mdlCEntPhysicalIndex
RAD-Dacs-MIB ·
.1.3.6.1.4.1.164.3.3.2.1.2.1.11
Object
column
ENTITY-MIBPhysicalIndexOrZero
The object contains index of the related entPhysicalEntry of the ENTITY-MIB, see RFC4133. It points the relevant card and not the card slot. The agent should build this index accordign to the rules that are defined by the inventory.doc document. Zero value means 'no entry defined', i.e. the card is not detected in its slot.
Context
- MIB
- RAD-Dacs-MIB
- OID
.1.3.6.1.4.1.164.3.3.2.1.2.1.11- Type
- column
- Access
- readonly
- Status
- current
- Parent
- mdlCEntry
- Table
- mdlCTable
- Siblings
- 17
Syntax
ENTITY-MIBPhysicalIndexOrZero
- Source
- ENTITY-MIBPhysicalIndexOrZero
- Base type
Integer32
Values & Constraints
Type Constraints
range: 0..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| mdlCConfigIdx This object indicates the Configuration number (1..255)
referred.
Value of 255 specifies the TmpCnfg (Scratch). | column | Integer32 | .1.3.6.1.4.1.164.3.3.2.1.2.1.1 |
| mdlCDetailedStatus The module current status.
When moduleOperStatus is down(2), but not as a result of
setting the moduleAdminStatus to down(2), this object contains
the failure reaso… | column | Bits | .1.3.6.1.4.1.164.3.3.2.1.2.1.10 |
| mdlCReset Reset action to be performed on the module.
Agent should set mdlCReset to off (2) during initialization. | column | Enumeration | .1.3.6.1.4.1.164.3.3.2.1.2.1.12 |
| mdlCConfigMismatchReason This object details the card configuration mismatch
in case the object mdlCDetailedStatus is equal to configurationMismatch(7) | column | Enumeration | .1.3.6.1.4.1.164.3.3.2.1.2.1.13 |
| mdlCIpAddressType The object defines type of the mdlCIpAddress as defined
in the InetAddress MIB: IPv4 or IPv6. | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.4.1.164.3.3.2.1.2.1.14 |
| mdlCIpAddress The object defines card IP address that will be associated
with the card loopback IP interface. | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.4.1.164.3.3.2.1.2.1.15 |
| mdlCHardwareFailureReason | column | Enumeration | .1.3.6.1.4.1.164.3.3.2.1.2.1.16 |
| mdlCSlotIdx This object indicates a unique number of the slot position
in which the module is inserted.
The Kilomux should use enumerated values starting with kmx. | column | RAD-TCSlotType | .1.3.6.1.4.1.164.3.3.2.1.2.1.2 |
| mdlCFanControl The desired state of the fan.
Module fan control shall manage all fans on the module, if there are more than one.
When mdlCFanControl is 'up', all module's fans mus… | column | Enumeration | .1.3.6.1.4.1.164.3.3.2.1.2.1.22 |
| mdlCFanOperStatus The current operational state of the module's fans. Provides the
aggregated state of all fans, if there are more than one on the module.
… | column | Enumeration | .1.3.6.1.4.1.164.3.3.2.1.2.1.23 |
| mdlCProgCardType This object indicates the card type assigned to the specific
slot in the common configuration.
This object is identical for all the configurations (1..255).
Only the TmpCnf(255) … | column | RAD-TCCardType | .1.3.6.1.4.1.164.3.3.2.1.2.1.3 |
| mdlCNoOfExtPrt Number of external ports in the programmed module of
the specific slot position | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.2.1.2.1.4 |
| mdlCNoOfIntPrt Number of internal ports in the programmed module of
the specific slot position. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.2.1.2.1.5 |
| mdlCParam General configuration object at card level (per configuration).
NotApplicable=0, for cards that don't support this object.
For D8U and D16U cards of DXC, the objec… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.164.3.3.2.1.2.1.6 |
| mdlCAdminStatus The desired state of the module.
Module adminStatus should be managed for all modules in the shelf.
When adminStatus is 'down', this module is not operational i.e.
… | column | Enumeration | .1.3.6.1.4.1.164.3.3.2.1.2.1.7 |
| mdlCActualCardType This object defines actual card type. | column | RAD-TCCardType | .1.3.6.1.4.1.164.3.3.2.1.2.1.8 |
| mdlCOperStatus The current operational state of the module.
up
The physical module agrees with the pre-provisioned card type,
and the configuration of the module succeeded.
… | column | Enumeration | .1.3.6.1.4.1.164.3.3.2.1.2.1.9 |