PROXIM-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
62
Rows
62
Columns
592

wirelessIfPropertiesTable

table
.1.3.6.1.4.1.841.1.1.1.1.1.1 · 1 row entry · 25 columns
Open in standard view 
This table contains information on the properties and  
capabilities of the wireless interface(s) present in the device.
wirelessIfPropertiesTableEntry entry .1.3.6.1.4.1.841.1.1.1.1.1.1.1
This parameter represents the entry in the wireless interface
properties table.
Indexes
No indexes recorded
Column Syntax OID
wirelessIfPropertiesTableIndex
This parameter represents a unique value for each Wireless interface
in the system and is used as index to this table.
Unsigned32
Constraints:
range: 0-18
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.1
wirelessIfPropertiesRadioStatus
This parameter is used to provide the status of the Wireless Radio
interface. Select
(1) to enable the wireless interface and
(2) to disable the wireless interface.
Enumerationr/w
Constraints:
range: 0-255
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.2
wirelessIfOperationalMode
This parameter is used to set the wireless NIC Operational mode.
Depending on the wireless NIC in the device different wireless
operational modes can be configured. The object wirelessIfSupportedOperationalMode
…
OctetStringr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.3
wirelessIfSupportedOperationalMode
This parameter is used to set the wireless supported Operational mode.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.4
wirelessIfCurrentChannelBandwidth
This parameter represents the current bandwidth that Wireless is
currently operating on. It is represented in MHz
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.5
wirelessIfSupportedChannelBandwidth
This parameter represents the channel bandwidths that a wireless can support.
SNMPv2-TCDisplayString
Constraints:
range: 1-2
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.6
wirelessIfAutoChannelSelection
This parameter is used to configure the auto channel selection for wireless
interface. Select
(1) to enable the auto channel selection and
(2) to disable the auto channel selection.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.7
wirelessIfCurrentOperatingChannel
This parameter represents the user configured channel that the radio is
configured to operate in.
Note: It is possible that the currently active channel is different.
To find the current active/operational chan…
SNMPv2-SMIUnsigned32r/w
Constraints:
range: 1-64
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.8
wirelessIfSupportedChannels
This parameter represents the channels that wireless can support.
OctetString
Constraints:
range: 1024-65535
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.9
wirelessIfAutoRateSelection
This parameter is used to configure the value for Auto Rate Selection for the
wireless interface. Select
(1) to enable the Auto Rate selection and
(2) to disable the Auto Rate selection.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.10
wirelessIfTransmittedRate
This parameter represents the number of rates transmitted for wireless.
Unsigned32r/w
Constraints:
range: 4096-4096
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.11
wirelessIfSupportedRate
This parameter represents the number of rates supported for wireless.
SNMPv2-TCDisplayString
Enumerated Values:
1upperExtensionChannel
2lowerExtensionChannel
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.12
wirelessIfVAPRTSThreshold
This parameter represents the maximum threshold for VAP RTS (Request To Send).
The maximum threshold can be configured up to 2346.
Unsigned32r/w
Enumerated Values:
1shortGI-400nSec
2fullGI-800nSec
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.13
wirelessIfVAPBeaconInterval
This parameter represents the time interval that a beacon takes for getting
transmitted for wireless VAP. By default, the value is set to 100 ms.
Unsigned32r/w
Enumerated Values:
1one
2two
3three
4four
5five
6six
7seven
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.14
wirelessIfTPC
This parameter represents the cell size that the transmitted power controls. It is
measured in dBm. Please check the wirelessIfActiveTPC for current active TPC.
Unsigned32r/w
Enumerated Values:
1one
2two
3three
4four
5five
6six
7seven
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.15
wirelessIfCellSize
This parameter represents the cell size of the wireless. By default, the cell size
is configured to large. Select
(1) for Small cell size,
(2) for Medium cell size and
(3) for Large cell size.
Enumerationr/w
Enumerated Values:
1single
2dual
3auto
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.16
wirelessIfDTIM
This parameter represents the delivery traffic indication map
period. This is the interval between the transmission of multicast
frames on the wireless inteface. It is expressed in the Beacon
messages. The recomme…
Unsigned32r/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.17
wirelessIfAntennaGain
This parameter is used to configure the antenna gain.
Unsigned32r/w
Constraints:
range: 1-64
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.18
wirelessIfCurrentActiveChannel
This parameter represents the current active channel that wireless radio is
operating on. It may be different from the configured channel represented by
wirelessIfCurrentOperatingChannel.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.19
wirelessIfSatelliteDensity
This parameter represents the density of the satellites for the BSU.
It configures the BSU to accomodate the satellites for the specified
range.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.1.1.1.1.20
wirelessIfMPOperationalMode
This parameter is used to set the wireless NIC Operational mode for Tsunami Multi
Point Products.
Enumerationr/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.21
wirelessIfChannelWaitTime
This parameter is used to configure the DFS channel wait time.
Unsigned32r/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.22
wirelessIfActiveTPC
This parameter shows the active cell size that the transmitted power controls. It is
measured in dBm
Unsigned32
Enumerated Values:
1ap
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.23
wirelessIfDfsNumSatWithRadarForFreqSwitch
This parameter represents the minimum number of satellites reporting RADAR for BSU to
switch to a new best channel/frequency. The default value is (0) that indicates BSU to never switch to a
new best channel/frequency…
Unsigned32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.841.1.1.1.1.1.1.1.24
wirelessIfDfsStatus
This parameter is used to configure the status of the DFS for SU. Configuring this parameter
for BSU will not affecte BSU Status.
1 to enable the DFS,
2 to disable the DFS.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.1.1.1.1.25

wirelessIf11nPropertiesTable

table
.1.3.6.1.4.1.841.1.1.1.1.1.2 · 1 row entry · 13 columns
Open in standard view 
This table holds the wireless11n configurations.
wirelessIf11nPropertiesTableEntry entry .1.3.6.1.4.1.841.1.1.1.1.1.2.1
This parameter represents the entry for wireless11n properties table.
Indexes
No indexes recorded
Column Syntax OID
wirelessIf11nPropertiesTableIndex
This parameter represents index to the wireless interface 11n
table and this represents the wireless radios.
Unsigned32
Constraints:
range: 1-32
 .1.3.6.1.4.1.841.1.1.1.1.1.2.1.1
wirelessIf11nPropertiesAMPDUStatus
This parameter is used define the AMPDU status for wireless 11n
interface. Select
1 to enable and
2 to disable the AMPDU status.
Enumerationr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.841.1.1.1.1.1.2.1.2
wirelessIf11nPropertiesAMPDUMaxNumFrames
This parameter represents the Agregated MAC Protocol Data Unit
(AMPDU) frames that are transmitted. It can be configured up to 64 frames.
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.1.1.2.1.3
wirelessIf11nPropertiesAMPDUMaxFrameSize
This parameter is used to configure the maximum AMPDU frame size
(in bytes) that can be transmitted.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.841.1.1.1.1.1.2.1.4
wirelessIf11nPropertiesAMSDUStatus
This parameter is used define the AMSDU status for wireless 11n
interface. Select
1 to enable and
2 to disable the AMSDU status.
Enumerationr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.841.1.1.1.1.1.2.1.5
wirelessIf11nPropertiesAMSDUMaxFrameSize
This parameter shows the maximum AMSDU frame size
(in bytes) that can be transmitted.
Unsigned32
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.1.1.2.1.6
wirelessIf11nPropertiesFrequencyExtension
This parameter is used to configure the frequency extension for
the wireless interface. Select
1 to configure the UpperExtensionChannel and
2 to configure the LowerExtensionChannel.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.1.1.2.1.7
wirelessIf11nPropertiesGuardInterval
This parameter is used to configure the guard interval for the
wireless interface. Select 1 for short guard interval as 400
nano seconds and 2 for full guard interval as 800 nano seconds.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.1.1.2.1.8
wirelessIf11nPropertiesTxAntennas
This parameter enables the transmission antennas. This is configured
as bit-mask.
Eg: 3 - 011 (binary value) - first and second antennas are enabled.
7 - 111 (binary value) - all three are enabled.
Enumerationr/w
Enumerated Values:
1enable
2disable
3delete
 .1.3.6.1.4.1.841.1.1.1.1.1.2.1.9
wirelessIf11nPropertiesRxAntennas
This parameter enables the receiving antennas. This is configured
as bit-mask.
Eg: 3 - 011 (binary value) - first and second antennas are enabled.
7 - 111 (binary value) - all three are enabled.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.1.1.2.1.10
wirelessIf11nPropertiesNumOfSpatialStreams
This parameter is used to select the number of spatial streams for 11n.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.1.1.2.1.11
wirelessIf11nPropertiesSupportedTxAntennas
This parameter shows the number of supported Tx antennas.
OctetString
Constraints:
range: 1-2
 .1.3.6.1.4.1.841.1.1.1.1.1.2.1.12
wirelessIf11nPropertiesSupportedRxAntennas
This parameter shows the number of supported Rx antennas.
OctetString .1.3.6.1.4.1.841.1.1.1.1.1.2.1.13

wirelessIfVAPTable

table
.1.3.6.1.4.1.841.1.1.1.1.1.3 · 1 row entry · 16 columns
Open in standard view 
This table holds the wireless VAP (virtual access point) configurations.
wirelessIfVAPTableEntry entry .1.3.6.1.4.1.841.1.1.1.1.1.3.1
This parameter represents the entry for the wireless VAP table.
Indexes
No indexes recorded
Column Syntax OID
wirelessIfVAPTableIndex
This parameter is used to configure the wireless VAP table. Select
1 represents Wifi0 (radio-0) and
2 represents Wifi1 (radio-1).
Unsigned32
Constraints:
range: 1-250
 .1.3.6.1.4.1.841.1.1.1.1.1.3.1.1
wirelessIfVAPTableSecIndex
This parameter represents the VAPs and used as secondary index to this
table.
Unsigned32
Constraints:
range: 350-3808
 .1.3.6.1.4.1.841.1.1.1.1.1.3.1.2
wirelessIfVAPType
This parameter is used to configure the type of VAP. Select
1 for AP.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.1.1.3.1.3
wirelessIfVAPSSID
This parameter is used to represent the wireless card SSID name
(wireless network name).
OctetStringr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.1.1.3.1.4
wirelessIfVAPBSSID
This parameter represents the MAC address for the VAP BSSID.
SNMPv2-TCMacAddress
Enumerated Values:
1enable
2disable
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.1.1.1.3.1.5
wirelessIfVAPBroadcastSSID
This parameter is used to configure the status of the broadcast
wireless VAP SSID. A single entry in the SSID table can be enabled
to broadcast SSID in beacon messages.
Select
1 to enable,
2 to disable
Enumerationr/w
Constraints:
range: 1-10
 .1.3.6.1.4.1.841.1.1.1.1.1.3.1.6
wirelessIfVAPFragmentationThreshold
This parameter is used to configure the fragmentation threshold
for the wireless VAP. By default, the value is set to 2346.
Unsigned32r/w
Constraints:
range: 0-10
 .1.3.6.1.4.1.841.1.1.1.1.1.3.1.7
wirelessIfVAPSecurityProfileName
This parameter allows you to configure the Security profile name
for Wireless VAP.
OctetStringr/w .1.3.6.1.4.1.841.1.1.1.1.1.3.1.8
wirelessIfVAPRadiusProfileName
This parameter allows you to configure the RADIUS profile name for
Wireless VAP.
OctetStringr/w .1.3.6.1.4.1.841.1.1.1.1.1.3.1.9
wirelessIfVAPVLANID
This parameter is used to represent the VLAN ID for the wireless VAP.
Select any value between 1 - 4094 to tag the VLAN ids and -1 to untag
the VLAN ids.
VlanIdr/w
Constraints:
range: 64-307200
Textual Convention: VlanId Integer32
Type Constraints:
range: -1..4094
 .1.3.6.1.4.1.841.1.1.1.1.1.3.1.10
wirelessIfVAPVLANPriority
This parameter is used to configure the VLAN priority for Wireless VAP.
By default the value is set to 0.
Unsigned32r/w
Constraints:
range: 64-307200
 .1.3.6.1.4.1.841.1.1.1.1.1.3.1.11
wirelessIfVAPQoSProfileName
This parameter is used to configure the profile name for the Wireless VAP QoS.
OctetStringr/w
Enumerated Values:
1policing
2shaping
 .1.3.6.1.4.1.841.1.1.1.1.1.3.1.12
wirelessIfVAPMACACLStatus
This parameter is used to enable or disable the MAC access control list.
Enumerationr/w
Enumerated Values:
1one
2two
3three
4four
5five
6six
7seven
8eight
 .1.3.6.1.4.1.841.1.1.1.1.1.3.1.13
wirelessIfVAPRadiusMACACLStatus
This parameter is used to enable or disable the MAC ACL for Radius Profiles
Enumerationr/w
Enumerated Values:
1one
2two
3three
4four
5five
6six
7seven
8eight
 .1.3.6.1.4.1.841.1.1.1.1.1.3.1.14
wirelessIfVAPRadiusAccStatus
This parameter is used to enable or disable the Radius Accounting Stats capture.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.1.1.3.1.15
wirelessIfVAPStatus
This parameter is used to configure the status of the VAP. Select
1 to enable the VAP,
2 to disable the VAP and
3 to delete the VAP.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.1.1.3.1.16

wirelessIfWORPTable

table
.1.3.6.1.4.1.841.1.1.1.1.1.4 · 1 row entry · 23 columns
Open in standard view 
This table holds the wireless WORP protocol configurations
wirelessIfWORPTableEntry entry .1.3.6.1.4.1.841.1.1.1.1.1.4.1
This object represents the entry for the wireless WORP table
Indexes
No indexes recorded
Column Syntax OID
wirelessIfWORPTableIndex
This parameter represents the radio for which the WORP is enabled
and index to the wirelessIfWORPTable.
Unsigned32
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.1.1.4.1.1
wirelessIfWORPMode
This parameter displays the worp mode of operation.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.1.1.4.1.2
wirelessIfWORPBaseStationName
This parameter represents the name of the BSU for which it can
register. This configuration is valid only on SU. If this
field is empty then SU is allowed to register with any BSU.
OctetStringr/w .1.3.6.1.4.1.841.1.1.1.1.1.4.1.3
wirelessIfWORPNetworkName
This parameter represents the name of the Network of the WORP Interface.
OctetStringr/w .1.3.6.1.4.1.841.1.1.1.1.1.4.1.4
wirelessIfWORPMaxSatellites
This parameter represents the maximum number of SUs allowed to register on
this BSU. This configuration is valid only on BSU.
Unsigned32r/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.1.1.4.1.5
wirelessIfWORPMTU
This parameter represents to maximum size of a frame sent from the WORP interface.
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.1.1.4.1.6
wirelessIfWORPSuperPacketing
This parameter represents the status of bundling multiple ethernet frames in one
single WORP Jumbo frame
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.1.1.4.1.7
wirelessIfWORPSleepMode
This parameter represents the status of sleep mode. This Configuration is valid
only on BSU. If there is no data available to transfer b/w BSU & SU, BSU
will keep the SU state in sleep state and polls that particular…
Enumerationr/w
Constraints:
range: 0-50
 .1.3.6.1.4.1.841.1.1.1.1.1.4.1.8
wirelessIfWORPMultiFrameBursting
This parameter enables WORP protocol to allow each side, BSU or SU, to send
a burst of multiple data messages instead of a single data message.
Enumerationr/w
Constraints:
range: 0-50
 .1.3.6.1.4.1.841.1.1.1.1.1.4.1.9
wirelessIfWORPRegistrationTimeout
This parameter represents the registration procedure timeout period for WORP
interface.
Unsigned32r/w
Constraints:
range: 0-50
 .1.3.6.1.4.1.841.1.1.1.1.1.4.1.11
wirelessIfWORPRetries
This parameter represents the number of times the same worp frame need to be
re-Transmitted, if it is not acknowledged by the peer.
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.841.1.1.1.1.1.4.1.12
wirelessIfWORPTxRate
This parameter represents the WORP interface transmission rate. Please check the
object wirelessIfWORPSupportedTxRate for supported rates.
SNMPv2-SMIUnsigned32r/w
Constraints:
range: 1-100
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.1.1.4.1.13
wirelessIfWORPSupportedTxRate
This parameter displays the supported transmission rate based on
Channel Bandwdith, Guard Interval and Number of Spacial Streams
configuration.
SNMPv2-TCDisplayString
Constraints:
range: 0-10
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.1.1.4.1.14
wirelessIfWORPInputBandwidthLimit
This parameters represents the Bandwidth limit on Input direction.
Default limit & maximum limit are based on the license file.
Unsigned32r/w
Constraints:
range: 0-25
 .1.3.6.1.4.1.841.1.1.1.1.1.4.1.15
wirelessIfWORPOutputBandwidthLimit
This parameter represents the Bandwidth limit on Output direction.
Default limit & maximum limit are based on the license file.
Unsigned32r/w
Constraints:
range: 10-86400
 .1.3.6.1.4.1.841.1.1.1.1.1.4.1.16
wirelessIfWORPBandwidthLimitType
This parameter represents the bandwidth limit type - shaping or policing.
Enumerationr/w
Constraints:
range: 10-86400
 .1.3.6.1.4.1.841.1.1.1.1.1.4.1.17
wirelessIfWORPSecurityProfileIndex
This parameter allows to configure the Security profile for
the WORP interface based on the index of the profile name
and this is Valid only on BSU.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.1.1.4.1.18
wirelessIfWORPRadiusProfileIndex
This parameter allows to configure the Radius profile for
the WORP interface based on the index of the profile
name and this is Valid only on BSU..
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.1.1.4.1.19
wirelessIfWORPMACACLStatus
This parameter is used to enable or disable the MAC access control list.
This configuration is Valid only on BSU.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.1.1.4.1.20
wirelessIfWORPRadiusMACACLStatus
This parameter is used to enable or disable the MAC ACL for Radius Profiles.
This configuration is Valid only on BSU.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.1.1.4.1.21
wirelessIfWORPRadiusAccStatus
This parameter is used to enable or disable the Radius Accounting Stats capture.
This configuration is Valid only on BSU and currently this is not accessible.
Enumeration .1.3.6.1.4.1.841.1.1.1.1.1.4.1.22
wirelessIfWORPIntfMacAddress
This parameter represents the MAC address of the wireless interface card.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.1.1.1.4.1.23
wirelessIfWORPAutoMultiFrameBursting
This parameter enables WORP protocol to allow each side, BSU or SU, to send
a burst of multiple data messages based on QOS priority instead
of a single data message.
Enumerationr/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.841.1.1.1.1.1.4.1.24

