAlarmCounter
A counter - how many times the alarm occured (ON) since last
clear operation or since last Reset.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.4.1.1.8

prtAlrMaskTable

table
.1.3.6.1.4.1.164.3.3.3.1.4.2 · 1 row entry · 2 columns
Open in standard view 
A table.
prtAlrMaskEntry entry .1.3.6.1.4.1.164.3.3.3.1.4.2.1
An entry in table.
Indexes
prtAlrMaskPrtIdx
Column Syntax OID
prtAlrMaskPrtIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside/external, inside/internal.

In the Kilo…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.4.2.1.1
prtAlrMask
This object is a mask that indicates which port level
alarms are masked. The masked alarms (their bit is set to
'1') are neither sent to the manager, nor taken into account
for alarm status and LEDs.
Bit no. = Alarm c…
OctetStringr/w
Constraints:
range: 8-8
 .1.3.6.1.4.1.164.3.3.3.1.4.2.1.2

prtBertTable

table
.1.3.6.1.4.1.164.3.3.3.1.5 · 1 row entry · 16 columns
Open in standard view 
This table includes the BERT parameters, counters and 
commands.
The configurable parameters:
- prtBertPattern
- prtBertInjectRate
- prtBertTs
- prtBertDirection
are not Set per configuration (same for all Configurations)
but start being applied by the Agent only upon successful
Update/Download operation. Therefore, Set will enter the 
values to the Temporary Configuration of the agent, while
Get will get the values of the Active Configuration.
prtBertEntry entry .1.3.6.1.4.1.164.3.3.3.1.5.1
An entry in table.
Indexes
prtBertPrtIdx
Column Syntax OID
prtBertPrtIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside/external, inside/internal.

In the Kilo…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.5.1.1
prtBertPattern
This object indicates the pattern of the BERT.
p2Exxm1 = 2Exx-1.
pxx = pattern xx.
This object is the same for all configurations.
notApplicable - when this object is not supported.
Enumerationr/w
Enumerated Values:
1p2E3m1
2p2E4m1
3p2E5m1
4p2E6m1
5p2E7m1
6p511
7p2E10m1
8p2047
9p2E15m1
10p2E17m1
11p2E18m1
12p2E20m1
13qrss
14p2E21m1
15p2E22m1
16p2E23m1
17p2E25m1
18p2E28m1
19p2E29m1
20p2E31m1
21p2E32m1
22rj011
23p63
24p1M7S
25p1S7M
26alternate
27mark
28space
29p2E11m1
255notApplicable
 .1.3.6.1.4.1.164.3.3.3.1.5.1.2
prtBertInjectRate
This object indicates the error rate injection of the BERT.
r10Emx = 10E-x
This object is the same for all configurations.
single - single error injection.
notApplicable - when this object is not supported.
Enumerationr/w
Enumerated Values:
1noError
2r10Em1
3r10Em2
4r10Em3
5r10Em4
6r10Em5
7r10Em6
8r10Em7
9single
255notApplicable
 .1.3.6.1.4.1.164.3.3.3.1.5.1.3
prtBertInjectErrRateCmd
This object controls activation/deactivation of the Error
Rate Injection during BERT.
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.3.1.5.1.4
prtBertInjectSingleErrCmd
This object enables to initiate a Single Error Injection
during BERT (on). Upon completion, the value will
automatically change to off(2).
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.3.1.5.1.5
prtBertRunTime
This object indicates how much time (seconds) passed since
BERT started to run.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.5.1.6
prtBertESs
How many Errored Seconds were detected since BERT started
to run.
Counter for Kmux and MP.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.5.1.7
prtBertSyncLoss
How many times Sync Loss was detected since BERT started
to run.
For some products: number of seconds in which Sync Loss occured
since BERT started to run. See product specification.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.5.1.8
prtBertErrorBits
How many Error Bits were detected since BERT started
to run.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.5.1.9
prtBertClearCounters
Setting this object to ON, will enforce a clear
operation of some BERT Counters. Upon completion,
the value will automatically change to off(2).
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.3.1.5.1.10
prtBertSyncStatus
Sync Status while BERT runs.
Enumeration
Enumerated Values:
1notApplicable
2syncLoss
3sync
 .1.3.6.1.4.1.164.3.3.3.1.5.1.11
prtBertTs
This object indicates on which TSs of the selected port, BERT
should be applied.
Each Bit of the Octet represents a TS:
31 ......0
MSB LSB

Bit 0 will not be used.
If the bit value is '1' - BERT shou…
OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.164.3.3.3.1.5.1.12
prtBertResult
This object indicates Result of BERT
for the selected port
(number of error bits divided to the total
number of data bits.)
Applicable only if BERT is running on this port

Agents that do not support this…
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.3.1.5.1.13
prtBertTxBits
How many data bits were transmitted since BERT started
to run, or since last counter clear
(prtBertClearCounters set to on).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.5.1.14
prtBertRxBits
How many data bits were Received since BERT started
to run, or since last counter clear
(prtBertClearCounters set to on).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.5.1.15
prtBertTxErrorBits
Number of injected error bits since BERT started
to run, or since last counter clear
(prtBertClearCounters set to on).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.5.1.16

prtMonTable

table
.1.3.6.1.4.1.164.3.3.3.1.6 · 1 row entry · 6 columns
Open in standard view 
For DXC, the write operation into the Table's Objects is valid only
for the TmpCnfg entry (Scratch).
prtMonEntry entry .1.3.6.1.4.1.164.3.3.3.1.6.1
An entry in table.
Indexes
prtMonCnfgIdx prtMonitoringIdx
Column Syntax OID
prtMonCnfgIdx
This object indicates the Idx of the Cnfg(1..255) being
accessed.
Idx of 255 relates to the TmpCnfg.
For products that do not support configurations, 1 will be always used.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.3.3.1.6.1.1
prtMonitoringIdx
This object indicates the Monitoring Port Index.
For DXC:
The valid port number depends on the IO slot no., the
installed card type and the port type: external, internal.
* The external ports will according to the con…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.6.1.2
prtMonitoringEnable
This object indicates if the prtMonitoringIdx is configured as
a monitoring port or not.
disabled = the port is NOT configured to monitor. Setting this object
to this value will cause reset (to 0) of the…
Enumerationr/w
Enumerated Values:
1notApplicable
2disabled
3enabled
 .1.3.6.1.4.1.164.3.3.3.1.6.1.3
prtMonitoringTSs
This object indicates which TSs of the Monitoring port,
the test equipment should monitor.
Each Bit of the Octet represents a TS:
31 ......0
MSB LSB

Bit 0 will not be used.
If the bit value is '1' -…
OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.164.3.3.3.1.6.1.4
prtMonitoredPort
This object indicates the MONITORED Port Index that the Monitoring
port monitors.
For DXC:
The valid port number depends on the IO slot no., the
installed card type and the port type: external, internal.
* T…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.6.1.5
prtMonitoredTSs
This object indicates which TSs of the Monitored port, should be monitored.
Each Bit of the Octet represents a TS:
31 ......0
MSB LSB

