mdlSHwStatus

RAD-Dacs-MIB · .1.3.6.1.4.1.164.3.3.2.1.1.1.8

MIB view Table view

Object

column Enumeration

This attribute will be fail(2) when a HW FAIL exists
on this module (discovered by periodic self test); 
otherwise the value will be ok(3).

Context

MIB: RAD-Dacs-MIB
OID: .1.3.6.1.4.1.164.3.3.2.1.1.1.8
Type: column
Access: readonly
Status: current
Parent: mdlSEntry
Table: mdlSTable
Siblings: 17

Syntax

Enumeration

Values & Constraints

Enumerated Values

`2`	fail
`3`	ok

Related Objects

Sibling Objects

Object	Type	Syntax	OID
mdlSSltIdx A unique number to identify a slot position in the DACS. The Kilomux should use enumerated values starting with kmx. For IPmux100 use values 1-13, 20.	column	RAD-TCSlotType	`.1.3.6.1.4.1.164.3.3.2.1.1.1.1`
mdlSAlrClearCmd Setting this attribute to ON, will enforce a clear operation on the card level alarms . Upon completion, the value will automatically change to off(2).	column	Enumeration	`.1.3.6.1.4.1.164.3.3.2.1.1.1.10`
mdlSAlrClearAllCmd Setting this attribute to ON, will enforce a clear operation on card and port level alarms . Upon completion, the value will automatically change to off(2).	column	Enumeration	`.1.3.6.1.4.1.164.3.3.2.1.1.1.11`
mdlSAlrMaskAll on(3) - will cause masking of all the card level alarms. These alarms will not be sent to NMS and will not be taken into account for Alarms Status. off(2) - will unmask all card…	column	Enumeration	`.1.3.6.1.4.1.164.3.3.2.1.1.1.12`
mdlSCmd General object for any special command at card level. 0=NotApplicable, for cards that don't support this object. For KML.10(ISDN) card of KM-2100, the object will …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.164.3.3.2.1.1.1.13`
mdlSReset Reset action to be performed on the module.	column	Enumeration	`.1.3.6.1.4.1.164.3.3.2.1.1.1.14`
mdlSRebuildFrame Applicable only for KiloMux Main Link cards only. '2' = off, this will be always the Get value. '3' = on, this is the Set command used to Rebuild the Frame. Upon completing the …	column	Enumeration	`.1.3.6.1.4.1.164.3.3.2.1.1.1.15`
mdlSBackupSwVer This attribute indicates the Backup Software version of the card installed in the specific slot position.	column	OctetString	`.1.3.6.1.4.1.164.3.3.2.1.1.1.16`
mdlSSecondaryBackupSwVer This attribute indicates the Secondary Backup Software version of the card installed in the specific slot position.	column	OctetString	`.1.3.6.1.4.1.164.3.3.2.1.1.1.17`
mdlSPiggybackVer This attribute indicates the Piggyback version of the card installed in the specific slot position.	column	OctetString	`.1.3.6.1.4.1.164.3.3.2.1.1.1.18`
mdlSCardType This attribute indicates the type of the card installed in the specific slot position. Only PS's are possible in the PS slots. Only CL's are possible in the CL slots. Only IO mod…	column	RAD-TCCardType	`.1.3.6.1.4.1.164.3.3.2.1.1.1.2`
mdlSHwVer This attribute indicates the Hardware version of the card installed in the specific slot position.	column	OctetString	`.1.3.6.1.4.1.164.3.3.2.1.1.1.3`
mdlSSwVer This attribute indicates the Software version of the card installed in the specific slot position.	column	OctetString	`.1.3.6.1.4.1.164.3.3.2.1.1.1.4`
mdlSAlarmStatus Indicates the current alarm state only for card level. This object will be set to: - critical(7): when there is at least one active (ON) critical alarm . - major (3…	column	Enumeration	`.1.3.6.1.4.1.164.3.3.2.1.1.1.5`
mdlSAlarmStatusAll Indicates the current card alarm state including the lower level: card, port. This object will be set to: - critical(7): when there is at least one active (ON) critical …	column	Enumeration	`.1.3.6.1.4.1.164.3.3.2.1.1.1.6`
mdlSTestStatus This attribute will be on(3) when there is at least one test running on a port of the module; otherwise the value will be off(2).	column	Enumeration	`.1.3.6.1.4.1.164.3.3.2.1.1.1.7`
mdlSActivity notApplicable - when the slot is empty (no module) offline(1) - when the module is not active (redundant) online (2) - when the module is active .	column	Enumeration	`.1.3.6.1.4.1.164.3.3.2.1.1.1.9`