wirelessIfDDRSTable

table
.1.3.6.1.4.1.841.1.1.1.1.1.5 · 1 row entry · 13 columns
Open in standard view 
This table holds the WORP DDRS (Dynamic Data Rate Selection) feature
configurations.
wirelessIfDDRSTableEntry entry .1.3.6.1.4.1.841.1.1.1.1.1.5.1
This parameter represents the entry for DDRS table.
Indexes
ethernetIfPropertiesTableIndex
Column Syntax OID
wirelessIfDDRSTableIndex
This parameter represents the index for the DDRS table and indirectly represent the wireless interface index.
SNMPv2-SMIUnsigned32
Constraints:
range: 1-1
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.1.1.5.1.1
wirelessIfDDRSStatus
This parameter is used to enable/disable the DDRS feature for the interface.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.1.1.5.1.2
wirelessIfDDRSDefDataRate
This default data rate shall be used as WORP default data rate only when the DDRS is enabled. The rates
defined in wirelessIfWORPTxRate are used as default.
SNMPv2-SMIUnsigned32r/w
Enumerated Values:
1auto
2oneGbps
3tenMbps
4hundredMbit
5unknown
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.1.1.5.1.3
wirelessIfDDRSMaxDataRate
This parameter is used to limit the maximum possible data rate that is set
by DDRS.
SNMPv2-SMIUnsigned32r/w
Enumerated Values:
1halfDuplex
2fullDuplex
3auto
4unknown
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.1.1.5.1.4
wirelessIfDDRSIncrAvgSNRThrld
This parameter is used to specify the average SNR threshold for data rate increase.
The value should be in dB and in the range of 0..50 dB.
Unsigned32r/w
Enumerated Values:
1auto
2tenMbps-halfDuplex
3tenMbps-fullDuplex
4hundredMbps-halfDuplex
5hundredMbps-fullDuplex
6oneGbps-fullDuplex
 .1.3.6.1.4.1.841.1.1.1.1.1.5.1.5
wirelessIfDDRSIncrReqSNRThrld
This parameter is to specify minimum required SNR threshold for data rate increase.
The value should be in dB and in the range 0..50 dB.
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.1.1.5.1.6
wirelessIfDDRSDecrReqSNRThrld
This parameter is to specify minimum required SNR threshold for data rate decrease.
The value should be in dB and in the range 0..50 dB.
Unsigned32r/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.1.1.5.1.7
wirelessIfDDRSIncrReTxPercentThrld
This object specifies the threshold percentage of retransmissions for
DDRS data rate increase.
Unsigned32r/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.1.1.5.1.8
wirelessIfDDRSDecrReTxPercentThrld
This object specifies the threshold percentage of retransmissions for
DDRS data rate decrease.
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.1.1.5.1.9
wirelessIfDDRSAggressiveIndex
This object specifies the aggressiveness of the ddrs algorithm.
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.1.1.5.1.10
wirelessIfDDRSChainBalThrld
This object specifies the Mimo Chain Balance threshold.
Unsigned32r/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.841.1.1.1.1.1.5.1.11
wirelessIfDDRSRateBackOffInt
This object specifies the Rate Backoff Interval.
Unsigned32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.841.1.1.1.1.1.5.1.12
wirelessIfDDRSRateBlackListInt
This object specifies the Rate Blacklist Interval.
Unsigned32r/w
Enumerated Values:
1none
2wep
3psk
4dot1x
5worp
 .1.3.6.1.4.1.841.1.1.1.1.1.5.1.13

wirelessIfDDRSMinReqSNRTable

table
.1.3.6.1.4.1.841.1.1.1.1.1.6 · 1 row entry · 5 columns
Open in standard view
wirelessIfDDRSMinReqSNRTableEntry entry .1.3.6.1.4.1.841.1.1.1.1.1.6.1
Indexes
No indexes recorded
Column Syntax OID
wirelessIfDDRSMinReqSNRTableIndex SNMPv2-SMIUnsigned32
Enumerated Values:
1wep64
2wep128
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.1.1.6.1.1
wirelessIfDDRSMinReqSNRTableSecIndex SNMPv2-SMIUnsigned32
Enumerated Values:
0none
1wep
2wpa-tkip
3wpa2-aes
4wpa-wpa2aes-tkip
5wpa2-aes-ccm
6tkip
7aes-ccm
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.1.1.6.1.2
wirelessIfDDRSPhyModulation SNMPv2-TCDisplayString
Constraints:
range: 1-32
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.1.1.6.1.3
wirelessIfDDRSDataRate SNMPv2-TCDisplayString
Constraints:
range: 900-65535
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.1.1.6.1.4
wirelessIfDDRSMinReqSNR Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.1.1.6.1.5

ethernetIfPropertiesTable

table
.1.3.6.1.4.1.841.1.1.1.1.2.1 · 1 row entry · 8 columns
Open in standard view 
This table shows the ethernet interface(s) properties for the device.
ethernetIfPropertiesTableEntry entry .1.3.6.1.4.1.841.1.1.1.1.2.1.1
This parameter represents the entry for the Ethernet Interface Properties table.
Indexes
No indexes recorded
Column Syntax OID
ethernetIfPropertiesTableIndex
This parameter represents the physical interface and used as index to this table.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.1.2.1.1.1
ethernetIfMACAddress
This parameter represents the MAC address for the ethernet interface.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.1.1.2.1.1.2
ethernetIfSupportedSpeed
This parameter shows the supported speeds for the ethernet interface.
Enumeration .1.3.6.1.4.1.841.1.1.1.1.2.1.1.3
ethernetIfSupportedTxMode
This parameter shows the supported transmit modes of the ethernet
interface.
Enumeration .1.3.6.1.4.1.841.1.1.1.1.2.1.1.4
ethernetIfTxModeAndSpeed
This parameter is used to configure the Transmit Mode and speed of the
ethernet interface.
Enumerationr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.841.1.1.1.1.2.1.1.5
ethernetIfSupportedModes
This parameter is used to display the supported modes on ethernet interface.
SNMPv2-TCDisplayString
Constraints:
range: 1-4
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.1.2.1.1.6
ethernetIfAdminStatus
This parameter is used to configure the admin status for the ethernet interface.
Enumerationr/w
Enumerated Values:
1primaryAuthticationServer
2secondaryAuthenticationServer
3primaryAccountingServer
4secondaryAccountingServer
 .1.3.6.1.4.1.841.1.1.1.1.2.1.1.7
ethernetIfAutoShutDown
This parameter is used to configure AutoShutDown for the ethernet interface.
i.e. Ethernet interface will be automatically UP/DOWN depending upon the wireless link
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.1.2.1.1.8

wirelessSecurityCfgTable

table
.1.3.6.1.4.1.841.1.1.1.2.1.1 · 1 row entry · 14 columns
Open in standard view 
This table is used to specify the security configuration for 
the wireless interface(s) in the access point.
wirelessSecurityCfgTableEntry entry .1.3.6.1.4.1.841.1.1.1.2.1.1.1
This parameter represents an entry in the wireless security configuration table.
This table supports up to 8 entries.
Indexes
No indexes recorded
Column Syntax OID
wirelessSecurityCfgTableIndex
This parameter is used as index to the wireless security configuration table.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.2.1.1.1.1
wirelessSecurityCfgprofileName
This paramater represents user defined profile name for security configuration.
OctetStringr/w .1.3.6.1.4.1.841.1.1.1.2.1.1.1.2
wirelessSecurityCfgAuthenticationMode
This parameter is used to configure the security authentication
mode for wireless. Select
(1) - None (no security),
(2) - WEP (Wired Equivalent Privacy),
(3) - PSK (Pre-shared key),
(4) - dotlx (802.1x authentic…
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.2.1.1.1.3
wirelessSecurityCfgKeyIndex
This parameter represents the encryption key index that is
used to encrypt data that is sent via wireless interface(s).
Enumerationr/w
Constraints:
range: 1-1
 .1.3.6.1.4.1.841.1.1.1.2.1.1.1.4
wirelessSecurityCfgKey1
This parameter represents the key 1 used for wireless security
configuration. The key lengths 5/13/16 in ASCII or 10/26/32
in HEXADECIMAL configures the WEP(64/128/152-bit) encryption respectively.
…
WEPKeyTyper/w
Constraints:
range: 1-32
Textual Convention: WEPKeyType OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.841.1.1.1.2.1.1.1.5
wirelessSecurityCfgdot1xWepKeyLength
This parameter is used configure the length of the security key. Select
WEP64 if you want to have a security key for 64 characters or
WEP128 for security key length of 128 characters.
Enumerationr/w
Constraints:
range: 1-4
 .1.3.6.1.4.1.841.1.1.1.2.1.1.1.6
wirelessSecurityCfgEncryptionType
This parameter is used to configure the encryption key type for
wireless security. Select
0 for no security
1 for WEP,
2 for WPA (TKIP),
3 for WPA2(AES),
4 for WPA/WPA2 (AES-TKIP)
5 for WPA2 (AES-CCM…
Enumerationr/w
Constraints:
range: 3-12
 .1.3.6.1.4.1.841.1.1.1.2.1.1.1.7
wirelessSecurityCfgPSK
This parameter is used to configure the pre-share key. The default
key is 123456789. This parameter is logically write-only. Reading
this variable shall return astericks
OctetStringr/w
Constraints:
range: 900-65535
 .1.3.6.1.4.1.841.1.1.1.2.1.1.1.8
wirelessSecurityCfgRekeyingInterval
This parameter represents the key re-negotiation time in case of dynamic
WEP, WPA/WPA-2 (personal/enterprise) security mechanisms.
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.2.1.1.1.9
wirelessSecurityCfgEntryStatus
This parameter is used to configure the entry status of wireless
security configuration table.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
cre…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.2.1.1.1.10
wirelessSecurityCfgNetworkSecret
This parameter represents a secret password of an SU that tallies
with the BSU's password for authentic registration.
OctetStringr/w .1.3.6.1.4.1.841.1.1.1.2.1.1.1.11
wirelessSecurityCfgKey2
This parameter represents the key 2 used for wireless security
configuration. The key lengths 5/13/16 in ASCII or 10/26/32
in HEXADECIMAL configures the WEP(64/128/152-bit) encryption respectively.
The key lengths 16 …
WEPKeyTyper/w
Constraints:
range: 1-16
Textual Convention: WEPKeyType OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.841.1.1.1.2.1.1.1.12
wirelessSecurityCfgKey3
This parameter represents the key 3 used for wireless security
configuration. The key lengths 5/13/16 in ASCII or 10/26/32
in HEXADECIMAL configures the WEP(64/128/152-bit) encryption respectively.
The key lengths 16 …
WEPKeyTyper/w
Constraints:
range: 1-32
Textual Convention: WEPKeyType OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.841.1.1.1.2.1.1.1.13
wirelessSecurityCfgKey4
This parameter represents the key 4 used for wireless security
configuration. The key lengths 5/13/16 in ASCII or 10/26/32
in HEXADECIMAL configures the WEP(64/128/152-bit) encryption respectively.
The key lengths 16 …
WEPKeyTyper/w
Enumerated Values:
1allow
2deny
Textual Convention: WEPKeyType OctetString
Type Constraints:
range: 0..32
 .1.3.6.1.4.1.841.1.1.1.2.1.1.1.14

radiusSrvProfileTable

table
.1.3.6.1.4.1.841.1.1.1.2.2.1 · 1 row entry · 7 columns
Open in standard view 
This table contains the radius server configuration profiles.
radiusSrvProfileTableEntry entry .1.3.6.1.4.1.841.1.1.1.2.2.1.1
This parameter represents the entry for the radius server profile table.
Indexes
No indexes recorded
Column Syntax OID
radiusSrvProfileTableIndex
This parameter represents the user defined profiles for RADIUS Server.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.2.2.1.1.1
radiusSrvProfileTableSecIndex
This parameter represents the user defined secondary profiles for RADIUS server.
Maximum profiles are 4.
Unsigned32
Constraints:
range: 1-16
 .1.3.6.1.4.1.841.1.1.1.2.2.1.1.2
radiusSrvProfileType
This parameter represents the RADIUS Server profile type. Select
(1) for Primary Authentication Server,
(2) for Secondary Authentication Server,
(3) for Primary Accounting Server, and
(4) for Secondary Accounting Se…
Enumeration
Constraints:
range: 1-64
 .1.3.6.1.4.1.841.1.1.1.2.2.1.1.3
radiusSrvIPADDR
This parameter is used to specify the RADIUS Server IP Address.
Its default value is 169.254.128.133.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.2.2.1.1.4
radiusSrvServerPort
This parameter represents the RADIUS server authentication port and
the default value is 1812.
SNMPv2-SMIUnsigned32r/w
Constraints:
range: 0-32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.2.2.1.1.5
radiusSrvProfileServerSharedSecret
This parameter represents the shared secret between the RADIUS server
and client. It is logically treated as write-only and should return
the information in asterisks.
OctetStringr/w .1.3.6.1.4.1.841.1.1.1.2.2.1.1.6
radiusSrvProfileTableEntryStatus
This parameter is used to configure the entry status of RADIUS
server profile table.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(c…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.2.2.1.1.7

radiusSupProfileTable

table
.1.3.6.1.4.1.841.1.1.1.2.2.2 · 1 row entry · 6 columns
Open in standard view 
This table contains the radius support profile table
configurations.
radiusSupProfileTableEntry entry .1.3.6.1.4.1.841.1.1.1.2.2.2.1
This parameter represents the entry for the radius support
profile table.
Indexes
No indexes recorded
Column Syntax OID
radiusSupProfileTableIndex
This parameter represents the index for the radius support
profile table. Each index corresponds to the one profile name
in the radius server profile table
Unsigned32
Constraints:
range: 1-32
 .1.3.6.1.4.1.841.1.1.1.2.2.2.1.1
radiusSupProfileName
This parameter represents the RADIUS profile name, only one profile is supported.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.841.1.1.1.2.2.2.1.2
radiusSupProfileMaxReTransmissions
This parameter represents the number of times the radius request
message to be sent to RADIUS server after the expiry of response
time.
Unsigned32r/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.841.1.1.1.2.2.2.1.3
radiusSupProfileMsgResponseTime
This parameter represents the wait time in the RADIUS client for
the response message from RADIUS server.
Unsigned32r/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.2.2.2.1.4
radiusSupProfileReAuthenticationPeriod
The parameter represents the time interval within which the
reauthentication of the 802.1x enabled station happens.
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.2.2.2.1.5
radiusSupProfileTableEntryStatus
This parameter is used to configure the entry status of RADIUS
supported profile table.
It can be configured as
active(enable) -1,
notInService(disable) - 2
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.2.2.2.1.6