Bit 0 will not be used.
If the bit value is '1' - this TS should …
OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.164.3.3.3.1.6.1.6

prtCfgParamTable

table
.1.3.6.1.4.1.164.3.3.3.1.7.1 · 1 row entry · 10 columns
Open in standard view 
The write operation into the Table Objects is valid only
to the TmpCnfg entry.
KMUX parameters are for the cards: KMBE/New, KVF.6 family.
prtCfgParamEntry entry .1.3.6.1.4.1.164.3.3.3.1.7.1.1
An entry in table.
Indexes
prtCfgParamCnfgIdx prtCfgParamIdx
Column Syntax OID
prtCfgParamCnfgIdx
This attribute indicates the Idx of the Cnfg (1..100) being
accessed.
Idx 255 relates to the TmpCnfg.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.3.3.1.7.1.1.1
prtCfgParamIdx
A unique identifier of the port (within the card when applicable).
- For KM-2100: Slot*100+Ch
external ports: Ch=1..10
internal ports (sub-channels): Ch=11..20.
- For FCD-T1/E1(L): MAIN=111, SUB=113, CH1=122, CH2=…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.1.7.1.1.2
prtCfgParamSlt
This attribute indicates a unique number to identify the slot where
the card is inserted in.
In the 2104 Unit the entries kmxIO5(111)..kmxIO12(118) are not valid.
notApplicable(255) - for products that do not have Slots.
Enumeration
Enumerated Values:
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
107kmxIO1
108kmxIO2
109kmxIO3
110kmxIO4
111kmxIO5
112kmxIO6
113kmxIO7
114kmxIO8
115kmxIO9
116kmxIO10
117kmxIO11
118kmxIO12
255notApplicable
 .1.3.6.1.4.1.164.3.3.3.1.7.1.1.3
prtCfgParamOperatedMl
The main link for this channel.
The field is relevant only for ML modes of Dual, Priority
Bumping and Switched Backup.
Enumerationr/w
Enumerated Values:
1notApplicable
103kmxMlA
104kmxMlB
 .1.3.6.1.4.1.164.3.3.3.1.7.1.1.4
prtCfgParamMlAtoMlBPrio
ML-A to ML-B Priority.
The field is relevant only for ML modes of Priority Bumping
and Switched Backup.
Enumerationr/w
Enumerated Values:
1notApplicable
2low
3high
 .1.3.6.1.4.1.164.3.3.3.1.7.1.1.5
prtCfgParamMlBtoMlAPrio
ML-B to ML-A Priority.
The field is relevant only for ML modes of Priority Bumping.
Enumerationr/w
Enumerated Values:
1notApplicable
2low
3high
 .1.3.6.1.4.1.164.3.3.3.1.7.1.1.6
prtCfgParamInbandLoopDetection
Inband Loop Detection.
The field is relevant for FCD-T1/E1(L) ports.
Enumerationr/w
Enumerated Values:
1notApplicable
2disabled
3enabled
 .1.3.6.1.4.1.164.3.3.3.1.7.1.1.7
prtCfgParamInbandLoopPatternCfg
This object indicates if Inband Loop polynomial pattern
will be according to RDL Loop (the standard) or User Configurated
according to prtCfgParamInbandLoopActPattern and
prtCfgParamInbandLoopDeactPattern.
Enumerationr/w
Enumerated Values:
1notApplicable
2rdlLoop
3userConfig
 .1.3.6.1.4.1.164.3.3.3.1.7.1.1.8
prtCfgParamInbandLoopActPattern
This object is a binary string of up to 8 bits.
Though the syntax allows for any ASCII characters, for this object
only '0' or '1' characters are valid.
The string determines coefficients of the polynomial pattern
sent …
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.3.3.3.1.7.1.1.9
prtCfgParamInbandLoopDeactPattern
This object is a binary string of up to 8 bits.
Though the syntax allows for any ASCII characters, for this object
only '0' or '1' characters are valid.
The string determines coefficients of the polynomial pattern
sent …
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.3.3.3.1.7.1.1.10

prtT1E1StatTable

table
.1.3.6.1.4.1.164.3.3.3.2.1 · 1 row entry · 5 columns
Open in standard view 
T1/E1 port statistics table.
prtT1E1StatEntry entry .1.3.6.1.4.1.164.3.3.3.2.1.1
An entry in the T1/E1 port statistics table.
Indexes
prtT1E1SPrtIdx
Column Syntax OID
prtT1E1SPrtIdx
This attribute indicates a unique port number.
The same numbering as for prtGenPrtIdx.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside.
* The outside port…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.2.1.1.1
prtT1E1SSlt
This attribute indicates a unique number to identify the slot where
the card is inserted in.
When the unit is stand-alone, this object is not applicable
and 255 will be used.
Enumeration
Enumerated Values:
3clA
4clB
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
255standAlone
 .1.3.6.1.4.1.164.3.3.3.2.1.1.2
prtT1E1OosCount
This object is applicable only for an E1 active port.
It provides the number of red alarm events since the last
count clearing.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.3.3.2.1.1.3
prtT1E1BpvLastMin
This object is applicable only for an E1 active port.
It provides the number of BPV (BiPolar Violation) events
detected during the last minute.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.3.3.2.1.1.4
prtT1E1BpvMax
This object is applicable only for an E1 active port.
It provides the maximal number of BPV (BiPolar Violation)
events (per minute), detected during the worst minute.
SNMPv2-SMIGauge32
Textual Convention: SNMPv2-SMIGauge32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.164.3.3.3.2.1.1.5

prtT1E1CnfgTable

table
.1.3.6.1.4.1.164.3.3.3.2.2 · 1 row entry · 37 columns
Open in standard view 
T1/E1 port configuration table.
prtT1E1CnfgEntry entry .1.3.6.1.4.1.164.3.3.3.2.2.1
An entry in the T1/E1 port configuration table.
Indexes
prtT1E1CnfgIdx prtT1E1PrtIdx
Column Syntax OID
prtT1E1CnfgIdx
This attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.3.3.2.2.1.1
prtT1E1PrtIdx
This attribute indicates a unique port number.
The same numbering as for prtGenPrtIdx.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside.
In the DX…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.2.2.1.2
prtT1E1Slt
This attribute indicates a unique number to identify the slot where
the card is inserted in.
When the unit is stand-alone, this object is not applicable
and 255 will be used.
Enumeration
Enumerated Values:
3clA
4clB
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
103kmxMlA
104kmxMlB
106kmxOpt
107kmxIO1
108kmxIO2
109kmxIO3
110kmxIO4
111kmxIO5
112kmxIO6
113kmxIO7
114kmxIO8
115kmxIO9
116kmxIO10
117kmxIO11
118kmxIO12
255standAlone
 .1.3.6.1.4.1.164.3.3.3.2.2.1.3
prtT1E1LineType
This variable indicates the variety of T1/E1
Line implementing this circuit. The type of
circuit affects the number of bits per second
that the circuit can reasonably carry, as well
as the interpretation of th…
Enumerationr/w
Enumerated Values:
1other
2esf
3d4
4e1
5e1Crc
6e1MF
7e1CrcMF
8unframed
 .1.3.6.1.4.1.164.3.3.3.2.2.1.4
prtT1E1LineCode
This variable describes the variety of Zero
Code Suppression used on the link, which in
turn affects a number of its characteristics.

jbzs=b7zs refers the Jammed Bit Zero Suppres-
sion, in whi…
Enumerationr/w
Enumerated Values:
1jbzs
2b8zs
3hdb3
4zbtsi
5ami
6other
 .1.3.6.1.4.1.164.3.3.3.2.2.1.5
prtT1E1SignalMode
'none' indicates that no bits are reserved for
signaling on this channel.

