wirelessIfVAPVLANPriority
PROXIM-MIB ·
.1.3.6.1.4.1.841.1.1.1.1.1.3.1.11
Object
column
r/w
Unsigned32
This parameter is used to configure the VLAN priority for Wireless VAP. By default the value is set to 0.
Context
- MIB
- PROXIM-MIB
- OID
.1.3.6.1.4.1.841.1.1.1.1.1.3.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wirelessIfVAPTableEntry
- Table
- wirelessIfVAPTable
- Siblings
- 15
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 64-307200
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wirelessIfVAPTableIndex This parameter is used to configure the wireless VAP table. Select
1 represents Wifi0 (radio-0) and
2 represents Wifi1 (radio-1). | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.3.1.1 |
| wirelessIfVAPVLANID This parameter is used to represent the VLAN ID for the wireless VAP.
Select any value between 1 - 4094 to tag the VLAN ids and -1 to untag
the VLAN ids. | column | VlanId | .1.3.6.1.4.1.841.1.1.1.1.1.3.1.10 |
| wirelessIfVAPQoSProfileName This parameter is used to configure the profile name for the Wireless VAP QoS. | column | OctetString | .1.3.6.1.4.1.841.1.1.1.1.1.3.1.12 |
| wirelessIfVAPMACACLStatus This parameter is used to enable or disable the MAC access control list. | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.3.1.13 |
| wirelessIfVAPRadiusMACACLStatus This parameter is used to enable or disable the MAC ACL for Radius Profiles | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.3.1.14 |
| wirelessIfVAPRadiusAccStatus This parameter is used to enable or disable the Radius Accounting Stats capture. | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.3.1.15 |
| wirelessIfVAPStatus This parameter is used to configure the status of the VAP. Select
1 to enable the VAP,
2 to disable the VAP and
3 to delete the VAP. | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.3.1.16 |
| wirelessIfVAPTableSecIndex This parameter represents the VAPs and used as secondary index to this
table. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.3.1.2 |
| wirelessIfVAPType This parameter is used to configure the type of VAP. Select
1 for AP. | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.3.1.3 |
| wirelessIfVAPSSID This parameter is used to represent the wireless card SSID name
(wireless network name). | column | OctetString | .1.3.6.1.4.1.841.1.1.1.1.1.3.1.4 |
| wirelessIfVAPBSSID This parameter represents the MAC address for the VAP BSSID. | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.841.1.1.1.1.1.3.1.5 |
| wirelessIfVAPBroadcastSSID This parameter is used to configure the status of the broadcast
wireless VAP SSID. A single entry in the SSID table can be enabled
to broadcast SSID in beacon messages.
Select
1… | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.3.1.6 |
| wirelessIfVAPFragmentationThreshold This parameter is used to configure the fragmentation threshold
for the wireless VAP. By default, the value is set to 2346. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.3.1.7 |
| wirelessIfVAPSecurityProfileName This parameter allows you to configure the Security profile name
for Wireless VAP. | column | OctetString | .1.3.6.1.4.1.841.1.1.1.1.1.3.1.8 |
| wirelessIfVAPRadiusProfileName This parameter allows you to configure the RADIUS profile name for
Wireless VAP. | column | OctetString | .1.3.6.1.4.1.841.1.1.1.1.1.3.1.9 |