macaclProfileTable

table
.1.3.6.1.4.1.841.1.1.1.2.3.1 · 1 row entry · 4 columns
Open in standard view 
This table contains the MAC access control profile configurations.
macaclProfileTableEntry entry .1.3.6.1.4.1.841.1.1.1.2.3.1.1
This parameter represents the entry for the MAC access control profile table.
Indexes
No indexes recorded
Column Syntax OID
macaclProfileTableIndex
User defined profiles for MAC Access Control List. Max. number of profiles
are 16.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.2.3.1.1.1
macaclProfileName
This parameter represents the unique name MAC ACL profile.
OctetStringr/w
Enumerated Values:
1inboundLayer2
2inboundLayer3
3outboundLayer2
4outboundLayer3
 .1.3.6.1.4.1.841.1.1.1.2.3.1.1.2
macaclOperationType
This parameter is used o configure the type of MAC ACL profile. Select
(1) to allow and
(2) to deny.
Enumerationr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.841.1.1.1.2.3.1.1.3
macaclTableEntryStatus
This parameter is used to configure the status of the security MAC ACL profile.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(creat…
SNMPv2-TCRowStatusr/w
Enumerated Values:
1enable
2disable
3notSupported
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.2.3.1.1.4

macaclAddrTable

table
.1.3.6.1.4.1.841.1.1.1.2.3.2 · 1 row entry · 5 columns
Open in standard view 
This table holds MAC access control list addresses.
macaclAddrTableEntry entry .1.3.6.1.4.1.841.1.1.1.2.3.2.1
This parameter represents the entry for the MAC access control list address table.
Indexes
No indexes recorded
Column Syntax OID
macaclAddrTableIndex
This parameter represents the user defined profiles for MAC ACL Address.
Max. profiles are 16 profiles.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.2.3.2.1.1
macaclAddrTableSecIndex
This parameter represents the user defined secondary profiles for MAC ACL Address.
Maximum entries are 64 -- one entry per station
Unsigned32
Constraints:
range: 1-1
 .1.3.6.1.4.1.841.1.1.1.2.3.2.1.2
macaclAddrTableMACAddress
This parameter represents the valid MAC address for MAC ACL.
SNMPv2-TCMacAddressr/w
Constraints:
range: 1-4
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.1.2.3.2.1.3
macaclAddrComment
This parameter displays a valid comment for MAC ACL Address.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.841.1.1.1.2.3.2.1.4
macaclAddrTableEntryStatus
This parameter is used to configure the status of the security MAC ACL Address.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(create…
SNMPv2-TCRowStatusr/w
Constraints:
range: 0-32767
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.2.3.2.1.5

qosProfileTable

table
.1.3.6.1.4.1.841.1.1.1.3.1 · 1 row entry · 5 columns
Open in standard view 
This table holds the various profiles for QOS (quality of service) configuration.
qosProfileTableEntry entry .1.3.6.1.4.1.841.1.1.1.3.1.1
This parameter represents the entry for the qos profile table.This table
supports one entry.
Indexes
No indexes recorded
Column Syntax OID
qosProfileTableIndex
This parameter represents user defined profiles for Quality of Service (QoS).
Unsigned32
Constraints:
range: 1-32
 .1.3.6.1.4.1.841.1.1.1.3.1.1.1
qosProfileName
This parameter displays the name of the QoS profile that has been assigned.
OctetStringr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.3.1.1.2
qosProfileTablePolicyName
This parameter displays the QoS Policy profile name.
OctetStringr/w
Constraints:
range: 0-32767
 .1.3.6.1.4.1.841.1.1.1.3.1.1.3
qosProfileEDCAProfileName
This parameter displays the name for QoS EDCA profile.
OctetStringr/w
Constraints:
range: 0-32767
 .1.3.6.1.4.1.841.1.1.1.3.1.1.4
qosProfileTableQoSNACKStatus
This parameter is used to configure the status of the QoS profile ACK.
Enumerationr/w
Constraints:
range: 1-15
 .1.3.6.1.4.1.841.1.1.1.3.1.1.5

qoSPolicyTable

table
.1.3.6.1.4.1.841.1.1.1.3.2 · 1 row entry · 7 columns
Open in standard view 
This table contains the QOS policy configurations.
qoSPolicyTableEntry entry .1.3.6.1.4.1.841.1.1.1.3.2.1
This parameter represents the entry for the qos policy table.
Indexes
No indexes recorded
Column Syntax OID
qoSPolicyTableIndex
This parameter represents user defined profiles for QoS Policy list.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.3.2.1.1
qoSPolicyTableSecIndex
This parameter represents user defined secondary profiles. They are
inbound layer2 -1,
inbound layer3 -2,
outbound layer2 -3 and
outbound layer3 -4
Unsigned32 .1.3.6.1.4.1.841.1.1.1.3.2.1.2
qoSPolicyTablePolicyName
This parameter displays the QoS policy name.
SNMPv2-TCDisplayString
Constraints:
range: 1-1
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.3.2.1.3
qoSPolicyType
This parameter configures the QoS Policy type. They can be configured
as the following:
inbound layer2(1),
inbound layer3(2),
outbound layer2(3) and
outbound layer3(4)
Enumeration
Constraints:
range: 1-8
 .1.3.6.1.4.1.841.1.1.1.3.2.1.4
qoSPolicyPriorityMapping
This parameter is used as the primary index to the QoS 802.1D to 802.1p
mapping table.
Unsigned32r/w
Constraints:
range: 0-7
 .1.3.6.1.4.1.841.1.1.1.3.2.1.5
qoSPolicyMarkingStatus
This parameter is used to enable or disable QoS Policy markings. Select
(1) to enable,
(2) to disable, and
(3) for not supported option.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.3.2.1.6
qoSPolicyTableEntryStatus
The parameter is used to configure the QoS Policy Table status.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(create row) -4,
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.3.2.1.7

wirelessQoSEDCATable

table
.1.3.6.1.4.1.841.1.1.1.3.3.1 · 1 row entry · 13 columns
Open in standard view 
This table holds the wireless QOS EDCA (enhanced distributed channel access)
configurations.
wirelessQoSEDCATableEntry entry .1.3.6.1.4.1.841.1.1.1.3.3.1.1
This parameter represents the entry for the wireless QOS EDCA table.
Indexes
No indexes recorded
Column Syntax OID
wirelessQoSEDCATableIndex
This parameter is user defined profiles for Wireless QoS EDCA.
Max profile that user can define is 1.
Unsigned32
Constraints:
range: 0-63
 .1.3.6.1.4.1.841.1.1.1.3.3.1.1.1
wirelessQoSEDCATableSecIndex
This parameter represents the user defined secondary profiles for Wireless QoS EDCA.
Maximum profiles are 4.
BK -1 (back ground),
BE -2 (best effort),
VI -3 (video),
VO -4 (voice)
Unsigned32
Constraints:
range: 0-63
 .1.3.6.1.4.1.841.1.1.1.3.3.1.1.2
wirelessQoSEDCATableProfileName
This parameter displays the name for the Wireless QoS EDCA profile.
OctetStringr/w .1.3.6.1.4.1.841.1.1.1.3.3.1.1.3
wirelessQoSEDCATableCWmin
This parameter is used to configure the CW(Contention Window) min value
for the wireless QoS EDCA profile. It can be configured up to 255 value.
If this value is configured lower, then this increases the priority of
t…
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.3.3.1.1.4
wirelessQoSEDCATableCWmax
This parameter is used to configure the CW(Contention window) Max value
for the wireless QoS EDCA profile. This value can be configured up to
65535. If this value id confiured to a lower value, then this increases
the…
Unsigned32r/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.841.1.1.1.3.3.1.1.5
wirelessQoSEDCATableAIFSN
This parameter is used to configure the AIFSN (Arbitrary Inter Frame
Space Number) value for the wireless QoS EDCA profile. It can be
configured up to 15. If this value is configured lower,then this
increases the pri…
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.3.3.1.1.6
wirelessQoSEDCATableTXOP
This parameter is used to configure TXOP(transmission oppurtunities)
value for Wireless QoS EDCA. The values can be configured up to 65535.
If this value for this parameter is configured lower, then this
decreases the …
OctetStringr/w .1.3.6.1.4.1.841.1.1.1.3.3.1.1.7
wirelessQoSEDCATableACM
This parameter is used to enable or disable the value for Addmission
Control Mandatory. If ACM value is set to enable for a particular
access category, then certain procedures needs to followed for using
that access …
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.3.3.1.1.8
wirelessQoSEDCATableAPCWmin
This parameter is used to configure the minimum value for APCWmin.
It can be configured upto 32767.
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.3.3.1.1.9
wirelessQoSEDCATableAPCWmax
This parameter is used to configure the maximum value for APCWmax.
It can be configured upto 32767.
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.3.3.1.1.10
wirelessQoSEDCATableAPAIFSN
This parameter is used to configure the value fo APAIFSN(Arbitration
Inter-Frame Space Number). The value for the APAIFSN can be configured up to 15
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.3.3.1.1.11
wirelessQoSEDCATableAPTXOP
This parameter is used to configure the APTXOP (transmission oppurtunities)
for the QoS EDCA profile. If the value is set to 0, then only one MPDU or
MSDU can be transmitted
OctetStringr/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.841.1.1.1.3.3.1.1.12
wirelessQoSEDCATableAPACM
This parameter is used to configure the APACM for the QoS EDCA profile.
Select (1) to enable the profile and
(2) to disable it.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.3.3.1.1.13

l2l3QoSDot1DToDot1pMappingTable

table
.1.3.6.1.4.1.841.1.1.1.3.4.1 · 1 row entry · 3 columns
Open in standard view 
This table is used to configure Quality of Service mappings between 
802.1D and 802.1p priorities.
l2l3QoSDot1DToDot1pMappingTableEntry entry .1.3.6.1.4.1.841.1.1.1.3.4.1.1
This parameter represents entries in the QoS 802.1D to 802.1p Mapping
Table.
Indexes
No indexes recorded
Column Syntax OID
l2l3QoSDot1DToDot1pMappingTableIndex
This parameter is used as the primary index to the QoS 802.1D to 802.1p
mapping table. This is based on the QoS profile.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.3.4.1.1.1
l2l3QoSDot1dPriority
This parameter is used to specify the 802.1d priority and is used as
the secondary index to the 802.1D to 802.1p mapping table.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.3.4.1.1.2
l2l3QoSDot1pPriority
This parameter is used to specify the 802.1D priority to be mapped to a
802.1p priority
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.3.4.1.1.3

l2l3QoSDot1DToIPDSCPMappingTable

table
.1.3.6.1.4.1.841.1.1.1.3.4.2 · 1 row entry · 4 columns
Open in standard view 
This table is used to configure Quality of Service mappings between 
802.1D to IP DSCP (Differentiated Services Code Point) priorities.
l2l3QoSDot1DToIPDSCPMappingTableEntry entry .1.3.6.1.4.1.841.1.1.1.3.4.2.1
This parameter represents entries in the 802.1D to IP DSCP Mapping
Table.
Indexes
No indexes recorded
Column Syntax OID
l2l3QoSDot1DToIPDSCPMappingTableIndex
This parameter is used as the primary index to the 802.1D to IP DSCP
mapping table.
Unsigned32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.841.1.1.1.3.4.2.1.1
l2l3QoSDot1dPriorityIPDSCP
This parameter is used to specify the 802.1D priority and is used as
the secondary index to the 802.1D to IP DSCP mapping table.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.3.4.2.1.2
l2l3QoSDSCPPriorityLowerLimit
This parameter is used to specify IP DSCP lower limit.
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.3.4.2.1.3
l2l3QoSDSCPPriorityUpperLimit
This parameter is used to specify IP DSCP upper limit.
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.3.4.2.1.4

worpQoSPIRMacTable

table
.1.3.6.1.4.1.841.1.1.1.3.5.1 · 1 row entry · 5 columns
Open in standard view 
This Table holds the MAC Address details for Packet Identification Rule Clasification.
worpQoSPIRMacTableEntry entry .1.3.6.1.4.1.841.1.1.1.3.5.1.1
This parameter represents the entry for the worpQoSPIRMacTable.
Indexes
No indexes recorded
Column Syntax OID
worpQoSPIRMacTableIndex
This parameter specifies the index number of the entry in the table.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.3.5.1.1.1
worpQoSPIRMacAddr
This parameter specifies the MAC Address which can be used for PIR
classification.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.1.3.5.1.1.2
worpQoSPIRMacMask
This parameter specifies the MAC Address mask for the worpQoSPIRMacAddr.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.1.3.5.1.1.3
worpQoSPIRMacComment
This parameter specifies the comment for the mac entry.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.3.5.1.1.4
worpQoSPIRMacTableEntryStatus
This parameter is used to configure the worpQoSPIRMacTable status.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(create row) -4,
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.3.5.1.1.5

worpQoSPIRIPTable

table
.1.3.6.1.4.1.841.1.1.1.3.5.2 · 1 row entry · 5 columns
Open in standard view 
This Table holds the IP Address details for PIR (Packet Identification Rule) Clasification.
worpQoSPIRIPTableEntry entry .1.3.6.1.4.1.841.1.1.1.3.5.2.1
This parameter represents the entry for the worpQoSPIRIPTable.
Indexes
No indexes recorded
Column Syntax OID
worpQoSPIRIPTableIndex
This parameter specifies the index number of the entry in the table.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.3.5.2.1.1
worpQoSPIRIPAddr
This parameter specifies the IP Address which can be used for PIR
classification.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.3.5.2.1.2
worpQoSPIRIPSubMask
This parameter specifies the Subnet Mask for the worpQoSPIRIPAddr.
SNMPv2-SMIIpAddressr/w
Constraints:
range: 1-250
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.3.5.2.1.3
worpQoSPIRIPComment
This parameter specifies the comment for the IP Address entry.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.3.5.2.1.4
worpQoSPIRIPTableEntryStatus
This parameter is used to configure the worpQoSPIRIPTable status.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(create row) -4,
…
SNMPv2-TCRowStatusr/w
Constraints:
range: 1-8
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.3.5.2.1.5

worpQoSPIRPortTable

table
.1.3.6.1.4.1.841.1.1.1.3.5.3 · 1 row entry · 5 columns
Open in standard view 
This Table holds the TCP/UDP Port details for PIR (Packet Identification Rule) 
Clasification.
worpQoSPIRPortTableEntry entry .1.3.6.1.4.1.841.1.1.1.3.5.3.1
This parameter represents the entry for the worpQoSPIRPortTable.
Indexes
No indexes recorded
Column Syntax OID
worpQoSPIRPortTableIndex
This parameter specifies the index number of the entry in the table.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.3.5.3.1.1
worpQoSPIRStartPort
This parameter specifies the Starting TCP/UDP Port Number which can be used for PIR
classification.
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.3.5.3.1.2
worpQoSPIREndPort
This parameter specifies the Ending TCP/UDP Port Number which can be used for PIR
classification.
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.3.5.3.1.3
worpQoSPIRPortComment
This parameter specifies the comment for the TCP/UDP Port entry.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.3.5.3.1.4
worpQoSPIRPortTableEntryStatus
This parameter is used to configure the worpQoSPIRPortTable status.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(create row) -4,
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.3.5.3.1.5

worpQoSPIRMapTable

table
.1.3.6.1.4.1.841.1.1.1.3.5.4 · 1 row entry · 8 columns
Open in standard view 
This Table holds the Mapping information between PIR MAC Table entries, 
PIR IP Table entries, PIR Port Table entries with PIR Table.
worpQoSPIRMapTableEntry entry .1.3.6.1.4.1.841.1.1.1.3.5.4.1
This table represents the entry for the worpQoSPIRMapTable.
Indexes
No indexes recorded
Column Syntax OID
worpQoSPIRMapTableIndex
This parameter specifies the index number of the entry in the table.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.3.5.4.1.1
worpQoSPIRMapRuleName
This parameter specifies the PIR Rule name corresponds to this index.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.3.5.4.1.2
worpQoSPIRMapSrcMacIndexList
This parameter specifies the Source MAC Address Classification for the
PIR Rule. This is a display string consists of index number of the PIR
MAC Table entries with comma seperated. Value 0 indicates that this list
i…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.3.5.4.1.3
worpQoSPIRMapDstMacIndexList
This parameter specifies the Destination MAC Address Classification for the
PIR Rule. This is a display string consists of index number of the PIR MAC
Table entries with comma seperated. Value 0 indicates that this li…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.3.5.4.1.4
worpQoSPIRMapSrcIpAddrIndexList
This parameter specifies the Source IP Address Classification for the PIR Rule.
This is a display string consists of index number of the PIR MAC Table entries
with comma seperated. Value 0 indicates that this list is …
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.3.5.4.1.5
worpQoSPIRMapDstIpAddrIndexList
This parameter specifies the Destination IP Address Classification for the PIR Rule.
This is a display string consists of index number of the PIR MAC Table entries with
comma seperated. Value 0 indicates that this list…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.3.5.4.1.6
worpQoSPIRMapSrcPortIndexList
This parameter specifies the Source TCP/UDP Port Classification for the PIR Rule.
This is a display string consists of index number of the PIR MAC Table entries with
comma seperated. Value 0 indicates that this list i…
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.3.5.4.1.7
worpQoSPIRMapDstPortIndexList
This parameter specifies the Destination TCP/UDP Port Classification for the PIR Rule.
This is a display string consists of index number of the PIR MAC Table entries with
comma seperated. Value 0 indicates that this l…
SNMPv2-TCDisplayStringr/w
Constraints:
range: 0-256
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.3.5.4.1.8