'robbedBit' indicates that T1 Robbed Bit Signaling is in use.

'bitOriented' indicates that E1 Channel Associated
…
Enumerationr/w
Enumerated Values:
1none
2robbedBit
3bitOriented
4messageOriented
 .1.3.6.1.4.1.164.3.3.3.2.2.1.6
prtT1E1Fdl
This bitmap describes the use of the facili-
ties data link, and is the sum of the capabili-
ties:

'other' indicates that a protocol other than
one following is used.

'ansi-T1-403' ref…
Enumerationr/w
Enumerated Values:
1other
2ansi-T1-403
4att-54016
8fdl-none
16transFdl
 .1.3.6.1.4.1.164.3.3.3.2.2.1.7
prtT1E1FdlMode
Fdl Mode of the T1 selected port.
notApplicable - will be used for an E1 port.
Enumerationr/w
Enumerated Values:
1other
2user
3carrier
255notApplicable
 .1.3.6.1.4.1.164.3.3.3.2.2.1.8
prtT1E1Sync
This object enables returning to normal operation, after
the end of a main/sub link red alarm event, in reduced time.
'tr62411' - complies with AT&T TR-62411 (after 10 seconds).
Applicable for both T1 and E…
Enumerationr/w
Enumerated Values:
1other
2tr62411
3ccitt
4fast
 .1.3.6.1.4.1.164.3.3.3.2.2.1.9
prtT1E1CGA
This object selects the method used to signal the CGA state
to the other end, through the main/sub link.
'none' - non-transparent mode. When one of the links
(main/sub) will be in Out Of Service state, both…
Enumerationr/w
Enumerated Values:
1none
2trans
3full
 .1.3.6.1.4.1.164.3.3.3.2.2.1.10
prtT1E1IdleCode
This object selects the code transmitted to fill idle
(unused) time slots in the main link frame.
Valid range: (0 - FF HEX) .
OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.164.3.3.3.2.2.1.11
prtT1E1OosSignal
'idle' = '0' = on-hook, idle state
'busy' = '1' = off-hook, busy state
'forcedIdle' = SP = both A and B signaling bits are forced
to '0' during out-of-service periods.
'forcedBusy' = MK = both A and B sig…
Enumerationr/w
Enumerated Values:
2notsupported
3forcedIdle
4forcedBusy
5busyIdle
6idleBusy
 .1.3.6.1.4.1.164.3.3.3.2.2.1.12
prtT1E1VoiceOos
Voice Out-Of-Service code. Valid range: (0 - FF HEX).
For agents that do not support this feature, the value will
always be 0.
OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.164.3.3.3.2.2.1.13
prtT1E1DataOos
Data Out-Of-Service code. Valid range: (0 - FF HEX).
For agents that do not support this feature, the value will
always be 0.
OctetStringr/w
Constraints:
range: 0-4
 .1.3.6.1.4.1.164.3.3.3.2.2.1.14
prtT1E1LineLengthMask
This attribute is the line length mask parameter used only
for T1/DSU interfaces.
len400p533ft=length range: 400ft to 533ft
'fcc68' - provides compliance with the FCC 68.308 Option A
output pulse mask.
Enumerationr/w
Enumerated Values:
1unknown
2len0p133ft
3len134p266ft
4len267p399ft
5len400p533ft
6len534p655ft
7fcc68
 .1.3.6.1.4.1.164.3.3.3.2.2.1.15
prtT1E1TxGainMask
This attribute is the tx gain mask parameter (dB), used
only for T1/CSU interfaces.
Enumerationr/w
Enumerated Values:
1notApplicable
2txGain0db
3txGain7dot5db
4txGain15db
5txGain22dot5db
 .1.3.6.1.4.1.164.3.3.3.2.2.1.16
prtT1E1InbandMng
A unique number to identify an Inband management over the
link.
internal - supported by KM-2100 only. It means that the management is internal
to the frame. It takes part of the ML Frame bits (instead of dat…
Enumerationr/w
Enumerated Values:
2off
3fdlOrTs0
4dedicatedTs
5dedicatedPpp
6dedicatedFr
7internal
 .1.3.6.1.4.1.164.3.3.3.2.2.1.17
prtT1E1InbandMngRate
A unique number to identify the rate of the Inband management.
It is required only for E1 links and is applicable only when
prtExT1E1InbandMng selected is FdlOrTs0 or dedicatedTs.
Enumerationr/w
Enumerated Values:
1notApplicable
2r4k
3r8k
4r12k
5r16k
6r32k
7r64k
8r20k
 .1.3.6.1.4.1.164.3.3.3.2.2.1.18
prtT1E1DedicatedTs
The value is differently determined for different products.
There are two methods:

