wirelessIf11nPropertiesNumOfSpatialStreams
PROXIM-MIB ·
.1.3.6.1.4.1.841.1.1.1.1.1.2.1.11
Object
column
r/w
Enumeration
This parameter is used to select the number of spatial streams for 11n.
Context
- MIB
- PROXIM-MIB
- OID
.1.3.6.1.4.1.841.1.1.1.1.1.2.1.11- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- wirelessIf11nPropertiesTableEntry
- Table
- wirelessIf11nPropertiesTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wirelessIf11nPropertiesTableIndex This parameter represents index to the wireless interface 11n
table and this represents the wireless radios. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.2.1.1 |
| wirelessIf11nPropertiesRxAntennas This parameter enables the receiving antennas. This is configured
as bit-mask.
Eg: 3 - 011 (binary value) - first and second antennas are enabled.
7 - 111 (binary value) - al… | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.2.1.10 |
| wirelessIf11nPropertiesSupportedTxAntennas This parameter shows the number of supported Tx antennas. | column | OctetString | .1.3.6.1.4.1.841.1.1.1.1.1.2.1.12 |
| wirelessIf11nPropertiesSupportedRxAntennas This parameter shows the number of supported Rx antennas. | column | OctetString | .1.3.6.1.4.1.841.1.1.1.1.1.2.1.13 |
| wirelessIf11nPropertiesAMPDUStatus This parameter is used define the AMPDU status for wireless 11n
interface. Select
1 to enable and
2 to disable the AMPDU status. | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.2.1.2 |
| wirelessIf11nPropertiesAMPDUMaxNumFrames This parameter represents the Agregated MAC Protocol Data Unit
(AMPDU) frames that are transmitted. It can be configured up to 64 frames. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.2.1.3 |
| wirelessIf11nPropertiesAMPDUMaxFrameSize This parameter is used to configure the maximum AMPDU frame size
(in bytes) that can be transmitted. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.2.1.4 |
| wirelessIf11nPropertiesAMSDUStatus This parameter is used define the AMSDU status for wireless 11n
interface. Select
1 to enable and
2 to disable the AMSDU status. | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.2.1.5 |
| wirelessIf11nPropertiesAMSDUMaxFrameSize This parameter shows the maximum AMSDU frame size
(in bytes) that can be transmitted. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.2.1.6 |
| wirelessIf11nPropertiesFrequencyExtension This parameter is used to configure the frequency extension for
the wireless interface. Select
1 to configure the UpperExtensionChannel and
2 to configure the LowerExtensionChan… | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.2.1.7 |
| wirelessIf11nPropertiesGuardInterval This parameter is used to configure the guard interval for the
wireless interface. Select 1 for short guard interval as 400
nano seconds and 2 for full guard interval as 800 nano… | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.2.1.8 |
| wirelessIf11nPropertiesTxAntennas This parameter enables the transmission antennas. This is configured
as bit-mask.
Eg: 3 - 011 (binary value) - first and second antennas are enabled.
7 - 111 (binary value) -… | column | Enumeration | .1.3.6.1.4.1.841.1.1.1.1.1.2.1.9 |
Indexes
| Object | Type | Syntax | OID |
|---|---|---|---|
| wirelessIfWORPTableIndex This parameter represents the radio for which the WORP is enabled
and index to the wirelessIfWORPTable. | column | Unsigned32 | .1.3.6.1.4.1.841.1.1.1.1.1.4.1.1 |