worpQoSSUTable

table
.1.3.6.1.4.1.841.1.1.1.3.5.8 · 1 row entry · 5 columns
Open in standard view 
This Table holds the SU/End Point B entries for QoS feature.
worpQoSSUTableEntry entry .1.3.6.1.4.1.841.1.1.1.3.5.8.1
This parameter represents the entry for the worpQoSSUTable.
Indexes
No indexes recorded
Column Syntax OID
worpQoSSUTableIndex
This parameter specifies the index number of the entry in the table
Unsigned32 .1.3.6.1.4.1.841.1.1.1.3.5.8.1.1
worpQoSSUMACAddress
This parameter specifies the wireless MAC Address of the SU or End Point B
SNMPv2-TCMacAddressr/w
Constraints:
range: 0-16
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.1.3.5.8.1.2
worpQoSSUQoSClassIndex
This parameter specifies the reference index of the QoS Class Table index.
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.3.5.8.1.3
worpQoSSUComment
This parameter specifies the comment for this entry.
SNMPv2-TCDisplayStringr/w
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.3.5.8.1.4
worpQoSSUTableEntryStatus
This parameter is used to configure the worpQoSSUTable status.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(create row) -4,
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.3.5.8.1.5

netIpCfgTable

table
.1.3.6.1.4.1.841.1.1.1.4.1.1 · 1 row entry · 5 columns
Open in standard view 
This table is used to configure the network IP parameters.
netIpCfgTableEntry entry .1.3.6.1.4.1.841.1.1.1.4.1.1.1
This table represents the entry for the network IP configuration table
Indexes
No indexes recorded
Column Syntax OID
netIpCfgTableIndex
This parameter represents the index for the network IP configuration table
and interface number.
SNMPv2-SMIUnsigned32
Enumerated Values:
1tcp
2udp
3both
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.4.1.1.1.1
netIpCfgIPAddress
This parameter is used to configure the IP Address for the ethernet interface.
SNMPv2-SMIIpAddressr/w
Constraints:
range: 0-65535
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.4.1.1.1.2
netIpCfgSubnetMask
This parameter is used to configure the subnet mask for the ethernet interface.
SNMPv2-SMIIpAddressr/w
Constraints:
range: 0-65535
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.4.1.1.1.3
netIpCfgDefaultRouterIPAddress deprecated
This parameter is used to set the IP address of the gateway or router of the device.
This parameter is deprecated and please use the object
netCfgAllIntfDefaultRouterIpAddr to set the gateway IP address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.4.1.1.1.4
netIpCfgAddressType
This parameter is used to specify whether the device network paramenters
are to be configured through a dhcp client or to be assigned statically.
If the value is set to 1, then the device is configured as static.
If th…
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.4.1.1.1.5

netIpWirelessCfgTable

table
.1.3.6.1.4.1.841.1.1.1.4.1.2 · 1 row entry · 3 columns
Open in standard view 
This table is used to configure the wireless network IP parameters in
routing mode.
netIpWirelessCfgTableEntry entry .1.3.6.1.4.1.841.1.1.1.4.1.2.1
This table represents the entry for the network IP configuration table
Indexes
No indexes recorded
Column Syntax OID
netIpWirelessCfgTableIndex
This parameter is user defined index or interface number in the
network IP wireless configuration table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.4.1.2.1.1
netIpWirelessCfgIPAddress
This parameter is used to configure the IP Address for the wireless interface.
SNMPv2-SMIIpAddressr/w
Enumerated Values:
1enable
2disable
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.4.1.2.1.2
netIpWirelessCfgSubnetMask
This parameter is used to configure the subnet mask for the wireless interface.
SNMPv2-SMIIpAddressr/w
Enumerated Values:
1simple
2md5
3none
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.4.1.2.1.3

netIpStaticRouteTable

table
.1.3.6.1.4.1.841.1.1.1.4.1.3 · 1 row entry · 6 columns
Open in standard view 
This table is used to configure the static routes in routing mode.
netIpStaticRouteTableEntry entry .1.3.6.1.4.1.841.1.1.1.4.1.3.1
This parameter represents the entry status for the netIpStaticRouteTable
and this table holds upto 256 entries.
Indexes
No indexes recorded
Column Syntax OID
netIpStaticRouteTableIndex
This parameter represents the index of the netIpStaticRouteTable.
Unsigned32
Enumerated Values:
1yes
2no
 .1.3.6.1.4.1.841.1.1.1.4.1.3.1.1
netIpStaticRouteDestAddr
This parameter is used to enter the destination IP address for which
the static route is to be made.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.4.1.3.1.2
netIpStaticRouteMask
This parameter is used to enter the mask for the destination address.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.4.1.3.1.3
netIpStaticRouteNextHop
This parameter represents the next reachable hop using which route is made
to the destination IP address.
SNMPv2-SMIIpAddressr/w
Constraints:
range: 1-1
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.4.1.3.1.4
netIpStaticRouteMetric
This parameter represents the Metric, i.e.,the 'distance' to the target
(usually counted in hops).
Unsigned32r/w
Enumerated Values:
1transparent
2access
3trunk
 .1.3.6.1.4.1.841.1.1.1.4.1.3.1.5
netIpStaticRouteTableEntryStatus
This parameter is used to configure the netIpStaticRouteTable status.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(create row) -4,…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.4.1.3.1.6

natStaticPortBindTable

table
.1.3.6.1.4.1.841.1.1.1.4.3.3 · 1 row entry · 6 columns
Open in standard view 
This table is used to configure NAT Port bind specific 
information.
natStaticPortBindTableEntry entry .1.3.6.1.4.1.841.1.1.1.4.3.3.1
This parameter represents an entry in the NAT Static Port Bind
Table.
Indexes
No indexes recorded
Column Syntax OID
natStaticPortBindTableIndex
This parameter is used as the index for the NAT static Port
bind table.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.4.3.3.1.1
natStaticPortBindLocalAddr
This parameter represents the local IP address for this NAT Static
Port bind Table entry.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.4.3.3.1.2
natStaticPortBindPortType
This parameter represents the port type for this NAT Static
Port bind Table entry.
Enumerationr/w
Constraints:
range: 1-2
 .1.3.6.1.4.1.841.1.1.1.4.3.3.1.3
natStaticPortBindStartPortNum
This parameter represents the start port number for this NAT Static
Port bind Table entry.
Unsigned32r/w
Constraints:
range: 1-256
 .1.3.6.1.4.1.841.1.1.1.4.3.3.1.4
natStaticPortBindEndPortNum
This parameter represents the end port number for this NAT Static
Port bind Table entry.
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.4.3.3.1.5
natStaticPortBindTableEntryStatus
This parameter is used to configure the natStaticPortBindTable status.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(create row) -4…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.4.3.3.1.6

ripConfigTable

table
.1.3.6.1.4.1.841.1.1.1.4.4.2 · 1 row entry · 7 columns
Open in standard view 
This table is used to configure the RIP configuration information.
ripConfigTableEntry entry .1.3.6.1.4.1.841.1.1.1.4.4.2.1
This parameter represents the entry for the ripConfigTable.
Indexes
etherProtocolFilterTableIndex
Column Syntax OID
ripConfigTableIndex
This parameter represents the index for ripConfigTable.
SNMPv2-SMIUnsigned32
Constraints:
range: 1-64
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.4.4.2.1.1
ripInterfaceName
This parameter shows the available interfaces for which the rip can
be configured.
SNMPv2-TCDisplayString
Constraints:
range: 1-32
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.4.4.2.1.2
ripInterfaceStatus
This parameter is used to enable/disable the rip for the particular
interface.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.4.4.2.1.3
ripInterfaceAuthType
This parameter represents the authentication type used for rip configuration.
Enumerationr/w
Enumerated Values:
1block
2passthru
 .1.3.6.1.4.1.841.1.1.1.4.4.2.1.4
ripInterfaceAuthKey
This parameter is used to configure the authentication key for the authentication
type.
OctetStringr/w .1.3.6.1.4.1.841.1.1.1.4.4.2.1.5
ripInterfaceVersionNum
This parameters allows to configure the rip version verion.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.4.4.2.1.6
ripReceiveOnly
This parameter allows to configure the interface to receive only RIP
version 1 and/or RIP verison 2 packets.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.4.4.2.1.7

vlanEthCfgTable

table
.1.3.6.1.4.1.841.1.1.1.5.4 · 1 row entry · 5 columns
Open in standard view 
This table is used to configure the VLAN parameters for the ethernet
interface.
vlanEthCfgTableEntry entry .1.3.6.1.4.1.841.1.1.1.5.4.1
This parameter represents the entry for the Vlan Configuration
table.
Indexes
No indexes recorded
Column Syntax OID
vlanEthCfgTableIndex
This parameter represents the physical interface and used as index to this table.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.5.4.1.1
vlanMode
This parameter is used to set the VLAN Mode for the physical interface.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.5.4.1.2
accessVLANId
This parameter is used to set the access VlanId for the physical interface.
VlanIdr/w
Textual Convention: VlanId Integer32
Type Constraints:
range: -1..4094
 .1.3.6.1.4.1.841.1.1.1.5.4.1.3
accessVLANPriority
This parameter is used to set the access Vlan priority, which varies from 0 to 7 with
7 having highest priority.
Unsigned32r/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.841.1.1.1.5.4.1.4
untaggedFrames
This parameter is used to set the option to allow the untagged frames.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.5.4.1.5

vlanEthTrunkTable

table
.1.3.6.1.4.1.841.1.1.1.5.5 · 1 row entry · 4 columns
Open in standard view 
This table is used to configure the VLAN trunk parameters for ethernet 
interface.
vlanEthTrunkTableEntry entry .1.3.6.1.4.1.841.1.1.1.5.5.1
This parameter represents the entry for the Vlan Trunk Configuration
table.
Indexes
advancedFilterTableIndex
Column Syntax OID
vlanEthTrunkTableIndex
This parameter represents the vlan trunk table index and also
represents the ethernet interface.
Unsigned32
Constraints:
range: 1-5
 .1.3.6.1.4.1.841.1.1.1.5.5.1.1
vlanEthTrunkTableSecIndex
This parameter represents the trunk table secondary index.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.5.5.1.2
ethVLANTrunkId
This parameter is used to set the trunk id.
VlanIdr/w
Enumerated Values:
1ethernet2wireless
2wireless2ethernet
3both
Textual Convention: VlanId Integer32
Type Constraints:
range: -1..4094
 .1.3.6.1.4.1.841.1.1.1.5.5.1.3
vlanEthTrunkTableEntryStatus
This parameter is used to configure the vlan trunk table status.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(create row) -4,
…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.5.5.1.4

etherProtocolFilterTable

table
.1.3.6.1.4.1.841.1.1.1.6.3.3 · 1 row entry · 5 columns
Open in standard view 
This table contains the two byte hexadecimal values of the  
protocols. The packets whose protocol field matches with any of  
the entries in this table will be forwarded or dropped.
etherProtocolFilterTableEntry entry .1.3.6.1.4.1.841.1.1.1.6.3.3.1
This parameter represents an entry in the protocol filter table.
This table supports upto 64 entries.
Indexes
tcpudpPortFilterTableIndex
Column Syntax OID
etherProtocolFilterTableIndex
This parameter represents the index of the ethernet protocol Filtering table.
Unsigned32
Constraints:
range: 1-64
 .1.3.6.1.4.1.841.1.1.1.6.3.3.1.1
etherProtocolFilterProtocolName
This parameter represents a two byte hexadecimal value for the Ethernet
protocol to be filtered.
OctetStringr/w
Constraints:
range: 1-32
 .1.3.6.1.4.1.841.1.1.1.6.3.3.1.2
etherProtocolFilterProtocolNumber
This parameter represents the value in the protocol field of the
Ethernet packet. The value is of 4-digit Hex format.
Example:
The value of IP protocol is 0800.
The value of ARP protocol is 0806.
OctetStringr/w .1.3.6.1.4.1.841.1.1.1.6.3.3.1.3
etherprotocolFilterStatus
This parameter is used to configure the status of the ethernet
protocol filtering. Select
1 to block,
2 to passthru.
Enumerationr/w
Enumerated Values:
1tcp
2udp
3both
 .1.3.6.1.4.1.841.1.1.1.6.3.3.1.4
etherProtocolFilterTableStatus
This parameter is used to configure the ethernet protocol filtering
table status.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(cre…
SNMPv2-TCRowStatusr/w
Enumerated Values:
1onlyEthernet
2onlyWireless
3allInterfaces
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.6.3.3.1.5

staticMACAddrFilterTable

table
.1.3.6.1.4.1.841.1.1.1.6.4.1 · 1 row entry · 7 columns
Open in standard view 
This table provides the MAC address of the stations on the wired  
and the wireless interface; the MAC addresses will be given in  
pairs.  Stations listed in the Static MAC Address filter will  
have no traffic forwarded by the device.  This way Multicast  
traffic exchanged between stations or servers can be prevented,  
from being transmitted over the wireless medium when both stations  
are actually located on the wired backbone.
staticMACAddrFilterTableEntry entry .1.3.6.1.4.1.841.1.1.1.6.4.1.1
This parameter identifies the entry in the Static MAC address
filter table. This table support upto 200 entries.
Indexes
No indexes recorded
Column Syntax OID
staticMACAddrFilterTableIndex
This parameter is user defined that represents the index of
the Static MAC Filtering table.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.6.4.1.1.1
staticMACAddrFilterWiredMACAddress
This parameter represents the MAC address of the station on the
wired interface of the device.
SNMPv2-TCMacAddressr/w
Constraints:
range: 1-250
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.1.6.4.1.1.2
staticMACAddrFilterWiredMACMask
This parameter represents the MAC address of the filter wired MASK.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.1.6.4.1.1.3
staticMACAddrFilterWirelessMACAddress
This parameter represents the MAC address for the wireless interface.
SNMPv2-TCMacAddressr/w
Enumerated Values:
1enable
2disable
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.1.6.4.1.1.4
staticMACAddrFilterWirelessMACMask
This parameter represents the mask for the wireless interface MAC address.
SNMPv2-TCMacAddressr/w
Enumerated Values:
1enable
2disable
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.1.6.4.1.1.5
staticMACAddrFilterComment
This parameter is used for an optional comment associated to
the staticMACAddrFilter entry.
OctetStringr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.6.4.1.1.6
staticMACAddrFilterTableEntryStatus
This parameter is used to configure the status of the staticMACAddrFilterTable. Select
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndG…
SNMPv2-TCRowStatusr/w
Enumerated Values:
1enable
2disable
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.6.4.1.1.7

advancedFilterTable

table
.1.3.6.1.4.1.841.1.1.1.6.5.1 · 1 row entry · 4 columns
Open in standard view 
This table is used to configure the advanced filtering using
protocol name and direction.
advancedFilterTableEntry entry .1.3.6.1.4.1.841.1.1.1.6.5.1.1
This parameter represents the entry for advancedFilterTable.
This table supports up to 5 entries.
Indexes
No indexes recorded
Column Syntax OID
advancedFilterTableIndex
This parameter represents the index of the advanced filtering table.
Unsigned32
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.6.5.1.1.1
advancedFilterProtocolName
This parameter represents the protocol name to be filtered. (DenyIPX RIP,
Deny IPX SAP, Deny IPX LSP, Deny IP Broadcasts, Deny IP Multicasts)
SNMPv2-TCDisplayString
Enumerated Values:
1enable
2disable
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.6.5.1.1.2
advancedFilterDirection
This parameter represents the direction of the individual entry in
the advanced filter table. The direction can be enabled either for
Ethernet to Wireless, Wireless to Ethernet or both. Select
1 for ethernet2wireless…
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.6.5.1.1.3
advancedFilterTableEntryStatus
This parameter is used to configure the row status of the advanced
filtering table.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
…
SNMPv2-TCRowStatusr/w
Enumerated Values:
1enable
2disable
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.6.5.1.1.4