1) A unique number to identify Dedicated TS of the T1/E1 port.
It is applicable only when prtExT1E1InbandMng selected …
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.2.2.1.19
prtT1E1InbandMngRoutProt
Inband Mng Routing Protocol of the port.
When prtT1E1InbandMng is 'dedicatedPpp'-'proprietary' and
'rip2' are applicable.
For other values - only 'proprietary' is applicable.
…
Enumerationr/w
Enumerated Values:
1notApplicable
2none
3proprietary
4rip2
 .1.3.6.1.4.1.164.3.3.3.2.2.1.20
prtT1E1LinkMode
regular - TSs are connected by user via TS Assignment only
transparent - when a port with this Link Mode is connected to an
internal T1/E1 port of a T3/E3 card, TS0, TS16 and Fbit
are transp…
Enumerationr/w
Enumerated Values:
1notApplicable
2regular
3transparent
 .1.3.6.1.4.1.164.3.3.3.2.2.1.21
prtT1E1Multiplier
The data rate of each TS. The multiplier values
can be 56 kbps or 64 kbps. For T1 only.
Enumerationr/w
Enumerated Values:
1notApplicable
2br56
3br64
 .1.3.6.1.4.1.164.3.3.3.2.2.1.22
prtT1E1RxGain
This attribute is the rx volume (dB).
Enumerationr/w
Enumerated Values:
1notApplicable
2rxGain12dB
3rxGain30dB
4rxGain36dB
5shortHaul
6longHaul
7rxGain20dB
 .1.3.6.1.4.1.164.3.3.3.2.2.1.23
prtT1E1RAI
Remote Alarm Signal
Enumerationr/w
Enumerated Values:
1notApplicable
2off
3on
 .1.3.6.1.4.1.164.3.3.3.2.2.1.24
prtT1E1LineMode
Interface type of the port.
For T1 - csu, dsu are the valid values
For E1 - dsu, ltu are the valid values
Enumerationr/w
Enumerated Values:
1notApplicable
2csu
3dsu
4ltu
 .1.3.6.1.4.1.164.3.3.3.2.2.1.25
prtT1E1TS0SaBits
This object is applicable only for E1 ports. For T1, string size will be 0.
For E1, it enables user to select the use of TS0 Sa Bits 4..8, by 3 octets:
The order (in hexa display):
free Sa-Bit-4 Sa-Bit-5 Sa-Bit-6 …
OctetStringr/w .1.3.6.1.4.1.164.3.3.3.2.2.1.26
prtT1E1ConnectedTS
This parameter indicates if there is any connected TS for this interface.
Enumeration
Enumerated Values:
1notApplicable
2no
3yes
 .1.3.6.1.4.1.164.3.3.3.2.2.1.27
prtT1E1Ts0SaBit
This parameter indicates whether to send TS 0, or not.
noMng= TS 0 is looped, therefore not sent.
mng= TS 0 isn't looped, therefore it is sent.
Enumerationr/w
Enumerated Values:
1notApplicable
2noMng
3mng
 .1.3.6.1.4.1.164.3.3.3.2.2.1.28
prtT1E1SameFeCnfg
This parameter indicates whether the same E1 configuration
parameters and TS assignment are set both to the local
and remote device.
Read-Write access is applicable only in G732N framed mode.
For G732S and UNFRAMED thi…
Enumerationr/w
Enumerated Values:
1notApplicable
2no
3yes
 .1.3.6.1.4.1.164.3.3.3.2.2.1.29
prtT1E1RemCrc4
This object indicates whether the E1 of the Remote device
connected to this E1 port, will have CRC-4 or not.
Enumerationr/w
Enumerated Values:
1notApplicable
2no
3yes
 .1.3.6.1.4.1.164.3.3.3.2.2.1.30
prtT1E1MaxTSs
This object is applicable only for DXC D4T1, D4E1, D8T1, D8E1
external ports and D8GSL internal E1 ports.
It is relevant only when sysCIntTsAllocMode=static(2).
255=not applicable
If prtT1E1LineType=unframed(8), th…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.2.2.1.31
prtT1E1EocTsConfig
This object indicates whether the use of EOC for TS Configuration
is enabled or not.
Enumerationr/w
Enumerated Values:
1notApplicable
2disabled
3enabled
 .1.3.6.1.4.1.164.3.3.3.2.2.1.32
prtT1E1Role
This object indicates whether this port behaves as SUB or Main link.
Enumerationr/w
Enumerated Values:
1notApplicable
2sub
3main
 .1.3.6.1.4.1.164.3.3.3.2.2.1.33
prtT1E1PppEchoFailDetection
This object indicates whether the PPP Echo is taken into account
for its Fail Detection.
This object is relevant when Inband Mng between devices is Dedicated TS PPP.
Default=Disable.
Enable - will be selected main…
Enumerationr/w
Enumerated Values:
1notApplicable
2disable
3enable
 .1.3.6.1.4.1.164.3.3.3.2.2.1.34
prtT1E1CasOosPattern
This objects defines the Cas Out-Of-Service code
space (1) - see prtT1E1CasOosSpaceCode below
mark (2) - see prtT1E1CasOosMarkCode below
spaceMark (3) - transmit 'space' for 2 sec and
'mark' for 2 sec …
Enumerationr/w
Enumerated Values:
1space
2mark
3spaceMark
 .1.3.6.1.4.1.164.3.3.3.2.2.1.36
prtT1E1CasOosSpaceCode
This objects defines the Cas Out-Of-Service code
The value that will be transmitted when
prtT1E1CasOosPattern = space (1).
default = 14.
Unsigned32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.164.3.3.3.2.2.1.37
prtT1E1CasOosMarkCode
This objects defines the Cas Out-Of-Service code
The value that will be transmitted when
prtT1E1CasOosPattern = mark (2).
default = 1.
Unsigned32r/w
Constraints:
range: 0-15
 .1.3.6.1.4.1.164.3.3.3.2.2.1.38

prtT1E1FdlMsgTable

table
.1.3.6.1.4.1.164.3.3.3.2.3 · 1 row entry · 4 columns
Open in standard view 
This table is applicable for a T1 interface with 'esf'
LineType or E1 interface, when CRC is enabled (LineType).
prtT1E1FdlMsgEntry entry .1.3.6.1.4.1.164.3.3.3.2.3.1
An entry in table.
Indexes
prtT1E1FdlMsgPrtIdx prtT1E1FdlMsgFdlType
Column Syntax OID
prtT1E1FdlMsgPrtIdx
This attribute indicates a unique port number.
The same numbering as for prtGenPrtIdx.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside.
* The outs…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.2.3.1.1
prtT1E1FdlMsgFdlType
The Fdl type reference of the Fdl message.
Enumeration
Enumerated Values:
1send
2receive
 .1.3.6.1.4.1.164.3.3.3.2.3.1.2
prtT1E1FdlMsgSlt
This attribute indicates a unique number to identify the slot where
the card is inserted in.
When the unit is stand-alone, this object is not applicable
and 255 will be used.
Enumeration
Enumerated Values:
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
255standAlone
 .1.3.6.1.4.1.164.3.3.3.2.3.1.3
prtT1E1FdlMsg
FDL message.
OctetString .1.3.6.1.4.1.164.3.3.3.2.3.1.4

