wirelessIfDDRSStatus
PROXIM-MIB ·
.1.3.6.1.4.1.841.1.1.1.1.1.5.1.2
Object
column
r/w
Enumeration
This parameter is used to enable/disable the DDRS feature for the interface.
Context
- MIB
- PROXIM-MIB
- OID
.1.3.6.1.4.1.841.1.1.1.1.1.5.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wirelessIfDDRSTableEntry
- Table
- wirelessIfDDRSTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wirelessIfDDRSTableIndex This parameter represents the index for the DDRS table and indirectly represent the wireless interface index. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.5.1.1 |
| wirelessIfDDRSAggressiveIndex This object specifies the aggressiveness of the ddrs algorithm. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.5.1.10 |
| wirelessIfDDRSChainBalThrld This object specifies the Mimo Chain Balance threshold. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.5.1.11 |
| wirelessIfDDRSRateBackOffInt This object specifies the Rate Backoff Interval. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.5.1.12 |
| wirelessIfDDRSRateBlackListInt This object specifies the Rate Blacklist Interval. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.5.1.13 |
| wirelessIfDDRSDefDataRate This default data rate shall be used as WORP default data rate only when the DDRS is enabled. The rates
defined in wirelessIfWORPTxRate are used as default. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.5.1.3 |
| wirelessIfDDRSMaxDataRate This parameter is used to limit the maximum possible data rate that is set
by DDRS. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.5.1.4 |
| wirelessIfDDRSIncrAvgSNRThrld This parameter is used to specify the average SNR threshold for data rate increase.
The value should be in dB and in the range of 0..50 dB. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.5.1.5 |
| wirelessIfDDRSIncrReqSNRThrld This parameter is to specify minimum required SNR threshold for data rate increase.
The value should be in dB and in the range 0..50 dB. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.5.1.6 |
| wirelessIfDDRSDecrReqSNRThrld This parameter is to specify minimum required SNR threshold for data rate decrease.
The value should be in dB and in the range 0..50 dB. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.5.1.7 |
| wirelessIfDDRSIncrReTxPercentThrld This object specifies the threshold percentage of retransmissions for
DDRS data rate increase. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.5.1.8 |
| wirelessIfDDRSDecrReTxPercentThrld This object specifies the threshold percentage of retransmissions for
DDRS data rate decrease. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.5.1.9 |