tcpudpPortFilterTable

table
.1.3.6.1.4.1.841.1.1.1.6.6.2 · 1 row entry · 6 columns
Open in standard view 
This table contains the configurations for the Tcp Udp Port Filtering table.
tcpudpPortFilterTableEntry entry .1.3.6.1.4.1.841.1.1.1.6.6.2.1
This parameter represents the entry for tcpudpPortFilterTable.
This table supports up to 64 entries.
Indexes
No indexes recorded
Column Syntax OID
tcpudpPortFilterTableIndex
This parameter is used as index for the TcpUdp port filter table.
Unsigned32
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.6.6.2.1.1
tcpudpPortFilterProtocolName
This parameter represents the protocol name for the tcpudpPortFilter.
OctetStringr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.6.6.2.1.2
tcpudpPortFilterPortNumber
This parameter represents the Port number for the tcpudpPortFilter.
SNMPv2-SMIUnsigned32r/w
Enumerated Values:
1enable
2disable
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.6.6.2.1.3
tcpudpPortFilterPortType
This parameter represents the port type for this TcpUdp Port filter table.
The parameter can be either TCP or UDP or TCP/UDP. Select
1 for TCP,
2 for UDP and
3 for both.
Enumerationr/w
Enumerated Values:
1enable
2disable
 .1.3.6.1.4.1.841.1.1.1.6.6.2.1.4
tcpudpPortFilterInterface
This parameter is used to configure the interface. By default, the parameter
is set to All Interfaces. The filter can be enabled either for Ethernet,
Wireless or All Interface. Select
1 for only Ethernet,
2 for onl…
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.6.6.2.1.5
tcpudpPortFilterTableEntryStatus
The parameter indicates the status of the TCP/UDP portfilter table entry.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(create row) -4,
destroy(delete) - 6)
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.6.6.2.1.6

worpIntraCellBlockingMACTable

table
.1.3.6.1.4.1.841.1.1.1.6.7.2 · 1 row entry · 19 columns
Open in standard view 
The MAC table entries for IntraCell Blocking filters.  This table 
can hold up to a maximum of 250 entries.
worpIntraCellBlockingMACTableEntry entry .1.3.6.1.4.1.841.1.1.1.6.7.2.1
This parameter represents the entry in the IntraCell Blocking MAC Table.
Indexes
No indexes recorded
Column Syntax OID
worpIntraCellBlockingMACTableIndex
This parameter is used as the index to the IntraCell Blocking MAC Table.
Unsigned32
Constraints:
range: 1-32
 .1.3.6.1.4.1.841.1.1.1.6.7.2.1.1
worpIntraCellBlockingMACAddress
This parameter represents the MAC address of the SU which is allowed to
communicate with other SUs with the same group ID.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.1.6.7.2.1.2
worpIntraCellBlockingGroupID1
This parameter enables to segregate the SUs for intra/ inter cell communications.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.6.7.2.1.3
worpIntraCellBlockingGroupID2
This parameter enables to segregate the SUs for intra/ inter cell communications.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.6.7.2.1.4
worpIntraCellBlockingGroupID3
This parameter enables to segregate the SUs for intra/ inter cell communications.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.6.7.2.1.5
worpIntraCellBlockingGroupID4
This parameter enables to segregate the SUs for intra/ inter cell communications.
Enumerationr/w
Enumerated Values:
1ethernet
2wireless
 .1.3.6.1.4.1.841.1.1.1.6.7.2.1.6
worpIntraCellBlockingGroupID5
This parameter enables to segregate the SUs for intra/ inter cell communications.
Enumerationr/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.841.1.1.1.6.7.2.1.7
worpIntraCellBlockingGroupID6
This parameter enables to segregate the SUs for intra/ inter cell communications.
Enumerationr/w
Constraints:
range: 0-65536
 .1.3.6.1.4.1.841.1.1.1.6.7.2.1.8
worpIntraCellBlockingGroupID7
This parameter enables to segregate the SUs for intra/ inter cell communications.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.6.7.2.1.9
worpIntraCellBlockingGroupID8
This parameter enables to segregate the SUs for intra/ inter cell communications.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.6.7.2.1.10
worpIntraCellBlockingGroupID9
This parameter enables to segregate the SUs for intra/ inter cell communications.
Enumerationr/w
Constraints:
range: 1-5
 .1.3.6.1.4.1.841.1.1.1.6.7.2.1.11
worpIntraCellBlockingGroupID10
This parameter enables to segregate the SUs for intra/ inter cell communications.
Enumerationr/w
Enumerated Values:
1bridge
2ethernet1
3ethernet2
4wireless1
 .1.3.6.1.4.1.841.1.1.1.6.7.2.1.12
worpIntraCellBlockingGroupID11
This parameter enables to segregate the SUs for intra/ inter cell communications.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.6.7.2.1.13
worpIntraCellBlockingGroupID12
This parameter enables to segregate the SUs for intra/ inter cell communications.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.6.7.2.1.14
worpIntraCellBlockingGroupID13
This parameter enables to segregate the SUs for intra/ inter cell communications.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.6.7.2.1.15
worpIntraCellBlockingGroupID14
This parameter enables to segregate the SUs for intra/ inter cell communications.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.6.7.2.1.16
worpIntraCellBlockingGroupID15
This parameter enables to segregate the SUs for intra/ inter cell communications.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.6.7.2.1.17
worpIntraCellBlockingGroupID16
This parameter enables to segregate the SUs for intra/ inter cell communications.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.6.7.2.1.18
worpIntraCellBlockingMACTableEntryStatus
This parameter is used to configure the row status for the worp Intra cell blocking
MAC table.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(create row) -4,
destroy(delete) - 6
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.6.7.2.1.19

worpIntraCellBlockingGroupTable

table
.1.3.6.1.4.1.841.1.1.1.6.7.3 · 1 row entry · 3 columns
Open in standard view 
This table holds the group entries for IntraCell Blocking.
worpIntraCellBlockingGroupTableEntry entry .1.3.6.1.4.1.841.1.1.1.6.7.3.1
This parameter represents the entry in the IntraCell Blocking
Group Table. This table can contain a maximum of 16 entries.
Indexes
dhcpServerIpPoolTableIndex
Column Syntax OID
worpIntraCellBlockingGroupTableIndex
This parameter is used as the index to the IntraCell Blocking
Group Table.
Unsigned32
Constraints:
range: 1-5
 .1.3.6.1.4.1.841.1.1.1.6.7.3.1.1
worpIntraCellBlockingGroupName
This parameter represents the group name.
OctetStringr/w
Enumerated Values:
1bridge
2ethernet1
3ethernet2
4wireless1
 .1.3.6.1.4.1.841.1.1.1.6.7.3.1.2
worpIntraCellBlockingGroupTableEntryStatus
This parameter is used to enable, disable the IntraCell Blocking Group Table.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.6.7.3.1.3

stormThresholdTable

table
.1.3.6.1.4.1.841.1.1.1.6.10.1 · 1 row entry · 4 columns
Open in standard view 
This table contains information on the threshold value
of the multicast and brodcast packects that can be 
processed for interface(s) present in the device .
stormThresholdTableEntry entry .1.3.6.1.4.1.841.1.1.1.6.10.1.1
This parameter represents the entry in the storm threshold
table.
Indexes
No indexes recorded
Column Syntax OID
stormThresholdTableIndex
This parameter is used as index for the storm Threshold Table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.6.10.1.1.1
stormFilterInterface
This parameter is used to configure the interface.The filter can be enabled
either for Ethernet or Wireless.
1 for Ethernet
2 for Wireless
Enumeration .1.3.6.1.4.1.841.1.1.1.6.10.1.1.2
stormMulticastThreshold
This parameter is used to provide the threshold value of the
multicast packets to be processed for the interface.
If threshold value for multicast packets is set to '0', no
filtering will take place (filtering will be …
Integer32r/w .1.3.6.1.4.1.841.1.1.1.6.10.1.1.3
stormBroadcastThreshold
This parameter is used to provide the threshold value of the
broadcast packets to be processed for interface.If threshold
value for broadcast packets is set to '0', no filtering will
take place (filtering will be disabl…
Integer32r/w .1.3.6.1.4.1.841.1.1.1.6.10.1.1.4

dhcpServerIfTable

table
.1.3.6.1.4.1.841.1.1.1.7.1.3 · 1 row entry · 9 columns
Open in standard view 
This table is used to configure the DHCP server for a particular interface.
dhcpServerIfTableEntry entry .1.3.6.1.4.1.841.1.1.1.7.1.3.1
This parameter represents the entry for the dhcpServerIfTable.
Indexes
No indexes recorded
Column Syntax OID
dhcpServerIfTableIndex
This parameter represents the index for the dhcpServerIfTable.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.7.1.3.1.1
dhcpServerInterfaceType
This parameter shows the list of interfaces for which the DHCP
can be configured.
Enumeration .1.3.6.1.4.1.841.1.1.1.7.1.3.1.2
dhcpServerNetMask
This parameter is used to configure the mask for the interface shown.
SNMPv2-SMIIpAddressr/w
Constraints:
range: 1-5
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.7.1.3.1.3
dhcpServerDefaultGateway
This parameter represents the IP Address of the gateway or router
that the DHCP Server will assign to the DHCP client.
SNMPv2-SMIIpAddressr/w
Constraints:
range: 1-5
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.7.1.3.1.4
dhcpServerPrimaryDNS
This parameter represents the primary DNS Server IP Address to be
assinged to a DHCP Client.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.7.1.3.1.5
dhcpServerSecondaryDNS
This parameter represents the secondary DNS Server IP Address to be
assinged to a DHCP Client.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.7.1.3.1.6
dhcpServerDefaultLeaseTime
This parameter represents the default lease time, in 100th seconds, for
the IP address assigned by the DHCP server to the DHCP client.
SNMPv2-SMITimeTicksr/w
Enumerated Values:
1unitedStatesAll
2unitedStatesAdhoc
3unitedStates2p4
4worldAll
5world4p9GHz
6world2p4GHz
7world2p3GHz
8world2p5GHz
9canada5GHz
10europe5p8GHz
11europe5p4GHz
12europe2p4GHz
13russia5GHz
14taiwan5GHz
15unitedStates5GHz
16canada5p8GHz
17russiaFC
18japan2p4
19japan4p9
20uk5p8GHz
21world5p9GHz
22unitedStates5p3And5p8GHz
23india5p8GHz
24brazil5p4GHz
25brazil5p8GHz
26australia5p4GHz
27australia5p8GHz
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.7.1.3.1.7
dhcpServerIfTableComment
This parameter represents an optional comment for this table entry.
SNMPv2-TCDisplayStringr/w
Enumerated Values:
1unitedStatesAll
2unitedStatesAdhoc
3unitedStates2p4
4worldAll
5world4p9GHz
6world2p4GHz
7world2p3GHz
8world2p5GHz
9canada5GHz
10europe5p8GHz
11europe5p4GHz
12europe2p4GHz
13russia5GHz
14taiwan5GHz
15unitedStates5GHz
16canada5p8GHz
17russiaFC
18japan2p4
19japan4p9
20uk5p8GHz
21world5p9GHz
22unitedStates5p3And5p8GHz
23india5p8GHz
24brazil5p4GHz
25brazil5p8GHz
26australia5p4GHz
27australia5p8GHz
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.7.1.3.1.8
dhcpServerIfTableEntryStatus
This parameter is used to configure the row status for the dhcpServerIfTable.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(create row) -4,
destroy(delete) - 6
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.7.1.3.1.9

dhcpServerIpPoolTable

table
.1.3.6.1.4.1.841.1.1.1.7.1.4 · 1 row entry · 5 columns
Open in standard view 
This table contains the pools of IP Addresses that the DHCP server 
will assign to the DHCP clients.
dhcpServerIpPoolTableEntry entry .1.3.6.1.4.1.841.1.1.1.7.1.4.1
This parameter represents entries in the dhcpServerIpPoolTable.
Indexes
No indexes recorded
Column Syntax OID
dhcpServerIpPoolTableIndex
This parameter is used as the index for the IP Address Pool table.
Unsigned32 .1.3.6.1.4.1.841.1.1.1.7.1.4.1.1
dhcpServerIpPoolInterface
This parameter shows the list of interfaces for which the DHCP
server can be configured.
Enumerationr/w .1.3.6.1.4.1.841.1.1.1.7.1.4.1.2
dhcpServerIpPoolStartIpAddress
This parameter represents the start IP address for this DHCP IP
Address IP Pool Table entry.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.7.1.4.1.3
dhcpServerIpPoolEndIpAddress
This parameter represents the end IP address for this DHCP IP
Address IP Pool Table entry.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.7.1.4.1.4
dhcpServerIpPoolTableEntryStatus
This parameter is used to configure the row status for the dhcpServerIpPoolTable.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(create row) -4,
destroy(delete) - 6
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.7.1.4.1.5

dhcpRelayServerTable

table
.1.3.6.1.4.1.841.1.1.1.7.2.1 · 1 row entry · 3 columns
Open in standard view 
This table contains a list of DHCP servers to which the
DHCP Agent will communicate with.
dhcpRelayServerTableEntry entry .1.3.6.1.4.1.841.1.1.1.7.2.1.1
This parameter represents and entry in the DHCP Server table.
Indexes
No indexes recorded
Column Syntax OID
dhcpRelayServerTableIndex
This parameter is used as the index to this dhcpRelayServerTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.7.2.1.1.1
dhcpRelayServerIpAddress
This parameter represents the IP address of the DHCP server
that shall receive DHCP requests from the device.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.1.7.2.1.1.2
dhcpRelayServerTableEntryStatus
This parameter is used to configure the row status for the dhcpRelayServerTable.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(create row) -4,
destroy(delete) - 6
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.1.7.2.1.1.3

sysTypeTable

table
.1.3.6.1.4.1.841.1.1.1.8.1 · 1 row entry · 7 columns
Open in standard view 
This table holds the information about the supported and current 
modes of the device.
sysTypeTableEntry entry .1.3.6.1.4.1.841.1.1.1.8.1.1
This parameter represents the entry status for the sysTypeTable. It can
hold one entry.
Indexes
No indexes recorded
Column Syntax OID
sysTypeRadioIfIndex
This parameter represents the physical interface (radio) and
index for the sysType Table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.1.8.1.1.1
sysTypeMode
This parameter is used to configure the mode of the radio(s). Please
refer the sysTypeSupportedMode object for the supported modes. The modes
are represented in numbers as follows:
AP (1),
CLIENT (2),
WDS (3),
BSU (4),…
Unsigned32r/w .1.3.6.1.4.1.841.1.1.1.8.1.1.2
sysTypeActiveMode
This parameter shows the active mode of the radio(s). The configured mode
will take effect after the reboot. The modes are represented in numbers
as follows:
AP (1),
CLIENT (2),
WDS (3),
BSU (4), *Applies in TMP(tsuna…
Unsigned32 .1.3.6.1.4.1.841.1.1.1.8.1.1.3
sysTypeSupportedMode
This parameter displays the supported modes of operations complying
with the license.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.8.1.1.4
sysTypeSupportedFreqDomains
This parameter displays the supported frequency domains.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.1.8.1.1.5
sysTypeFreqDomain
This parameter is used to configure the frequency domain. The following
list shows in detail:
- United States All: 5.3 + 5.4 with DFS and 5.8 without DFS
- United States Adhoc: 5.8 without DFS only
- United States 2.4 …
Enumerationr/w
Enumerated Values:
0invalid
1connectorized
2integrated
 .1.3.6.1.4.1.841.1.1.1.8.1.1.6
sysTypeActiveFreqDomain
This parameter shows the active frequency domain. The following
list shows in detail:
- United States All: 5.3 + 5.4 with DFS and 5.8 without DFS
- United States Adhoc: 5.8 without DFS only
- United States 2.4 GHz
- Wor…
Enumeration
Enumerated Values:
0invalid
1oneCrossOneAntenna
2twoCrossTwoAntenna
3threeCrossThreeAntenna
 .1.3.6.1.4.1.841.1.1.1.8.1.1.7

sysInvMgmtComponentTable

table
.1.3.6.1.4.1.841.1.1.2.1.2.1 · 1 row entry · 8 columns
Open in standard view 
This table holds the system's inventory management component features.
sysInvMgmtComponentTableEntry entry .1.3.6.1.4.1.841.1.1.2.1.2.1.1
This parameter represents the entry for the sysInvmgmtComponentTable
Indexes
mgmtSnmpAccessTableIndex
Column Syntax OID
sysInvMgmtCompTableIndex
This parameter represents the index for sysInvMgmtCompTable.
SNMPv2-SMIUnsigned32
Constraints:
range: 0-20
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.2.1.2.1.1.1
sysInvMgmtCompSerialNumber
This parameter identifies the system component serial number
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.2.1.2.1.1.2
sysInvMgmtCompName
This parameter identifies the system component name.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.2.1.2.1.1.3
sysInvMgmtCompId
This parameter shows the identifier for the component.
SNMPv2-SMIUnsigned32
Constraints:
range: 1-5
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.2.1.2.1.1.4
sysInvMgmtCompVariant
This parameter identifies the system component variant number.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.2.1.2.1.1.5
sysInvMgmtCompReleaseVersion
This parameter identifies the system component release version number.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.2.1.2.1.1.6
sysInvMgmtCompMajorVersion
This parameter identifies the system component major version number.
SNMPv2-SMIUnsigned32
Constraints:
range: 0-127
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.2.1.2.1.1.7
sysInvMgmtCompMinorVersion
This parameters identifies the system component minor version number.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.2.1.2.1.1.8