prtHSParamTable

table
.1.3.6.1.4.1.164.3.3.3.3.1 · 1 row entry · 16 columns
Open in standard view 
A table.
prtHSParamEntry entry .1.3.6.1.4.1.164.3.3.3.3.1.1
An entry in table.
Indexes
prtHSCnfgIdx prtHSPrtIdx
Column Syntax OID
prtHSCnfgIdx
This attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.3.3.3.1.1.1
prtHSPrtIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside,
SP.
* The inside ports will be the HS cards …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.3.1.1.2
prtHSSlt
This attribute indicates a unique number to identify the slot where
the card is inserted in.
When the unit is stand-alone, this object is not applicable
and 255 will be used.
Enumeration
Enumerated Values:
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
255standAlone
 .1.3.6.1.4.1.164.3.3.3.3.1.1.3
prtHSRate
This object indicates the port rate (speed).
auto - rate is selected automatically by system.
Enumerationr/w
Enumerated Values:
1r0x56eq0Kbps
2r1x56eq56Kbps
3r2x56eq112Kbps
4r3x56eq168Kbps
5r4x56eq224Kbps
6r5x56eq280Kbps
7r6x56eq336Kbps
8r7x56eq392Kbps
9r8x56eq448Kbps
10r9x56eq504Kbps
11r10x56eq560Kbps
12r11x56eq616Kbps
13r12x56eq672Kbps
14r13x56eq728Kbps
15r14x56eq784Kbps
16r15x56eq840Kbps
17r16x56eq896Kbps
18r17x56eq952Kbps
19r18x56eq1008Kbps
20r19x56eq1064Kbps
21r20x56eq1120Kbps
22r21x56eq1176Kbps
23r22x56eq1232Kbps
24r23x56eq1288Kbps
25r24x56eq1344Kbps
26r25x56eq1400Kbps
27r26x56eq1456Kbps
28r27x56eq1512Kbps
29r28x56eq1568Kbps
30r29x56eq1624Kbps
31r30x56eq1680Kbps
32r31x56eq1736Kbps
33r0x64eq0Kbps
34r1x64eq64Kbps
35r2x64eq128Kbps
36r3x64eq192Kbps
37r4x64eq256Kbps
38r5x64eq320Kbps
39r6x64eq384Kbps
40r7x64eq448Kbps
41r8x64eq512Kbps
42r9x64eq576Kbps
43r10x64eq640Kbps
44r11x64eq704Kbps
45r12x64eq768Kbps
46r13x64eq832Kbps
47r14x64eq896Kbps
48r15x64eq960Kbps
49r16x64eq1024Kbps
50r17x64eq1088Kbps
51r18x64eq1152Kbps
52r19x64eq1216Kbps
53r20x64eq1280Kbps
54r21x64eq1344Kbps
55r22x64eq1408Kbps
56r23x64eq1472Kbps
57r24x64eq1536Kbps
58r25x64eq1600Kbps
59r26x64eq1664Kbps
60r27x64eq1728Kbps
61r28x64eq1792Kbps
62r29x64eq1856Kbps
63r30x64eq1920Kbps
64r31x64eq1984Kbps
65r32x64eq2048Kbps
66r32x56eq1792Kbps
67r64x64eq4096Kbps
200auto
 .1.3.6.1.4.1.164.3.3.3.3.1.1.4
prtHSFifoSize
This object selects the size of the user data channel buffer
FIFO used in the DTE2 mode. In the other modes, buffer
size is automatically set by the DACS agent.
Buffer FIFO size in bits, corresponds to FIFO lengths of…
Enumerationr/w
Enumerated Values:
1auto
2b32bit
3b60bit
4b104bit
5b144bit
255notApplicable
 .1.3.6.1.4.1.164.3.3.3.3.1.1.5
prtHSClkMode
Clock Mode of the user data channel.
dce - DACS operates as a DCE and provides transmit
and receive clocks to the synchronous user DTE.
dte1- DACS supplies the receive clock to the user
equipment and acce…
Enumerationr/w
Enumerated Values:
1dce
2dte1
3dte2
255notApplicable
 .1.3.6.1.4.1.164.3.3.3.3.1.1.6
prtHSCTS
Selection of CTS line state in the user data channel.
on - CTS continuously ON.
rts - CTS line follows the RTS line.
Enumerationr/w
Enumerated Values:
1on
2rts
255notApplicable
 .1.3.6.1.4.1.164.3.3.3.3.1.1.7
prtHSRtsState
RTS state of the port.
Enumeration
Enumerated Values:
2off
3on
255notApplicable
 .1.3.6.1.4.1.164.3.3.3.3.1.1.8
prtHSInbandLoopback
This object indicates if Inband Loopback from the Network
should be enabled or disabled.
Enumerationr/w
Enumerated Values:
1notApplicable
2disabled
3enabled
 .1.3.6.1.4.1.164.3.3.3.3.1.1.9
prtHSInbandLoopPatternCfg
This object indicates if Inband Loop polynomial pattern
will be according to RDL Loop (the standard) or User Configurated
according to prtHSActivatePolyPattern and prtHSDeactivatePolyPattern.
Enumerationr/w
Enumerated Values:
1notApplicable
2rdlLoop
3userConfig
 .1.3.6.1.4.1.164.3.3.3.3.1.1.10
prtHSInbandLoopActPattern
This object is a binary string of up to 8 bits.
Though the syntax allows for any ASCII characters, for this object
only '0' or '1' characters are valid.
The string determines coefficients of the polynomial pattern
sent …
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.3.3.3.3.1.1.11
prtHSInbandLoopDeactPattern
This object is a binary string of up to 8 bits.
Though the syntax allows for any ASCII characters, for this object
only '0' or '1' characters are valid.
The string determines coefficients of the polynomial pattern
sent …
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.164.3.3.3.3.1.1.12
prtHSDCD
Selection of DCD line state in the user data channel.
linkOK - DCD line is ON only when active link is OK.
on - DCD continuously ON.
Enumerationr/w
Enumerated Values:
1notApplicable
2linkOK
3on
 .1.3.6.1.4.1.164.3.3.3.3.1.1.13
prtHSClkPolarity
This object indicates the clock polarity.
Enumerationr/w
Enumerated Values:
1notApplicable
2normal
3invert
 .1.3.6.1.4.1.164.3.3.3.3.1.1.14
prtHSInterfaceType
This object indicates the selected electrical interface type.
Enumerationr/w
Enumerated Values:
1notApplicable
2rs530
3v35
4rs422
5x21
6v24
7rs530a
8rs232
9rs449
 .1.3.6.1.4.1.164.3.3.3.3.1.1.15
prtHSUnframed
Unframed line for HS ports.
yes - means that all TSs must be transferred, including TS0.
In this case, prtHSRate must be r31x56eq1736Kbps OR
r31x64eq1984Kbps.
Enumerationr/w
Enumerated Values:
1notApplicable
2no
3yes
 .1.3.6.1.4.1.164.3.3.3.3.1.1.16

prtHSBertTable

table
.1.3.6.1.4.1.164.3.3.3.3.2 · 1 row entry · 4 columns
Open in standard view 
A table.
prtHSBertEntry entry .1.3.6.1.4.1.164.3.3.3.3.2.1
An entry in table.
Indexes
prtHSBertPrtIdx
Column Syntax OID
prtHSBertPrtIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside,
SP.
* The inside ports will be the HS cards …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.3.2.1.1
prtHSBertSlt
This attribute indicates a unique number to identify the slot where
the card is inserted in.
When the unit is stand-alone, this object is not applicable
and 255 will be used.
Enumeration
Enumerated Values:
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
255standAlone
 .1.3.6.1.4.1.164.3.3.3.3.2.1.2
prtHSBertCountClr
Setting this object (to on) initiate bert counter clear
operation.
Valid only when bert test is active on the specific port.
(Every time a new bert test starts, the counter is
automatically cleared; this command enabl…
Enumerationr/w
Enumerated Values:
2off
3on
 .1.3.6.1.4.1.164.3.3.3.3.2.1.3
prtHSBertTestResult
This object indicates the number of Bit Error Rate indicated
during the BERT test.
Active only when bert test is running on the selected port.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.3.2.1.4

prtSpCnfgTable

table
.1.3.6.1.4.1.164.3.3.3.4.1 · 1 row entry · 22 columns
Open in standard view 
A table.
prtSpCnfgEntry entry .1.3.6.1.4.1.164.3.3.3.4.1.1
All the entries at this table are identical(have the same value)
at all the configurations(1..255) except at the TmpCnfg.
- For products supporting more than one configuration, the write operation
into the Table Obje…
Indexes
prtSpCnfgIdx prtSpPrtIdx
Column Syntax OID
prtSpCnfgIdx
This attribute indicates the Idx of the Cnfg(1..255) being
accessed.
Idx of 255 relates to the TmpCnfg.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.3.3.4.1.1.1
prtSpPrtIdx
This attribute indicates a unique port number of the SPor DP port.
For DXC, it is the port in the active DCL card:
- SP = 1
- NP ; DP = 2

