prtSpAltNumMode

RAD-Dacs-MIB · .1.3.6.1.4.1.164.3.3.3.4.1.1.15
MIB view Table view

Object

column r/w Enumeration 
For DXC - this object is applicable only for port (2) = DP.
It determines wether to use the alternate number or not.
Default = no.

Context

MIB
RAD-Dacs-MIB
OID
.1.3.6.1.4.1.164.3.3.3.4.1.1.15
Type
column
Access
readwrite
Status
current
Parent
prtSpCnfgEntry
Table
prtSpCnfgTable
Siblings
21

Syntax

Enumeration

Values & Constraints

Enumerated Values
2no
3yes

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
prtSpCnfgIdx
This attribute indicates the Idx of the Cnfg(1..255) being accessed. Idx of 255 relates to the TmpCnfg.
columnInteger32.1.3.6.1.4.1.164.3.3.3.4.1.1.1
prtSpDcdDelay
DCD delay in msec. d10 = delay of 10msec. This object is applicable only for port (1) = SP
columnEnumeration.1.3.6.1.4.1.164.3.3.3.4.1.1.10
prtSpDsr
DSR line state. This object is applicable only for port (1) = SP
columnEnumeration.1.3.6.1.4.1.164.3.3.3.4.1.1.11
prtSpNoOfRetries
For DXC - this object is applicable only for port (2) = DP. The number of dialing retries requested. Default = 0
columnInteger32.1.3.6.1.4.1.164.3.3.3.4.1.1.12
prtSpWaitForConnect
For DXC - this object is applicable only for port (2) = DP. Waiting time for connect, in seconds. Default = 30 sec.
columnEnumeration.1.3.6.1.4.1.164.3.3.3.4.1.1.13
prtSpDialMode
For DXC - this object is applicable only for port (2) = DP. Dialing mode. Default=tone
columnEnumeration.1.3.6.1.4.1.164.3.3.3.4.1.1.14
prtSpPrimaryNum
For DXC - this object is applicable only for port (2) = DP. It is the Primary dialing number.
columnOctetString.1.3.6.1.4.1.164.3.3.3.4.1.1.16
prtSpAltNum
For DXC - this object is applicable only for port (2) = DP. It is the Alternate dialing number. This number is applicable only if prtSpAltNumMode is 'yes'.
columnOctetString.1.3.6.1.4.1.164.3.3.3.4.1.1.17
prtSpRoutProtocol
This attribute indicates the routing protocol of the port. notApplicable - for DP.
columnEnumeration.1.3.6.1.4.1.164.3.3.3.4.1.1.18
prtSpCmd
SP Command. For LRS this parameter will be used for a Modem Command. Upon NMS's Get operation for devices that this parameter is notApplicable, agent will send NULL string.
columnOctetString.1.3.6.1.4.1.164.3.3.3.4.1.1.19
prtSpPrtIdx
This attribute indicates a unique port number of the SPor DP port. For DXC, it is the port in the active DCL card: - SP = 1 - NP ; DP = 2 For Kilomux, th…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.164.3.3.3.4.1.1.2
prtSpActCallOut
This object indicates when to Activate Call-Out. It is used by FCD-T1/E1. always - to activate call-out always. linkFail - to activate call-out only when Link of Inband Management…
columnEnumeration.1.3.6.1.4.1.164.3.3.3.4.1.1.20
prtSpAlrRelayMode
This attribute indicates the Alarm Relay Mode. notApplicable - for DP.
columnEnumeration.1.3.6.1.4.1.164.3.3.3.4.1.1.21
prtSpStopBits
This attribute indicates number of stop bits in an async frame.
columnEnumeration.1.3.6.1.4.1.164.3.3.3.4.1.1.22
prtSpUsage
This attribute indicates what is the usage of the port.
columnEnumeration.1.3.6.1.4.1.164.3.3.3.4.1.1.3
prtSpRate
This attribute indicates the operation rate (speed) of the port. auto - automatic rate selection, by the agent.
columnEnumeration.1.3.6.1.4.1.164.3.3.3.4.1.1.4
prtSpDataBits
This attribute indicates the number of data bits in async frame
columnEnumeration.1.3.6.1.4.1.164.3.3.3.4.1.1.5
prtSpParity
This attribute indicates the parity mode in async frame
columnEnumeration.1.3.6.1.4.1.164.3.3.3.4.1.1.6
prtSpCallOutMode
This attribute indicates the call-out mode. For DXC - this object is applicable only for the DP port (2).
columnEnumeration.1.3.6.1.4.1.164.3.3.3.4.1.1.7
prtSpInterface
This attribute indicates the supervisory port interface. dce - the DACS appears as a DCE for the port. dte - the DACS operates as a DTE, for connection via modem, for the po…
columnEnumeration.1.3.6.1.4.1.164.3.3.3.4.1.1.8
prtSpCTS
CTS line state. This object is applicable only for port (1) = SP
columnEnumeration.1.3.6.1.4.1.164.3.3.3.4.1.1.9