sysLicFeatureTable

table
.1.3.6.1.4.1.841.1.1.2.1.3.7 · 1 row entry · 3 columns
Open in standard view 
This table contains a list of features that the current image supports
and indicates if this feature is licensed or not. Each row represents a 
supported feature. Supported indicates if the current image supports the image 
while licensed indicates that a license is available to use this feature.
Based on the license information in this table, some MIB groups/subgroups/tables
are enabled or disabled.
sysLicFeatureTableEntry entry .1.3.6.1.4.1.841.1.1.2.1.3.7.1
This table parameter represents the entry for the sysLicFeatureTable. This
table can hold a maximum of 50 entries.
Indexes
mgmtAccessTableIndex
Column Syntax OID
sysLicFeatureTableIndex
This parameter represents the index for the sysLicFeatureTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.2.1.3.7.1.1
sysLicFeatureType
This parameter represents the feature type and shows the code of the feature.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.2.1.3.7.1.2
sysLicFeatureValue
This parameter represents feature value i.e., enabled or disabled.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.2.1.3.7.1.3

sysLicRadioInfoTable

table
.1.3.6.1.4.1.841.1.1.2.1.3.14 · 1 row entry · 5 columns
Open in standard view 
This table holds the license file parameters for the radio(s).
sysLicRadioInfoTableEntry entry .1.3.6.1.4.1.841.1.1.2.1.3.14.1
This table parameter represents the entry for the sysLicRadioInfoTable.
Indexes
syslogHostTableIndex
Column Syntax OID
sysLicRadioInfoTableIndex
This parameter represents the index for the sysLicRadioInfoTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.2.1.3.14.1.1
sysLicRadioCompID
This parameter represents the component ID for the radio(s).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.2.1.3.14.1.2
sysLicRadiovariantID
This parameter represents the variant ID for the radio(s).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.2.1.3.14.1.3
sysLicRadioAntennaType
This parameter represents the Antenna type supported for the radio(s).
Enumeration
Constraints:
range: 0-32
 .1.3.6.1.4.1.841.1.1.2.1.3.14.1.4
sysLicRadioAntennaMimoType
This parameter represents the Antenna MIMO type for the radio(s).
Enumeration .1.3.6.1.4.1.841.1.1.2.1.3.14.1.5

mgmtSnmpAccessTable

table
.1.3.6.1.4.1.841.1.1.2.2.3 · 1 row entry · 1 columns
Open in standard view 
This table holds the objects of the mgmtSnmpAccessTable.
mgmtSnmpAccessTableEntry entry .1.3.6.1.4.1.841.1.1.2.2.3.1
This parameter represents the entry for the mgmtSnmpAccessTable.
Indexes
wirelessIfStaStatsTableIndex wirelessIfStaStatsTableSecIndex
Column Syntax OID
mgmtSnmpAccessTableIndex
This parameter represents the index for the mgmtSnmpAccessTable and this
is not-accessible.
Unsigned32
Constraints:
range: 1-16
 .1.3.6.1.4.1.841.1.1.2.2.3.1.1

mgmtSnmpTrapHostTable

table
.1.3.6.1.4.1.841.1.1.2.2.4 · 1 row entry · 5 columns
Open in standard view 
This table contains the destination IP address and community password 
for the trap delivery.
mgmtSnmpTrapHostTableEntry entry .1.3.6.1.4.1.841.1.1.2.2.4.1
This parameter represents the entry for the mgmtSnmpTrapHostTable.
Indexes
No indexes recorded
Column Syntax OID
mgmtSnmpTrapHostTableIndex
This parameter represents the index for SNMP Trap Host table. This table
supports upto 5 rows.
Unsigned32
Constraints:
range: 1-4
 .1.3.6.1.4.1.841.1.1.2.2.4.1.1
mgmtSnmpTrapHostTableIPAddress
This parameter is used to represent the IP address of the management station
that will receive SNMP traps from the device.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.2.2.4.1.2
mgmtSnmpTrapHostTablePassword
This parameter is used to represent the password that is sent with the SNMP
trap messages to allow the host to accept or reject the traps. The trap host
will accept SNMP traps if the sent password matches the host's p…
Passwordr/w
Textual Convention: Password OctetString
Type Constraints:
range: 6..32
 .1.3.6.1.4.1.841.1.1.2.2.4.1.3
mgmtSnmpTrapHostTableComment
This parameter represents the comment for the row in the SNMP Trap Host Table.
OctetStringr/w .1.3.6.1.4.1.841.1.1.2.2.4.1.4
mgmtSnmpTrapHostTableEntryStatus
This parameter is used to configure the row status for the SNMP Trap
Host table.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(create row) -4,
destroy(delete) - 6
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.2.2.4.1.5

mgmtAccessTable

table
.1.3.6.1.4.1.841.1.1.2.7.8 · 1 row entry · 3 columns
Open in standard view 
This table provides the facility to allow the traffic from a particular
machine identified by the IP address.
mgmtAccessTableEntry entry .1.3.6.1.4.1.841.1.1.2.7.8.1
This parameter represents the entry for the Management Access Table. It can hold a
maximum of 5 entries.
Indexes
No indexes recorded
Column Syntax OID
mgmtAccessTableIndex
This parameter represents the index of the Management Access Table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.2.7.8.1.1
mgmtAccessTableIpAddress
This parameter holds the IP address of the machine to which traffic need to be
allowed.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.2.7.8.1.2
mgmtAccessTableEntryStatus
This parameter represents the entry status for the Management Access Table.
It can be configured as
active(enable) -1,
notInService(disable) - 2,
createAndGo(create row…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.2.7.8.1.3

syslogHostTable

table
.1.3.6.1.4.1.841.1.1.3.1.4 · 1 row entry · 5 columns
Open in standard view 
This table contains the syslog configurations.
syslogHostTableEntry entry .1.3.6.1.4.1.841.1.1.3.1.4.1
This parameter represents the entry for the syslogHostTable.
Indexes
No indexes recorded
Column Syntax OID
syslogHostTableIndex
This parameter is used to index the syslogHostTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.1.4.1.1
syslogHostIpAddress
This parameter is used to represent the IP address for which syslog messages
to be sent.
SNMPv2-SMIIpAddressr/w
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.3.1.4.1.2
syslogHostPort
This parameter is used to represents the host port number for which the syslog
messages are sent.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.1.4.1.3
syslogHostComment
This parameter displays the comment for the host port of the syslog table.
OctetStringr/w .1.3.6.1.4.1.841.1.1.3.1.4.1.4
syslogHostTableEntryStatus
This parameter is used to configue the status of the Syslog host entry table.
A maximum of 5 entries can be added to this table.
It can be configured as
active(enable) -1,
notInService(…
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.841.1.1.3.1.4.1.5

wirelessIfStaStatsTable

table
.1.3.6.1.4.1.841.1.1.3.4.1.1 · 1 row entry · 51 columns
Open in standard view 
This table contains wireless stations statistics.
wirelessIfStaStatsTableEntry entry .1.3.6.1.4.1.841.1.1.3.4.1.1.1
This parameter represents the entry for wirelessIfStaStatsTable.
This is indexed by interface and VAP numbers.
Indexes
No indexes recorded
Column Syntax OID
wirelessIfStaStatsTableIndex
This parameter represents the index for the wirelessIfStaStatsTable.
Unsigned32 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.1
wirelessIfStaStatsTableSecIndex
This parameter is user defined represents the index of the
stations statistics wireless interface table. This table
is limited to 255 entries.
Unsigned32 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.2
wirelessIfStaStatsIfNumber
This parameter represents the number of the station statistics
for wireless interface table. You can configure up to 2 entries.
Unsigned32 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.3
wirelessIfStaStatsVAPNumber
The parameter represents the VAP that can be configured for
wireless interface. You can configure up to 4.
Unsigned32 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.4
wirelessIfStaStatsMACAddress
This parameter represents the MAC address of the station for
wireless interface for which the statistics are gathered.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.5
wirelessIfStaStatsRxMgmtFrames
This parameter represents the Management frames that are recevied..
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.6
wirelessIfStaStatsRxControlFrames
This parameter represnets the control frames that are recevied.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.7
wirelessIfStaStatsRxUnicastFrames
This parameter represents the unicast frames that are recevied.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.8
wirelessIfStaStatsRxMulticastFrames
This parameter represents the multicast frames that are recevied.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.9
wirelessIfStaStatsRxBytes
This parameter represents the number of bytes received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.10
wirelessIfStaStatsRxBeacons
This parameter represents the number of beacons received.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.11
wirelessIfStaStatsRxProbeResp
This parameter represents the number of probe requests recevied.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.12
wirelessIfStaStatsRxDupFrames
This parameter represents the duplicate frames recevied.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.13
wirelessIfStaStatsRxNoPrivacy
This parameter represents the no privacy information recevied.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.14
wirelessIfStaStatsRxWepFail
This parameter represents the failed WEP information recevied.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.15
wirelessIfStaStatsRxDeMicFail
This parameter represents the failed deMIC information recevied.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.16
wirelessIfStaStatsRxDecapFailed
This parameter represents the failed decapulation information
recevied.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.17
wirelessIfStaStatsRxDefragFailed
This parameter represents the failed defragmentation information
recevied.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.18
wirelessIfStaStatsRxDisassociationFrames
This parameter represents the disassociated frames that are
recevied.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.19
wirelessIfStaStatsRxDeauthenticationFrames
This parameter represents the deauthenticated frames that
are recevied.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.20
wirelessIfStaStatsRxDecryptFailedOnCRC
This parameter represents the decrypt information failed on CRC
recevied.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.21
wirelessIfStaStatsRxUnauthPort
This parameter represents the unauthorized port information recevied.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.22
wirelessIfStaStatsRxUnencrypted
This parameter represents the unencrypted information recevied.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.23
wirelessIfStaStatsTxDataFrames
This parameter represents the data frames that are transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.24
wirelessIfStaStatsTxMgmtFrames
This parameter represents the management frames that are transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.25
wirelessIfStaStatsTxUnicastFrames
This parameter represents the number of unicast frames from
the station that are further transmitted either by the
bridge/router or by the internal host.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.26
wirelessIfStaStatsTxMulticastFrames
This parameter represents the number of multicast frames from
the station that are further transmitted either by the bridge/router
or by the internal host.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.27
wirelessIfStaStatsTxBytes
This parameter represents the number of bytes from the station
that are further transmitted either by the bridge/router or by
the internal host.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.28
wirelessIfStaStatsTxProbeReq
This parameter represents the number of transmitted probe request
from the station either by the bridge/router or by internal host.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.29
wirelessIfStaStatsTxEospLost
This parameter represents the end of service period.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.30
wirelessIfStaStatsTxPSDiscard
This parameter displays the power save mode.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.31
wirelessIfStaStatsTxAssociationFrames
This parameter represents the number of associated frames
transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.32
wirelessIfStaStatsTxAssociationFailedFrames
This parameter represents the number of the failed associated
frames transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.33
wirelessIfStaStatsTxAuthenticationFrames
This parameter represents the number of the authentication
frames transmitted.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.34
wirelessIfStaStatsTxAuthenticationFailed
This parameter represents the failed authentication frames.
SNMPv2-SMICounter32
Constraints:
range: -102--10
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.35
wirelessIfStaStatsTxDeAuthFrames
This parameter represents the deauthorized frames transmitted.
SNMPv2-SMICounter32
Constraints:
range: -102--10
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.36
wirelessIfStaStatsTxDeAuthCode
This parameter represents the deauthorized code transmitted.
SNMPv2-SMICounter32
Constraints:
range: -102--10
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.37
wirelessIfStaStatsTxDisassociation
This parameter represents the disassociation information
transmitted.
SNMPv2-SMICounter32
Constraints:
range: -102--10
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.38
wirelessIfStaStatsTxDisassociationCode
This parameter representd the disassociation code transmitted.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.39
wirelessIfStaStatsFrequency
This parameter represents the frequency on which the station is
operating.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.40
wirelessIfStaStatsState
This parameter represents the present state of the station.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.41
wirelessIfStaStatsRSSI
This parameter represents the RSSI (received signal strength) of the station.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.42
wirelessIfStaStatsTxRate
This parameter represents the transmission rate of the station.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.43
wirelessIfStaStatsAuthenAlgorithm
This parameter represents the authentication alogorithm used for the station.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.44
wirelessIfStaStatsAssociationID
This parameter represents the association ID of the station.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.45
wirelessIfStaStatsVlanTag
This parameter represents the VLAN tag of the station.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.46
wirelessIfStaStatsAssocationTime
This parameter represents the association time of the station.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.47
wirelessIfStaStatsTxPower
This parameter represents the transmission power of the station.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.48
wirelessIfStaStatsInactivityTimer
This parameter represents the inactivity time of the station.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.49
wirelessIfStaStatsStationOperatingMode
This parameter represents the wireless operating mode of station.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.50
wirelessIfStaStatsHTCapability
This parameter represents the HT (high throughput) capability in 11n mode.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.1.1.51

wirelessIfWORPStaStatsTable

table
.1.3.6.1.4.1.841.1.1.3.4.1.2 · 1 row entry · 40 columns
Open in standard view 
This table contains WORP stations statistics.
wirelessIfWORPStaStatsTableEntry entry .1.3.6.1.4.1.841.1.1.3.4.1.2.1
This parameter represents an entry in the WORP Interface
Satellite Statistics Table.
Indexes
No indexes recorded
Column Syntax OID
wirelessIfWORPStaStatsTableIndex
This parameter represents the table index for Station Stats Table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.1
wirelessIfWORPStaStatsMacAddress
This parameter represents the MAC address of the satellite
for which the statistics are gathered.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.2
wirelessIfWORPStaStatsSatelliteName
This parameter identifies the name of the base unit being tested with.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.3
wirelessIfWORPStaStatsAverageLocalSignal
The current signal level calculated over all inbound packets.
This variable indicates the running average of the local signal
level using the algorithm (3/4*oldvalue + 1/4*newvalue).
Integer32 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.4
wirelessIfWORPStaStatsAverageLocalNoise
The current noise level calculated over all inbound packets.
This variable indicates the running average of the local noise
level using the algorithm (3/4*oldvalue + 1/4*newvalue).
Integer32 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.5
wirelessIfWORPStaStatsAverageRemoteSignal
The current remote signal level calculated over the inbound
packets send by this station. This variable indicates the
running average over all registered stations of the remote
signal level using the algorithm (3/4*…
Integer32 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.6
wirelessIfWORPStaStatsAverageRemoteNoise
The current average remote noise level calculated over the
inbound packets send by this station. This variable indicates
the running average over all registered stations of the remote
noise level using the algorithm…
Integer32 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.7
wirelessIfWORPStaStatsRequestForService
The number of requests for service sent (satellite) or
received (base).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.8
wirelessIfWORPStaStatsPollData
The number of polls with data sent (base) or received
(satellite).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.9
wirelessIfWORPStaStatsPollNoData
The number of polls with no data sent (base) or received
(satellite).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.10
wirelessIfWORPStaStatsReplyData
The number of poll replies with data sent (satellite) or
received (base). This counter does not include replies with the
MoreData flag set (see ReplyMoreData).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.11
wirelessIfWORPStaStatsReplyNoData
The number of poll replies with no data sent (satellite) or
received (base).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.12
wirelessIfWORPStaStatsSendSuccess
The number of data packets sent that were acknowledged and did
not need a retransmit.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.13
wirelessIfWORPStaStatsSendRetries
The number of data packets sent that needed retransmition but
were finally received succesfully by the remote partner.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.14
wirelessIfWORPStaStatsSendFailures
The number of data packets sent that were (finally) not received
succesfully by the remote partner.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.15
wirelessIfWORPStaStatsReceiveSuccess
The number of data packets received that were acknowledged and
did not need a retransmit of the remote partner.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.16
wirelessIfWORPStaStatsReceiveRetries
The number of data packets received that needed retransmition by
the remote partner but were finally received succesfully.
SNMPv2-SMICounter32
Enumerated Values:
1notApplicable
2balanced
3notBalanced
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.17
wirelessIfWORPStaStatsReceiveFailures
The number of data packets that were (finally) not received
succesfully.
SNMPv2-SMICounter32
Enumerated Values:
1notApplicable
2balanced
3notBalanced
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.18
wirelessIfWORPStaStatsPollNoReplies
The number of times a poll was sent but no reply was received.
This parameter only applies to the base.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.19
wirelessIfWORPStaStatsLocalTxRate
This parameter represents the Transmit Data Rate of the BSU.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.20
wirelessIfWORPStaStatsRemoteTxRate
This parameter represents the Transmit Data Rate of the SU
which is registered to this SU.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.21
wirelessIfWORPStaBridgePort
This parameter represents the port number of the bridge for which
this station is connected.
SNMPv2-SMIUnsigned32
Constraints:
range: -102--10
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.22
wirelessIfWORPStaStatsAverageLocalSNR SNMPv2-SMIUnsigned32
Constraints:
range: -102--10
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.23
wirelessIfWORPStaStatsAverageRemoteSNR SNMPv2-SMIUnsigned32
Constraints:
range: -102--10
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.24
wirelessIfWORPStaStatsLocalMimoCtrlSig1 SNMPv2-SMIInteger32
Constraints:
range: -102--10
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.25
wirelessIfWORPStaStatsLocalMimoCtrlSig2 SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.26
wirelessIfWORPStaStatsLocalMimoCtrlSig3 SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.27
wirelessIfWORPStaStatsLocalMimoNoise SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.28
wirelessIfWORPStaStatsLocalMimoCtrlSNR1 SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.29
wirelessIfWORPStaStatsLocalMimoCtrlSNR2 SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.30
wirelessIfWORPStaStatsLocalMimoCtrlSNR3 SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.31
wirelessIfWORPStaStatsRemoteMimoCtrlSig1 SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.32
wirelessIfWORPStaStatsRemoteMimoCtrlSig2 SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.33
wirelessIfWORPStaStatsRemoteMimoCtrlSig3 SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.34
wirelessIfWORPStaStatsRemoteMimoNoise SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.35
wirelessIfWORPStaStatsRemoteMimoCtrlSNR1 SNMPv2-SMIUnsigned32
Enumerated Values:
1none
2noMoreAllowed
3incorrectParameter
4roaming
5timeout
6lowQuality
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.36
wirelessIfWORPStaStatsRemoteMimoCtrlSNR2 SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.37
wirelessIfWORPStaStatsRemoteMimoCtrlSNR3 SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.1.2.1.38
wirelessIfWORPStaStatsLocalChainBalStatus
When this parameter indicates the local chain balance status.
Enumeration .1.3.6.1.4.1.841.1.1.3.4.1.2.1.39
wirelessIfWORPStaStatsRemoteChainBalStatus
When this parameter indicates the remote chain balance status.
Enumeration .1.3.6.1.4.1.841.1.1.3.4.1.2.1.40