For Kilomux, the port index is calculated as follows:
1…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.4.1.1.2
prtSpUsage
This attribute indicates what is the usage of the port.
Enumerationr/w
Enumerated Values:
1unknown
2noUse
3nmsSlip
4nmsPpp
5muxSlip
6muxPpp
7terminal
8dialOut
 .1.3.6.1.4.1.164.3.3.3.4.1.1.3
prtSpRate
This attribute indicates the operation rate (speed) of the port.
auto - automatic rate selection, by the agent.
Enumerationr/w
Enumerated Values:
1auto
2s300bps
3s1200bps
4s2400bps
5s4800bps
6s9600bps
7s19200bps
8s38400bps
9s57600bps
10s115200bps
 .1.3.6.1.4.1.164.3.3.3.4.1.1.4
prtSpDataBits
This attribute indicates the number of data bits in async
frame
Enumerationr/w
Enumerated Values:
1dataBits7
2dataBits8
 .1.3.6.1.4.1.164.3.3.3.4.1.1.5
prtSpParity
This attribute indicates the parity mode in async frame
Enumerationr/w
Enumerated Values:
1none
2odd
3even
 .1.3.6.1.4.1.164.3.3.3.4.1.1.6
prtSpCallOutMode
This attribute indicates the call-out mode.
For DXC - this object is applicable only for the DP port (2).
Enumerationr/w
Enumerated Values:
1notApplicable
2none
3all
4major
 .1.3.6.1.4.1.164.3.3.3.4.1.1.7
prtSpInterface
This attribute indicates the supervisory port interface.
dce - the DACS appears as a DCE for the port.
dte - the DACS operates as a DTE, for connection via modem,
for the port.
Enumerationr/w
Enumerated Values:
1dce
2dte
 .1.3.6.1.4.1.164.3.3.3.4.1.1.8
prtSpCTS
CTS line state. This object is applicable only for
port (1) = SP
Enumerationr/w
Enumerated Values:
1notApplicable
2on
3rts
 .1.3.6.1.4.1.164.3.3.3.4.1.1.9
prtSpDcdDelay
DCD delay in msec.
d10 = delay of 10msec.
This object is applicable only for port (1) = SP
Enumerationr/w
Enumerated Values:
1notApplicable
2d0
3d10
4d50
5d100
6d200
7d300
 .1.3.6.1.4.1.164.3.3.3.4.1.1.10
prtSpDsr
DSR line state. This object is applicable only for
port (1) = SP
Enumerationr/w
Enumerated Values:
1notApplicable
2on
3dtr
 .1.3.6.1.4.1.164.3.3.3.4.1.1.11
prtSpNoOfRetries
For DXC - this object is applicable only for port (2) = DP.
The number of dialing retries requested.
Default = 0
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.164.3.3.3.4.1.1.12
prtSpWaitForConnect
For DXC - this object is applicable only for port (2) = DP.
Waiting time for connect, in seconds.
Default = 30 sec.
Enumerationr/w
Enumerated Values:
1notApplicable
2t30sec
3t45sec
4t60sec
 .1.3.6.1.4.1.164.3.3.3.4.1.1.13
prtSpDialMode
For DXC - this object is applicable only for port (2) = DP.
Dialing mode.
Default=tone
Enumerationr/w
Enumerated Values:
1notApplicable
2tone
3pulse
 .1.3.6.1.4.1.164.3.3.3.4.1.1.14
prtSpAltNumMode
For DXC - this object is applicable only for port (2) = DP.
It determines wether to use the alternate number or not.
Default = no.
Enumerationr/w
Enumerated Values:
2no
3yes
 .1.3.6.1.4.1.164.3.3.3.4.1.1.15
prtSpPrimaryNum
For DXC - this object is applicable only for port (2) = DP.
It is the Primary dialing number.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.164.3.3.3.4.1.1.16
prtSpAltNum
For DXC - this object is applicable only for port (2) = DP.
It is the Alternate dialing number. This number
is applicable only if prtSpAltNumMode is 'yes'.
OctetStringr/w
Constraints:
range: 0-20
 .1.3.6.1.4.1.164.3.3.3.4.1.1.17
prtSpRoutProtocol
This attribute indicates the routing protocol of the port.
notApplicable - for DP.
Enumerationr/w
Enumerated Values:
1notApplicable
2none
3proprietary
4rip2
 .1.3.6.1.4.1.164.3.3.3.4.1.1.18
prtSpCmd
SP Command.
For LRS this parameter will be used for a Modem Command.
Upon NMS's Get operation for devices that this parameter
is notApplicable, agent will send NULL string.
OctetStringr/w
Constraints:
range: 20-20
 .1.3.6.1.4.1.164.3.3.3.4.1.1.19
prtSpActCallOut
This object indicates when to Activate Call-Out.
It is used by FCD-T1/E1.
always - to activate call-out always.
linkFail - to activate call-out only when Link of Inband Management fails.
Enumerationr/w
Enumerated Values:
1notApplicable
2always
3linkFail
 .1.3.6.1.4.1.164.3.3.3.4.1.1.20
prtSpAlrRelayMode
This attribute indicates the Alarm Relay Mode.
notApplicable - for DP.
Enumerationr/w
Enumerated Values:
1notApplicable
2normal
3invert
 .1.3.6.1.4.1.164.3.3.3.4.1.1.21
prtSpStopBits
This attribute indicates number of stop bits in an async frame.
Enumerationr/w
Enumerated Values:
1notApplicable
2stopBits1
3stopBits1dot5
4stopBits2
 .1.3.6.1.4.1.164.3.3.3.4.1.1.22

