wirelessIfWORPNetworkName
PROXIM-MIB ·
.1.3.6.1.4.1.841.1.1.1.1.1.4.1.4
Object
column
r/w
OctetString
This parameter represents the name of the Network of the WORP Interface.
Context
- MIB
- PROXIM-MIB
- OID
.1.3.6.1.4.1.841.1.1.1.1.1.4.1.4- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wirelessIfWORPTableEntry
- Table
- wirelessIfWORPTable
- Siblings
- 22
Syntax
OctetString
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wirelessIfWORPTableIndex This parameter represents the radio for which the WORP is enabled
and index to the wirelessIfWORPTable. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.1 |
| wirelessIfWORPRegistrationTimeout This parameter represents the registration procedure timeout period for WORP
interface. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.11 |
| wirelessIfWORPRetries This parameter represents the number of times the same worp frame need to be
re-Transmitted, if it is not acknowledged by the peer. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.12 |
| wirelessIfWORPTxRate This parameter represents the WORP interface transmission rate. Please check the
object wirelessIfWORPSupportedTxRate for supported rates. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.13 |
| wirelessIfWORPSupportedTxRate This parameter displays the supported transmission rate based on
Channel Bandwdith, Guard Interval and Number of Spacial Streams
configuration. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.14 |
| wirelessIfWORPInputBandwidthLimit This parameters represents the Bandwidth limit on Input direction.
Default limit & maximum limit are based on the license file. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.15 |
| wirelessIfWORPOutputBandwidthLimit This parameter represents the Bandwidth limit on Output direction.
Default limit & maximum limit are based on the license file. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.16 |
| wirelessIfWORPBandwidthLimitType This parameter represents the bandwidth limit type - shaping or policing. | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.17 |
| wirelessIfWORPSecurityProfileIndex This parameter allows to configure the Security profile for
the WORP interface based on the index of the profile name
and this is Valid only on BSU. | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.18 |
| wirelessIfWORPRadiusProfileIndex This parameter allows to configure the Radius profile for
the WORP interface based on the index of the profile
name and this is Valid only on BSU.. | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.19 |
| wirelessIfWORPMode This parameter displays the worp mode of operation. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.2 |
| wirelessIfWORPMACACLStatus This parameter is used to enable or disable the MAC access control list.
This configuration is Valid only on BSU. | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.20 |
| wirelessIfWORPRadiusMACACLStatus This parameter is used to enable or disable the MAC ACL for Radius Profiles.
This configuration is Valid only on BSU. | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.21 |
| wirelessIfWORPRadiusAccStatus This parameter is used to enable or disable the Radius Accounting Stats capture.
This configuration is Valid only on BSU and currently this is not accessible. | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.22 |
| wirelessIfWORPIntfMacAddress This parameter represents the MAC address of the wireless interface card. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.23 |
| wirelessIfWORPAutoMultiFrameBursting This parameter enables WORP protocol to allow each side, BSU or SU, to send
a burst of multiple data messages based on QOS priority instead
of a single data message. | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.24 |
| wirelessIfWORPBaseStationName This parameter represents the name of the BSU for which it can
register. This configuration is valid only on SU. If this
field is empty then SU is allowed to register with any B… | column | OctetString | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.3 |
| wirelessIfWORPMaxSatellites This parameter represents the maximum number of SUs allowed to register on
this BSU. This configuration is valid only on BSU. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.5 |
| wirelessIfWORPMTU This parameter represents to maximum size of a frame sent from the WORP interface. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.6 |
| wirelessIfWORPSuperPacketing This parameter represents the status of bundling multiple ethernet frames in one
single WORP Jumbo frame | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.7 |
| wirelessIfWORPSleepMode This parameter represents the status of sleep mode. This Configuration is valid
only on BSU. If there is no data available to transfer b/w BSU & SU, BSU
will keep the SU state … | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.8 |
| wirelessIfWORPMultiFrameBursting This parameter enables WORP protocol to allow each side, BSU or SU, to send
a burst of multiple data messages instead of a single data message. | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.9 |