wirelessIfWORPStatsTable

table
.1.3.6.1.4.1.841.1.1.3.4.2.1 · 1 row entry · 38 columns
Open in standard view 
This table is used to monitor the statistics of interfaces that 
run WORP.
wirelessIfWORPStatsTableEntry entry .1.3.6.1.4.1.841.1.1.3.4.2.1.1
This parameter represents an entry in the WORP Interface
Statistics Table.
Indexes
No indexes recorded
Column Syntax OID
wirelessIfWORPStatsTableIndex
This parameter represents the radio interface for which the WORP statistics
are gathered and index to the wirelessIfWORPStats table.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.1
wirelessIfWORPStatsAverageLocalSignal
This parameter displays the current signal level calculated over all inbound
packets.
Integer32 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.2
wirelessIfWORPStatsAverageLocalNoise
This parameter displays the current noise level calculated over all inbound packets.
Integer32 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.3
wirelessIfWORPStatsAverageRemoteSignal
This parameter displays the current signal level calculated over the inbound packets
received at the peer end.
Integer32 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.4
wirelessIfWORPStatsAverageRemoteNoise
This parameter displays the current noise level calculated over the inbound packets
received at the peer end.
Integer32 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.5
wirelessIfWORPStatsRemotePartners
This parameter displays the number of remote partners. For a satellite, this parameter
will always be zero or one.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.6
wirelessIfWORPStatsBaseStationAnnounces
This parameter displays the number of Announcement messages sent (base) or received
(satellite) on WORP interface
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.7
wirelessIfWORPStatsRequestForService
This parameter displays the number of requests for service messages sent (satellite)
or received (base).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.8
wirelessIfWORPStatsRegistrationRequests
This parameter displays the number of registration request messages sent (satellite)
or received (base) on WORP interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.9
wirelessIfWORPStatsRegistrationRejects
This parameter displays the number of registration reject messages sent (base)
or received (satellite) on WORP interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.10
wirelessIfWORPStatsAuthenticationRequests
This parameter displays the number of authentication request messages sent
(satellite) or received (base) on WORP interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.11
wirelessIfWORPStatsAuthenticationConfirms
This parameter displays the number of authentication confirm messages sent
(base) or received (satellite) on WORP interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.12
wirelessIfWORPStatsRegistrationAttempts
This parameter represents the number of times a Registration Attempt has been
initiated.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.13
wirelessIfWORPStatsRegistrationIncompletes
This parameter represents the number of registration attempts that is not
completed yet.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.14
wirelessIfWORPStatsRegistrationTimeouts
This parameter represents the number of times the registration procedure
timed out.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.15
wirelessIfWORPStatsRegistrationLastReason
This parameter represents the reason for why the last registration was aborted
or failed.
Enumeration .1.3.6.1.4.1.841.1.1.3.4.2.1.1.16
wirelessIfWORPStatsPollData
This parameter represents the number of polls with data messages sent
(base) or received (satellite).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.17
wirelessIfWORPStatsPollNoData
This parameter represents the number of polls with no data messages sent
(base) or received (satellite).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.18
wirelessIfWORPStatsReplyData
This parameter represents the number of poll replies with data
messages sent (satellite) or received (base).
SNMPv2-SMICounter32
Constraints:
range: 1-2
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.19
wirelessIfWORPStatsReplyMoreData
This parameter represents the number of poll replies with more data messages sent
(satellite) or received (base).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.20
wirelessIfWORPStatsReplyNoData
This parameter represents the number of poll replies with no data messages sent
(satellite) or received (base).
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.21
wirelessIfWORPStatsPollNoReplies
This parameter represents the number of times a poll messages were sent but no
reply was received. The parameter in valid only on BSU.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.22
wirelessIfWORPStatsSendSuccess
This parameter displays the number of data messages sent and acknowledged
by the peer successfully.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.23
wirelessIfWORPStatsSendRetries
This parameter displays the number of data messages that are re-transmitted
and acknowledged by the peer successfully.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.24
wirelessIfWORPStatsSendFailures
This parameter displays the number of data messages that requires re-transmission.
These frames are not acknowledged by the peer.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.25
wirelessIfWORPStatsReceiveSuccess
This parameter displays the number of data messages received and acknowledged
successfully.
SNMPv2-SMICounter32
Constraints:
range: 1-1
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.26
wirelessIfWORPStatsReceiveRetries
This parameter displays the number of successfully received re-transmitted data
messages.
SNMPv2-SMICounter32
Enumerated Values:
1start
2stop
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.27
wirelessIfWORPStatsReceiveFailures
This parameter displays the number of data messages that were not received
successfully.
SNMPv2-SMICounter32
Enumerated Values:
1idle
2inProgress
3stopped
4timeOut
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.28
wirelessIfWORPStatsProvisionedUplinkCIR
This parameter provides information about the total assigned (provisioned)
uplink Committed Information Rate(CIR) including all SUs.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.29
wirelessIfWORPStatsProvisionedDownlinkCIR
This parameter provides information about the total assigned (provisioned)
downlink Commtied Information Rate(CIR) including all SUs.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.30
wirelessIfWORPStatsProvisionedUplinkMIR
This parameter provides information about the total assigned (provisioned)
uplink Maximum Information Rate(MIR) including all SUs.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.31
wirelessIfWORPStatsProvisionedDownlinkMIR
This parameter provides information about the total assigned (provisioned) downlink
Maximum Information Rate(MIR) including all SUs.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.32
wirelessIfWORPStatsActiveUplinkCIR
This parameter provides information about the total active uplink Committed Information Rate(CIR).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.33
wirelessIfWORPStatsActiveDownlinkCIR
This parameter provides information about the total active downlink Committed Information Rate(CIR).
SNMPv2-SMIUnsigned32
Enumerated Values:
1enable
2disable
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.34
wirelessIfWORPStatsActiveUplinkMIR
This parameter provides information about the total active uplink Maximum Information Rate(MIR).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.35
wirelessIfWORPStatsActiveDownlinkMIR
This parameter provides information about the total active downlink Maximum Information Rate(MIR).
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.36
wirelessIfWORPStatsCurrentUplinkBandwidth
This parameter provides information about the current bandwidth utilization on the uplink direction.
SNMPv2-SMIUnsigned32
Enumerated Values:
1up
2down
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.37
wirelessIfWORPStatsCurrentDownlinkBandwidth
This parameter provides information about the current bandwidth utilization on the downlink direction.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.2.1.1.38

wirelessIfBlacklistInfoTable

table
.1.3.6.1.4.1.841.1.1.3.4.3.1 · 1 row entry · 5 columns
Open in standard view 
This table shows the blacklisted channel information.
wirelessIfBlacklistInfoTableEntry entry .1.3.6.1.4.1.841.1.1.3.4.3.1.1
This parameter represents an entry in the wireless interface
blacklisted info table.
Indexes
No indexes recorded
Column Syntax OID
wirelessIfBlacklistInfoTableIndex
This parameter is used as index to the wirelessIfBlacklistInfoTable
and represents the radio number.
Unsigned32 .1.3.6.1.4.1.841.1.1.3.4.3.1.1.1
wirelessIfBlacklistInfoTableSecIndex
This parameter is used as secondary index to the wirelessIfBlacklistInfoTable
and represents the channel blacklisted.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.3.1.1.2
wirelessIfBlacklistedChannelNum
This parameter shows the blacklisted channel number.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.3.1.1.3
wirelessIfBlacklistReason
This parameter shows the reason for the channel blacklisting.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.3.4.3.1.1.4
wirelessIfBlacklistTimeElapsed
This parameter shows the time since the channel is blacklisted.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.3.1.1.5

wirelessIfWORPLinkTestConfTable

table
.1.3.6.1.4.1.841.1.1.3.4.4.1 · 1 row entry · 4 columns
Open in standard view 
This table holds the WORP link test configuration parameters.
wirelessIfWORPLinkTestConfTableEntry entry .1.3.6.1.4.1.841.1.1.3.4.4.1.1
This parameter represents the WORP link test conf table entry status.
Indexes
No indexes recorded
Column Syntax OID
wirelessIfWORPLinkTestConfTableIndex
This parameter represents the index for the WORP link test conf table.
Unsigned32 .1.3.6.1.4.1.841.1.1.3.4.4.1.1.1
wirelessIfWORPLinkTestExploreStatus
This parameter is used to start/stops WORP link test.
Enumerationr/w .1.3.6.1.4.1.841.1.1.3.4.4.1.1.2
wirelessIfWORPLinkTestProgressStatus
This parameter shows the progress of the WORP link test.
Enumeration .1.3.6.1.4.1.841.1.1.3.4.4.1.1.3
wirelessIfWORPLinkTestIdleTimeout
The value of this parameter determines the time (in seconds) that a
link test will continue without any SNMP requests for a Link Test
Table entry. When the time expires the Link Test Table is
cleared.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.4.1.1.4

wirelessIfWORPLinkTestStatsTable

table
.1.3.6.1.4.1.841.1.1.3.4.4.5 · 1 row entry · 24 columns
Open in standard view 
This table contains the information for the stations currently 
associated with the access point.
wirelessIfWORPLinkTestStatsTableEntry entry .1.3.6.1.4.1.841.1.1.3.4.4.5.1
This parameter represents the entry in the Remote Link Test table.
Indexes
No indexes recorded
Column Syntax OID
wirelessIfWORPLinkTestStatsTableIndex
This parameter represents a unique value for each station. The
value for each station must remain constant at least from one
explore to the next.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.1
wirelessIfWORPLinkTestStatsTableSecIndex
This parameter represents a unique value for each station. The
value for each station must remain constant at least from one
explore to the next.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.2
wirelessIfWORPLinkTestStatus
When this parameter is set to 2 the device will initiate a link test
sequence with this station.
Enumerationr/w .1.3.6.1.4.1.841.1.1.3.4.4.5.1.3
wirelessIfWORPLinkTestStationName
This parameter identifies the name of the station whom which the
link test is being performed.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.4
wirelessIfWORPLinkTestMACAddress
This parameter represents the MAC address that will be mapped to
the IP Address of the station.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.5
wirelessIfWORPLinkTestWORPLinkStatus
This parameter shows the link status of WORP connectivity.
Enumeration .1.3.6.1.4.1.841.1.1.3.4.4.5.1.6
wirelessIfWORPLinkTestLocalCurSignal
The current signal level (in dB) for the link test from this
station. This parameter indicates the running average of the local
signal level using the algorithm (3/4*oldvalue + 1/4*newvalue).
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.7
wirelessIfWORPLinkTestLocalCurNoise
The current noise level (in dB) for the link test to this station.
This parameter indicates the running average of the local noise
level.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.8
wirelessIfWORPLinkTestLocalCurSNR
The current signal to noise ratio for the link test to this
station.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.9
wirelessIfWORPLinkTestLocalMinSignal
The minimum signal level during the link test to this station.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.10
wirelessIfWORPLinkTestLocalMinNoise
The minimum noise level during the link test to this station.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.11
wirelessIfWORPLinkTestLocalMinSNR
The minimum signal to noise ratio during the link test to this
station.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.12
wirelessIfWORPLinkTestLocalMaxSignal
The maximum signal level during the link test to this station.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.13
wirelessIfWORPLinkTestLocalMaxNoise
The maximum noise level during the link test to this station.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.14
wirelessIfWORPLinkTestLocalMaxSNR
The maximum signal to noise ratio during the link test to this
station.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.15
wirelessIfWORPLinkTestRemoteCurSignal
The current signal level for the link test to the remote station
or access point.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.16
wirelessIfWORPLinkTestRemoteCurNoise
The current noise level for the link test to the remote station
or access point device.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.17
wirelessIfWORPLinkTestRemoteCurSNR
The current signal to noise ratio for the link test to the remote
station or access point device.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.18
wirelessIfWORPLinkTestRemoteMinSignal
The minimum signal level during the link test to the remote station
or access point device.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.19
wirelessIfWORPLinkTestRemoteMinNoise
The minimum noise level during the link test to the remote station
or access point device.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.20
wirelessIfWORPLinkTestRemoteMinSNR
The minimum signal to noise ratio during the link test to the
remote station or access point device.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.21
wirelessIfWORPLinkTestRemoteMaxSignal
The maximum signal level during the link test to the remote
station or access point device.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.22
wirelessIfWORPLinkTestRemoteMaxNoise
The maximum noise level during the link test to the remote station
or access point device.
SNMPv2-SMIInteger32
Constraints:
range: 1-16
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.23
wirelessIfWORPLinkTestRemoteMaxSNR
The maximum signal to noise ratio during the link test to the
remote station or access point device.
SNMPv2-SMIInteger32
Constraints:
range: 1-2
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.4.5.1.24

wirelessIfStatsTable

table
.1.3.6.1.4.1.841.1.1.3.4.5.1 · 1 row entry · 16 columns
Open in standard view 
This table holds the statistics for the wireless interface(s).
wirelessIfStatsTableEntry entry .1.3.6.1.4.1.841.1.1.3.4.5.1.1
This parameter represents the entry for the wirelessIfStatsTable.
Indexes
No indexes recorded
Column Syntax OID
wirelessIfStatsTableIndex
This parameter represents the index for the wirelessIfStatsTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.5.1.1.1
wirelessIfStatsTxPkts
This parameter shows the number of transmitted packets from the wireless
interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.5.1.1.2
wirelessIfStatsTxBytes
This parameter shows the number of transmitted bytes from the wireless
interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.841.1.1.3.4.5.1.1.3
wirelessIfStatsRxPkts
This parameter shows the number of received packets from the wireless
interface.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.4.5.1.1.4
wirelessIfStatsRxBytes
This parameter shows the number of received bytes from the wireless
interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.841.1.1.3.4.5.1.1.5
wirelessIfStatsRxDecryptErrors
This parameter shows the number of packets received with decryption errors on
the wireless interface.
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.841.1.1.3.4.5.1.1.6
wirelessIfStatsRxCRCErrors
This parameter shows the number of packets received with CRC errors on the
wireless interface
SNMPv2-SMICounter64
Textual Convention: SNMPv2-SMICounter64 Unsigned64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.841.1.1.3.4.5.1.1.7
wirelessIfStatsChain0CtlRSSI
This parameter shows the control RSSI for the chain/antenna 0.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.5.1.1.8
wirelessIfStatsChain1CtlRSSI
This parameter shows the control RSSI for the chain/antenna 1.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.5.1.1.9
wirelessIfStatsChain2CtlRSSI
This parameter shows the control RSSI for the chain/antenna 2.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.5.1.1.10
wirelessIfStatsChain0ExtRSSI
This parameter shows the Extension RSSI for the chain/antenna 0.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.5.1.1.11
wirelessIfStatsChain1ExtRSSI
This parameter shows the Extension RSSI for the chain/antenna 1
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.5.1.1.12
wirelessIfStatsChain2ExtRSSI
This parameter shows the Extension RSSI for the chain/antenna 2
SNMPv2-SMIInteger32
Constraints:
range: 1-16
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.5.1.1.13
wirelessIfStatsCombinedRSSI
This parameter shows the combined RSSI of the control and extension.
SNMPv2-SMIInteger32
Constraints:
range: 1-2
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.5.1.1.14
wirelessIfStatsPhyErrors
This parameter shows the Physical layer errors.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.5.1.1.15
wirelessIfStatsRadioReTunes
This parameter shows the Number of times the radio is re-tuned.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.4.5.1.1.16