prtDimCnfgTable

table
.1.3.6.1.4.1.164.3.3.3.5.1 · 1 row entry · 8 columns
Open in standard view 
A table.
prtDimCnfgEntry entry .1.3.6.1.4.1.164.3.3.3.5.1.1
The write operation into the Table Objects is valid only
for the TmpCnfg entry (prtDimCnfgIdx=255).
Indexes
prtDimCnfgIdx prtDimIdx
Column Syntax OID
prtDimCnfgIdx
This attribute indicates the Idx of the Cnfg(1..255) being
accessed.
Idx of 255 relates to the TmpCnfg.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.3.3.5.1.1.1
prtDimIdx
This attribute indicates a unique port number of the
DIM card.
The convention used for DXC:
(IO slot number+10)*10 + 1
Example: port1 of IO slot 11 will be: 211 .
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.5.1.1.2
prtDimTxMode
Tx mode.
regularTx - the links are connected to a similar outfit on
the other side. In this mode, if a link fails,
the transmitted bandwidth is decreased
accordingly.
broadcast - t…
Enumerationr/w
Enumerated Values:
2regularTx
3broadcast
 .1.3.6.1.4.1.164.3.3.3.5.1.1.3
prtDimPolarity
Polarity.
Enumerationr/w
Enumerated Values:
2normalClk
3inverted
 .1.3.6.1.4.1.164.3.3.3.5.1.1.4
prtDimClkMode
Clock Mode.
smooth - a clock that is not 'pulsed'(has no 'gaps'). In this mode
the DXC does NOT receive back the clock signal.
extSmooth - same as 'smooth' but in this mode, the DXC receives back
t…
Enumerationr/w
Enumerated Values:
2extDce
3dce
4smooth
5extSmooth
 .1.3.6.1.4.1.164.3.3.3.5.1.1.5
prtDimMaxDelay
Max Delay permitted between the links, in msec.
Enumerationr/w
Enumerated Values:
2t16msec
3t64msec
 .1.3.6.1.4.1.164.3.3.3.5.1.1.6
prtDimMng
Use of DIM port for management.
disabled - no management on DIM
ts1 - 1 bit of TS1 is used for management.
Enumerationr/w
Enumerated Values:
2disabled
3ts1
4dedicatedFr
 .1.3.6.1.4.1.164.3.3.3.5.1.1.7
prtDimMngRoutProt
Mng Routing Protocol of the port.
none - when prtDimMng is 'disabled'.
Enumerationr/w
Enumerated Values:
1notApplicable
2none
3proprietary
 .1.3.6.1.4.1.164.3.3.3.5.1.1.8

prtDimDestTable

table
.1.3.6.1.4.1.164.3.3.3.5.2 · 1 row entry · 5 columns
Open in standard view 
A table.
prtDimDestEntry entry .1.3.6.1.4.1.164.3.3.3.5.2.1
The write operation is valid only for the TmpCnfg entry
(prtDimDestCnfgIdx=255).
Indexes
prtDestCnfgIdx prtDestDimIdx prtDestIdx
Column Syntax OID
prtDestCnfgIdx
This attribute indicates the Idx of the Cnfg(1..255) being
accessed.
Idx of 255 relates to the TmpCnfg.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.3.3.5.2.1.1
prtDestDimIdx
This attribute indicates a unique port number of the
DIM card.
The convention used for DXC:
(IO slot number+10) & 1
Example: port1 of IO slot 11 will be: 211 .
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.5.2.1.2
prtDestIdx
This attribute indicates a destination number of the
DIM card.
Integer32
Constraints:
range: 1-8
 .1.3.6.1.4.1.164.3.3.3.5.2.1.3
prtDest
Destination port,(of a T1/E1 port), that is connected to the
DIM card, for the specified Destination number.
0 = No destination port.
Else:
For external ports:
(IO Slot+10) & 1 for port 1
(IO Slot+10) & 3 for p…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.5.2.1.4
prtDestConnect
Connection Status of the specified destination number.
For a specified destination port, it depends both on the
status of the port and on the status of the far-end port.
Since this is a RO object, same value will be re…
Enumeration
Enumerated Values:
2no
3yes
 .1.3.6.1.4.1.164.3.3.3.5.2.1.5

prtICnfgTable

table
.1.3.6.1.4.1.164.3.3.3.6.1 · 1 row entry · 4 columns
Open in standard view 
A table.
prtICnfgEntry entry .1.3.6.1.4.1.164.3.3.3.6.1.1
An entry in table.
Indexes
prtICnfgIdx prtIIdx
Column Syntax OID
prtICnfgIdx
This attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.3.3.6.1.1.1
prtIIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside,
SP.
* The ISDN B1, B2, D channels will be in…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.6.1.1.2
prtIRate
This object indicates the port rate in bits.
Each TS contains 8 bits. Thus, 1 bit is equivalent to 8Kbps
rate.
Enumerationr/w
Enumerated Values:
1notApplicable
2nc
3r2bit
4r4bit
5r8bit
 .1.3.6.1.4.1.164.3.3.3.6.1.1.3
prtIConnect
D channel connection.
no - disconnected
yes - connected.
Enumerationr/w
Enumerated Values:
1notApplicable
2no
3yes
 .1.3.6.1.4.1.164.3.3.3.6.1.1.4

prtHdslTable

table
.1.3.6.1.4.1.164.3.3.3.7.1 · 1 row entry · 7 columns
Open in standard view 
HDSL port table.
prtHdslEntry entry .1.3.6.1.4.1.164.3.3.3.7.1.1
An entry in table.
Indexes
prtHdslIdx
Column Syntax OID
prtHdslIdx
This attribute indicates a unique number to identify a port.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside.
* The HDSL ports will be external.
For port …
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.7.1.1.1
prtHdslMode
This object indicates the HDSL mode.
Enumerationr/w
Enumerated Values:
1notApplicable
2central
3remote
 .1.3.6.1.4.1.164.3.3.3.7.1.1.2
prtHdslRptrType
The Repeater between Near and Far modem.
none - no repeater exists between the modems
hrpt - HRPT repeater exists between the modems.
Enumeration
Enumerated Values:
1notApplicable
2none
3hrpt
 .1.3.6.1.4.1.164.3.3.3.7.1.1.3
prtHdslMaxRate
Maximum Rate of the xDSL Line, in Kbps units.
This object can be Set only for a Central unit.
Enumerationr/w
Enumerated Values:
1notApplicable
2r192
3r256
4r320
5r384
6r448
7r512
8r576
9r640
10r768
11r896
12r1024
13r1152
14r1280
15r1536
16r1920
17r2048
 .1.3.6.1.4.1.164.3.3.3.7.1.1.4
prtHdslLinkType
The Link Type.
msdsl2w - MSDSL 2 Wire
hdsl2w - HDSL 2 Wire
hdsl4w - HDSL 4 Wire
gDsl - G.DSL
Enumeration
Enumerated Values:
1notApplicable
2msdsl2w
3hdsl2w
4hdsl4w
5gDsl
 .1.3.6.1.4.1.164.3.3.3.7.1.1.5
prtHdslCompSwVer
This object indicates the Software Version of the
component (Piggyback card) supporting this interface.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.3.7.1.1.6
prtHdslCompHwVer
This object indicates the Hardware Version of the
component (Piggyback card) supporting this interface.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.3.7.1.1.7

