wirelessIfWORPStatsSendRetries
PROXIM-MIB ·
.1.3.6.1.4.1.841.1.1.3.4.2.1.1.24
Object
column
SNMPv2-SMICounter32
This parameter displays the number of data messages that are re-transmitted and acknowledged by the peer successfully.
Context
- MIB
- PROXIM-MIB
- OID
.1.3.6.1.4.1.841.1.1.3.4.2.1.1.24- Type
- column
- Access
- readonly
- Status
- current
- Parent
- wirelessIfWORPStatsTableEntry
- Table
- wirelessIfWORPStatsTable
- Siblings
- 37
Syntax
SNMPv2-SMICounter32
- Source
- SNMPv2-SMICounter32
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| wirelessIfWORPStatsTableIndex This parameter represents the radio interface for which the WORP statistics
are gathered and index to the wirelessIfWORPStats table. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.1 |
| wirelessIfWORPStatsRegistrationRejects This parameter displays the number of registration reject messages sent (base)
or received (satellite) on WORP interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.10 |
| wirelessIfWORPStatsAuthenticationRequests This parameter displays the number of authentication request messages sent
(satellite) or received (base) on WORP interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.11 |
| wirelessIfWORPStatsAuthenticationConfirms This parameter displays the number of authentication confirm messages sent
(base) or received (satellite) on WORP interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.12 |
| wirelessIfWORPStatsRegistrationAttempts This parameter represents the number of times a Registration Attempt has been
initiated. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.13 |
| wirelessIfWORPStatsRegistrationIncompletes This parameter represents the number of registration attempts that is not
completed yet. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.14 |
| wirelessIfWORPStatsRegistrationTimeouts This parameter represents the number of times the registration procedure
timed out. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.15 |
| wirelessIfWORPStatsRegistrationLastReason This parameter represents the reason for why the last registration was aborted
or failed. | column | Enumeration | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.16 |
| wirelessIfWORPStatsPollData This parameter represents the number of polls with data messages sent
(base) or received (satellite). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.17 |
| wirelessIfWORPStatsPollNoData This parameter represents the number of polls with no data messages sent
(base) or received (satellite). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.18 |
| wirelessIfWORPStatsReplyData This parameter represents the number of poll replies with data
messages sent (satellite) or received (base). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.19 |
| wirelessIfWORPStatsAverageLocalSignal This parameter displays the current signal level calculated over all inbound
packets. | column | Integer32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.2 |
| wirelessIfWORPStatsReplyMoreData This parameter represents the number of poll replies with more data messages sent
(satellite) or received (base). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.20 |
| wirelessIfWORPStatsReplyNoData This parameter represents the number of poll replies with no data messages sent
(satellite) or received (base). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.21 |
| wirelessIfWORPStatsPollNoReplies This parameter represents the number of times a poll messages were sent but no
reply was received. The parameter in valid only on BSU. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.22 |
| wirelessIfWORPStatsSendSuccess This parameter displays the number of data messages sent and acknowledged
by the peer successfully. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.23 |
| wirelessIfWORPStatsSendFailures This parameter displays the number of data messages that requires re-transmission.
These frames are not acknowledged by the peer. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.25 |
| wirelessIfWORPStatsReceiveSuccess This parameter displays the number of data messages received and acknowledged
successfully. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.26 |
| wirelessIfWORPStatsReceiveRetries This parameter displays the number of successfully received re-transmitted data
messages. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.27 |
| wirelessIfWORPStatsReceiveFailures This parameter displays the number of data messages that were not received
successfully. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.28 |
| wirelessIfWORPStatsProvisionedUplinkCIR This parameter provides information about the total assigned (provisioned)
uplink Committed Information Rate(CIR) including all SUs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.29 |
| wirelessIfWORPStatsAverageLocalNoise This parameter displays the current noise level calculated over all inbound packets. | column | Integer32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.3 |
| wirelessIfWORPStatsProvisionedDownlinkCIR This parameter provides information about the total assigned (provisioned)
downlink Commtied Information Rate(CIR) including all SUs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.30 |
| wirelessIfWORPStatsProvisionedUplinkMIR This parameter provides information about the total assigned (provisioned)
uplink Maximum Information Rate(MIR) including all SUs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.31 |
| wirelessIfWORPStatsProvisionedDownlinkMIR This parameter provides information about the total assigned (provisioned) downlink
Maximum Information Rate(MIR) including all SUs. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.32 |
| wirelessIfWORPStatsActiveUplinkCIR This parameter provides information about the total active uplink Committed Information Rate(CIR). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.33 |
| wirelessIfWORPStatsActiveDownlinkCIR This parameter provides information about the total active downlink Committed Information Rate(CIR). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.34 |
| wirelessIfWORPStatsActiveUplinkMIR This parameter provides information about the total active uplink Maximum Information Rate(MIR). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.35 |
| wirelessIfWORPStatsActiveDownlinkMIR This parameter provides information about the total active downlink Maximum Information Rate(MIR). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.36 |
| wirelessIfWORPStatsCurrentUplinkBandwidth This parameter provides information about the current bandwidth utilization on the uplink direction. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.37 |
| wirelessIfWORPStatsCurrentDownlinkBandwidth This parameter provides information about the current bandwidth utilization on the downlink direction. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.38 |
| wirelessIfWORPStatsAverageRemoteSignal This parameter displays the current signal level calculated over the inbound packets
received at the peer end. | column | Integer32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.4 |
| wirelessIfWORPStatsAverageRemoteNoise This parameter displays the current noise level calculated over the inbound packets
received at the peer end. | column | Integer32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.5 |
| wirelessIfWORPStatsRemotePartners This parameter displays the number of remote partners. For a satellite, this parameter
will always be zero or one. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.6 |
| wirelessIfWORPStatsBaseStationAnnounces This parameter displays the number of Announcement messages sent (base) or received
(satellite) on WORP interface | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.7 |
| wirelessIfWORPStatsRequestForService This parameter displays the number of requests for service messages sent (satellite)
or received (base). | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.8 |
| wirelessIfWORPStatsRegistrationRequests This parameter displays the number of registration request messages sent (satellite)
or received (base) on WORP interface. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.841.1.1.3.4.2.1.1.9 |