radiusClientAuthStatsTable

table
.1.3.6.1.4.1.841.1.1.3.5.1.1 · 1 row entry · 14 columns
Open in standard view 
This table is used to store RADIUS Authentication Client
Statistics for the configured profiles.
radiusClientAuthStatsTableEntry entry .1.3.6.1.4.1.841.1.1.3.5.1.1.1
This parameter represents an entry in the radiusClientAuthStatsTable.
Note this table is indexed by VAP and Radius Pri/Sec servers
Indexes
No indexes recorded
Column Syntax OID
radiusClientAuthStatsTableIndex
This parameter is user defined parameter and used as an
index for Radius client Authorization status.
Unsigned32 .1.3.6.1.4.1.841.1.1.3.5.1.1.1.1
radiusClientAuthStatsTableSecIndex
This parameter is secondary index to Radius client
Authorisation status, 1 represents the primary server and
2 represents the secondary server.
Unsigned32 .1.3.6.1.4.1.841.1.1.3.5.1.1.1.2
radiusClientAuthStatsRoundTripTime
This parameter represents the round trip time for messages
exchanged between radius client and authentication server
since system startup.
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.1.1.3
radiusClientAuthStatsRequests
This parameter represents the number of RADIUS Access
Requests messages transmitted from the client to the
server since client startup.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.1.1.4
radiusClientAuthStatsRetransmissions
This parameter represents the number of RADIUS Access
Requests retransmitted by the client to the server since
system startup.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.1.1.5
radiusClientAuthStatsAccessAccepts
This parameter indicates the number of RADIUS Access
Accept messages received since system startup.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.1.1.6
radiusClientAuthStatsAccessRejects
This parameter represents the number of RADIUS Access
Rejects messages received since system startup.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.1.1.7
radiusClientAuthStatsAccessChallenges
This parameter represents the number of RADIUS Access
Challenges messages received since system startup.
SNMPv2-SMICounter32
Constraints:
range: 1-32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.1.1.8
radiusClientAuthStatsResponses
This parameter represents the total number of RADIUS
Access messages received from the authentication server
since system startup.
SNMPv2-SMICounter32
Enumerated Values:
1enable
2disable
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.1.1.9
radiusClientAuthStatsMalformedResponses
This parameter represents the number of malformed RADIUS
Access Response messages received since system startup.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.1.1.10
radiusClientAuthStatsBadAuthenticators
This parameter represents the number of malformed RADIUS
Access Response messages containing invalid authenticators
received since system startup.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.1.1.11
radiusClientAuthStatsTimeouts
This parameters represents the total number of timeouts
for RADIUS Access Request messages since system startup.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.1.1.12
radiusClientAuthStatsUnknownTypes
This parameter represents the number of messages with unknown
Radius Message Code since system startup.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.1.1.13
radiusClientAuthStatsPacketsDropped
This parameter represents the number of Radius messages which do
not contain any EAP payloads or EAP State machine do not have
any valid EAP state data since system startup.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.1.1.14

radiusClientAccStatsTable

table
.1.3.6.1.4.1.841.1.1.3.5.1.2 · 1 row entry · 10 columns
Open in standard view 
This table is used to store RADIUS Accounting Client Statistics 
for the configured profiles.
radiusClientAccStatsTableEntry entry .1.3.6.1.4.1.841.1.1.3.5.1.2.1
This parameter represents an entry in the radiusClientAccStatsTable.
Note this table is indexed by VAP and Radius Pri/Sec servers.
Indexes
No indexes recorded
Column Syntax OID
radiusClientAccStatsTableIndex
This parameter is used as an index to the RADIUS Accounting
Client Statistics Table.
Unsigned32 .1.3.6.1.4.1.841.1.1.3.5.1.2.1.1
radiusClientAccStatsTableSecIndex
This parameter is used as secondary index to the RADIUS
Accounting Client Statistics Table, which is used to indicate
primary and secondary/backup server statistics, 1 represents
the Primary server and 2 represents t…
Unsigned32
Enumerated Values:
1registered
2not-Registered
 .1.3.6.1.4.1.841.1.1.3.5.1.2.1.2
radiusClientAccStatsRoundTripTime
This parameter represents the round trip time for messages
exchanged between radius client and authentication server
since system startup .
SNMPv2-SMITimeTicks
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.2.1.3
radiusClientAccStatsRequests
This parameter represents the number of RADIUS Accounting
Requests messages transmitted from the client to the server
since client startup.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.2.1.4
radiusClientAccStatsRetransmissions
This parameter represents the number of RADIUS Accounting
Requests retransmitted by the client to the server since
system startup.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.2.1.5
radiusClientAccStatsResponses
This parameter indicates the number of RADIUS Accounting
Response messages received since system startup.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.2.1.6
radiusClientAccStatsMalformedResponses
This parameter represents the number of malformed RADIUS
Access Response messages received since system startup.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.2.1.7
radiusClientAccStatsTimeouts
This parameter represents the total number of timeouts for
RADIUS Accounting Response messages since the system startup.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.2.1.8
radiusClientAccStatsUnknownTypes
This parameter represents the number of messages with unknown
Radius Message Code since system startup.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.2.1.9
radiusClientAccStatsPacketsDropped
This parameter represents the number of Radius messages which
do not contain any EAP payloads or EAP State machine do not
have any valid EAP state data since system startup.
SNMPv2-SMICounter32
Textual Convention: SNMPv2-SMICounter32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.5.1.2.1.10

worpSiteSurveyOperationTable

table
.1.3.6.1.4.1.841.1.1.3.7.1.1 · 1 row entry · 3 columns
Open in standard view 
This table contains the information about all the BSU which all
are visible for this SU.
worpSiteSurveyOperationTableEntry entry .1.3.6.1.4.1.841.1.1.3.7.1.1.1
This parameter represents the entry in the worpSiteSurvey operation table.
Indexes
No indexes recorded
Column Syntax OID
worpSiteSurveyOperationTableIndex
This parameter represents the index to the worpSiteSurveyOperationTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.1.1.1
worpSiteSurveyOperationIfName
This parameter shows the wireless interface name for which site survey
parameters are shown.
OctetString .1.3.6.1.4.1.841.1.1.3.7.1.1.1.2
worpSiteSurveyOperationStatus
This parameter is used enable/disable the site survey operation.
Enumerationr/w .1.3.6.1.4.1.841.1.1.3.7.1.1.1.3

worpSiteSurveyTable

table
.1.3.6.1.4.1.841.1.1.3.7.1.2 · 1 row entry · 35 columns
Open in standard view 
This table contains the information about all the BSU which all
are visible for this SU.
worpSiteSurveyTableEntry entry .1.3.6.1.4.1.841.1.1.3.7.1.2.1
This parameter represents the entry in the worpSiteSurvey table.
Indexes
No indexes recorded
Column Syntax OID
worpSiteSurveyTableIndex
This parameter represents te index to the worpSiteSurveyTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.1
worpSiteSurveyTableSecIndex
This parameter represents te index to the worpSiteSurveyTable.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.2
worpSiteSurveyBaseMACAddress
This parameter represents the MAC address of the BSU.
SNMPv2-TCPhysAddress
Textual Convention: SNMPv2-TCPhysAddress OctetString
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.3
worpSiteSurveyBaseName
This parameter represents the name of the BSU.
SNMPv2-TCDisplayString
Textual Convention: SNMPv2-TCDisplayString OctetString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.4
worpSiteSurveyMaxSatellitesAllowed
This parameter represents the maximum number of satellites
allowed to register with this BSU.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.5
worpSiteSurveyNumSatellitesRegistered
This parameter represents the number of satellites currently
registered on this BSU.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.6
worpSiteSurveySatelliteRegisteredStatus
This parameter represents the registration status of this satellite on the BSU.
Enumeration .1.3.6.1.4.1.841.1.1.3.7.1.2.1.7
worpSiteSurveyLocalTxRate
This parameter represents the transmission rate of the SU. This field is not
valid if the registration status is Not-Registered
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.8
worpSiteSurveyRemoteTxRate
This parameter represents the transmission rate of the BSU. This field is
not valid if the registration status is Not-Registered
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.9
worpSiteSurveyLocalSignalLevel
This parameter displays the current signal level of the incoming wireless
frames from this BSU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.10
worpSiteSurveyLocalNoiseLevel
This parameter displays the current noise level of the incoming wireless
frames from this BSU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.11
worpSiteSurveyLocalSNR
This parameter represents the current Local SNR.
SNMPv2-SMIUnsigned32
Enumerated Values:
1notApplicable
2balanced
3notBalanced
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.12
worpSiteSurveyRemoteSignalLevel
This parameter displays the current signal level of the incoming wireless
frames at BSU. This field is not valid if the registration status is
Not-Registered
SNMPv2-SMIInteger32
Enumerated Values:
1notApplicable
2balanced
3notBalanced
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.13
worpSiteSurveyRemoteNoiseLevel
This parameter displays the current noise level of the incoming wireless
frames at BSU. This field is not valid if the registration status is
Not-Registered.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.14
worpSiteSurveyRemoteSNR
This parameter represents the current SNR at BSU. This field is not valid
if the registration status is Not-Registered
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.15
worpSiteSurveyChannel
This parameter represents the channel at which the BSU is operating.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.16
worpSiteSurveyChannelBandwidth
This parameter represents the BSU channel bandwidth.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.17
worpSiteSurveyChannelRxRate
This parameter represents the Rx rate of BSU.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.18
worpSiteSurveyBaseBridgePort
This parameter represents the SU's Bridge port for which BSU is connected.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.19
worpSiteSurveyLocalMimoCtrlSig1
This parameter represents the Rx rate of BSU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.20
worpSiteSurveyLocalMimoCtrlSig2
This parameter represents the Rx rate of BSU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.21
worpSiteSurveyLocalMimoCtrlSig3
This parameter represents the Rx rate of BSU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.22
worpSiteSurveyLocalMimoNoise
This parameter represents the Rx rate of BSU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.23
worpSiteSurveyLocalMimoCtrlSNR1
This parameter represents the Rx rate of BSU.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.24
worpSiteSurveyLocalMimoCtrlSNR2
This parameter represents the Rx rate of BSU.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.25
worpSiteSurveyLocalMimoCtrlSNR3
This parameter represents the Rx rate of BSU.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.26
worpSiteSurveyRemoteMimoCtrlSig1
This parameter represents the Rx rate of BSU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.27
worpSiteSurveyRemoteMimoCtrlSig2
This parameter represents the Rx rate of BSU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.28
worpSiteSurveyRemoteMimoCtrlSig3
This parameter represents the Rx rate of BSU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.29
worpSiteSurveyRemoteMimoNoise
This parameter represents the Rx rate of BSU.
SNMPv2-SMIInteger32
Textual Convention: SNMPv2-SMIInteger32 Integer32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.30
worpSiteSurveyRemoteMimoCtrlSNR1
This parameter represents the Rx rate of BSU.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.31
worpSiteSurveyRemoteMimoCtrlSNR2
This parameter represents the Rx rate of BSU.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.32
worpSiteSurveyRemoteMimoCtrlSNR3
This parameter represents the Rx rate of BSU.
SNMPv2-SMIUnsigned32
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.7.1.2.1.33
worpSiteSurveyLocalChainBalStatus
When this parameter indicates the local chain balance status.
Enumeration .1.3.6.1.4.1.841.1.1.3.7.1.2.1.34
worpSiteSurveyRemoteChainBalStatus
When this parameter indicates the remote chain balance status.
Enumeration .1.3.6.1.4.1.841.1.1.3.7.1.2.1.35

igmpEth1MCastTable

table
.1.3.6.1.4.1.841.1.1.3.10.1.1 · 1 row entry · 4 columns
Open in standard view 
This table holds the IGMP multicast IP and MAC address details for 
the ethernet interface 1
igmpEth1MCastTableEntry entry .1.3.6.1.4.1.841.1.1.3.10.1.1.1
This parameter represents the entry for this table.
Indexes
No indexes recorded
Column Syntax OID
igmpEth1MCastTableIndex
This parameter represents the index for this table.
SNMPv2-SMIUnsigned32
Constraints:
range: 0-8
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.10.1.1.1.1
igmpEth1MCastGrpIp
This parameter indicates the IP multicast address of ethernet interface 1
learned by IGMP snooping.
SNMPv2-SMIIpAddress
Enumerated Values:
1none
2ethernetIntf1
3ethernetIntf2
4bridgeStats
5arpTable
6wirelessIntf1
7wirelessIntf2
8worpIntf1
9worpIntf2
10learnTable
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.3.10.1.1.1.2
igmpEth1MCastGrpMACAddr
This parameter indicates the Mac multicast address of ethernet interface 1
learned by IGMP snooping.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.3.10.1.1.1.3
igmpEth1MCastGrpAgingTimeElapsed
This parameter specifies the aging time for multicast entries for the ethernet
interface 1.
SNMPv2-SMITimeTicks
Constraints:
range: 0-32
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.10.1.1.1.4

igmpEth2MCastTable

table
.1.3.6.1.4.1.841.1.1.3.10.1.2 · 1 row entry · 4 columns
Open in standard view 
This table holds the IGMP multicast IP and MAC address details for 
the ethernet interface 2
igmpEth2MCastTableEntry entry .1.3.6.1.4.1.841.1.1.3.10.1.2.1
This parameter represents the entry for this table.
Indexes
No indexes recorded
Column Syntax OID
igmpEth2MCastTableIndex
This parameter represents the index for this table.
SNMPv2-SMIUnsigned32
Constraints:
range: 0-600
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.10.1.2.1.1
igmpEth2MCastGrpIp
This parameter indicates the IP multicast address of ethernet interface 2
learned by IGMP snooping.
SNMPv2-SMIIpAddress
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.3.10.1.2.1.2
igmpEth2MCastGrpMACAddr
This parameter indicates the Mac multicast address of ethernet interface 2
learned by IGMP snooping.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.3.10.1.2.1.3
igmpEth2MCastGrpAgingTimeElapsed
This parameter specifies the aging time for multicast entries for the ethernet
interface 2.
SNMPv2-SMITimeTicks
Constraints:
range: 0-3600
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.10.1.2.1.4

igmpWireless1MCastTable

table
.1.3.6.1.4.1.841.1.1.3.10.2.1 · 1 row entry · 4 columns
Open in standard view 
This table holds the IGMP multicast IP and MAC address details for 
the wireless interface 1.
igmpWireless1MCastTableEntry entry .1.3.6.1.4.1.841.1.1.3.10.2.1.1
This parameter represents the entry for the wireless multicast table.
Indexes
No indexes recorded
Column Syntax OID
igmpWireless1MCastTableIndex
This parameter represents the index for this table.
SNMPv2-SMIUnsigned32
Enumerated Values:
1enable
2disable
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.10.2.1.1.1
igmpWireless1MCastGrpIp
This parameter indicates the IP multicast address of wireless interface 1
learned by IGMP snooping.
SNMPv2-SMIIpAddress
Enumerated Values:
1enable
2disable
Textual Convention: SNMPv2-SMIIpAddress OctetString
Type Constraints:
range: 4
 .1.3.6.1.4.1.841.1.1.3.10.2.1.1.2
igmpWireless1MCastGrpMACAddr
This parameter indicates the Mac multicast address of wireless interface 1
learned by IGMP snooping.
SNMPv2-TCMacAddress
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.841.1.1.3.10.2.1.1.3
igmpWireless1MCastGrpAgingTimeElapsed
This parameter specifies the aging time for multicast entries for the wireless
interface 1.
SNMPv2-SMITimeTicks
Constraints:
range: 0-7
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.10.2.1.1.4

igmpRouterPortListTable

table
.1.3.6.1.4.1.841.1.1.3.10.3 · 1 row entry · 3 columns
Open in standard view 
This table shows the IGMP router port stats for all interfaces.
igmpRouterPortListTableEntry entry .1.3.6.1.4.1.841.1.1.3.10.3.1
This parameter represents the entry for the router port list table.
Indexes
No indexes recorded
Column Syntax OID
igmpRouterPortListTableIndex
This paramter represents the interface number or index to
this table.
SNMPv2-SMIUnsigned32
Enumerated Values:
1ethernet
2wireless
3allInterfaces
4disable
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.10.3.1.1
igmpRouterPortNumber
This parameter represents the router port number on which IGMP
snooping/listening is done.
SNMPv2-SMIUnsigned32
Enumerated Values:
1passthru
2block
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.10.3.1.2
igmpRouterAgingTimeElapsed
This parameter represents the time elapsed since snooping is started
on the router port.
SNMPv2-SMITimeTicks
Enumerated Values:
1enable
2disable
Textual Convention: SNMPv2-SMITimeTicks Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.841.1.1.3.10.3.1.3