prtT3E3CnfgTable

table
.1.3.6.1.4.1.164.3.3.3.8.1 · 1 row entry · 9 columns
Open in standard view 
T3/E3 port configuration table.
prtT3E3CnfgEntry entry .1.3.6.1.4.1.164.3.3.3.8.1.1
An entry in the T3/E3 port configuration table.
Indexes
prtT3E3CnfgIdx prtT3E3PrtIdx
Column Syntax OID
prtT3E3CnfgIdx
This attribute indicates the Idx of the Config being accessed.
Idx of 255 relates to the Temporary (Scratch) Config.
For DXC, write operations can be performed only on the Temp Config.
For products that do not support c…
Integer32
Constraints:
range: 1-255
 .1.3.6.1.4.1.164.3.3.3.8.1.1.1
prtT3E3PrtIdx
This attribute indicates a unique port number.
For DXC:
The same numbering as for prtGenPrtIdx.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside.
* The ext…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.3.8.1.1.2
prtT3E3Slt
This attribute indicates a unique number to identify the slot where
the card is inserted in.
When the unit is stand-alone, this object is not applicable
and 255 will be used.
Enumeration
Enumerated Values:
3clA
4clB
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
255standAlone
 .1.3.6.1.4.1.164.3.3.3.8.1.1.3
prtT3E3LineLength
This object is the length of the ds3 line in feet.
It provides information for line build out circuitry if it exists
and can use this object to adjust the line build out.
len0p450ft = 0 - 450 feet
len451p900ft =…
Enumerationr/w
Enumerated Values:
1notApplicable
2len0p450ft
3len451p900ft
 .1.3.6.1.4.1.164.3.3.3.8.1.1.4
prtT3E3InbandMng
A unique number to identify the Frame Type over the link.
For Optimux-T3: only values (4), (7) are supported.
Enumerationr/w
Enumerated Values:
1notApplicable
2off
3cBit
4cBitTxRxMng
5cBitTx
6cBitTxMng
7m13
8cdpv
9nationalBit
 .1.3.6.1.4.1.164.3.3.3.8.1.1.5
prtT3E3AisFrame
This object is applicable only for Optimux-T3.
It allows user to select whether the AIS sent will be framed or unframed.
Enumerationr/w
Enumerated Values:
1notApplicable
2unframed
3framed
 .1.3.6.1.4.1.164.3.3.3.8.1.1.6
prtT3E3TxClockSource
Tx Clock Source.
Enumerationr/w
Enumerated Values:
1external
2internal
255notApplicable
 .1.3.6.1.4.1.164.3.3.3.8.1.1.7
prtT3E3RoutProt
Routing Protocol of the port.
This object is applicable only for T3 ports.
Enumerationr/w
Enumerated Values:
1notApplicable
2none
3proprietary
4rip2
 .1.3.6.1.4.1.164.3.3.3.8.1.1.8
prtT3E3AisTransmit
Indicates if AIS signal will be transmitted over the tributary E3/DS3
upon failure.
Enumerationr/w
Enumerated Values:
1notApplicable
2disable
3enable
 .1.3.6.1.4.1.164.3.3.3.8.1.1.9

cmprTable

table
.1.3.6.1.4.1.164.3.3.4.1 · 1 row entry · 6 columns
Open in standard view 
A table.
cmprEntry entry .1.3.6.1.4.1.164.3.3.4.1.1
An entry in table.
Indexes
cmprTypeIdx cmprCnfgIdx cmprVersion cmprSltIdx cmprPrtIdx
Column Syntax OID
cmprTypeIdx
This object indicates the Type of the Compressed
data referred (which table, which level, etc).
The type is a code according to a convention between
agent and NMS.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.4.1.1.1
cmprCnfgIdx
This object indicates the configuration number the
Compressed information relates to.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.4.1.1.2
cmprVersion
This object indicates the version of the internal format of
the Compressed data (the version of the convention used).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.4.1.1.3
cmprSltIdx
This attribute indicates a unique number of the slot
position where the card is inserted.
When the unit is stand-alone or this object is not applicable,
255 will be used.
Enumeration
Enumerated Values:
1psA
2psB
3clA
4clB
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
255notApplicable
 .1.3.6.1.4.1.164.3.3.4.1.1.4
cmprPrtIdx
This object indicates a unique identifier of the port,
the compressed information relates to.
For DXC - according to the order in the card of cmprSltIdx:
- first two digits will be: (IO slot number+10)
- last one/two di…
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.4.1.1.5
cmprObj
This object is the compressed information itself,
according to a predefined format, both agent and NMS agreed
about.
OctetStringr/w .1.3.6.1.4.1.164.3.3.4.1.1.6

mapLinkTable

table
.1.3.6.1.4.1.164.3.3.4.2 · 1 row entry · 4 columns
Open in standard view 
A table.
mapLinkEntry entry .1.3.6.1.4.1.164.3.3.4.2.1
An entry in table.
Indexes
mapLinkIdx
Column Syntax OID
mapLinkIdx
A unique identifier of the link
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.4.2.1.1
mapLinkSlotIdx
This attribute indicates a unique slot position where
the module is inserted.
Enumerationr/w
Enumerated Values:
5io1
6io2
7io3
8io4
9io5
10io6
11io7
12io8
13io9
14io10
15io11
16io12
17io13
18io14
19io15
255standAlone
 .1.3.6.1.4.1.164.3.3.4.2.1.2
mapLinkPortIdx
This attribute indicates a unique port number.
The valid port number depends on the IO slot no., the
installed card type and the port type: outside, inside,
SP.
In the DXC :
- first two digits will be: (IO slot numb…
SNMPv2-SMIInteger32r/w
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.4.2.1.3
mapLinkState
This attribute indicates the status of the link between
the two muxes
Enumeration
Enumerated Values:
1unknown
2down
3up
 .1.3.6.1.4.1.164.3.3.4.2.1.4

alrGenTable

table
.1.3.6.1.4.1.164.3.3.4.3 · 1 row entry · 7 columns
Open in standard view 
A table.
alrGenEntry entry .1.3.6.1.4.1.164.3.3.4.3.1
An entry in table.
Indexes
alrGenCode
Column Syntax OID
alrGenCode
This object is a unique code number, identifying
a certain alarm.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.164.3.3.4.3.1.1
alrGenDescription
This entry is a unique text description, of the alarm
corresponding to the specified code.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.4.3.1.2
alrGenLevel
Alarm level.
Enumeration
Enumerated Values:
1notApplicable
2system
3card
4port
 .1.3.6.1.4.1.164.3.3.4.3.1.3
alrGenSlotType
Slot type that the alarm is relevant to.
clAndIo - an alarm that is relevant for both CL and IO slots.
Enumeration
Enumerated Values:
1notApplicable
2ps
3cl
4io
5clAndIo
 .1.3.6.1.4.1.164.3.3.4.3.1.4
alrGenSeverity
This object enables the user to select a severity for each alarm.
The severity is set per alarm code (same for all slots/ports
using this code).
Enumerationr/w
Enumerated Values:
1notApplicable
3event
4minor
5major
6warning
7critical
 .1.3.6.1.4.1.164.3.3.4.3.1.5
alrGenDebounce
Debounce time for each alarm code, in seconds.
The meaning is, that an alarm will be 'declared' as ON (or OFF), only
after it was actually ON/OFF the Debouncing time selected by user.
0 = default debounce selection (ea…
Integer32r/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.164.3.3.4.3.1.6
alrGenDefSeverity
This object reports the default severity of each alarm.
User can change the severity of the alarms defined by
this default via the alrGenSeverity object.
Enumeration
Enumerated Values:
1notApplicable
3event
4minor
5major
6warning
7critical
 .1.3.6.1.4.1.164.3.3.4.3.1.7